New product of temperature detection sensor with code for detecting abnormal temperatures in various industrial equipment.

Detect abnormal temperatures in distribution board equipment / Temperature detection sensor for distribution boards

■Features of Temperature Detection Sensors for Distribution Boards 1. Continuously monitors and detects abnormal temperatures of electrical wires in the distribution board. 2. Continuously monitors and detects abnormal temperatures of power (control) equipment and electrical (load) equipment in the distribution board. 3. Inspection tasks for distribution board equipment can be performed by anyone, ensuring reliable and safe maintenance management. 4. Utilizes shape memory alloy (restoration) and electrical wires (softening) to create a short circuit (contact) between the two wire cores, detecting abnormal temperatures (maximum allowable temperature) and generating a signal. [Set temperature: 80°C] 5. A simple, easy-to-use product with good accuracy, featuring eco-friendly technology with zero standby power due to its switching function. 6. Capable of simultaneous temperature detection and signaling, with a simple circuit configuration (switching function) at a low cost. 7. Shape memory alloy has permanent memory, is rust-free, and retains its function indefinitely once activated. 8. Operates through a physical action that requires no power, ensuring no malfunction and allowing for swift, accurate use over many years. 9. Enables direct temperature detection without the need for measuring instruments. 10. Non-resettable, allowing for confirmation after activation. (Once triggered, it cannot be reactivated. The activated location can be deleted and reconnected.)

• power supply
• Control Panel
• Distribution Board

Detecting abnormal heat (abnormal temperature) of the storage battery with standby power at 0 / New product for temperature detection sensors for storage batteries.

■Features of Temperature Detection Sensors for Storage Batteries 1. It can monitor and detect abnormal heat generation (abnormal temperature) of storage batteries on a daily basis. 2. It can monitor and detect abnormal temperatures of the wiring and electrical equipment in the charging/discharging circuits of storage battery systems on a daily basis. 3. Inspection tasks for storage battery systems can be performed by anyone, ensuring reliable and safe maintenance management. 4. By utilizing shape memory alloys (restoration) and wires (softening) to create a short circuit (contact) between the two wires, it detects abnormal temperatures (maximum allowable temperature) and generates a signal. [Set temperature 70°C] 5. It is a simple, easy-to-use, and accurate eco-technology product with zero standby power due to its switching function. 6. It can simultaneously detect temperature and generate signals, with a simple circuit configuration (switching function) at a low cost. 7. Shape memory alloys have permanent memory, are rust-free, and maintain their state indefinitely once activated. 8. The operation is a physical action that does not require power, ensuring no malfunction and allowing for swift, accurate use over many years. 9. Direct temperature detection is possible without the need for measuring instruments. 10. It is a non-resettable type that allows for confirmation after activation. (Once sensing is activated, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Lithium-ion battery
• Solar power generator
• Fuel Cells

New product for temperature detection sensor that can detect the maximum allowable temperature of electric wires (abnormal temperature).

■Features of Temperature Detection Sensors 1. Monitors abnormal temperatures of electrical wires on a daily basis and can detect abnormal temperatures. 2. Monitors and detects abnormal temperatures of power (control) equipment and electrical (load) equipment on a daily basis. 3. Can be wired similarly to electrical wires in electrical equipment. 4. Utilizes shape memory alloy (restoration) and wire (softening) to detect abnormal temperatures by short-circuiting (contacting) the two wire cores, generating a signal. The set temperature is 70°C. 5. A simple, easy-to-use product with good accuracy, featuring eco-technology with zero standby power due to its switching function. 6. Capable of detecting temperature and generating signals simultaneously, with a simple circuit configuration (switching function) at a low cost. 7. Shape memory alloy has permanent memory, is rust-free, and retains its state indefinitely once activated. 8. Operates through a physical action that requires no power, ensuring no malfunction and allowing for swift, accurate use over many years. 9. Enables direct temperature detection without the need for measuring instruments. 10. Can be used for wiring both indoors and outdoors. 11. Non-return type allows for confirmation after operation. (Once sensing is activated / cannot be reactivated. Delete the activated location and change the connection.)

• Sensors
• Safety Sensors
• Other safety equipment

New product for temperature detection sensors for power generation that detects abnormal temperatures in electrical equipment of solar power generation systems.

■Features of Temperature Detection Sensors for Power Generation 1. Monitors and detects abnormal temperatures in the power supply circuit's wiring on a daily basis. 2. Monitors and detects abnormal heating (abnormal temperatures) in control devices, load devices, and storage batteries on a daily basis. 3. Inspection tasks for electrical circuits can be performed by anyone, ensuring reliable and safe maintenance management. 4. Monitors abnormal temperatures in the electrical equipment of solar power generation systems on a daily basis, preventing equipment damage and fire, thus ensuring safe power supply. 5. Utilizes shape memory alloy (restoration) and wiring (softening) to detect abnormal temperatures (maximum allowable temperature) by short-circuiting (contacting) the two-wire core, generating a signal. [Set temperature 70°C] 6. A simple, easy-to-use, and highly accurate eco-technology product with zero standby power due to its switching function. 7. Capable of simultaneous temperature detection and signaling, with a simple circuit configuration (switching function) at a low cost. 8. Shape memory alloy has permanent memory, is rust-free, and retains its function indefinitely once activated. 9. Operates through a physical action that requires no power supply, ensuring no malfunction and allowing for swift, accurate use over many years. 10. Enables direct temperature detection without the need for measuring instruments. 11. Non-return type allows for confirmation after activation. (Once sensing is activated / cannot be reactivated. Delete the activated location and change the connection.)

• Sensors
• Safety Sensors
• Other safety equipment

Detection of abnormal temperatures in electric vehicle (EV) electrical equipment circuits / New product for temperature detection sensors for EVs

1. The abnormal temperature of the power circuit's wires can be monitored and detected on a daily basis. 2. The abnormal heat generation (abnormal temperature) of control devices, load devices, and storage batteries can be monitored and detected on a daily basis. 3. The inspection of electrical circuits can be performed by anyone. Additionally, maintenance management can be carried out reliably and safely. 4. It is possible to prevent fires caused by abnormal temperatures in electrical equipment that could lead to recalls. 5. Safety management for electric vehicles (EVs) is enhanced, allowing for safe driving of electric vehicles (EVs). 6. By utilizing shape memory alloys (restoration) and wires (softening) to create a short circuit (contact) between two wires, abnormal temperatures (maximum allowable temperature) can be detected and signaled. [Set temperature 70°C] 7. This is an eco-technology product that is simple, easy, accurate, and has a switching function that results in zero standby power. 8. It can detect temperature and signal simultaneously, with a simple circuit configuration (switching function) at a low cost. 9. Shape memory alloys have permanent memory, are rust-free, and maintain their state once activated indefinitely. 10. Operation is a physical action that does not require power, has no malfunction, and can be used for many years with speed and accuracy. 11. Temperature detection can be performed directly without the need for measuring instruments. 12. It is a non-reset type that allows for confirmation after operation. (Once activated by detection / cannot be reset. Delete the activated area and change the connection.)

• Sensors
• Safety Sensors
• Other safety equipment

New product of fire memory sensor integrated with a combination of electric wires and shape memory alloy.

This product is a fire memory sensor with a set temperature of 80°C. It features a shape memory alloy attached to a wire in a coiled form, creating an integrated product. When the surrounding temperature reaches 80°C, the wire softens, and the shape memory alloy constricts the wire (restoring it) to short-circuit the two wires, generating a temperature sensing signal (80°C). It can be installed in equipment or locations at risk of fire, alerting the surroundings with alarms to prevent fires and providing daily monitoring with zero standby power for the switching function, making it an eco-friendly technology product. It is a non-resettable type, allowing for fire confirmation after activation. This product meets the performance standards of type 1 fixed temperature detectors (120 seconds) as specified by fire safety regulations. Set temperature: 80°C. ■ Contact information regarding this matter 2-2-8 Minami Tsutsujigaoka, Kameoka City, Kyoto Prefecture, 621-0847 Space Works Contact: Wada wadakame@siren.ocn.ne.jp TEL: 0771-25-3430 / FAX: 0771-25-4932

• Sensors
• Safety switch
• Safety Sensors

Eco technology utilizing the restoration of shape memory alloys and the softening of electric wires / New product of temperature memory sensors

■Features of Temperature Memory Sensor 1. It operates through physical action without the need for power supply or measuring instruments, allowing direct temperature sensing and signal generation. 2. The operation allows for direct temperature detection through physical action, and the circuit configuration can be simple and low-cost. 3. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 4. It can continuously monitor various abnormal temperatures. 6. This product integrates shape memory alloy with the wire. Set temperature (80°C). 7. It utilizes the softening of the wire and the recovery of the shape memory alloy to short-circuit the two wires for temperature sensing and signal generation. 8. It is an eco-friendly technology product with zero standby power due to its switching function. 9. The shape memory alloy has permanent memory, is rust-free, and retains its state permanently once activated. 10. This product meets the performance standards of fixed temperature type detectors as specified by fire safety regulations (120 seconds). 11. It is a non-resettable type that allows for confirmation after activation. ■Contact Information for Inquiries 2-2-8 Minami Tsutsujigaoka, Kameoka City, Kyoto Prefecture, 621-0847 Space Works Contact: Wada wadakame@siren.ocn.ne.jp TEL: 0771-25-3430 / FAX: 0771-25-4932

• Sensors
• Sensors
• Safety Sensors

● The production time for casting prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly creating sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be created in a single molding process. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

This time, the ACS-5000 is available as a facial recognition terminal compatible with FaceMe Security's add-on feature "Face Terminal," enabling access control management that combines "advanced anti-spoofing features" with high-speed facial recognition powered by edge AI. ■ Main Features 1. Accelerated Authentication Processing FaceMe Security is optimized for the MediaTek Genio 700's NPU, achieving faster facial recognition processing and reduced CPU load compared to processing solely on the CPU. It ensures stable authentication without delays even during peak times such as clocking in and out, contributing to alleviating congestion. 2. Advanced "Anti-Spoofing" Optimized for the IR + RGB camera mounted on the ACS-5000, it can quickly detect fraudulent authentication using photos, videos, or 3D masks within 0.6 seconds, ensuring reliable identity verification. 3. Door Control Without Additional Equipment FaceMe Security can directly control the digital I/O of the ACS-5000, allowing for the construction of an access control management system without the need for additional equipment. This simplifies system configuration and reduces implementation costs.

This is an air leak tester for battery cases of electric vehicles (EVs). The battery case has the characteristic of being "large with a significant internal volume, and its structure may deform due to internal pressure." As a result, air leak testing generates "noise caused by its large size and capacity" and "noise caused by expansion or deformation due to internal pressurization." To mitigate this noise, this device features a newly developed smoothing function and a linear fitting correction function used in combination during measurement. Additionally, to achieve low-pressure control that is difficult to manage and to expand flow for large volumes, we provide a bypass box (CBU-600) equipped with an electro-pneumatic regulator for precise pressure control and a pressurization valve with a large effective diameter to supply high flow rates. Measurement methods: Work-Work comparison, Work-Master comparison, Fixed Master comparison Measurement pressure range: 10 kPa, 20 kPa, 50 kPa (depending on specifications) Gauge pressure sensor accuracy: ±2% F.S. Differential pressure sensor accuracy: ±0.5% F.S. Group settings: 0 to 31 groups Power supply voltage / Power consumption: AC100 to 240 V / 100 VA

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!