〇Product information released〇 4-axis simultaneous drive spin coater (spin coating machine) 'ACT-220AII-4axis' (desktop type for manual dripping) by Active.

Increased productivity! The ACT-220AII-4axis tabletop spin coater with simultaneous 4-axis drive is now available from the manufacturer Active!

Introducing the tabletop spin coater 'ACT-220AII-4axis' with 4-axis simultaneous drive. It is capable of 2-axis, 3-axis, and 4-axis simultaneous processing (startup) and can spin coat 4 pieces at the same time, despite being a sheet-type machine. If you are processing small substrates (for round substrates up to φ100 and square substrates up to □70mm), please consider this machine. The rotation speed can be set in the range of 0 to 6000 RPM, with an accuracy of ±1 RPM or better. You can simultaneously set "rotation speed," "acceleration/deceleration time," and "keep time" for one step, and it features a program with 10 steps and 100 patterns (with prior notice, 20 steps and 50 patterns, or 50 steps and 20 patterns are also possible), making it easy to meet your desired conditions. Equipped with an interlock sensor, it will not rotate unless it detects the vacuum suction pressure on the substrate, and it automatically stops rotating if the safety cover opens while in operation, ensuring safety. Additionally, it has an emergency stop button that stops the machine in free run mode. The operation panel is simple and easy to use. It comes with a clear manual, allowing you to start using it immediately after delivery. For more detailed information about the ACT-220AII-4axis, please access the link below!

• Other semiconductor manufacturing equipment

Thank you for your continued support. This is Nippon Kernel System Co., Ltd. We are sending you the 45th issue of the Epsilon Newsletter along with information on recommended pavilions for the Osaka-Kansai Expo from our employees. The distribution is later than usual due to last week's summer holiday period. ─▼──────────────────────────────── Table of Contents [1] A new automatic testing system has been completed [2] The catalog for "R Load Device and LC Load Device" has been updated [3] Editor's Note ─▲──────────────────────────────── You can view the continuation on our company website.

On August 22, 2025, an interview article titled "Achieved with PEEK Material | Gutenberg's GZERO MP1 Featuring High Strength, High Precision, and Desktop Size" was published by ShareLab.

The industrial PC "BXA-CN3B1N" manufactured by Hagiwara Solutions has completed the operational evaluation of the real-time OS "INtime" and is now INtime Ready!! For more details, please visit the following pages. About INtime Ready https://www.mnc.co.jp/INtime/INtimeReady.htm Pre-installed PC page https://www.mnc.co.jp/SI/preinstallpc.htm PC evaluation page https://www.mnc.co.jp/INtime/PC_Eval_report.html

Details of the FaceMe Security 8.3 Update < Revamped UX for Action & Alert Rule Settings > Previously, individual settings were required for each action even under the same rule. By completely overhauling the UI and UX, we have transformed the operation screen to allow for intuitive and efficient configuration. ▶ Key Update Points - Multiple actions (notifications, access control, VMS integration, etc.) can now be configured under a single rule. - The settings screen has been consolidated into a single page, allowing for an overview and editing of the entire configuration at a glance. < Enhanced Integration Features with Face Terminal (Facial Recognition Terminal) > FaceMe Security integrates with the MSK Knoctoi series (Standard/Lite), enabling door opening and closing based on facial recognition results without the need for additional devices. This update allows for detailed configuration of door opening and closing rules based on location, time of day, and groups of individuals, enabling more flexible access management tailored to on-site operations. ▶ Expected Implementation Scenarios - All employees can enter the entrance, while only administrators can enter specific areas at night, etc.

[To the owners of parking lots and parking lot construction companies] "I’m worried about not colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures using various sensors and alerts the surroundings with LED lights and buzzers. The device consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *Please note that a separate control panel is required to include the controller and switching power supply (24V) when using the exit warning system. *We kindly ask that customers arrange for the switching power supply (24V), LED rotating light, control panel, circuit breakers, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. We hope this will contribute to safer vehicle passage for everyone. ◎ For more details, please contact us or download the catalog.