What is the best material for a draft chamber?

Custom production available! Can be easily installed on experimental tables and other surfaces! Ideal for laboratories with limited installation space.

The tabletop draft chamber is a type that can be easily installed on experiment tables and is suitable for laboratories with limited installation space. We offer three types of products: "FDV-DT" made of vinyl chloride, "NXB-DT" made of steel, and "FHS-DT" made of stainless steel. You can choose from four sizes for the main body opening: 900mm, 1200mm, 1500mm, and 1800mm. 【Features】 ■ Can be easily installed on experiment tables and similar surfaces ■ Ideal for laboratories with limited installation space *For more details, please refer to the PDF document or feel free to contact us.

• Draft chamber

Custom production available! Can be easily installed on experiment tables and similar surfaces! Ideal for laboratories with limited installation space.

The tabletop draft chamber is a type that can be easily installed on laboratory tables and is suitable for laboratories with limited installation space. We offer three types of products: "FDV-DT" made of PVC, "NXB-DT" made of steel, and "FHS-DT" made of stainless steel. You can choose from four sizes for the main opening dimensions: 900mm, 1200mm, 1500mm, and 1800mm. 【Features】 ■ Can be easily installed on laboratory tables ■ Ideal for laboratories with limited installation space *For more details, please refer to the PDF document or feel free to contact us.

• Draft chamber

Custom production available! Can be easily installed on experiment tables and similar surfaces! Ideal for laboratories with limited installation space.

The tabletop draft chamber is a type that can be easily installed on experiment tables and is suitable for laboratories with limited installation space. We offer three types of products: "FDV-DT" made of PVC, "NXB-DT" made of steel, and "FHS-DT" made of stainless steel. You can choose from four patterns for the main body opening dimensions: 900mm, 1200mm, 1500mm, and 1800mm. 【Features】 ■ Can be easily installed on experiment tables and similar surfaces ■ Ideal for laboratories with limited installation space *For more details, please refer to the PDF document or feel free to contact us.

• Draft chamber

Custom production available! It is possible to use large floor-standing experimental equipment! Three types of exterior materials for the main body are available.

The walk-in draft chamber is a type that allows the use of large floor-standing experimental equipment. You can choose from three types: "WNV" made of PVC, "WNB" made of steel, and "WNS" made of stainless steel. The working sash height is 400mm, with the height of the PVC version being 2100mm and the height of the steel/stainless steel versions being 2300mm. 【Features】 ■ Available in three types: PVC, steel, and stainless steel ■ Capable of accommodating large floor-standing experimental equipment *For more details, please refer to the PDF materials or feel free to contact us.

• Draft chamber

Custom production available! It is possible to use large floor-standing experimental equipment! Three types of exterior materials for the main body are available.

The walk-in draft chamber is a type that allows the use of large floor-standing experimental equipment. You can choose from three types: PVC "WNV," steel "WNB," and stainless steel "WNS." The working sash height is 400mm, with the PVC version having a height of 2100mm, and the steel/stainless steel versions having a height of 2300mm. 【Features】 ■ Available in three types: PVC, steel, and stainless steel ■ Capable of accommodating large floor-standing experimental equipment *For more details, please refer to the PDF document or feel free to contact us.

• Draft chamber

Custom production available! It is possible to use large floor-standing experimental equipment! Three types of exterior materials for the main body are available.

The walk-in draft chamber is a type that allows the use of large floor-standing experimental equipment. You can choose from three types: "WNV" made of PVC, "WNB" made of steel, and "WNS" made of stainless steel. The working sash height is 400mm, with the height of the PVC model being 2100mm and the height of the steel/stainless steel models being 2300mm. 【Features】 ■ Available in three types: PVC, steel, and stainless steel ■ Capable of accommodating large floor-standing experimental equipment *For more details, please refer to the PDF document or feel free to contact us.

• Draft chamber

The inner wall material is made of non-asbestos fireproof material and heat-resistant vinyl chloride!

The "NXB-AC" is a steel acid decomposition draft chamber. It is suitable for research laboratories conducting acid decomposition work. The inner walls and working surfaces are selected considering corrosion resistance and heat resistance. Additionally, you can choose the shape and number of gas valves and outlets. Please feel free to consult us when you need assistance. 【Lineup】 ■NXB-09-AC: W900×D850×H2300mm ■NXB-12-AC: W1200×D850×H2300mm ■NXB-15-AC: W1500×D850×H2300mm ■NXB-18-AC: W1800×D850×H2300mm *For more details, please refer to the PDF document or feel free to contact us.

• Draft chamber

Custom production available! (Material changes are also possible!) The exterior is made of cold-rolled steel sheet (SPCC) with powder-coated paint! It is made of steel and can accommodate large equipment integration.

The "NXB-L" is a low working surface draft chamber made of steel. It features a low working surface, a large opening height of the front glass, and a high internal ceiling, allowing for the incorporation of large equipment. The exterior is made of cold-rolled steel plate (SPCC) with powder coating, and the interior walls are available in N (non-asbestos fireproof material), S (stainless steel), and V (vinyl chloride). Please feel free to contact us for inquiries. 【Features】 ■ Low working surface ■ Large opening height of the front glass and high internal ceiling ■ Options - Fan, variable air volume inverter, ultra-high color rendering (Ra98) LED fluorescent lights, and more * For more details, please refer to the PDF materials or feel free to contact us.

• Draft chamber

Custom production available! (Material changes are also possible!) Introducing products with indicator lights for draft operation! Made of steel with powder coating.

The "NXB-B" is a steel double-sided draft chamber. It is a centrally installed model with a wide depth that allows work to be performed simultaneously from both sides. The exterior is made of cold-rolled steel plate (SPCC) with powder-coated finish. Options available include a blower, an inverter for variable air volume, and ultra-high color rendering (Ra98) LED fluorescent lights for color inspection. Please feel free to consult with us when placing an order. 【Lineup】 ■NXB-09-B: W900×D1500×H2300mm ■NXB-12-B: W1200×D1500×H2300mm ■NXB-15-B: W1500×D1500×H2300mm ■NXB-18-B: W1800×D1500×H2300mm *For more details, please refer to the PDF document or feel free to contact us.

• Draft chamber

Custom production available! Resistant to corrosive gases and does not rust! Widely used in chemical laboratories, clinical testing laboratories, schools, etc.

We would like to introduce our standard PVC draft chamber, the 'FDV/FDHV'. The front sliding doors can stop at any height due to the balance weight system. Additionally, they are resistant to corrosive gases and do not rust. The 'FDV' is made of PVC, while the 'FDHV' is made of heat-resistant PVC. Please feel free to contact us if you need any assistance. 【Features】 ■ Front sliding doors with balance weight system ■ Made of PVC *For more details, please refer to the PDF document or feel free to contact us.

• Draft chamber

Custom production available! The work surface is stainless steel! Uses safety reinforced glass to prevent accidental incidents.

The "FHS" is a standard stainless steel draft chamber widely used in chemical laboratories, clinical testing rooms, schools, and more. The front sliding doors can be stopped at any height using a balance weight system. Additionally, it is made with safety tempered glass to prevent accidental incidents. Please feel free to contact us when you need assistance. 【Features】 ■ The front sliding doors can be stopped at any height using a balance weight system. ■ Made with safety tempered glass. ■ Stainless steel (SUS304). *For more details, please refer to the PDF document or feel free to contact us.

• Draft chamber

The balance door uses safety reinforced glass! Ideal for research laboratories with a high risk of fire and explosion. Custom production is possible!

The "NXS" is a draft chamber with a steel exterior and an interior wall made of SUS304 stainless steel. It is suitable for research laboratories where there is a high risk of fire and explosion due to the use of flammable and ignitable gases and liquids. All electrical equipment used is explosion-proof and pressure-resistant, designed to prevent ignition from electrical sparks, and the main body is completely non-combustible. Please feel free to contact us when you need assistance. 【Features】 ■ All electrical equipment is explosion-proof and pressure-resistant ■ The main body is completely non-combustible ■ Work surface materials are available in stainless steel and ceramic style *For more details, please refer to the PDF materials or feel free to contact us.

• Draft chamber

The sliding door at the front can slide up and down with a balance weight system! It can stop at any desired height and is available for custom production!

The "NXB" is a standard steel draft chamber widely used in chemical laboratories, clinical testing rooms, schools, and more. The front sliding doors can be stopped at any height using a balance weight system, and they are made of safety reinforced glass to prevent accidental incidents. Please feel free to contact us if you have any inquiries. 【Lineup】 ■NXB-09: W900×D850×H2300mm ■NXB-12: W1200×D850×H2300mm ■NXB-15: W1500×D850×H2300mm ■NXB-18: W1800×D850×H2300mm *For more details, please refer to the PDF materials or feel free to contact us.

• Draft chamber

Steel construction with cold-pressed steel sheet powder coating! Safety tempered glass balance door.

We would like to introduce our draft chamber (inner wall made of PVC) 'NXV/NXHV'. The outer material of the main body is made of steel (powder-coated). The balance door uses safety reinforced glass with a balance weight system. Additionally, the inner wall of the 'NXHV' is made of heat-resistant PVC. Please feel free to consult us when you need assistance. 【Options (partial)】 ■ Blower ■ Inverter for variable air volume ■ Ultra high color rendering (Ra98) LED fluorescent light for color inspection *For more details, please refer to the PDF document or feel free to contact us.

• Draft chamber

The glass pot lid has a hydrophilic heat-resistant coating, allowing you to check the cooking state without any fogging.

SPACECOOL Co., Ltd. is pleased to announce its support for the purpose of the newly established memorial day "Day to End the Too Hot Summer" by the Japan Climate Leaders Partnership (JCLP). In order to address the increasingly severe heat waves, we will continue to promote the expansion of our zero-energy cooling radiative cooling material "SPACECOOL." JCLP has registered August 8, 2025, and every August 8 thereafter, as "Day to End the Too Hot Summer" with the Japan Anniversary Association. — What is the new memorial day "Day to End the Too Hot Summer"? In recent times, many regions in Japan have been experiencing consecutive days of extreme heat, and the impacts of climate change are manifesting in serious ways in our lives. Nevertheless, reports and discussions linking this to "climate change" are limited, and there is currently a lack of momentum for climate change measures. In response to this issue, JCLP has decided to establish the "Day to End the Too Hot Summer" during this hottest time of the year, creating a social impetus to reframe "heat" as a climate change issue. This memorial day aims to share the commitment to halt the climate crisis for future generations and serve as a starting point for advancing the systemic transformation of society as a whole.

Are you making progress on measures for the "2024 Problem"? With stricter management of drivers' working hours, reducing "waiting time" has become an urgent issue in the logistics field. To address this challenge, our company, Hotron, proposes the "Vehicle Detection Ultrasonic Sensor 'HM-UX2'," which instantly grasps the availability of loading bays. The 'HM-UX2' contributes to the resolution of waiting times by accurately understanding the availability situation, reducing unnecessary waiting and queueing, and shortening waiting times to alleviate the burden on drivers! By replacing the "eyes" of your loading bay management with this high-precision sensor, why not start addressing the "2024 Problem"? Take a look at the product features: "Can it accurately detect availability?" "Can we really use it in our company?" "I just want to know the cost, even if it's an estimate." If you have any questions or requests, please feel free to consult with us.

The following cameras are supported in the Elua 7.6 series. Product introduction: https://aileunsys.co.jp/b01_aileun.html Compatible camera list: https://aileunsys.co.jp/aileun/compatible_camera.html Newly added: - Manufacturer: DAHUA Model number (1 model): DH-IPC-HFW2449TLN-S-PRO

Dear Valued Customers, Thank you very much for your continued support. We would like to inform you that our company will be closed for summer vacation from Wednesday, August 13, 2025, to Friday, August 15, 2025. We will resume normal operations on Monday, August 18. We appreciate your understanding and cooperation.