Thank you for the numerous inquiries! ASENT and SSENT are planned! Compliant with SAE standard J2716! Adopted in the advanced development of 20 automotive equipment manufacturers.
This is a notice from Serizawa System Research Co., Ltd. regarding the "SENT/SPC TOOL." If you want to easily implement SENT communication, this is it! The price has dropped below 200,000 yen! Due to its great popularity, many car manufacturers and Tier 1 and 2 manufacturers have adopted it! We are sequentially supporting TSENT, ASENT, and SSENT. This device is a module that generates SENT communication signals. It has 2-channel output (expandable to 6 channels). There are no similar products in Japan. It complies with SAE J 2716. Our company has been manufacturing SENT signal generation devices since the standardization began in 2007, and we have developed a series of products including SENT signal reception confirmation devices and SENT communication failure generation devices. (We have obtained the standard documents from overseas and are compliant with the 2010 version. The 2016 version is currently under review.) "If you want to try it out," "If you want to check if it can be easily set up," or "If you want to confirm that it can do what you want before purchasing," please check the availability right away, and we will send you a demo unit! ☆ For detailed specifications or inquiries, please feel free to contact us at the link below. https://serizawa-sr.co.jp/contact-1
Inquire About This Product
basic information
～SENT/SPC SIGNAL GENERATOR (SENT TOOL)～ 【Features】 ○ Using the included software, configuration data can be written from a PC. ○ After writing, it can operate independently. ○ It can be used to convert existing equipment's analog output or pulse output into SENT signals. ○ Simple faults registered on the PC can be generated by turning on a switch. ☆ For detailed specifications or inquiries, please feel free to contact us below. https://serizawa-sr.co.jp/contact-1 【Technical Support】 ○ We provide thorough technical support. Please let us know what you would like to do. ○ You can check if it is possible with a demo unit. ○ If specification changes are necessary: If it is considered a standard specification, we will upgrade it free of charge. For special specifications, we will accommodate through customization. 【Expanding Functions!】 ○ We are developing a VI to enable control from LabVIEW. ○ We will sequentially support ASENT, SSENT, and TSENT. Custom products support ASENT, SSENT, and TSENT.
Price information
198,000 *Direct sales price!* *Price revision on June 29, 2015! We have lowered the price in gratitude for the numerous inquiries!*
Price range
P3
Delivery Time
P4
※*2ch is available for immediate delivery! We are urgently increasing production! *Demo units are also available!
Applications/Examples of results
<Example 1> Use of Conventional Equipment We were inputting analog signals into the automotive ECU for testing and inspection, but with the digitization of sensors, the conventional equipment became unusable. ⇒ In such cases ⇒ Insert SENTTOOL between the existing equipment and the ECU to convert the signals from the existing equipment into SENT signals, allowing the use of existing equipment and patterns. <Example 2> Sensorless ECU Development Building an environment to operate actual sensors is challenging. ⇒ In such cases ⇒ Please use this device as a substitute for the sensor. ECU development can be done without the sensor's operating environment. You can set the sensor signal patterns on a PC. <Example 3> Sensor Characteristic Evaluation How can we confirm whether the signals from the sensor under development are correct...? ⇒ In such cases ⇒ By comparing the actual sensor signals with the signals from this device, you can evaluate the delay and characteristics of the sensor signals. <Example 4> Behavior Evaluation During Failures I need not only normal signals but also failure signals... ⇒ In such cases ⇒ Select a pre-registered failure mode and easily trigger a failure by turning on the switch.
Line up（2）
| Model number | overview |
|---|---|
| SENT Signal Receiving Device | Can be used for analyzing received data on the ECU side. |
| SENT Fault Generation Device | Detailed fault conditions such as tick count variations can be set. |
catalog（3）
Download All Catalogs
News about this product（1）
Company information
We are a custom manufacturer of electronic devices, characteristic testing machines, FA systems, and QA systems. Along with the history of our customers' product development, we develop and manufacture various devices and systems, including development equipment, performance testing machines, simulators, and process/shipping inspection machines. Our business areas span a wide range, including automotive, telecommunications, disaster prevention, and industry, and we are constantly engaged in technological development to meet the diverse needs of our clients.
