★Ultra-small Coating Machine★ Equipped with a standard vacuum suction plate, it can perform coating on a 100mm square area.
The Smart tabletop coater is a new product designed and developed based on customer needs that require coating a 100mm square area. The device size is A4, making it suitable for installation inside a glove box! The biggest feature is that the vacuum suction plate, which was previously an option, is now standard equipment. The movable speed ranges from 0.2 to 88 mm/sec, and the coating tools used are either A-Bar or applicators. Features of the tabletop coater TC-100S5: - Standard vacuum suction plate - Usable inside a glove box - Easy to use right after purchase - Anyone can replicate craftsmanship with just one button - Achieves stable coating at low speeds - Uses a glass base that can be washed thoroughly
Inquire About This Product
basic information
**Reasons to Choose Us** - We are a manufacturer that handles everything from design to production and sales domestically in Japan. → We respond quickly to emergencies and modifications with the unique support of a domestic manufacturer. - Affordable pricing. → The tabletop coater TC-100S5 is priced at 600,000 yen, and even including applications, it is under 1,000,000 yen. - Compact size that can be used inside a glove box. → The device size is approximately A4 size, making it usable in small glove boxes. - Easy operation. → Simply place the substrate, set the coating tool, decide on the speed, and you can start coating immediately. Just press the COAT button, and a beautiful film thickness is achieved. - Production of devices focused on the prototyping of secondary batteries. → Achieves coating up to 100mm square for applications such as lithium-ion batteries, fuel cells, and all-solid-state batteries. → Coating speeds can be as low as 0.2mm/sec for extremely slow coating. Maximum substrate mounting size: W160mm × D200mm Usable substrates: Film, glass, metal foil, concealment rate measurement paper, coated paper Coating tool: A-Bar or applicator Device size: W220mm × D350mm × H175mm Device weight: Approximately 8kg Utility: AC100–240V, 200VA
Price range
P4
Delivery Time
P4
※Since we are producing in lots, short delivery times are possible if there is stock available.
Applications/Examples of results
Battery testing purposes Lithium-ion batteries, fuel cells, solar cells, magnesium batteries, sodium batteries Primary batteries, secondary batteries, etc. Sheet prototyping Carbon nanotube sheets, carbon sheets, ceramic sheets Conductive films, release films, laminate films, etc. Coating evaluation Ink application, pigment application, UV-curable paint application, adhesive application, resin material application, etc. Various coatings
Detailed information
-
The vacuum suction cup is standard equipment. The Smart tabletop coater TC-100S5 comes with a vacuum suction cup as standard. This makes it easier to secure the substrate, improving work efficiency.
-
Coating Tool 1 Available for Use A-Bar can be used as a coating tool. Please refer to the specification table to select the gauge for the target film thickness.
-
Coating tool 2 available for use A variable applicator can be used. Your current applicator may also be usable. If you are using a coating tool from another manufacturer, please contact the manufacturer.
-
Available Coating Tool 3 A bird-type applicator suitable for high viscosity. This applicator is set up and used according to the desired film thickness from four pre-set slit width patterns. It is more affordable than variable applicators and is recommended for those with fixed film thickness conditions. It is easy to set conditions and has minimal error.
-
Brush with handle This is a brush for cleaning bar coaters, wire bars, and A-Bars. The tip of the cleaning brush is only 60μm. Since the minimum spot for the A-Bar is 60μm, using the brush can prevent residue of the coating liquid. Additionally, it can remove coating liquid from bar coaters and wire bars that could not be cleaned with conventional brushes.
-
Oval-shaped brush This is a brush for cleaning bar coaters, wire bars, and A-Bars. The tip of the cleaning brush is only 60μm. Because the minimum spot of the A-Bar is 60μm, cleaning with this brush can prevent residual coating liquid. Additionally, it can remove coating liquid from bar coaters and wire bars that could not be removed with conventional brushes.
-
This is a cooling and heating coating plate for the Smart tabletop coater TC-100S5. The cooling and heating coating plate for the TC-100S can reach a minimum temperature of -3 degrees (which may vary depending on the usage environment) and is used when cooling the slurry is desired. The purpose of this production was to meet the demand for use with two-component slurries that tend to cure rapidly at room temperature. It is used for various applications, such as suppressing curing achieved through cooling and managing the temperature of the slurry.
Line up（2）
| Model number | overview |
|---|---|
| TC-3S Type | This is the tabletop coater TC-3 type, capable of coating A4 size. For those who are looking to coat larger sizes, please take a look here. |
| TC-1SG Type | The tabletop coater TC-1 type is designed for large area coating and can handle evaluations up to A3 size. The coating tools that can be set up are similar to those of the tabletop coater series, and since tools from other manufacturers can also be installed, the coating tools you currently own will not go to waste. |
catalog（6）
Download All Catalogs
Company information
Throughout history, the advancement of science and technology sought by humanity knows no bounds. Today's prosperity is an achievement made possible by humans, cultivated through a relentless spirit of challenge and a continuous attitude of creating something new. This has been the theme of our company since its founding as a specialist in the industry. We approach the latest technologies with a pioneering spirit and are committed to developing original products that boast high precision and high reliability. However, no matter how advanced the environment becomes, technology must contribute to humanity, and technology cannot be discussed without humans. We believe that the future shape of technology lies in its closeness and harmony with humanity. In an era rich in hardware, humanity must be prioritized. Mitsui Electric Machinery aims for the "fusion of humanity and technology" and will continue to hold dreams for the coming century.