We will perform surface treatment on the SS400 plate using blasting.
We will perform surface treatment on SS400 plates using blasting. To improve the adhesion of the rubber that will be applied to the surface of the plates, we will carry out surface treatment with grit blasting. All tap holes are protected to prevent damage. ◎ SS400 (formerly SS41) This is the most widely distributed and representative material among general structural rolled steel. "SS" stands for Steel Structure, and "400" indicates the minimum guaranteed tensile strength. Due to its high distribution, it is cheaper compared to other metal materials and is available in a wide variety of types and sizes. ◎ Tap This refers to a tool used for cutting internal threads. The side where the thread goes in is called the internal thread, and the side that inserts is called the external thread. It has cutting edges and creates internal threads by rotating it while inserting it into a hole. A hole that has internal threads cut into it is called a "tap hole." ◎ Masking This means to cover or envelop. When performing blasting or painting, masking tape or caps are used to cover areas that will not be treated, protecting them from the process. Harada Ironworks Hiroshima Official Link
Inquire About This Product
basic information
[Product Information] PL30t 1200×1200 [Surface Preparation] Grid Blast SSPC SP-10 [Anti-Corrosion Section] Metals naturally rust in the atmosphere and in water, which not only detracts from the product's appearance but also adversely affects the performance of the metal in various ways. In recent years, significant technological advancements have led to the development of highly durable paints. One essential surface treatment that must be performed before applying this paint is "shot blasting." No matter how durable the paint is, it cannot perform adequately without complete surface preparation, making shot blasting indispensable. Our company has been engaged in research and development of this "shot blasting" for many years in our anti-corrosion section. Harada Iron Works Co., Ltd. TEL: 082-232-2445 FAX: 082-293-0286 Contact: Tao Mobile: 090-3742-9768 Email: bousei@harada-tekkou.co.jp
Price range
Delivery Time
※The delivery time varies depending on the quantity, so please feel free to contact us.
Applications/Examples of results
Please feel free to contact us for consultations or estimates.
Detailed information
-
Turning customer troubles into satisfaction. We respond to such customer requests. From "nothing" to "something." Creating "one-of-a-kind" rather than "mass production." Harada Iron Works is dedicated to fulfilling those desires. To meet the diverse needs of our customers, we provide a consistent production service from material procurement to painting and installation, assisting in reducing lead times and total costs. With over 70 years of experience, we are committed to providing even greater "high added value" to our products through refined skills and know-how. 【We solve the following problems】 ◎ We want to prevent corrosion and paint peeling due to salt damage and moisture, and improve durability and quality. ◎ We want to remove rust and paint from previously manufactured products and repaint them for reuse. ◎ We want to perform surface treatment in the previous process to improve the adhesion of plating. ◎ Removing scale after heat treatment is difficult. ◎ We want to enhance the effectiveness of adhesives applied to metals and the performance of special coatings. ◎ We want to make scratches on stainless steel products less noticeable. If you have any questions regarding manufacturing or painting, please feel free to contact us. We look forward to hearing from you.
Line up（2）
| Model number | overview |
|---|---|
| Tank (In-house integrated construction) | [Product Information] Capacity: 30㎥ Weight: Approximately 4t. It has been coated with water-resistant paint to hold water inside, ensuring both aesthetics and practicality by distinguishing between the inner and outer surfaces. |
| In-house manufactured blast machine | The grid uses iron, and the sand is a non-metallic abrasive material. The grid is harder, resulting in a larger surface roughness and reduced construction time, making it suitable for large fabricated products and paint stripping. Conversely, the sand is softer than the grid, resulting in less surface roughness and minimal deformation for thin materials. Additionally, since it uses non-metallic abrasives, it can be applied even if the product is non-metallic. *For more details, please contact us. |
catalog（2）
Download All Catalogs
Company information
Our company manufactures products tailored to the diverse needs of various sites. We respond to customer requests with our capabilities, advantageous location, and thorough quality and delivery management. You can trust us with everything from material ordering to can manufacturing, processing, surface preparation, and painting. Additionally, we have dedicated many years to research and development in rust prevention, establishing a solid technology and facilities as a "rust prevention department," and we also perform tasks such as paint stripping. Please feel free to contact us with any requests.
![[In-house integrated production system] We also perform buff polishing and hairline finishing in-house.](https://image.mono.ipros.com/public/product/image/093/2000508081/IPROS20713234987224784898.jpeg?w=280&h=280)
![[Free Offer] Prevent Blade Troubles in Production Equipment! Non-Stick Thin Film Coating](https://image.mono.ipros.com/public/product/image/fde/2000612726/IPROS23915370847246220159.jpeg?w=280&h=280)
![[Surface Treatment Case] Surface treatment that streamlines the manufacturing process of lithium-ion batteries.](https://image.mono.ipros.com/public/product/image/604/2000700111/IPROS81671406460541521470.jpeg?w=280&h=280)
