Partial repair of the parking lot with 'Dented Flat Takumi Gray (with construction set)'
Partial repairs of depressions and uneven surfaces in asphalt and similar materials can be completed in one hour!
Mixing two materials together and pouring them into holes and uneven surfaces will complete the partial repair. The time from mixing the materials to setting is about 1 hour! You can perform repairs before business hours or during lunch breaks, and by the time business starts, it will have set enough for vehicles to pass. Hekomi Flat Artisan Gray is suitable for repairing concrete parking lots, ramps, etc. [Instructions] 1. Clean the area to be repaired (sweep out sand and debris as much as possible). 2. Add the liquid agent to the bag containing the aggregate and mix them together. (Twisting the opening of the bag while mixing increases its seal). 3. Pour the mixed material into the repair area. 4. Use a trowel or similar tool to level it out. (It becomes easier to smooth out after it has set for a little while). 5. Wait for about 40 minutes until it sets, and it's complete. *To ensure a clean repair area and prevent splatter marks, it is recommended to surround the repair area with masking tape before proceeding with the repair for a neat finish.
Inquire About This Product
basic information
【Product Overview】 *Same as Black and Gray 1 box contains 4 sets (4 sets of aggregate + hardener (liquid resin)) Weight: Approximately 20kg (about 5kg per set × 4 sets) 【Repairable Area Guidelines】 1m × 1m × 2.5mm (per set) *1 box can repair an area of 1 square meter to a thickness of 1cm. *Maximum curing thickness: 10cm 【Strength】 Compressive strength: 22-23 (N/mm²) *above 4 (N/mm²) Flexural strength: 8 (N/mm²) *below 15 (N/mm²) Adhesive strength: 1.5-1.6 (N/mm²) *above 1 (N/mm²) *The values marked are desired strength values 【Curing Time】 Approximately 40 minutes after mixing *The effective time may vary depending on the season. *The effective time is shorter in summer. 【Application Conditions】 Please remove dirt from the repair area before application. If water is pooled in the application area, it will not solidify properly. *It can be applied if it is slightly damp. The surface temperature of the application area should be between 5℃ and 60℃.
Price range
P2
Delivery Time
※In stock: Approximately 2 to 4 business days / Out of stock: 3 to 6 business days *Consultation required for orders of 10 boxes or more.
Applications/Examples of results
Frequent repair areas: Damage to customer parking lot and employee parking lot, uneven surfaces, ramp repairs.
catalog（2）
Download All Catalogs
Company information
Since its establishment in 1937 (Showa 12), Yachiyo Micro Science has been a specialized trading company for grinding and polishing materials, while also continuously engaging in product development related to grinding and polishing through its research and development department. We also operate the technical information sites "Grinding and Polishing .COM" and "Aglutinants .COM." Please take a look.
