Injection Cylinder Insulation Jacket

Added to bookmarks
Bookmarks list

Bookmark has been removed
Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration

last updated：Jun 21, 2016

シンワバネス

Official site

Insulation recommended by the heater manufacturer. 25mm thick, cuts power consumption by 40%!

By covering the band heater of the injection cylinder with an insulating jacket, heat radiation to the outside is prevented, enabling power reduction. When the surface temperature of the injection cylinder heater is 300°C, if an insulating jacket with a thickness of 25 mm is applied, the surface temperature will be approximately 60°C. This helps prevent burns when in contact with the surface and reduces the increase in radiant heat temperature in the work area, which is expected to improve work efficiency. Further power reduction of over 40% is possible, and a reduction in CO2 emissions is also anticipated. For more details, please contact us or refer to the catalog.

Inquire About This Product

basic information

【Energy-saving Effect Examples of Insulation Jackets】 By covering the band heater of the injection cylinder with an insulation jacket, we prevented heat radiation to the outside and reduced power consumption as follows. ◆ Energy-saving Effect Calculation - Energy saving from insulation jacket: Approximately 21.2% (injection cylinder section) - Power consumption of the injection cylinder heater: 7.0 KWh - Electricity cost: 15 yen/KWh - Operating time: 10 hours per day, 20 days per month, 240 days per year, then... *Power consumption reduction effect = 0.212 × 7.08 (KWh) × 15 (yen/KWh) × 10 (hours) × 240 (days) = 54,035 yen/year *CO2 reduction effect = 0.555 (Kg) × 0.212 × 7.08 (KWh) × 10 (hours) × 240 (days) = 2,000 Kg/year There are many other examples as well. You can confirm them by downloading the catalog.