Last Updated： Aggregation Period:Jul 23, 2025～Aug 19, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 23, 2025～Aug 19, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 23, 2025～Aug 19, 2025
This ranking is based on the number of page views on our site.
76～90 item / All 102 items
Due to the liquid accumulation, coating can be done with good yield.
By creating a pool of liquid inside the applicator, it is possible to create a coating that fits the width without exceeding the application width. It is used when a narrow application of 16mm is desired. It is also used when a consistent amount of application is needed or when producing test pieces efficiently with expensive coatings.
A stable coating with a certain film thickness can be obtained. It is a high cost-performance model with simple and high operability, without difficult operations.
The evaluation of coatings requires a stable film with the same thickness under the same conditions. An automatic film applicator can slide a bar coater or applicator at a constant speed and load, allowing for reproducible coating with a stable film thickness. This product is a simple device that pursues stable coating and ease of use. All operations can be performed on a touch panel screen, making it intuitive for anyone to operate. It can be operated with the included touch pen or with a finger. Coating speed and distance can be freely set, and up to eight original settings tailored to test pieces or samples can be memorized, allowing for coating under the same conditions immediately after turning on the power.
All operations can be performed on the touch panel screen! You can also freely set the coating speed and coating distance.
The "100 Series" is an automatic film applicator (desktop automatic coater). It can be operated via a touch panel, and the sample size can be freely set up to "A3 size." Additionally, the coating speed can be adjusted in increments of 1 mm per second. We offer a lineup including the glass plate "100-1," the vacuum chuck plate "100-3," and the heated vacuum chuck plate "100-5." 【Features】 ■ All operations can be performed on the touch panel screen ■ Coating speed and coating distance can be freely set ■ Achieves a coating range of up to approximately A3 size ■ Contributes significantly to reducing curing time and stabilizing the coating film by adding heating during coating ■ Up to 6 original settings tailored to test pieces or samples can be stored in memory, allowing for immediate coating under the same conditions upon powering on *For more details, please refer to the PDF document or feel free to contact us.
High-precision and highly reproducible film formation! Stable coating can be performed regardless of the material of the test specimen.
The "Small Automatic Film Applicator" is a new type of coating machine (desktop automatic coater) that miniaturizes the "100 series" and enhances its functionality. The coating distance is up to A4 size. The coating speed ranges from 1 to 200 mm/s, allowing for a wide range of speed adjustments from low to high speeds. We offer a lineup that includes the glass plate "101-1," the vacuum chuck plate "101-2," and the combined type of glass plate and vacuum chuck "101-3." 【Features】 ■ Coating distance is up to A4 size ■ Wide range of speed adjustments from low to high speeds ■ Load adjustment using weights is possible (up to 2000 gm) ■ The clamping part that holds the test piece can be finely adjusted to match the thickness of the test piece. It can accommodate thin test pieces like films and thick test pieces like glass plates when used in conjunction with the vacuum chuck plate. ■ Stable coating can be performed regardless of the material of the test piece. *For more details, please refer to the PDF document or feel free to contact us.
The film thickness to be applied can be adjusted in 1μm increments using a digital micrometer.
This product is a digital micrometer type film applicator with a film thickness adjustment function from the 064 series. The film thickness to be applied can be adjusted using a digital micrometer. The resolution is 1μm, allowing for free adjustment of the gap in 1μm increments. Additionally, the paint pouring guide creates a puddle of paint (sample) in front of the scraper, ensuring a continuous supply of paint during application, which enables a more stable coating without interruptions. 【Features】 - The film thickness to be applied can be adjusted using a digital micrometer. - The resolution is 1μm, allowing for free adjustment of the gap in 1μm increments. - Standard models have application widths of 100, 150, 200, 250, and 300mm. - Custom models can be manufactured with any desired application width (minimum 60mm to maximum 350mm). - The gap accuracy is ±2μm. - Custom models can be made in a paint pouring guide type (B/M type). *For more details, please refer to the related link page or feel free to contact us.
You can use it for various coating applications, such as research on battery electrodes.
It is a film applicator equipped with a micrometer head. It can be used for various applications such as ceramic tape casting and research on battery electrodes.
To achieve stable quality, the coating speed can be set in 1 mm/sec increments between 5-500 mm/sec! Compatible with various applicators/bar coaters.
The "Biko Drive XL/A3 Size Model" is an automatic coating device that allows for a high degree of freedom in coating settings for various liquid applications, including paints, inks, coatings, adhesives, and waterproofing materials. To achieve stable quality, the coating speed can be set between 5-500 mm/sec in increments of 1 mm/sec. Additionally, the push weight bar is designed to apply pressure across the entire applicator to maintain a consistent film thickness. 【Features】 ■ Speed adjustment can be set between 5-500 mm/sec or in increments of 1 mm/sec ■ Up to 6 programs can be set for speed, start and end points, etc. ■ Wide selection of applicators ■ Supports 8 languages including Japanese, English, and Chinese ■ Capable of coating samples up to A3 size *For more details, please refer to the PDF document or feel free to contact us.
We would like to introduce a screen applicator that can also be integrated into existing lines.
The "RSD" is an eco-friendly rotary screen applicator that utilizes a continuous circulation liquid supply method based on inclination. By using a rotary screen, it allows for easy control of the application amount and is compatible with a wide variety of substrates and coatings. It can also be integrated into existing lines. 【Features】 ■ Continuous circulation liquid supply method utilizing inclination ■ Easy control of application amount using a rotary screen, compatible with a wide variety of substrates and coatings ■ Can be integrated into existing lines *For more details, please refer to the external link page or feel free to contact us.
Quickly and easily apply labels! Contributes to labor and effort reduction.
Towa Corporation's label applicator 'APN-series' does not require any special processing (such as hole punching, slitting, or eye marks) on labels or backing sheets, allowing you to use labels issued directly from standard roll labels or barcode printers. No machine adjustments are necessary based on label size. As long as it falls within the specifications, it can accommodate labels of all sizes with a single unit. 【Features】 ■ No power supply required ■ Compatible with labels up to a maximum width of 100mm ■ Reliable, made in Japan *For more details, please feel free to contact us.
Quickly and easily apply labels with a label applicator!
The "AP Series" is a label applicator that does not require special processing for labels or backing sheets, allowing you to use labels issued by standard roll labels or barcode printers as they are. It does not require a power supply, so it can be used anywhere without concern for location, and within the specifications, it can accommodate various sizes of labels with a single unit. 【Features】 - There is no need for special processing (such as hole punching, slitting, or eye marks) on labels or backing sheets; you can use labels issued by standard roll labels or barcode printers as they are. - No adjustments to the machine are necessary based on label size. - Within the specifications, it can accommodate all sizes of labels with a single unit. - It does not require a power supply, so it can be used anywhere. - It can handle labels up to a maximum width of 100mm. - It is proudly made in Japan. *For more details, please download the PDF or feel free to contact us.
Set the application speed using applicators and bar coaters for coating!
The "Automatic Film Applicator" is a testing machine designed to eliminate variations in manual application by coating sheets of paper, metal, film, etc., with paints, inks, adhesives, waxes, etc., using applicators or bar coaters, while setting the coating speed. Our company also accepts custom orders for changes in stop positions, speeds, and sample table dimensions. Please feel free to contact us with your requests. 【Specifications】 ■ Glass plate dimensions: 380×250mm (Reference: Effective coating area approximately 297×210mm) ■ Sample piece fixation: Suction plate, binder ■ Coating speed: 10–120mm/sec ■ Power supply: AC100V 1Φ 3P 50/60HZ 5A ■ Main unit dimensions: Approximately 900×500×250mm ■ Weight: Approximately 50kg *For more details, please download the PDF or feel free to contact us.
