オールグッド Company Overview

The "Small Automatic Film Applicator" is a new type of coating machine (desktop automatic coater) that miniaturizes the "100 Series" and enhances functionality. The coating distance is up to A4 size. The coating speed ranges from 1 to 200 mm/s, allowing for a wide range of speed adjustments from low to high. We offer a lineup that includes the glass plate "101-1," the vacuum chuck plate "101-2," and the dual-use type for both glass plate and vacuum chuck "101-3." 【Features】 ■ Coating distance is up to A4 size ■ Wide range of speed adjustments from low to high ■ Load adjustment using weights is possible (up to 2000 gm) ■ The clamp section for holding test samples can be finely adjusted according to the thickness of the sample ■ Compatible with thin test samples like films and thick test samples like glass plates when used with a vacuum chuck plate ■ Stable coating can be performed regardless of the material of the test sample

The "100 Series" is an automatic film applicator (desktop automatic coater). It can be operated via a touch panel, and the sample size can be set freely up to "A3 size." Additionally, the coating speed can be adjusted in increments of 1 mm per second. We offer a lineup including the glass plate "100-1," the vacuum chuck plate "100-3," and the heated vacuum chuck plate "100-5." 【Features】 ■ All operations can be performed on the touch panel screen ■ Coating speed and coating distance can be freely set ■ Achieves a coating range of up to approximately A3 size ■ Contributes significantly to reducing curing time and stabilizing the coating film by adding heating during coating ■ Original settings tailored to test pieces or samples can be memorized up to a maximum of 6, allowing for immediate coating under the same conditions after powering on.

The "Coating Drying Time Measurement Device" is a product used to measure the time it takes for paint to change from a wet film to a dry film. A measuring needle is set on top of the paint applied at a constant film thickness, and the needle moves a distance of 300mm according to the set time. During this time, the paint gradually dries, causing changes in the state of the film after the needle has advanced. At the point where the state of the film changes, the time scale on the left side of the main unit is read to check the time for each stage. The point at which the needle leaves no mark indicates that the film is completely dry. 【Features】 ■ Measures the time it takes for paint to change from a wet film to a dry film ■ Can measure up to 10 lanes simultaneously ■ Allows for different time settings on 5 tracks (2 lanes per track) ■ Standard set times: 6 hours, 12 hours, 24 hours, 48 hours ■ One of the 5 tracks can be customized for time settings ■ The main unit is operated via an LCD touch panel