Brush Product List and Ranking from 170 Manufacturers, Suppliers and Companies

Abrasive brush products

You can choose the finishing roughness from #80 to #8000! It only removes surface dirt and films, without excessive grinding.

We would like to introduce our abrasive material "Brush Products." The "3M Radial Bristle Products" are special resin brushes with abrasive particles that flexibly follow the contours of recessed areas, allowing for easy polishing in places that traditional nylon brushes with abrasive particles could not reach. Please utilize them for tasks such as removing burrs after end mill processing, polishing the inner surfaces of pipes, cleaning molds, and removing discoloration from welds. 【Features】 ■ Generates less heat and clogging, maintaining stable polishing power until the end ■ Only removes surface dirt and coatings without excessive abrasion ■ Safe as there are no flying debris that can puncture the human body, unlike wire brushes ■ Keeps the work environment clean as there is no need to use compounds ■ Does not produce metal dust, leaving no rust-causing residues on metal surfaces *For more details, please refer to the PDF document or feel free to contact us.

Company：スリーエムジャパン
Price：Other

Grindstone
Brush

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Static Electricity Removal - In Clean Room] Static Electricity Removal and Dust-Proof Brush

A mechanism that can be connected to an air pump! Simultaneously performs air blowing, static elimination, and sweeping in one process.

We would like to introduce "Eleklear," which we handle. Developed as a brush that allows for smooth and easy removal of static electricity and dust prevention, which are critical in clean rooms and during pre-painting processes. We offer models such as "EL-01," which allows for airflow adjustment by opening and closing the handle cock, and "EL-02," which features a flexible arm that can be used at your preferred angle. 【Usage Purposes (Partial)】 ■ EL-01: A type designed to connect directly to the coupler of an air pump. ■ EL-02: A type designed to screw into the tip of an air gun. ■ EL-03: A brush-type designed for removing static and dust from finer grooves and corners. *For more details, please refer to the related links or feel free to contact us.

Company：ハギテック本社工場
Price：Other

Other cleaning tools
Brush

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Channel-type roll brush with shaft RJ series

For removing dust and debris from the belt conveyor, use a belt cleaner!

This is a standard type of channel-style roll brush with high-density bristles. It features nylon 0.3 and a stainless steel shaft with a keyway, making it versatile for cleaning applications.

Company：共伸技研
Price：Other

Other machine elements
Brush
others
Brush

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Flat bar with polypropylene straight brush

It is used even when water is needed while not absorbing much water!

The "Flat Bar Mounted Polypropylene Linear Brush" is a brush with a flat bar that has long holes for bolt mounting, welded onto it. Polypropylene is characterized by its strength compared to nylon, and thicker wire diameters are suitable for scraping applications. It absorbs very little water, making it useful even when some rigidity is needed while water is being applied. Additionally, as a standard product, we have predetermined the dimensions in advance. It will be convenient if you consider this during the design phase. 【Features】 ■ Stronger rigidity compared to nylon ■ Thicker wire diameters are suitable for scraping applications ■ Absorbs very little water *For more details, please refer to the related links or feel free to contact us.

Company：共伸技研
Price：Other

Brush
Brush

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Industrial internal winding brush

Custom industrial brushes manufactured and sold with short lead times and from a single unit! Please feel free to consult us even for projects that have been declined elsewhere.

We would like to introduce the "Industrial Inner Roll Brush" handled by Kyoshin Giken Co., Ltd. This is an inner roll brush with bristles facing inward, suitable for cleaning wires and thread-like materials. The ring-shaped brush can be used to fill gaps, while the coil-shaped brush is useful for removing debris from drawn wire. We also offer consultations on the selection of bristle materials, and free samples can be sent upon request. Please feel free to contact us if you have any inquiries. 【Features】 ■ Inner roll brush with bristles facing inward ■ Ring-shaped brush can be used to fill gaps ■ Coil-shaped brush can be used for removing debris from drawn wire *For more details, please download the PDF or feel free to contact us.

Company：共伸技研
Price：Other

Brush
Brush

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Industrial twisted-in-wire brushes

We also carry angled twisted-wire brushes, designed so that the tip can be bent to brush even the very end of a bore or blind hole.

"Industrial twisted-wire brushes" are constructed by twisting two or four strands of wire and securing the bristle material between them. They share the same basic structure as a baby bottle brush. Variations include "single-twist" (using two wires), "double-single twist" (using four wires for high strength), and "double-twist" (using four wires to accommodate a higher bristle density). Custom specifications are available, such as attaching a pipe to the handle section to allow for mounting onto machinery. We also offer consultation on the selection of bristle materials and can provide free samples. Please feel free to contact us for quotes or to discuss your specific requirements. 【Features】 ■ Custom specifications available ■ Consultation on bristle material selection ■ Free samples available

Company：共伸技研
Price：Other

Brush
Brush

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Industrial cup brush

It can be used for the seals of the vacuum cleaner's suction inlet and the shot blast outlet!

We would like to introduce the "Industrial Cup Brush" handled by Kyoshin Giken Co., Ltd. This product features a high-density channel design. It is possible to attach fittings through welding, and it can be manufactured in multiple layers. Additionally, we offer consultations on the selection of bristle materials, and free samples can be sent upon request. Please feel free to contact us if you have any inquiries. 【Features】 ■ High-density channel design ■ Stainless steel channel (SUS430) specifications are also available ■ Fittings can be attached through welding ■ Can be manufactured in multiple layers *For more details, please download the PDF or feel free to contact us.

Company：共伸技研
Price：Other

Brush
Brush

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Industrial roll brush

Strongly fixed to the axis of iron or SUS! It is also possible to deliver without the axis.

We would like to introduce the "Industrial Roll Brush" handled by Kyoshin Giken Co., Ltd. It features a high-density tufting method that wraps channel brushes in a spiral, allowing for control of density by adjusting the pitch of the spiral. Additionally, we also offer a type of roll brush with a protruding axis on one side, known as a dragonfly brush. 【Features】 ■ High-density tufting method that wraps channel brushes in a spiral ■ Density can be controlled by adjusting the pitch of the spiral ■ Firmly fixed to iron or SUS shafts ■ Can be delivered without a shaft ■ We also accept consultations on material selection and can provide free samples *For more details, please download the PDF or feel free to contact us.

Company：共伸技研
Price：Other

Brush
Brush

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

工業用チャンネルブラシ

毛材サンプル無料！様々な大きさ・長さ・形状に加工が可能、高密度の植毛ができる

共伸技研は、チャンネルブラシのオーダーメイド製造を1個から承ります。様々な大きさ・長さ・形状に加工が可能。高密度の植毛が可能。また、チャンネルの大きさで毛量を調整できます。用途に応じて毛材も選定いただけますので、ご相談ください。毛材サンプルを無料でお送りします。【特長】 ■特注工業用ブラシを短納期・1個ロットから製造 ■年間で400社のお客様に9000種類のブラシをお届け ※詳しくはPDFをダウンロードしていただくか、お気軽にお問い合わせください。

Company：共伸技研
Price：Other

Brush
Brush

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Industrial elevator brush

Suppresses the generation of static electricity during brushing! Also has a certain effect on static electricity removal.

Gohshin Giken manufactures and sells "industrial elevator brushes" with short delivery times and from a single unit lot. They can be processed into various sizes, lengths, and shapes. This product features bristles made of nylon with carbon attached to provide conductivity. The stiffness is comparable to nylon, but the surface has a slightly rough texture. We will send you a sample of the bristles for free, so please feel free to contact us. 【Features】 ■ Reduces static electricity generation during brushing ■ Has a certain effect on static electricity removal ■ Available only in black due to the color of the carbon ■ Melting point 257℃, maximum usage limit below 110℃ ■ Electrical resistance value 3X10^3 Ω/cm to 7X10^3 Ω/cm *For more details, please download the PDF or feel free to contact us.

Company：共伸技研
Price：Other

Brush
Brush

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Radial cup brush

Attach a straight brush to the flange! Application of cup brushes.

We would like to introduce a case study of our "channel cup brush" production. Typically, channel cup brushes are installed to form a circle that fits round fittings such as flanges. However, this product is designed with straight brushes installed to spread outward from the center of the fitting. This type of product is referred to as a channel radial cup brush. Our company manufactures and sells custom industrial brushes with short lead times and from a minimum order of one piece. 【Case Overview】 - A set of four straight brushes installed as ten sets - Provides a solid volume - The bristle material used is known as grit, which contains abrasive particles - This bristle material is often used for tasks that involve grinding or scraping *For more details, please download the PDF or feel free to contact us.

Company：共伸技研
Price：Other

Brush
Brush

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Radial brush with a different number of bristles.

The production limit of radial brushes is determined by the outer diameter of the shaft and the size of the channels!

We would like to introduce a case where we manufactured a "radial brush" that attaches a linear channel brush to a shaft. Channel roll brushes work by rotating and using the tips of the bristles, while radial brushes also rotate but work with a flapping motion. Our company manufactures and sells custom industrial brushes with short lead times, starting from a single unit. We look forward to your wonderful inquiries and consultations about brushes. 【Case Overview】 ■ Using #8 channel ■ Bristle material is Nyφ1.5 ■ Attaching a linear channel brush to the shaft ■ A minimum gap of 10mm is required between brushes for welding processing ■ Both sides of the brush are securely fixed during welding processing *For more details, please download the PDF or feel free to contact us.

Company：共伸技研
Price：Other

Brush
Brush

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Integration with hardware shape

Application of the straight brush! Adjust the length of the channel straight brush and prepare straight brushes of different lengths.

We would like to introduce a case where a channel straight brush was attached to a bracket shaped like an L at our company. We confirmed how much of the bristle material needed to extend beyond the bracket and attached it using welding to ensure that the channel part does not protrude from the bracket. This brush is often used as a component of machinery for the purpose of "sealing." Our company manufactures and sells custom industrial brushes with short lead times, starting from a single unit. 【Case Overview】 ■ Attached a channel straight brush to a bracket shaped like an L ■ Attached using welding to ensure the channel part does not protrude from the bracket ■ Adjusted the length of the channel straight brush and prepared straight brushes of different lengths ■ The bristle material used is brass with a diameter of 0.15 mm ■ This brush is attached as a component of machinery and is used for the purpose of "sealing." *For more details, please download the PDF or feel free to contact us.

Company：共伸技研
Price：Other

Brush
Brush

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Brush with flanges at both ends.

Application of channel roll brush! The bristle material is Thunderon with a wire diameter of Φ0.08.

We would like to introduce a rare product we manufactured at our company, which features FG (flanges) attached to both ends of a roll brush. By attaching fittings to both ends of the brush, it effectively suppresses the spreading of the bristles that occurs during use. Our company manufactures and sells custom industrial brushes with short lead times, starting from a single unit. Please feel free to contact us when you need assistance. 【Features】 ■ After winding the brush around the shaft, round plates are attached to both ends through welding. ■ Fittings are attached to both ends of the brush to suppress the spreading of the bristles during use. ■ The bristle material used is Thunderon. ■ The wire diameter is Φ0.08, making it very thin, which causes it to flutter when rotated. ■ This processing method is used when you want to limit the movement of the bristle material with a thin wire diameter. *For more details, please download the PDF or feel free to contact us.

Company：共伸技研
Price：Other

Brush
Brush

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Small radial brush

We are determining whether it is possible to manufacture based on the width of the brush, the outer diameter of the shaft, the number of pieces, etc.!

We would like to introduce a case of manufacturing a "channel radial brush," which falls under the category of roll brushes, at our company. The brush is mounted at a 90° position relative to the axis. For basic radial brushes, the mounting position is determined based on the angle. Our company manufactures and sells custom industrial brushes with short lead times, starting from a single unit. We look forward to your wonderful inquiries and consultations regarding brushes. 【Case Overview】 ■ Brushes are attached to the axis at 90° intervals using welding processing ■ A 24mm channel linear brush is mounted at the center of the axis ■ The bristle material used is SUSφ0.3 *For more details, please download the PDF or feel free to contact us.

Company：共伸技研
Price：Other

Brush
Brush

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Request for brush repotting

Case study on replacing straight brushes!

We would like to introduce a case where we received a request from a customer for the replacement of a channel brush that was previously manufactured. Channel roll brushes can be rewound using the existing shaft, and straight brushes can also be replaced. Depending on the product, multiple replacements may be possible. Our company manufactures and sells custom industrial brushes with short lead times and from a single unit lot. We look forward to your wonderful inquiries and consultations regarding brushes. 【Case Overview】 ■ When removing the brush, use power tools and proceed with caution. ■ Cost savings can be achieved by reusing fittings and shafts. ■ If the fittings reach their limit, please contact us before manufacturing. *For more details, please download the PDF or feel free to contact us.

Company：共伸技研
Price：Other

Brush
Brush

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ring and roll brush

Attach one ring brush to the tip of the axis and wrap a roll brush around it!

We would like to introduce a case where we manufactured a channel brush that combines two types of brushes. The advantage is that a brush can be securely attached around the tip of the shaft. It uses fluorine-based resin bristles, which are heat-resistant and chemical-resistant. Our company manufactures and sells custom industrial brushes with short lead times, starting from a single unit. We look forward to your wonderful inquiries and consultations about brushes. 【Case Overview】 ■ The tip is a ring brush ■ The entire shaft is a roll brush ■ Brush outer diameter φ30, shaft outer diameter φ14 ■ Bristle material is fluorine-based resin φ0.25 ■ Brush width is 60mm *For more details, please download the PDF or feel free to contact us.

Company：共伸技研
Price：Other

Brush
Brush

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Large inward curling ring brush

Anyway, it's huge! An introduction to the inward curling ring brush.

We would like to introduce a rare case of brush manufacturing that we rarely produce. While the inward curling ring brush itself is not that unusual, the point of interest is its size. The outer diameter is an impressive Φ1010mm, and the inner diameter is Φ940mm. Of course, like other inward curling brushes, it is also possible to make the inner diameter Φ0. Our company manufactures and sells custom industrial brushes with short lead times, starting from a single unit. We look forward to your wonderful inquiries and consultations regarding brushes. 【Case Overview】 ■ Outer diameter φ1010 ■ Inner diameter φ940 ■ #8 channel ■ Nylon bristle material φ0.3 ■ The channel ring is delivered in a detached state *For more details, please download the PDF or feel free to contact us.

Company：共伸技研
Price：Other

Brush
Brush

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Channel W Helical Brush

Perform both winding directions with one brush! Blended fibers of polyester and Koneks.

We would like to introduce a case where we manufactured the Channel W Helical Brush. The main application is to install it on conveyors, where the rotating brush collects and removes debris attached to the conveyor, either to the outside or inside. Our company manufactures and sells custom industrial brushes with short lead times, starting from a single unit. We look forward to your wonderful inquiries and consultations regarding brushes. 【Case Overview】 ■ The biggest feature is that both winding directions are performed by a single brush. ■ There is space between the brushes. ■ The bristle material used this time is a blend of polyester, classified as a chemical fiber, and Cornex bristle material. *For more details, please download the PDF or feel free to contact us.

Company：共伸技研
Price：Other

Brush
Brush

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Attach three thin channel brushes to a U-shaped bracket.

A brush characterized by its very "thin" design! It is completed through repeated work while making fine adjustments.

We would like to introduce a case where three thin channel brushes were attached to a U-shaped bracket at our company. Since the bracket is bent in a U-shape, we received a request to ensure that the brushes are installed tightly without any gaps at the corners. The brushes were cut to a certain length, and the work was completed by repeatedly making fine adjustments. Our company manufactures and sells custom industrial brushes with short lead times, starting from a single unit. [Case Overview] ■ Production is carried out while carefully checking the sizes. ■ Since the bracket is bent in a U-shape, the brushes are installed tightly without any gaps at the corners. ■ The work was completed by repeatedly making fine adjustments to the brushes cut to a certain length. *For more details, please download the PDF or feel free to contact us.

Company：共伸技研
Price：Other

Brush
Brush

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Channel inward curling ring brush

A very large size that is not frequently seen as an example! The material used is metal wire SUSΦ0.2.

We would like to introduce a case where we manufactured a channel inner winding ring brush. This case uses a fitting with an outer diameter of Φ1000mm, which is a very large size that is not frequently seen as an example. Two pieces of 6mm thick fittings are fixed by welding to sandwich a 12mm thick fitting. Our company manufactures and sells custom industrial brushes with short delivery times, starting from a single unit. 【Case Overview】 ■ Uses a fitting with an outer diameter of Φ1000mm ■ Two pieces of 6mm thick fittings are fixed by welding to sandwich a 12mm thick fitting ■ The bristle material used is SUSΦ0.2 metal wire *For more details, please download the PDF or feel free to contact us.

Company：共伸技研
Price：Other

Brush
Brush

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

#2 Channel Roll Brush

Until now, the limit has been up to L50! The material of the channel will be iron.

We would like to introduce a case where we manufactured a #2 channel roll brush. The length exceeded 50mm. The method is the same as producing it in a coil shape, but we are connecting them using adhesive every 50mm. We will continue to evolve not only with #2 but also with other sizes. Our company manufactures and sells custom industrial brushes with short lead times, starting from a single unit. 【Case Overview】 ■ Until now, the limit was 50mm ■ We are connecting them using adhesive every 50mm ■ The material of the channel is iron *For more details, please download the PDF or feel free to contact us.

Company：共伸技研
Price：Other

Brush
Brush

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Seal brush

It is shaped to match the straight parts and the bulging parts, just like the metal fittings!

We would like to introduce a case where we manufactured a seal brush that serves the role of a "wall" to eliminate gaps. Instead of using one brush, we utilized three brushes. One is a straight brush, and the other two are brushes that have been bent symmetrically to the left and right. Our company manufactures and sells custom industrial brushes with short lead times, starting from a single unit. We look forward to your wonderful inquiries and consultations regarding brushes. 【Case Overview】 ■ A channel brush attached to a slightly unusual-shaped fitting ■ Using three brushes instead of one ■ One is a straight brush, and two are brushes that have been bent symmetrically to the left and right ■ The size of the channel uses #5 ■ The bristle material is nylon with a diameter of 0.2 mm *For more details, please download the PDF or feel free to contact us.

Company：共伸技研
Price：Other

Brush
Brush

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Brush using channel #5 and channel #2.

Introducing a brush designed for use within the company! The bristles are made of nylon with a diameter of 0.15 mm.

We would like to introduce a case where brushes were manufactured using #5 and #2 channels. The #5 brush was made with a width of 40mm, and the #2 brush with a width of 30mm, both with a length of 250mm. A ring was welded in the center of both types of brushes. Our company manufactures and sells custom industrial brushes with short lead times, starting from a single unit. 【Case Overview】 ■ #5 was made with a width of 40mm, #2 with a width of 30mm ■ Both types have the same length of 250mm ■ A ring was welded in the center of both types of brushes ■ The bristle material used is nylon with a diameter of 0.15mm *For more details, please download the PDF or feel free to contact us.

Company：共伸技研
Price：Other

Brush
Brush

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cup brush made to fit the hardware.

There are features in the bracket for attaching the brush! This is the result of utilizing "free design capabilities."

We would like to introduce a case where we manufactured a cup brush tailored to a specific fitting. This time, the fitting for attaching the brush has unique features; it is tubular but has some notched processing. The bristle material used is black nylon with a diameter of 0.25 mm and a wavy texture. Our company manufactures and sells custom industrial brushes with short lead times, starting from a single unit. 【Case Overview】 ■ Channel cup brush with fitting ■ The fitting for attaching the brush has unique features ■ The bristle material used is black nylon with a diameter of 0.25 mm and a wavy texture *For more details, please download the PDF or feel free to contact us.

Company：共伸技研
Price：Other

Brush
Brush

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Reuse of axes

Focus on the axis used for the roll brush! Make the channel brush coiled and wrap it around the axis.

We would like to introduce a case where we manufactured a channel roll brush wrapped around a shaft. Brushes are essentially consumables. Over time, the bristles wear down or become frayed. In such cases, it is possible to replace the entire shaft, but for repeated use, we recommend replacing only the brush, a process known as "rewinding." Our company manufactures and sells custom industrial brushes with short lead times and from a single unit. 【Case Overview】 ■ The channel brush is coiled and wrapped around the shaft. ■ The timing for replacing the basic shaft varies depending on the customer's usage conditions. *For more details, please download the PDF or feel free to contact us.

Company：共伸技研
Price：Other

Brush
Brush

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Attach a large U-shaped handle to the channel straight brush.

The material uses chemical fiber PP (polypropylene) with a diameter of 0.3! The length of the material this time is 200mm.

We would like to introduce a case where we attached a large U-shaped handle to a channel straight brush. The channel can be made of either metal iron or SUS, and it is generally possible to attach most handles or fittings that can be welded. Our company manufactures and sells custom industrial brushes with short lead times, starting from a single unit. 【Case Overview】 ■ The channel is made of either metal iron or SUS. ■ The bristle material used is chemical fiber PP (polypropylene) with a diameter of 0.3mm. ■ The length of the bristle material in this case is 200mm. ■ The primary use is more for "sweeping" rather than "polishing." *For more details, please download the PDF or feel free to contact us.

Company：共伸技研
Price：Other

Brush
Brush

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Channel inward curl brush

Increase resistance to the maximum and remove dirt and other contaminants from the workpiece!

We would like to introduce a case of producing channel internal brushes at our company. There are manufacturing limits for the outer diameter based on the size and material of the channel, but regarding the inner diameter, it can be processed up to a maximum of (0). The bristle material used is nylon, a synthetic fiber, but production is also possible with other fiber materials. Our company manufactures and sells custom industrial brushes with short delivery times, starting from a single unit. 【Case Overview】 ■ There are manufacturing limits for the outer diameter based on the size and material of the channel ■ The inner diameter can be processed up to a maximum of (0) ■ The bristle material used is nylon, a synthetic fiber ■ Production is also possible with other fiber materials *For more details, please download the PDF or feel free to contact us.

Company：共伸技研
Price：Other

Brush
Brush

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Attach a channel straight brush to a specially shaped fitting using welding processing.

Introduction of a case where installation was performed using special fittings! Manufactured utilizing "freedom of design."

We would like to introduce a case where a channel straight brush was welded onto a specially shaped fitting at our company. No matter what special shape it has, we utilize the channel brush's greatest feature, "freedom of design," to carry out the production. Our company manufactures and sells custom industrial brushes with short lead times, starting from a single unit. 【Case Overview】 ■ Production carried out utilizing "freedom of design" ■ For iron materials, a thickness of t1.6 or more; for stainless steel, a thickness of t1.5 or more *For more details, please download the PDF or feel free to contact us.

Company：共伸技研
Price：Other

Brush
Brush

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Information] No more confusion! How to correctly choose the bristle material for industrial brushes.

The key is to choose the right type of hair material for your purpose! You can choose from four commonly used patterns.

This document provides a detailed explanation on how to correctly select the bristle materials for industrial brushes. It outlines the criteria for selecting brushes and explains the bristle materials used in industrial brushes, including metal wires, synthetic fibers, animal fibers, and plant fibers. Additionally, to help you choose from the four common patterns of industrial brush applications, we present recommended bristle materials in a flowchart format. Please feel free to download and take a look. 【Contents (partial)】 ■ Criteria for selecting brass ■ Choosing materials for industrial brushes ■ For those considering use in harsh environments (high heat, organic solvents) ■ For those considering metal wires for polishing, stripping, deburring, etc. ■ If you need to remove or eliminate static electricity *For more details, please download the PDF or feel free to contact us.

Company：共伸技研
Price：Other

Brush
Brush

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Brush Product List and Ranking from 170 Manufacturers, Suppliers and Companies | IPROS GMS

Brush Manufacturer, Suppliers and Company Rankings

Brush Product ranking