We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Chuck.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Chuck×帝国チャック - List of Manufacturers, Suppliers, Companies and Products

Chuck Product List

1～5 item / All 5 items

Displayed results
Large Design Collet Chuck MAX500

Large Design Collet Chuck MAX500

[Short delivery time, high precision] Large design collet chuck. Repetition accuracy of less than 20μ!!

Large collet with outer diameter grip achieving repeatability of less than 20μ! High-precision large design collet chuck MAX500 ■□■Features■□■ ■Daringly taking on the somewhat risky request from the user for repeatability of less than 20μ ■Completed in a short delivery time. As a result of the inspection attendance, all requested items were cleared in one go ■Large collet chuck used in vertical machines with a drawbar thrust of 19.6kN ■Chuck outer diameter: Φ520 ■Chuck total length: 357mm ■Drawbar thrust: 19.6kN ■Grip force: 686kN *The workpiece diameter in the example is Φ450. ■We can accommodate outer diameter dimensions up to MAX500mm in a short delivery time. For more details, please download the catalog or contact us.

  • Chuck
  • Contract manufacturing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Design Chuck Standard Series AC Drawer Type mm Type

Design Chuck Standard Series AC Drawer Type mm Type

No additional processing is required for installing the stopper! We also accept design production similar to the inch type.

The "Standard Series AC Drawer Type mm Type" is a design chuck that retains the functionality of the conventional inch type while adding new convenience for easier use. With the transition to millimeter standards, usability has improved. It comes standard with a seating circuit hole, and since the flange shaft end face is polished, a stopper can be attached without additional processing. Additionally, we also accept design production similar to the inch type. 【Features】 ■ Improved usability with millimeter standards ■ Comes standard with a seating circuit hole ■ Flange shaft end face is polished ■ Stopper can be attached without additional processing ■ Design production available similar to inch type *For more details, please refer to the PDF document or feel free to contact us.

  • Chuck
  • Contract manufacturing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Design Chuck "Standard Series AC Drawer Type"

Design Chuck "Standard Series AC Drawer Type"

The bending tolerance is large, and it is resistant to frequent empty operations! It is also recommended for short workpieces that require a restrictor.

The "Standard Series AC Drawer Type" is a design chuck suitable for a wide range of inner diameter grips, from a small diameter of φ12.7 to a large diameter of φ113.4. Compared to the short series, it has a larger bending tolerance and is resistant to frequent empty operations, making it recommended for short workpieces that require a restrictor (collet opening regulation). When using the arbor type, basic components such as an adapter, drawer joint, [restrictor], and stopper are necessary. However, if you provide various conditions, we can conduct technical evaluations and design production. 【Features】 ■ Drawer type specification ■ Suitable for a wide range of inner diameter grips from φ12.7 to φ113.4 ■ Larger bending tolerance compared to the short series, and strong against frequent empty operations ■ Recommended for short workpieces that require a restrictor (collet opening regulation) ■ We can respond to technical evaluations and design production if you provide various conditions *For more details, please refer to the PDF materials or feel free to contact us.

  • Chuck
  • Contract manufacturing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Design Chuck "Short Series AC Drawer Type mm Type"

Design Chuck "Short Series AC Drawer Type mm Type"

The millimeter standard has been adopted, improving usability! The stopper can be installed without any additional processing.

The "Short Series AC Drawer Type mm" is a design chuck that has become easier to use by adding new convenience while maintaining the functionality of the traditional inch type. It comes standard with a seating circuit hole, and since the flange shaft end face is polished, a stopper can be attached without additional processing. The usability has improved with the millimeter standard. Additionally, we also accept design production similar to the inch type. 【Features】 ■ Improved usability with millimeter standard ■ Standard seating circuit hole included ■ Flange shaft end face is polished ■ Stopper can be attached without additional processing ■ Design production available similar to inch type *For more details, please refer to the PDF document or feel free to contact us.

  • Chuck
  • Contract manufacturing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Design Chuck "Short Series AC Drawer Type"

Design Chuck "Short Series AC Drawer Type"

If you provide the conditions, we will conduct technical evaluations and design production! Introduction to Design Check.

The "Short Series AC Drawer Type" is a design chuck with a drawer specification. It is suitable for workpieces with a short gripping width when you want to reduce the overhang amount of an NC lathe, and it is also ideal for slightly heavy cutting processes that require a restricter, where there are concerns about torsional rigidity in the standard series. When using the arbor type, basic designs require an adapter, drawer joint, restricter, and stopper. However, if you provide various conditions, we will conduct technical evaluations and design production. 【Features】 ■ Drawer specification ■ Suitable for slightly heavy cutting processes where there are concerns about torsional rigidity in the standard series ■ We will respond to technical evaluations and design production if you provide various conditions *For more details, please refer to the PDF materials or feel free to contact us.

  • Chuck
  • Contract manufacturing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Chuck

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.