1～10 item / All 10 items
Reduce the sponge size to accommodate a wide range of spatula tip sizes.
Adoption of multi-power supply The sponge roller, kept wet, rotates and cleans the tip of the trowel. It is possible to rotate in both forward and reverse using I/O.
The roller brush rotates and scrapes off the carbon deposits attached to the tip of the iron.
- Equipped with a powerful roller brush The high-speed rotating brush scrapes off the carbon deposits stuck to the tip of the soldering iron. - Easy maintenance Thanks to the maintenance knurl, daily maintenance such as disposing of carbon waste collected in the tray and replacing the brush can be done easily. - Multi-power supply It can be used in any region.
The rotating drill bit removes the debris attached to the inside of the sleeve.
Dimensions: 77mm(W) X 144mm(D) X 54mm(H) Drill speed: Approximately 8000rpm Power supply: DC24V (30mA)
Rotary type tip cleaner
Feature 1: Wiping cleaning with a sponge Feature 2: Easy automatic water supply Feature 3: Efficient cleaning
Smoke cleaner selectable from the usage environment
It is a type that exhausts through ducts within the factory. A silicone tube is attached to the tip of the soldering iron for localized suction. Additionally, the suction is of the ejector type, so it requires no power supply and has a compact design.
Prevents blowback from air blowing.
This is a tray used to blow away solder attached to the soldering tip using an air blow. It allows for height and orientation adjustments, minimizing unnecessary movements and completing the cleaning process in the shortest time possible. Additionally, you can choose between CRB or CRB-A2 depending on the shape of the soldering tip. CRB: A type that uses the air blow pipe standardly equipped with the soldering unit. CRB-A2: A type where the air nozzle is attached to the tray.
Prevents blowback from air blowing.
This is a tray used to blow away solder attached to the soldering tip using an air blower. It allows for height and orientation adjustments, minimizing unnecessary movements and completing the cleaning process in the shortest time possible. Additionally, you can choose between CRB or CRB-A2 depending on the shape of the soldering tip. CRB: A type that uses the air blow pipe standardly equipped with the soldering unit. CRB-A2: A type where the air nozzle is attached to the tray.
Smoke cleaner selectable from usage environment
If there is no duct near the soldering environment, using the VAC-3000 in conjunction with the VAC-1000 will clean the solder smoke with three filters and an activated carbon filter before discharging it into the room.
Smoke cleaner selectable from usage environment
It features a three-layer filter structure with a capture efficiency of 99.97%. It uses a low-noise, low-vibration, low-power consumption DC brushless motor, and with its high-power motor, the suction power is also powerful.
Smoke cleaner selectable from the usage environment
It is a type that exhausts through ducts within the factory. A silicone tube is attached to the tip of the soldering iron for localized suction. Additionally, the suction is of the ejector type, so it requires no power supply and has a compact design.
