Last Updated： Aggregation Period:Oct 15, 2025～Nov 11, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 15, 2025～Nov 11, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 15, 2025～Nov 11, 2025
This ranking is based on the number of page views on our site.
1～15 item / All 67 items
A precision densitometer with intrinsically safe explosion-proof specifications that can be processed with corrosion-resistant materials in the liquid contact area.
A process precision densitometer with intrinsic safety explosion-proof specifications, capable of being processed with corrosion-resistant materials for the liquid connection part. Equipped with a two-wire technology amplifier. Machined with JIS 10K flange.
The density (concentration) of the fluid inside the pipe is measured from the outside of the pipe. No processing of the pipe is required.
Our gamma-ray density meter PH-1000Ex measures completely non-contact by simply being clamped onto existing piping without any modifications. In contrast, conventional density (concentration) meters require the sensor to come into contact with the fluid, which can lead to sensor failure under acidic, alkaline, high-temperature, or high-pressure conditions. Additionally, in cases of slurries, the sensor may become stuck, gradually leading to measurement errors and ultimately rendering it unusable. The sensor of the PH-1000Ex does not come into contact with the fluid, and there is no pressure applied within the piping. Furthermore, by implementing appropriate insulation between the piping and the sensor, temperature influences are eliminated. Therefore, it can measure fluids under acidic, alkaline, high-temperature, high-pressure conditions, and slurries without any issues. If you are experiencing troubles with other methods, please consider the PH-1000Ex. It uses weak gamma rays, which are not subject to regulations and are safe. 【Features】 - No need for the appointment of a supervisor or the establishment of controlled areas (certified as a display-equipped certified device) - Lightweight and easy to install on existing piping - Can be installed in a small space *For more details, please download the PDF or feel free to contact us.
The density (concentration) of the fluid inside the pipe is measured from the outside of the pipe. No processing of the pipe is required.
Our gamma-ray density meter PH-2000Ex measures completely non-contact by simply being inserted into existing piping without any modifications. In contrast, conventional density meters require the sensor to be in contact with the fluid, which can lead to sensor failure under acidic, alkaline, high-temperature, or high-pressure conditions. Additionally, in cases of slurries, the sensor can become stuck, gradually leading to measurement errors and ultimately rendering it unusable. The sensor of the PH-2000Ex does not come into contact with the fluid, and there is no pressure applied within the piping. Furthermore, by providing appropriate insulation between the piping and the sensor, temperature influences are eliminated. Therefore, it can measure fluids under acidic, alkaline, high-temperature, high-pressure conditions, and slurries without any issues. If you are experiencing troubles with other methods, please consider the PH-2000Ex. Although it uses weak gamma rays, there is no need for appointing a supervisor or setting up controlled areas. 【Features】 - No need for appointing a supervisor or setting up controlled areas (certification for display-equipped certified devices has been obtained) - Lightweight and easy to install in existing piping - Can be installed in a small space *For more details, please download the PDF or feel free to contact us.
Automatic zero point correction and weight calibration! After measuring weight and density in the solvent, the sample is discharged.
The "H&D 3000" is a device that automatically measures the Shore hardness and density of rubber composite materials. It automates the previously separate measurements of Shore hardness and material density, achieving labor savings. It is also equipped with an automatic loading tray for automatic measurements. Measurement heads for Shore hardness A, D, or IRHD (as an option) are available. (Multiple heads can be mounted.) 【Features】 ■ Two operation modes are selectable: repeat and magazine exchange. ■ Test results can be evaluated and visually confirmed using MonDevice software. ■ Automatic exchange of sample magazines can also be set as an option. ■ Filling and draining of the measurement chamber is performed by a built-in pump. ■ Sorting of good and defective items into separate containers can also be set as an option. *For more details, please refer to the PDF materials or feel free to contact us.
Density, concentration, and thickness measurements are taken using weak radiation. No documents such as notifications or permits are required!
The density (concentration) of solutions and slurries flowing inside pipes can be measured online without contact. The pipe materials can be steel pipes, plastic pipes, or any other material. It is applicable for measuring the density (concentration) of pipes ranging from 20A to 1000A.
Due to the weak radiation source, no legal procedures are required. Although it is a radiation device, it has safety and ease of use comparable to general measuring instruments.
The radiation source used is below the lower limit quantity (regulatory target lower value), and since the radiation source is weak, no legal procedures are required. The density (concentration) of the solution or slurry flowing through the piping can be measured online without contact. The leakage radiation dose on the surface of the equipment is below 2.6 μSv/h, ensuring high safety, and due to the weak leakage radiation, the establishment of a controlled area is unnecessary. The density of the fluid can be measured without the influence of flow rate, viscosity, or particle size distribution. For more details, please download the catalog or contact us.
Due to the weak radiation source, this gamma density meter requires no legal procedures at all. The leakage radiation is also weak, so there is no need to establish a controlled area.
High reliability as an industrial measurement device! Three years of free warranty. Ideal for applications where measurement is difficult with other methods. Applicable for measuring the density (concentration) of piping from 20A to 1000A. Non-contact measurement of the density (concentration) of solutions and slurries flowing inside the piping can be done online. The piping materials can be steel pipes, plastic pipes, etc., regardless of the material. Fluid density can be measured without the influence of flow rate, viscosity, or particle size distribution. For more details, please download the catalog or contact us.
Using silver and nickel alloy for the contact materials! A gas density meter with an integrated indicator section and contact mechanism section.
The "Model 100GD" is a gas density gauge that includes a display section indicating the pressure of the insulating gas used for power, and a contact mechanism that activates an alarm or control relay when abnormal pressure occurs and the gas pressure reaches the set value, either closing or opening the circuit. It can accommodate coloring of the scale section according to customer specifications. Even if the gas pressure changes due to variations in ambient temperature, the instrument is equipped with a bimetallic rod for temperature compensation, allowing it to indicate the equivalent pressure value at 20°C. 【Features】 ■ Contact materials are made of silver and nickel alloy. ■ It can accommodate coloring of the scale section according to customer specifications (for a fee). ■ Even if the gas pressure changes due to variations in ambient temperature, the instrument is equipped with a bimetallic rod for temperature compensation, allowing it to indicate the equivalent pressure value at 20°C. *For more details, please refer to the PDF document or feel free to contact us.
Compact and lightweight! A field density meter that measures without radiation and uses electromagnetic waves!
The "PAB-1-2" is an asphalt density gauge that utilizes the correlation between the density and dielectric constant of asphalt. Electromagnetic waves pass through the asphalt from the sensor plate of the main unit. During this process, the dielectric constant is measured, and the density of the asphalt is automatically calculated. It is safe to use without radiation, and no qualifications or licenses are required. Please use it for quality control of paving materials and compaction management. 【Features】 ■ Easy operation with a touch panel ■ Measurement using electromagnetic waves ■ Capable of measuring the density of asphalt pavement with a thickness of 10 to 100 mm ■ Achieves long battery life! * Can be used for 45 hours at 30% backlight (charging time: approximately 5 hours) ■ Non-destructive and can obtain accurate measurements in just a few seconds * For more details, please feel free to contact us.
【NETIS registered product】The density of asphalt can be measured non-destructively.
It is equipped with three mode switching functions, allowing you to perform necessary inspections immediately. Data recording is also possible. NETIS: KTK-160019-VE (as of August 2023) *For more details, please refer to the catalog available for download below under "PDF Download." You can also request a quote from "Contact Us." Feel free to do so.
Measurement time is 1 minute per location! R.I. type moisture density meter allows for quick measurement of multiple points.
Our company handles the R.I. type moisture density gauge "ANDES SRDM-2SV," which can be used for "soil compaction management" in various earthworks such as roadways, airports, dams, site development, levees, and backfilling of pipelines. This product is a non-destructive measuring instrument that utilizes sealed radioisotopes (radiation isotopes: RI), making it easy to carry to the necessary location whenever needed, allowing for simple, accurate, reliable, speedy, and safe measurement of required data. 【Features】 ■ On-site assessment of the compaction state of embankments ■ Capable of measuring any soil type ■ Equipped with printing and statistical calculation functions for measurement data ■ Capable of storing measurement data in the main unit (300 points) ■ Minimal human error factors in measurements *For more details, please download the PDF or feel free to contact us.
