Last Updated： Aggregation Period:Jul 23, 2025～Aug 19, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 23, 2025～Aug 19, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 23, 2025～Aug 19, 2025
This ranking is based on the number of page views on our site.
31～45 item / All 128 items
Receives BCD signals input from a synchronous digital converter or other measuring instruments, and branches them into two isolated circuits with voltage-free a contact signals for output.
It supports a standard 4-digit BCD signal (with parity for each digit and BUSY/READY). Optionally, a 5-digit BCD signal can also be selected. There are 2-output and 4-output types available.
Easily distribute antenna signals to two devices! This is an antenna splitter compatible with new 4K/8K satellite broadcasts.
We handle "Antenna Splitters (Die-Cast)" at our company. The "HAT-2SP911NB" can be used as a standalone splitter, allowing you to connect commercially available or your own cables. Additionally, the "HAT-2SP340WH" comes with two detachable screw-type/straight cables. It can be securely connected to devices, eliminating concerns about accidental disconnection. 【Features】 ■ Efficiently distributes one signal from the antenna to two devices ■ Compatible with new 4K/8K satellite broadcasts ■ Noise-resistant zinc die-cast case ■ All terminals can supply power to BS antennas *For more details, please refer to the PDF document or feel free to contact us.
HDMI 4K IP extender and splitter. Combines radial connection and daisy chain connection to extend and distribute remote PCs. EDID settings available.
【Overview】 ◎ HDMI over IP one-to-many extender distributor (When using CAT6 cable: one hop 140m, CAT5e cable: same 120m) ◎ Radial connection using L2 Gigabit switch, and monitor extension with daisy chain receiver (HELR-4K) ◎ 3840x2160@30, HDCP compliant ◎ Supports 7.1 channel LPCM (192KHz) ◎ EDID capture function ◎ Daisy chain receiver (HELR-4K) supports up to 250 monitors, with a maximum distance of 2.5km 【Note】 The maximum data rate is 850Mbps, so use a Gigabit Ethernet L2 switch (jumbo frame support is not required)
HDMI 4K USB2.0 over IP extender and distributor. Extends and distributes remote PCs using CAT6, MMF, and SMF.
【Overview】 ◎ HDMI and USB over IP extender and distributor USB HID (keyboard, mouse), USB 2.0 devices (storage, printer, barcode reader, etc.) are supported. ◎ Audio input/output, bidirectional RS232, and unidirectional IR support. ◎ With CAT6 cable, one-hop distance of 125m, and can be further extended using a gigabit Ethernet switch (jumbo frame support not required). ◎ Fiber optic use is possible (standard is 1LC MMF for 2km or 1LC SMF for 20km. Can be changed to 2LC, 1SC, etc. by replacing the SFP module). ◎ Supports 3840x2160@30, HDCP compliant. ◎ EDID capture is possible. ◎ Compatible with 9DU (DVI model) and transmitter/receiver.
VGA, keyboard, mouse extension distributor. One-hop 200m with CAT6 cable. Further extension possible with a gigabit Ethernet switch.
**Overview** ◎ VGA/KVM over IP Extender and Splitter USB HID (keyboard, mouse) compatible * USB 2.0 devices (storage, printer, barcode reader, etc.) not supported ◎ Supports 1920x1080@60, audio input/output ◎ When using CAT6 cable, one-hop distance of 200m; further extension possible with gigabit Ethernet switch (jumbo frame support not required) Note: In a one-to-many configuration, keyboard and mouse connections are allowed only on one receiver. Other receivers cannot connect to the device and can only receive video and audio.
![[Processing Example] RB Signal Distributor](https://image.mono.ipros.com/public/product/image/f14/2000538336/IPROS26346657664932578556.png?w=280&h=280)
Replacing it with a new fuse will restore it! There is also a switch to stop the buzzer.
We would like to introduce our processing case "RB Signal Distributor." When an overcurrent flows, the fuse blows to protect the circuit, the lamp at the blown location goes out, and a buzzer sounds simultaneously. When a new fuse is inserted, it resets, and there is also a switch to stop the buzzer. Our company handles everything from design to sheet metal work and assembly wiring, delivering the finished product to our customers. Please feel free to consult us when you need assistance. *We also accept requests for reference estimates and processing consultations.* 【Case Overview】 ■ Product Name: RB Signal Distributor ■ Size: 482×300×88 ■ Material: SPCC 1.6t & 2.0t ■ Finish: Painting (25-60A), TEPRA *For more details, please refer to the PDF document or feel free to contact us.*
Introduction of a signal distributor that can connect up to 4 devices per PC, certified with medical standard 60601!
Our medical standard-compliant "signal distributor" has a maximum resolution of 1920×1200 and can connect up to 4 devices to a single PC. It has obtained the medical standard IEC 60601 and can display up to WUXGA. This product is custom-developed. We can propose specifications tailored to your requirements, including various interfaces and shapes. 【Features】 ■ Complies with the medical standard IEC 60601-1 ■ Capable of displaying up to WUXGA *For more details, please refer to the PDF document or feel free to contact us.
The input section is equipped with an equalizer function! It distributes the input signal from the distributor directly to the output.
This product is a 4-way splitter compatible with input signals of DVB-ASI, HD-SDI, and SD-SDI. It has two built-in passive 2-way splitters and two active 4-way splitters. Equipped with a contact output terminal for status confirmation, it allows for remote monitoring of the status, and features two AC power input lines (redundant power configuration). 【Features】 <Active Type> ■ Distributes the input signal of the splitter directly to the output ■ Equipped with an equalizer function at the input section ■ By incorporating a reclocking function, it shapes and outputs degraded input signals *For more details, please refer to the PDF document or feel free to contact us.
Distributing GNSS received signals to multiple (8-port) GNSS receivers! It is possible to omit the inline amplifier!
The "FT-GNSDA-8" from Flextime Corporation is a receiving signal splitter used to supply the received signal from a single receiving antenna to multiple receiving devices. The frequency range covers 1.2 to 1.8 GHz, making it capable of receiving multi-frequency signals. The antenna supply voltage can be selected between on/off and +3.3V and +5V using a slide switch on the rear panel, expanding the selection range for antennas. 【Features】 ■ Supplies the received signal from a single receiving antenna to multiple receiving devices ■ Covers a frequency range of 1.2 to 1.8 GHz ■ Capable of receiving multi-frequency signals ■ Built-in amplifier ■ Inline amplifier can be omitted *For more details, please refer to the PDF document or feel free to contact us.
