We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Dryer.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Dryer×流機エンジニアリング - List of Manufacturers, Suppliers, Companies and Products

Dryer Product List

1～7 item / All 7 items

Displayed results
Turn waste liquid into something valuable! Dehydration and drying device.

Turn waste liquid into something valuable! Dehydration and drying device.

★Why not turn the waste liquid you are currently disposing of into something valuable?★ Accepting tests for 10 kg of solid material from 1000 L of slurry liquid in 1 hour.

The "Pleated Filter Dewatering" device allows for the suction filtration of high-concentration slurry (mud-like mixture), forming a cake layer on the filter surface. This formed cake layer is then dewatered and dried, allowing it to be collected as sludge (aggregated solid). Our unique pleated filter enables dewatering and drying in a compact device with a short cycle time. No coagulants or filtration aids are required. The moisture content of the sludge can be as low as 1% for inorganic materials. 【Features】 ■ Individual liquid separation to dewatering and drying in 60 minutes (all-in-one) ■ Compatible with ultra-high concentration turbid water ■ Processing capacity of 400 kg/day (based on processing 1,000 L of 20,000 PPM turbid water) ■ Maintenance requires only filter replacement ◎ For more details, please refer to the PDF document or feel free to contact us.

  • Wastewater/wastewater treatment equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Water Treatment Case] Four processes (solid-liquid separation, concentration, dewatering, drying) in one machine!

[Water Treatment Case] Four processes (solid-liquid separation, concentration, dewatering, drying) in one machine!

We will introduce an example of consolidating into a single machine, achieving a reduction in installation costs and running costs!

We would like to introduce a case study from Ryuki Engineering, which proposes a reduction in the running costs of water treatment. We received a request from a metal processing factory to efficiently recover rare metals from high-concentration rare metal-containing water (valuable material) without lowering the concentration. [Case Study] ■Industry: Metal Processing Factory ■Challenges - Previously, recovery involved four processes (solid-liquid separation, concentration, dewatering, drying), which incurred significant time and costs. - There was a desire to efficiently recover only rare metals from high-concentration rare metal-containing water (valuable material) without lowering the concentration. Our company has consolidated the process into a single machine for de-drying. This one unit handles all roles, significantly reducing installation costs, installation space, and running costs (electricity and maintenance expenses). *For more details, please refer to the PDF document or feel free to contact us.

  • Water treatment equipment
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Water Treatment Case] Removal of Impurities from Cooling Water in Heat Exchangers

[Water Treatment Case] Removal of Impurities from Cooling Water in Heat Exchangers

90% OFF on water utility fees! Here are examples of reducing maintenance frequency and lowering disposal costs.

We would like to introduce a case study from Ryuki Engineering, which proposes a reduction in the running costs of water treatment. We received a request from a resin factory to reduce maintenance costs caused by impurities entering the heat exchanger from the cooling water used during cutting. 【Case Study】 ■Industry: Resin Factory ■Challenges - The large amount of cooling water used to cool the water during cutting contains impurities (resin scraps) that are entering the heat exchanger. - Maintenance costs for the heat exchanger are high, and we want to reduce them. We proposed dehydration to remove impurities from the cooling water. By using the cleaned cooling water in the heat exchanger, we reduced the maintenance frequency from four times a year to once a year. Additionally, we not only removed impurities but also reduced their volume to lower disposal costs. *For more details, please refer to the PDF document or feel free to contact us.

  • Water treatment equipment
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flat Membrane Dehydration Drying Device "Flat Dakkan"

Flat Membrane Dehydration Drying Device "Flat Dakkan"

"Dakkan" is now available in a tabletop size! A flat membrane dewatering and drying device suitable for verification before the introduction of Dakkan.

The "Flat Dakkann" is a tabletop-sized flat membrane dehydration and drying device derived from Dakkann, designed for small quantities and diverse research and development applications. Its compact size allows for research and development as well as various sample tests without the need for a dedicated space, thereby improving efficiency. It enables high-performance dehydration and drying easily, allowing for in-house research and development of small quantities and diverse products, which helps reduce costs. 【Features】 ■ Tabletop size ■ Easy high-performance dehydration and drying ■ Cost reduction for small quantities and diverse products in-house ■ Increased efficiency due to no space restrictions *For more details, please refer to the PDF document or feel free to contact us.

  • Other metal materials
  • Testing Equipment and Devices
  • Wastewater/wastewater treatment equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Slurry liquid up to 1% by mass! "Dehydration and drying device" for waste liquid and discharge liquid.

Slurry liquid up to 1% by mass! "Dehydration and drying device" for waste liquid and discharge liquid.

[Case Presentation] Significantly reduced waste liquid disposal costs. Completed from solid-liquid separation to drying in about 60 minutes. Processing test OK.

The "Pleated Dryer Dehydration" device sucks in and filters high-concentration slurry to form a cake layer on the filter surface. This cake layer is then dehydrated and dried, allowing it to be collected as sludge. It employs patented filter technology to achieve powerful processing capabilities. The compact design integrates a dewatering machine and a dryer, minimizing the installation area. No coagulants or filtration aids are required, contributing to reduced running costs. The moisture content of the sludge has been recorded at around 1% for inorganic materials. 【Features】 ■ Processing capacity of 400 kg/day (when processing 1000L of wastewater at 20,000 ppm) ■ Solid-liquid separation to dehydration and drying completed in about 60 minutes ■ Capable of handling ultra-high concentration slurry ■ Maintenance requires only filter replacement *You can view a case study that includes information about this product from the "Download" section. We also offer sample testing. Please feel free to contact us.

  • Wastewater/wastewater treatment equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Patent-acquired technology adopted: Slurry dewatering dryer 'Dakan' for advanced powder materials.

Patent-acquired technology adopted: Slurry dewatering dryer 'Dakan' for advanced powder materials.

It can perform solid-liquid separation, dewatering, and drying all in one unit, allowing for low-cost operation! Suitable for particle recovery and liquid circulation reuse, etc.

"Dakukan" is an advanced dewatering and drying device for powder materials that can perform solid-liquid separation, dewatering, and drying all in one unit. 【Features of Dakukan】 - Capable of solid-liquid separation, dewatering, and drying in one unit - New technology that supports both powder and liquid recovery - Closed system design to minimize powder exposure - Suitable for small quantities and a variety of products - Compatible with high-concentration slurry - Generally does not require coagulants or filtration aids - Can be installed in narrow spaces - Few moving parts in the main unit, reducing maintenance costs 【Main Challenges for Users】 - Want to recover particles contained in aqueous solutions - Want to remove foreign substances and recycle liquid - Want to perform particle flushing after filtration - Need to perform filtration and drying in one unit due to limited installation space - Do not want to include concentration devices like MF membranes before the filtration unit - Existing devices have high initial costs - Not suitable for small quantities and a variety of products, and maintenance is difficult

  • s1.jpg
  • Drying Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Gift of Case Studies! Drying and volume reduction of moisture-containing residues.

Gift of Case Studies! Drying and volume reduction of moisture-containing residues.

We will introduce examples of reducing industrial waste costs and converting residual materials into feed to contribute to the creation of valuable resources.

We would like to introduce a case study from Ryuki Engineering, which proposes a reduction in the running costs of water treatment. We received a request from a food processing factory to dry and reduce the weight of their residual materials in order to cut disposal costs. 【Case Study】 ■Industry: Food Processing Factory ■Challenges - When disposing of residual materials (press cake), the disposal fee is determined by weight, leading to high costs for disposing of moisture-laden residuals. - They wanted to dry and reduce the weight of the residual materials to cut disposal costs. To further enhance the efficiency of processing the juice generated during the drying process, we proposed a combination of dewatering and ECO Clean. This not only reduced industrial waste costs but also contributed to converting the dried residuals into animal feed, generating valuable by-products. *For more details, please refer to the PDF document or feel free to contact us.

  • 1.png
  • Water treatment equipment
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Dryer

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.