Feeding device Product List and Ranking from 280 Manufacturers, Suppliers and Companies

A must-see for those struggling with power supply issues!

[No commercial AC100V required] Fully independent, capable of supplying power even during disasters or power outages. Useful for installing surveillance cameras outdoors!

【Solar Independent Power Supply】 A standalone power supply has been created that does not require commercial AC 100V, consisting of a power box (with a built-in lead-acid battery) and a solar panel. During the day (when sunlight is available), the power generated by the solar panel is supplied to the devices, and any surplus power is charged into the built-in battery. At night (when there is no sunlight), the power stored in the battery is supplied to the devices. Therefore, it is effective as a power source for installing surveillance cameras and LED lighting in areas where securing power is difficult, such as riverbanks, mountainous regions, and vast parks! If you are struggling with power supply issues, please consider this product. Even during periods with little sunlight, such as the rainy season, it can provide power for over 120 hours (5 days) when fully charged with two batteries and a load of 5W. 《Features》 ◇ Power supply is possible during disasters and power outages ◇ Completely independent, no electricity costs ◇ Clean energy utilizing solar power with minimal environmental impact ◇ Usable for various applications such as cameras and LEDs

Company：東京電源
Price：100,000 yen-500,000 yen

power supply
power supply
others
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Even in places where securing commercial power is difficult - "Solar Independent Power Supply Unit"

It excels in places where securing power outdoors is difficult! Peace of mind to use electricity even during disasters and power outages!

The "Solar Independent Power Supply Unit" serves as a new power source in locations where securing outdoor electricity is difficult. During the day (when there is sunlight), it generates electricity using solar panels, and at night (when there is no sunlight), it supplies power from the electricity stored in batteries to devices. It can be used for a variety of applications, but it is particularly recommended for powering devices with low power consumption, such as surveillance cameras, LED lighting, and communication equipment like Wi-Fi! **Features** - Ideal for cases where wiring is difficult in vast areas like parks or mountainous regions - Can supply power even during power outages - Offers a combined proposal for the power supply unit and solar panels - Simple installation due to its independent power supply type - Can be used for a variety of applications depending on your ideas ★ For more details, please download the catalog and specifications, or contact us.

Company：東京電源
Price：100,000 yen-500,000 yen

power supply
Solar power generator
Other environmental equipment
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Exhibition Information] "Solar Summit 2022 ONLINE"

Tokyo Electric Power will exhibit at the DMM Online Exhibition "Solar Summit 2022 ONLINE." [Event period: March 30 (Wed) to April 1 (Fri)]

On our exhibition page, we will introduce the "Solar Independent Power Supply System." 【Solar Independent Power Supply System】 This system serves as a new power source in environments where securing electricity outdoors is challenging. It supplies power generated by solar panels to loads, while excess power charges the built-in battery. When solar panels cannot generate power (such as at night), electricity is supplied from the built-in battery. This independent power system enables self-sufficient power generation, making it possible to install surveillance cameras and communication devices even in environments where securing power is difficult. 《Features》 ◆ Utilizes clean energy generated solely from sunlight ◆ Fully independent, allowing power supply even during outages ◆ Suitable for cases where wiring is difficult in vast areas like parks and mountainous regions ◆ Can be utilized for a variety of applications depending on ideas

Company：東京電源
Price：Other

power supply
Solar power generator
Other environmental equipment
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tape payoff for jacket extrusion line

It was developed with the aim of achieving continuous tape supply without interruption during the vertical taping operation of the extrusion process.

The TPX model 30-2 can be equipped with two tape pads above and below the main tape pad, and when the remaining part of the main tape pad reaches a pre-set outer diameter, the splicing operation to the spare tape pad is automatically performed.

Company：ケー・ブラッシュ商会本社
Price：Other

Other processing machines
Sealing machine
Feeding device

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Material Supply Machine "Z Feed ZKF-30"

Detects the supply amount of materials and automatically adjusts operation and stopping! The transport speed can be set to two speeds: low and high.

The "Z Feed ZKF-30" is a material-drawing type feeder. The transport rollers located above and below are driven simultaneously, providing strong conveying power. When used together with a cutting machine, it achieves more stable cutting length accuracy. Additionally, the acceleration and deceleration times of the rollers can be individually set, allowing for prevention of overshooting due to inertia and enabling the transport of heavy and difficult-to-draw materials. 【Features】 ■ The transport rollers above and below are driven simultaneously, providing strong conveying power. ■ The acceleration and deceleration times of the rollers can be adjusted. ■ The transport speed can be set to two speeds: low and high. ■ Operating between low and high speeds prevents sudden loads on the material. ■ The direction of feeding can be selected easily using just the touch panel. *For more details, please refer to the PDF document or feel free to contact us.

Company：造研
Price：Other

others
Powder Supply Device
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Material Supply Machine "Z Feed ZKF-25"

Introducing a material supply machine with a convenient jog function for setting materials! It's a material drawer type.

The "Z Feed ZKF-25" is a high-performance feeding device that maximizes the cutting length accuracy of cutting machines. It can handle workpieces up to a maximum height of 45mm and a width of 100mm. The feeding speed can be set using speed control to match the material shape and the cutting speed of the digital cutter, and the roller spacing can be adjusted to minimize material deformation. Additionally, we also offer the vertical feeding type "ZKF-51 (main unit) / ZFR-51 (dedicated flange)." 【Features】 ■ Capable of handling workpieces up to a maximum height of 45mm and a width of 100mm ■ Detection methods can be selected according to the material ■ Convenient jog function for setting materials ■ Adjustable feeding speed and roller spacing *For more details, please refer to the PDF document or feel free to contact us.

Company：造研
Price：Other

others
Powder Supply Device
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

New model release of fully automatic integrated free cooling chiller/chilled tower.

Developed a new type of connection. Compatible with 1.8MW. Please inquire about the specifications and energy-saving estimates of the new model. Definitely for data center cooling.

Prioritize free cooling for the production of chilled water in the medium temperature range, and if it is insufficiently cooled, chillers will back up the cooling. It is utilized for data centers, cooling in production processes, and water recycling, and is also appreciated for its space-saving and labor-saving aspects. Please make use of it for energy and water savings during the installation, expansion, or renewal of chillers, turbo refrigeration units, and absorption chillers. We offer highly energy-efficient evaporative systems, easy-to-maintain air-cooled systems, and a new model. The photos and catalog included are of the current models. On August 1, 2024, the piping equipment division of Protearial Co., Ltd. started anew as Kuwana Metal Industry Co., Ltd. under the capital of Okaya Steel Co., Ltd. Please inquire about the specifications of the new model.

Company：桑名金属工業
Price：Other

Cooling system
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Electromagnetic Sample Feeder DR100

Electromagnetic sample supply device for uniform and continuous sample supply.

The electromagnetic sample feeder DR100 enables uniform and continuous sample supply. With a beautiful design that harmonizes with other equipment, it can be attached not only to the grinders and classifiers from Verder Scientific (Lübeck) but also to electronic balances, mixers, stirrers, and particle size analyzers from other manufacturers. 【Features】 - Uniform supply - Significant labor savings - Continuously adjustable supply amount - Timer duration and flow level are digitally displayed - Compact design with an intuitive user interface - Easy one-touch setup of the funnel and chute without tools - Simple maintenance - Prevents overload when attached to a grinder - Interfaces with equipment from other manufacturers are also possible - Hopper capacity of 2.8L or 3.5L - Ideal for supplying small sample quantities at the experimental or testing level ■ For more details, please refer to 'Sample Request' or 'Download' ■

Company：ヴァーダー・サイエンティフィック株式会社
Price：Other

Analytical Equipment and Devices
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-precision Continuous Supply Device [Dust Disperser α]

【Available Powders】 ■ Wood powder, Polymer, Stone pine nut ■ Carbon, White alumina ■ Silica, Crystalline lactose ■ JIS Z8901 test powders: 8 types, 10 types, 16 types

Company：アルファ
Price：Other

Other FA equipment
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Resin Parts Automatic Supply Device "Orbit Feeder"

Set the required quantity of parts on the touch panel for automatic supply! Effective in improving work efficiency and quality.

The "Orbit Feeder" is an automatic parts supply device that automatically supplies the specified quantity of small resin parts, which vary in number depending on the production vehicle, to workers on various production lines in automobile factories. It supplies a set number of parts to a tray as configured on a touch panel, and when the worker removes all the parts and the tray is empty, it resumes supply. This leads to a reduction in counting time for parts and helps prevent mistakes due to incorrect quantities, thereby improving work efficiency and quality on the production line. 【Features】 - Integrated mechanism and control unit for compactness and cost reduction - Customizable to accommodate various parts - Designed for easy access to parts from the tray even while wearing gloves - Supply quantity of parts can be selected from up to 7 patterns - Simply connect the power and turn on the switch to start - The desired quantity of parts can be directly input from the touch panel *For more details, please refer to the PDF document or feel free to contact us.

Company：日本マイクロシステム
Price：Other

Other machine elements
Other machine tools
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Old mesh stable supply device

The best option for quickly and stably processing large amounts of powder.

● In the online stable supply device, by deliberately performing classification with a certain amount of powder accumulated on the mesh, the weight of the powder adds force to pass through the mesh, allowing for faster processing of more raw materials than relying solely on vibration. ● By utilizing the angle of repose of the powder, simply adjusting the distance between the sieve mesh and the supply pipe can maintain a constant amount of powder accumulated on the sieve mesh. ● If the balance is disrupted due to clogging or other issues, a sensor embedded in the supply pipe automatically stops the supply when it detects a certain amount. Furthermore, with timer control, if no detection occurs after a set time, it will restart; if detection occurs, it will stop completely as an abnormality, enabling stable operation.

Company：ダルトン
Price：Other

Sieve
Sieve/Shaker
Grain size sorting machine (sieving)
Feeding device

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Demo Unit Available] Micro Powder Supply Device KDB Series

Must-see for those who have challenges such as not being able to allocate personnel for powder supply or wanting to perform small-scale powder supply with simple operations!

The KDB series micro powder supply device provides continuous powder supply at a stable speed. The powder feeder has become even more compact! By controlling it with a computer, it can also be linked with weighing instruments! 【Price】 - From ¥378,000 (including tax) This device is ideal for laboratory applications, allowing for constant speed supply, precise supply, and even micro powder supply with simple operation! *We also accept tests and rentals, so please give it a try! If you provide the actual product along with detailed data on materials, particle size, specific gravity, etc., we can provide measurement data for a small quantity at ¥3,000 per sample. 【Examples of Use】 Battery materials (electrode materials) Paint raw materials (pigments, paint powders) Metal powders (powder metallurgy, fillers) Pharmaceuticals (powdered medicines) Cosmetics (foundation) Food (ingredients, additives) and more... ● For more details, please download and view the PDF.

Company：魁半導体
Price：Other

Powder Supply Device
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Handset "Baseline" Diwartokin

For operating the Dewart Oking electric actuator, a handheld 2-button switch to 6-button switch (wired) is available, allowing control of up to 2 motors.

This is a handheld 2-button to 6-button switch for operating Dewart Oking's electric actuators (up to 2 motors can be operated). It features a streamlined handset. It is suitable for operating electric actuators in home "reclining chairs and sofas," "massage chairs," "healthcare beds," "home beds," and "home welfare equipment," etc. 【Specification Information】 ■ Handheld type ■ 2 buttons to 6 buttons (up to 2 motors can be operated) ■ Wired (5-pin plug) ■ Compatible with control boxes with or without relays *For more details and specifications, please contact us directly.

Company：静岡金属工業
Price：Less than 10,000 yen

DC Motor
Feeding device

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Power supply device "JLDP.10.012" Diwart Okin

Power supply unit for Dewart Oking electric actuators, input voltage AC100-240V, compatible with power plugs from various countries.

Power supply unit for D-Wartokin electric actuators Input voltage: AC100-240V 50/60Hz Output voltage: DC 29V 3A Compatible power plugs for various countries (Japan, China, Taiwan, USA, Australia, Eurozone, UK) Suitable for operating electric actuators in home "reclining chairs and sofas," "massage chairs," "healthcare beds," "home beds," "home welfare equipment," etc. 【Specification Information】 ■ Input voltage: AC100-240V 50/60Hz ■ Output voltage: DC 29V 3A ■ Compatible power plugs for various countries (Japan, China, Taiwan, USA, Australia, Eurozone, UK) *For more details and specifications, please contact us directly.

Company：静岡金属工業
Price：Less than 10,000 yen

DC Motor
Feeding device

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Power supply device "JLDP.10.013" Diwartokin

Power supply unit for Dewart Oking electric actuators, input voltage AC100-240V, compatible with power plugs from various countries.

Power supply unit for Diwartokin's electric actuator Input voltage: AC100-240V Output voltage: DC 29V 1.8A Compatible with power plugs from various countries (Japan, China, USA, Australia, Eurozone, UK) Suitable for operating electric actuators in home "reclining chairs and sofas," "massage chairs," "healthcare beds," "home beds," "home welfare equipment," etc. 【Specification Information】 ■ Input voltage: AC100-240V ■ Output voltage: DC 29V 1.8A ■ Compatible with power plugs from various countries (Japan, China, USA, Australia, Eurozone, UK) ■ Option: Mounting brackets that can be installed inside chairs, etc. *For more details and specifications, please contact us directly.

Company：静岡金属工業
Price：Less than 10,000 yen

DC Motor
Feeding device

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Liquid Nitrogen Automatic Supply System GL Series (Automatic Replenishment, Unmanned Continuous Operation)

Released from manual refueling of LN2. Automatic refueling and unmanned continuous operation.

An automatic liquid nitrogen supply device that detects the liquid level of liquid nitrogen and automatically replenishes it to the set level. It supports unmanned continuous operation during nights and holidays, eliminating the hassle of manual replenishment and the risk of spills in applications such as cooling traps, low-temperature experiments, and sample freezing preservation. Customization to fit the supply container or Dewar is also possible.

Company：MSAファクトリー
Price：Other

Refrigerators and freezers
Other physicochemical equipment
Feeding device

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Screw Rolling Attachment (Manufactured by WAGNER)

Screw rolling attachment

It is optimal for screw rolling processing from the axial direction. The screw rolling attachment is used mounted on a tool holder. Screw rolling processing can be performed on various types of machines such as single-axis automatic lathes, multi-axis automatic lathes, and NC lathes. The attachment performs screw rolling processing by pressing two synchronized rolling rolls against the workpiece through constant feeding from the cross direction. It can maximize the utilization of pitch, diameter, and shape. There are eight types of screw rolling attachments, which are tools capable of processing screws with larger diameters. Using Wagner's patented tools, such as types B14, B16, and B19, yields the best results. Especially for very small screws, it is necessary to perform rolling on the axis as weakly as possible. Wagner's tools can roll with a minimum step of 0.02mm.

Company：ゴーショー
Price：Other

Other machine tools
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Packaging System "Sheet Supply Device"

Introducing an FA system that takes out cardboard sheets one by one and supplies them to the line!

The "Sheet Supply Device" is a machine that takes cardboard sheets stacked on a pallet one by one and supplies them to the line. Most everyday products, such as bottles, home appliances, and building materials, are packaged in some form, and our company manufactures various box packing and packaging systems that pack or wrap these products using advanced handling technology. Please feel free to consult us when you need assistance. *For more details, please refer to the PDF materials or feel free to contact us.

Company：シブヤ精機西日本営業部
Price：Other

Other machine elements
Other industrial robots
Other conveying machines
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【High wind speed of 13㎥/s!】Clean air supply device

Achieve a clean and pure air environment at a low cost!

A clean air supply device that blows out pure air and creates a clean environment.

Company：コトヒラ工業
Price：Other

Other clean room equipment and facilities
Feeding device

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Japan Antenna Manufacturing Thunderproof Uninterruptible Power Supply [NMPST1001]

Thorough lightning protection! A highly reliable, outdoor-compatible uninterruptible power supply that protects TV communal equipment even during power outages.

●NMPST1001 (NMPST-1001) is an uninterruptible power supply (lightning-resistant type) manufactured by Nippon Antenna. ●It is an uninterruptible power supply designed to provide power to TV relay facility equipment. ●The output capacity is 100VA. ●Normally, it supplies power to the load via an insulated transformer from the commercial power supply AC100V while simultaneously charging the storage battery. ●In the event of a power outage, the inverter automatically starts, converting the DC power from the storage battery into AC power to continue supplying the load. ●It consists of a transformer, inverter, charger, and storage battery. The storage battery is a small sealed lead-acid battery. ●It has a stainless steel drip-proof case. ●It has high lightning resistance. It is composed of a lightning-resistant transformer with insulation withstand voltage and surge voltage attenuation performance, and a highly reliable protective device that prevents lightning surges, making it ideal for use in areas with frequent lightning. ●When the storage battery voltage drops below the specified level, the over-discharge prevention circuit activates. ●The operating status can be checked from the outside. ●Please choose a steel pipe pole with a diameter of φ140 to 350mm for installation. *For more details, please feel free to contact us.*

Company：エクセリ
Price：Other

UPS/Uninterruptible Power Supply
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Power Supply Unit AD-152 compatible with IP700 series

Power supply unit that continuously supplies power to the IP700 series.

● The AD-152 is a power supply unit made by Icom. ● The manufacturer's model number is AD-152#13. ● It can supply power to Icom's hybrid IP transceivers IP700 PLUS, IP700, IP700S, IP700SV, IP700SU, IP700SV BT, and IP700SU BT from a household AC 100V source. ● It is an AC adapter that provides constant power supply, making it ideal for use in situations where the device is in standby mode for receiving. ● Please note that it cannot be used for charging. ● Please be aware that the power supply adapter and AC adapter cannot be removed. *For more details, please feel free to contact us.*

Company：エクセリ
Price：Other

Other network tools
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Omori Machinery Industry "Compact Robot-Type Supply Device CCR"

Eliminating labor shortages! Introducing the "just right" compact robot supply device [CCR].

Are you struggling with labor shortages or space-saving issues in your production area? Here are three benefits of the "just right compact robot supply device 'CCR'" that can solve those challenges! 1. High cost-effectiveness achieved with minimal investment Purchase price: Despite its high performance, it is priced for easy implementation. Processing capacity: It improves production efficiency with a high processing capacity that is unimaginable for its compact size. 2. Space-saving design that can be installed anywhere Machine size: With a thoroughly compact design, it can be integrated into existing lines and installed in spaces with limited room. 3. Solving production site challenges with three features The features of "CCR" are designed to thoroughly meet the needs of your site. 【Compact package】 Incorporating numerous functions while achieving space-saving. It balances multifunctionality and ease of installation. 【Reliable food specifications】 Adopting clean specifications and food-compatible designs that are crucial in the food industry. It minimizes the risk of foreign matter contamination. 【Smooth high-performance operation】 Achieving fast and smooth pick-and-place operations of products through packaging machine interlocking control and conveyor tracking control.

Company：因幡電機産業産機カンパニー
Price：Other

Food Packaging Machinery
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Stacking Stick Feeder for Electronic Components Supply for Implementation Machines and Robots

To alleviate labor shortages and reduce working hours! Numerous achievements from major companies *Patent obtained.

Our stacked stick feeder has been certified as a "Kawasaki Manufacturing Brand for 2019" and contributes to alleviating labor shortages and reducing costs for many users! Our stacked stick feeder is a magazine stick feeder with a width of 48mm and a slim design. Electronic components in the magazine stick come out one by one in the same direction, enabling speedy and error-free assembly. It helps improve productivity, reduce labor costs, and minimize mistakes. 【Features】 ■ Can be used as a robot-mounted device or a dedicated device ■ Automatic completion method (does not require control signals) ■ Stable supply with a combination of inclination and vibration ■ Equipped with an auto-changer (empty stick discharge mechanism), etc. *For more details, please download the PDF or feel free to contact us.

Company：エナデック本社
Price：Other

Other electronic parts
Other industrial robots
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Screw Automatic Feeder "BSF-1450"

Continuous adjustment is possible from M1.0 to M5.0. One machine can accommodate various screws!

Rail width stepless adjustment Stepless adjustment is possible from M1.0 to M5.0. There is no need to purchase new rails even if the screw diameter changes due to line modifications. Adjustments alone can accommodate line changes. 【Features】 ● Unique transport method Ensures reliable transport with a rotating drum and horizontal vibrating rail. There is no clogging of the rail due to debris. ● Wide compatibility with screws Can transport short screws and screws with thin heads. Compatible with head thicknesses from 0.2 mm. ● Three adjustment functions VIBRATOR (adjustable rail vibration time.) ROLLER (adjustable drum rotation and brush rotation time.) SWING (adjustable strength of rail vibration.)

Company：キリウスジャパン
Price：10,000 yen-100,000 yen

Parts feeder
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Various screw feeding machine "BSF-1450" available with one unit! *Demo unit available for loan!

【*Demo unit available for loan】Handles various screws with one unit! Special screws such as hex socket and TP screws can be custom-ordered! NejiDas "BSF-1450"

The NejiDas series "BSF-1450" is designed for the transport of short screws and screws with thin heads, allowing for stepless adjustment from M1.4 to M5.0. When the type of screw used is changed, the rail width can also be adjusted steplessly, eliminating the need for additional rail purchases. The horizontal transport is achieved through a rotating drum and a horizontal straight rail, which prevents clogging from debris. With two adjustable features for vibration intensity and vibration & drum rotation time, this product offers control functions designed for various types of screws. 【Features】 ■ Compatible with screws from M1.4 to M5.0 ■ Stepless adjustment of rail width, eliminating the need for additional rail purchases ■ Unique transport method that prevents clogging from debris ■ Various adjustment functions enable control for different types of screws 【Screw Supply Machine BSF-1450 Demo Unit Available for Rent!】 *Customers wishing to request a demo unit should include "Request for Demo Unit" in their inquiry. *The rental period is limited to within two weeks.

Company：キリウスジャパン
Price：Other

Parts feeder
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Screw Supply Machine "NejiDas BSF-1450"

Stable supply method! Capable of transporting short screws and screws with thin heads (0.2mm or more).

The "NejiDas BSF-1450" is a screw feeding machine that allows for stepless adjustment from M1.4 to M5.0. It reliably supplies screws using a rotating drum and a horizontal vibrating rail, preventing clogging of the rail due to debris. Additionally, we offer automatic machine compatible models such as the "KFA-2060 (compatible with M3 to M6 with a neck length of 29mm)" and the "KFA-0850 (M2.0 to M5)" in our lineup. 【Features】 <BSF-1450> ■ Freely adjustable from M1.4 to M5.0 ■ Reliable transport with a rotating drum and horizontal vibrating rail ■ Prevents rail clogging due to debris ■ Adjustable vibration strength ■ Adjustable vibration and drum rotation time *For more details, please refer to the PDF document or feel free to contact us.