Feeding device Product List and Ranking from 275 Manufacturers, Suppliers and Companies

Environmentally friendly combustible cushioning material 'Eco Mother(R)' Case studies available

[Sample Presentation] Suitable as an alternative to Styrofoam! Numerous achievements in packaging for electronic devices and food preservation.

"Eco Mother (R)" is a pollution-free cushioning material made from natural ingredients with low environmental impact, specifically using corn starch as the main raw material. It features four selectable functions: filling, laying, wrapping, and packaging, making it effective across a wide range of fields and applications, from industrial packaging to commercial packaging. Additionally, if biodegradable resin is used as a binder, it can be decomposed in the soil. 【Features】 ■ Low calorific value during combustion (about half that of polystyrene) ■ Does not emit harmful gases or dioxins ■ Can be disposed of as general waste ■ Does not cause static electricity during packaging ■ Has infinite applications as a substitute for chemical products like polystyrene *For more details, please download the PDF or feel free to contact us.

Company：ティエスピー
Price：Other

Cushioning material

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Corner folding packaging machine product supply device

Would you like to introduce machinery suitable for your company? It is possible to operate at 60 rotations even if the specifications change.

The "Corner Folding Packaging Machine Product Supply Device" is a supply device that automatically feeds castella and roll cakes into the corner folding packaging machine. Previously, this task was performed by three people, but after introducing the machine, it has been streamlined to allow one person to operate it with a reduction of two personnel. Additionally, depending on the product and shape, the specifications may vary, but it can also operate at 60 cycles. 【Features】 ■ Target Sizes (mm) - W70×H65×T30 for castella - W90×H75×T25 for rolls ■ Product Size (Installation Dimensions mm): W900×L2500×H1200 ■ Takt Time: 55 pieces/min ■ Utility: Voltage 100V–200V *For more details, please refer to the PDF document or feel free to contact us.

Company：Robots Tech
Price：Other

Food Conveyor Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Deep-drawing product sterilization tray supply device

Would you like to automate the exit of the deep-drawing packaging machine? Check with a color sensor and supply the specified number of sheets.

The "Deep Drawing Product Sterilization Tray Supply Device" is a system that automatically supplies fried tofu coming from a deep drawing packaging machine onto trays. It is not important to arrange them, but the quantity per batch is crucial, so it checks 12 pieces in one shot with a color sensor and supplies the specified number. Additionally, the trays are automatically supplied just by setting them up, allowing for other tasks to be performed in the meantime. 【Features】 ■ Target size (mm): Designed according to capacity ■ Product size (installation dimensions mm): Designed according to capacity ■ Tact time: 120 pieces or more per minute ■ Utility: Voltage 100V to 200V *For more details, please refer to the PDF document or feel free to contact us.

Company：Robots Tech
Price：Other

Food Conveyor Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Iwamoto Industrial Co., Ltd.

Achieving high quality, low cost, and short delivery times through integrated production from processing to assembly!

Iwamoto Industrial Co., Ltd. specializes in units for construction machinery, measuring instruments, machine tools, robots, and semiconductor peripheral devices. The company has developed, produced, and sold its own device called the "Coolant Server Raku-Rant," which generates and automatically supplies cutting fluid at a specified concentration. By consistently managing the entire production process—from in-house jig manufacturing and material procurement to processing, assembly, painting, and performance testing—the company achieves high quality, low cost, and short delivery times.

Company：石川県産業創出支援機構
Price：Other

others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

You can buy used powder machinery that can be used from today at about one-third of the new price!

1,000 units of refurbished machinery! They are ready for use immediately after purchase. High-value buyback with free pickup and transportation costs!

We have achieved a stock of over 1,000 ready-to-use refurbished machines and a high-value purchase system! As a specialist in powder machinery, we ensure complete maintenance and deliver machines in a condition ready for immediate operation. We showcase and sell refurbished powder machinery at a top-class scale in Japan! If there are machines not in stock, we can assist you in procuring them upon request. ■□■□■□■□■□■□■□■□■□■□■□ 【Five Assurances Unique to a Powder Machinery Specialist】 1. Refurbished 2. Ready for immediate use 3. 3-month machine warranty 4. Maintenance record available 5. Comprehensive after-sales service ■□■□■□■□■□■□■□■□■□■□■□ *Please request the inventory list or download the PDF data to view it. *Some products may be excluded, so please contact us for more details.

Company：東洋ハイテック
Price：Other

Powder Supply Device
Powder Conveyor Device
Used goods purchase

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Active in outdoor installation of 'security cameras' and 'surveillance cameras'!

It enables the installation of "security cameras" and "surveillance cameras" even in places where securing power is difficult.

The "Solar Independent Power Supply" serves as a new power source in locations where securing electricity is difficult, such as outdoors. During the day (when there is sunlight), it supplies power generated by solar panels to devices, and any surplus electricity is charged into the built-in battery. At night (when there is no sunlight), it supplies power stored in the battery to devices. It is recommended for powering relatively low-consumption devices such as surveillance cameras, LTE routers, and LED lighting! It is often adopted for outdoor camera installations, such as simple river monitoring cameras (for the Ministry of Land, Infrastructure, Transport and Tourism and local governments), and you can choose from several patterns for battery quantity and output voltage, allowing for versatile applications. It is also recommended for those considering "security" and "monitoring" in mountainous areas with frequent illegal dumping or riverbanks that are hard to monitor! **Features** - Suitable for cases where securing power is difficult in vast areas like parks and riverbanks - Can supply power even during power outages - Offers a combined proposal of the power supply unit and solar panels - Independent power type, so no electricity costs are required - Can be used for various applications depending on your ideas For more details, please download the catalog or specifications, or contact us.

Company：東京電源
Price：100,000 yen-500,000 yen

power supply
Solar power generator
Other environmental equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Clean Energy!

Clean energy that does not emit carbon dioxide, which is said to be a cause of global warming!

Tokyo Power's "Solar Independent Power Supply Unit" serves as a new power source in environments where the power grid is not established. During the day (when sunlight is available), it supplies power generated by solar panels, and at night (when there is no sunlight), it provides power stored in batteries to devices. Additionally, even during consecutive days of bad weather (without sunlight), it can still supply power to devices from the stored battery power. [The available power supply time during no sunlight varies depending on the installation location and the power consumption of the devices used, so we will propose the optimal system after discussing your needs.] It can be used for a variety of applications, but it is particularly recommended for powering devices with relatively low power consumption, such as surveillance cameras, LED lighting, and communication devices like Wi-Fi! As it does not emit carbon dioxide, which is considered a cause of global warming, it is expected to see increasing utilization in the future as a "clean energy!" ★ For more details, please download the catalog and specifications or contact us.

Company：東京電源
Price：100,000 yen-500,000 yen

power supply
Solar power generator
Other environmental equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0340 Exhaust gas treatment, quicklime supply system

Installed in the quicklime supply system for exhaust gas treatment! Since the installation, there have been no troubles at all.

This is an introduction to a case where a blow disk was installed in a quicklime supply system associated with exhaust gas treatment at a production plant. The quicklime began to bridge in the equipment hopper, and we received inquiries from the operators responsible for maintenance and other tasks. Quicklime has been widely adopted in many fields, and in this case, after reviewing the hopper diagrams and the user's situation, we provided information on what we believed to be the most suitable method, including costs. Since the installation of the blow disk, there have been no further issues. [Hopper Overview] ■ Size: 1000×1000 ■ Outlet: 100A ■ Discharge Mechanism: Rotary Valve *For more details, please refer to the PDF document or feel free to contact us. *Our website features numerous implementation examples, which can be accessed through the link below.

Company：ミナギ
Price：Other

Other powder equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Permanent sterilization, odorless cutting fluid (coolant) automatic supply device.

For the parts processing industry, this is the ultimate dream product, a solution that addresses all the various troubles associated with the long-standing inconveniences of handling cutting fluids.

The era of needing to purchase cutting oils is over. With just a minimal power consumption of 300W, a few consumables, and tap water, we have a device that automatically generates cutting fluid in-house, which offers "far lower costs" and "higher cutting performance" than the cutting oils currently being purchased. The supply to each machine's cutting fluid tank is completely automated, requiring no manual labor from operators. Moreover, the groundbreaking feature of this device is its ability to automatically adjust the concentration management to maintain the cutting fluid's performance at levels equivalent to fresh fluid. [Patent pending] This cutting fluid is a "hybrid cutting fluid" that far surpasses the performance of commercially available water-soluble cutting fluids and also possesses the performance of oil-based cutting oils by adding a small amount of additive oil. It permanently eliminates "decay and odor" caused by bacteria in water-soluble cutting fluids, and the mist of cutting fluid that drifts in the factory transforms into a mist that disinfects bacteria, resulting in the entire factory becoming "odorless and healthy air." By maintaining the "hybrid cutting fluid" with automatic correction to keep it fresh, there are no issues such as tool breakage, rust formation, or decreased cutting speed due to fluid degradation, allowing it to operate continuously in a state equivalent to new fluid. Therefore, the need for "fluid replacement" is completely eliminated, and there is no longer any need for the disposal of industrial waste.

Company：U.ENG 習志野台
Price：1 million yen-5 million yen

Other machine tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cost Reduction for Machine Tool Processing - Hybrid Cutting Fluid Automatic Supply Device

The HCS-100 hybrid cutting fluid automatic replenishment system will enable the Japanese parts processing industry to achieve costs that are on par with those of emerging countries.

Introducing the powerful equipment, the HCS-100 Hybrid Cutting Fluid Automatic Replenishment System, which supports Japan's parts processing industry, renowned for its processing precision worldwide. This hybrid cutting fluid combines the properties of water-soluble cutting fluids and oil-based cutting oils, eliminating most of their drawbacks and showcasing only their advantages, allowing users to automatically generate this dream-like cutting fluid themselves. The conventional cutting fluid, consisting of 10% cutting oil and 90% water, is replaced by a 100% cutting fluid that offers superior performance. With over 50% annual cost reduction, there is no permanent spoilage or odor generation, extended tool life, reduced processing time, no foam generation, no rust formation, no need for additional fluid, and no replenishment work required from operators. Average tank capacity: 300L, dilution ratio: 20 times, number of tanks: 20. The cost difference between conventional equipment and the HCS-100 model results in a reduction of 5.5 million yen annually, totaling 16.6 million yen over three years. All manual replenishment work, new fluid, and additional fluid costs are unnecessary. We also assist companies with the application process for subsidies of 1/2 and 2/3. For more detailed information, please contact U.ENG. We look forward to the continued development of Japan's parts processing industry through cost reductions with this cutting fluid.

Company：U.ENG 習志野台
Price：1 million yen-5 million yen

Other processing machines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Production Factory Improvement Hybrid Cutting Fluid Automatic Supply System

For the parts processing industry, this is the ultimate dream product that addresses all the various troubles caused by the long-standing inconvenience of handling cutting fluids.

The era of needing to purchase cutting oils is over. With just a minimal power consumption of 300 watts, a few consumables, and tap water, we have a device that automatically generates cutting fluid with "far lower costs and higher cutting performance" than the cutting oils currently being purchased. The supply to each machine's cutting fluid tank is fully automated, requiring no manual labor from operators. Moreover, the groundbreaking feature of this device is its ability to automatically adjust the concentration management to maintain the cutting fluid at performance levels equivalent to fresh fluid. [Patent pending] This cutting fluid is a "hybrid cutting fluid" that far surpasses the performance of commercially available water-soluble cutting fluids and also possesses the performance characteristics of oil-based cutting oils by adding a small amount of additive oil. It permanently eliminates "decay and odor" caused by bacteria in water-soluble cutting fluids, and the mist of cutting fluid that drifts in the factory is transformed into a mist that disinfects bacteria, resulting in the entire factory being transformed into an "odorless, healthy air" environment. By maintaining the "hybrid cutting fluid" with automatic correction to keep it fresh, there are no issues such as tool breakage, rust formation, or decreased cutting speed due to fluid degradation, allowing operations to continue in a completely fresh fluid state. Therefore, the need for "fluid replacement" is completely eliminated, and there is no longer any need for the disposal of industrial waste.

Company：U.ENG 習志野台
Price：1 million yen-5 million yen

Other machine tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Manufacturing Subsidy: Hybrid Cutting Fluid Automatic Supply Device

We can assist you with the subsidy application for this product, which is the ultimate dream product for the parts processing industry and solves the long-standing issue of cutting fluid costs. Would you consider it?

The era of needing to purchase cutting oils is over. With just a minimal power consumption of 300W, a few consumables, and tap water, our device automatically generates cutting fluid that is "far lower in cost and has higher cutting performance" than the cutting oils currently being purchased. The supply to each machine's cutting fluid tank is "completely automatic," eliminating the need for any manual work by operators. Moreover, the groundbreaking feature of this device is its ability to automatically adjust the concentration management to "maintain the performance of the cutting fluid at levels equivalent to fresh fluid." [Patent pending] This cutting fluid is a "hybrid cutting fluid" that far exceeds the performance of commercially available water-soluble cutting fluids and also possesses the properties of oil-based cutting oils by adding a small amount of additive oil. It permanently eliminates "decay and odor" caused by bacteria and microorganisms in water-soluble cutting fluids, and the mist of cutting fluid that drifts in the factory is transformed into a mist that disinfects bacteria and microorganisms, turning the entire factory into an "odorless, healthy air" environment. By maintaining the "hybrid cutting fluid" with automatic correction to keep it fresh, there are no issues such as tool breakage, rust formation, or decreased cutting speed due to the degradation of the cutting fluid, allowing it to operate continuously in a state equivalent to fresh fluid. Therefore, the need for "refilling cutting fluid has completely disappeared, and the disposal of industrial waste has also been eliminated."

Company：U.ENG 習志野台
Price：1 million yen-5 million yen

Other machine tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Automatic particleization of coolant liquid【Automatic coolant liquid dilution supply device】

The coolant liquid that was previously diluted manually is now processed in this device, which atomizes it in the stirring section, ensuring a consistently stable particle size and concentration.

- The device automatically stirs the contents, so it does not dirty the surrounding area, and there is no need for cleaning the floor. - Each liquid is automatically measured, allowing for stable concentration management. - The dilution concentration is measured based on volume conversion. - Automatic measurement by the device helps reduce labor costs. - It has a built-in stirrer, which generates a finely dispersed diluted liquid. - The finely dispersed coolant dilution liquid with stable concentration improves machining accuracy. - Coolant liquid can be supplied automatically. - Tank capacity and supply methods can be customized. We can contribute to your company's "factory automation."

Company：中部クリーン名古屋営業所
Price：1 million yen-5 million yen

Other FA equipment
Other environmental equipment
Other water treatment equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Coolant liquid 'automatically replenished' [Automatic coolant liquid dilution supply device]

The coolant liquid that was previously supplied by the person in charge will now be automatically replenished by this device through liquid level control, eliminating the need for managing the height of the coolant liquid level.

- The necessary coolant liquid is automatically replenished by controlling the liquid level you want to manage. - Since it is sent out by the pressure of a pump built into the device, transportation is unnecessary. - The coolant liquid is automatically generated, mixed, and stirred, so there is no mess in the surrounding area, and no cleaning of the floor is required. - Each liquid is automatically measured, allowing for stable concentration management. - The dilution concentration is measured by volume conversion. - This device is fully automatic, which helps reduce labor costs. - It has a built-in stirrer, resulting in a finely dispersed diluted liquid. - The processing accuracy improves with the finely dispersed coolant dilution liquid at a stable concentration. - Coolant liquid can be supplied automatically. - Tank capacity and supply methods can be customized. In other words, it contributes to the "automation of factories."

Company：中部クリーン名古屋営業所
Price：1 million yen-5 million yen

Other FA equipment
Other environmental equipment
Other water treatment equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Coolant liquid replenishment is freed from【Automatic coolant liquid dilution supply device】.

The coolant liquid that has been generated and supplied by the person in charge until now. This device is fully automated from the preparation to the supply of the diluted solution. It can contribute to cost reduction and automation.

- When the coolant liquid level falls below the specified level, coolant liquid diluted to the designated concentration is automatically supplied through piping. - Since it does not involve manual intervention, a stable dilution rate of coolant liquid is generated. - It is transported and supplied through equipment and piping, so it does not contaminate the surrounding area. - This device is fully automatic, which helps reduce labor costs. - Personnel can focus on operational tasks, contributing to improved production efficiency. - The processing accuracy is enhanced with a coolant dilution liquid that is finely atomized at a stable concentration. - Tank capacity and supply methods can be customized. In other words, it contributes to the "automation of factories."

Company：中部クリーン名古屋営業所
Price：1 million yen-5 million yen

Other FA equipment
Other environmental equipment
Other water treatment equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Feeding device Product List and Ranking from 275 Manufacturers, Suppliers and Companies

Feeding device Manufacturer, Suppliers and Company Rankings

Feeding device Product ranking