We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Forming Machine.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Forming Machine Product List and Ranking from 328 Manufacturers, Suppliers and Companies | IPROS GMS

Last Updated： Aggregation Period:Jun 10, 2026～Jul 07, 2026
This ranking is based on the number of page views on our site.

Forming Machine Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Jun 10, 2026～Jul 07, 2026
This ranking is based on the number of page views on our site.

  1. null/null
  2. システムクリエイト Osaka//Industrial Machinery
  3. Matsumoto kakou Co.,Ltd. Shizuoka//Manufacturing and processing contract
  4. 4 日精樹脂工業 Nagano//Industrial Machinery
  5. 5 菱屋精工 Osaka//Industrial Machinery
Go to Company Ranking

Forming Machine Product ranking

Last Updated： Aggregation Period:Jun 10, 2026～Jul 07, 2026
This ranking is based on the number of page views on our site.

  1. We will exhibit at the Monozukuri World Tokyo. "Waterproof sealing technology for electrical components." Matsumoto kakou Co.,Ltd.
  2. The launch of the dedicated take-out machine for the vertical 3t small injection molding machine 'AE-M3V' has begun!
  3. Tabletop Small Injection Molding Machine 'Moiron M2-I' システムクリエイト
  4. 4 Small Injection Molding Machine "AE Series" Achievements in Metal Powder Injection Molding (MIM)
  5. 5 Injection Molding Machine "FNX-III Series" 日精樹脂工業

Forming Machine Product List

1～30 item / All 895 items

Displayed results
Injection Molding Machine "FNX-III Series"

Injection Molding Machine "FNX-III Series"

A series that combines the advantages of both electric molding machines and hydraulic molding machines.

The "FNX-III Series" is an injection molding machine equipped with the innovative hybrid pump system "X Pump." Our unique "X Pump," which combines a hydraulic pump and an electric servo motor, allows the servo motor to operate at the necessary rotational speed when needed, resulting in minimal energy loss and achieving highly efficient drive. While maintaining ease of use, it significantly reduces energy consumption. 【Features】 ■ Equipped with our unique X Pump ■ Energy efficiency and injection startup response equivalent to electric systems ■ Reduced running costs ■ Improved moldability and molding quality *For more details, please refer to the catalog or feel free to contact us.

  • Injection Molding Machine
  • Forming Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Injection Molding Machine "FVX-III Series"

Injection Molding Machine "FVX-III Series"

Revolutionizing the conventional wisdom of hydraulic molding machines.

The "FVX-III Series" is a large molding machine that maintains the user-friendliness of hydraulic molding machines and the excellent advantages of direct pressure clamping while achieving significant energy savings. It is equipped with an innovative hybrid pump system called "X Pump," featuring high rigidity direct pressure clamping, excellent injection performance, long lifespan, easy maintenance, and a balance comparable to electric models as its main characteristics. [Features] - Equipped with our proprietary X Pump - Long lifespan - Easy maintenance - Balance comparable to electric models *For more details, please refer to the catalog or feel free to contact us.

  • Injection Molding Machine
  • Forming Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Injection Molding Machine "TH-EIII Series"

Injection Molding Machine "TH-EIII Series"

Ideal for thin meat high-cycle hoop forming.

The "TH-EIII Series" is an electric vertical molding machine developed by leveraging the extensive know-how accumulated from previous shipping records of vertical molding machines. It is a single-action type that is optimal for continuous hoop molding, and by combining it with an automatic molding system, it can establish a high-value-added production line. By merging the excellent features of electric molding machines, such as energy efficiency and cleanliness, with the rich track record cultivated by hydraulic vertical molding machines, we offer an electric vertical molding machine that is ideal for insert molding. 【Features】 ■ Developed by utilizing the extensive track record and know-how gained from hydraulic vertical molding machines ■ Smooth and stable machine operation unique to electric machines ■ Excellent positioning accuracy when combined with automatic insert devices *For more details, please refer to the catalog or feel free to contact us.

  • Injection Molding Machine
  • Forming Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Injection Molding Machine "STX Series"

Injection Molding Machine "STX Series"

Compact and energy-efficient vertical machine with maneuverability.

The "STX Series" is a highly regarded series of compact and agile small vertical machines for insert molding. With the incorporation of the "X Pump," energy-saving functionality has been significantly enhanced. Additionally, it allows for approaches from four directions to the mold, making it an automation-compatible machine with excellent expandability. It demonstrates its power in molding automotive and electronic components that require high precision. 【Features】 ■ Compact and space-saving design ■ Equipped with X Pump ■ Achieves excellent injection performance and significant energy savings *For more details, please refer to the catalog or feel free to contact us.

  • Injection Molding Machine
  • Forming Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Injection Molding Machine "LSR Dedicated Machine"

Injection Molding Machine "LSR Dedicated Machine"

High-quality and productivity-enhancing dedicated injection molding machine for liquid silicone rubber.

The "LSR Dedicated Machine" is an injection molding machine specifically designed for liquid silicone rubber (LSR). It achieves high quality and improved productivity through a high-precision two-component metering device and an enhanced mixing screw. The material supply system is equipped with various supply devices that accommodate containers ranging from cartridge types to 200-liter drums. 【Features】 ■ Achieves high quality and improved productivity ■ Supply devices compatible with various containers are available *For more details, please refer to the catalog or feel free to contact us.

  • Injection Molding Machine
  • Forming Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
マグネット無しで使用できる貼り箱『SLIP-IN BOX』

マグネット無しで使用できる貼り箱『SLIP-IN BOX』

マグネットなしで機能美を追求した貼り箱　高級品の化粧箱などに！コストダウンや納期短縮も実現　FSC(R)認証取得済み

『SLIP-IN BOX』は、ふたの三角の先端を本体底のわずかな隙間に 滑り込ませる（SLIP-IN）ことで、ふたを閉める構造を実現している貼り箱です。 マグネットを使うことなく、全て紙だけでふたの構造と機能を満たしており、 量産可能な当社独自技術のオリジナル製品です。 【特長】 ■コストダウンと納期短縮 ■美しい箱を追求した形状 ■シンプルでスマートな外観 ■「ふた」が隙間にジャストフィット ■Vカットでの量産にも対応 ※詳しくはPDF資料をご覧いただくか、お気軽にお問い合わせ下さい。

  • Packaging Bags
  • Forming Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
The unique tactile sensation when held! Box with a laminate finish.

The unique tactile sensation when held! Box with a laminate finish.

[Optional Processing] Provides a unique tactile sensation when holding the box!

We would like to introduce our "Laminates." We apply films made of PP (polypropylene) or PET (polyethylene) to printed materials, finishing them with a glossy or matte (non-glossy) appearance. In addition to providing surface protection, it offers a unique tactile sensation when handling wrapped boxes, cosmetic boxes, paper boxes, and gift boxes. 【Features】 ■ Application of PP (polypropylene) or PET (polyethylene) films to printed materials ■ Finishing with a glossy or matte (non-glossy) appearance ■ Surface protection effect ■ Provides a unique tactile sensation when handling wrapped boxes, cosmetic boxes, paper boxes, and gift boxes *You can view our main product catalog by downloading the PDF below.

  • Packaging Bags
  • Forming Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
What is Dialight's "Light Pipe (Optical Pipe)"?

What is Dialight's "Light Pipe (Optical Pipe)"?

A rich lineup with a long model cycle.

Dialight's "φ2mm/3mm Side-Emitting Surface Mount LED" can deliver light to the panel even when the LED is positioned inside the circuit board, thanks to the use of light pipes (optical pipes). The design, developed through Dialight's optical research, allows for the transmission of clearer light. It features a rich lineup and a long model cycle. For more details, please download the catalog.

  • Other electronic parts
  • Forming Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Role and Benefits of LED Light Pipes【Dialight】

Role and Benefits of LED Light Pipes【Dialight】

Easy to install on PCB or panel! Custom inquiries regarding height, length, etc. are welcome.

We would like to introduce the "Optopipe Light Pipe" from Dialight, which we handle. To ensure high performance and durability, it is manufactured solely from new high-quality polycarbonate without the use of recycled materials. Additionally, it is used for visual status indication, enabling safe and reliable operation of electrical equipment, instruments, and electronic devices, and is also useful for diagnostic purposes. 【Features】 ■ Design flexibility ■ Cost reduction ■ Performance *You can download the English version of the catalog. For more details, please feel free to contact us.

  • e-22-02.PNG
  • e-22-03.PNG
  • e-22-04.PNG
  • e-22-05.PNG
  • LED lighting
  • LED Module
  • Other optical parts
  • Forming Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
515 Series 3mm Lens Reverse Mount LED Light Pipe

515 Series 3mm Lens Reverse Mount LED Light Pipe

New product! The length of the light pipe can be selected from 0.100 inches (2.5 mm) to 1 inch (25.4 mm).

Dialight's 515 series Optopipe lineup has introduced a new "3mm lens reverse mount LED light pipe." Even in situations where mounting from the front of the housing is difficult due to design constraints, it can be installed by pressing it in from the back of the panel. It is designed for applications where the panel and circuit board that require display are arranged parallel to each other. 【Features】 ■ 3mm lens diameter ■ Three types of lens: flat clear lens, dome diffusion lens, dome clear lens ■ Easy and safe installation from the back of the panel due to the crush rib design ■ Compatible with various surface mount LEDs *For more details, please download the PDF (English version) or feel free to contact us.

  • 515_reverse_mount_image.png
  • 515_available_in_multiple_lenfths.png
  • LED Module
  • Forming Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tabletop Tablet Press HANDTAB-200 (Compatible with IPT Pestle and Mortar Model)

Tabletop Tablet Press HANDTAB-200 (Compatible with IPT Pestle and Mortar Model)

Compatible with rotary tablet press hammers and mortars! A compact tablet press device ideal for pre-production trial tablet pressing.

The "HANDTAB-200" is a manual tabletop tablet press that can be equipped with a pestle and mortar (IPT-B) for rotary tablet machines. With its compact design and no need for power, it allows for manual tablet pressing of a few tablets, making it suitable for tablet testing with small sample sizes. It supports the production of single-layer tablets as well as multilayer tablets, including double-layer and triple-layer tablets. It is ideal for laboratories that already have production facilities, such as those with rotary tablet machines, and is perfect for test tablet pressing before actual production. 【Features】 ■ Compatible with IPT pestle and mortar ■ Compact design with no need for power ■ Ideal for laboratories with existing production facilities ■ Perfect for test tablet pressing before actual production ■ Excellent usability For more details, please refer to the catalog or feel free to contact us.

  • Other processing machines
  • Forming Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Slurry filling molding machine, rotary type

Slurry filling molding machine, rotary type

The next-generation press machine for powder supply and compression molding of powdered cosmetics uses a servo motor in its compression molding mechanism.

■Features of the Device - With a compact machine size and fewer attachments for holders, it reduces mold change time. - Using an optional parts feeder allows for unmanned production. All processes that affect product quality can be controlled via a touch panel, allowing for condition selection, numerical input, and the ability to save and retrieve conditions. - The filling mechanism uses a servo motor, enabling pressurized filling (back) and volumetric filling (front) with a single pump. - The pressing mechanism uses a servo motor to control the positioning of the vacuum pad at high speed up to a certain point, then switches to torque control for pressing. - For preliminary pressing of front-filled products, a special vacuum pad is used to shape without contaminating the intermediate plate. (Patent pending) - The safety-enhanced explosion-proof specification increases the internal pressure within the control panel to prevent the entry of flammable gases. - It monitors air pressure and cuts off the power supply if the air pressure drops.

  • Powder Molding Machine
  • Other packaging machines
  • Forming Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Slurry filling molding line

Slurry filling molding line

The filling is done to align the liquid level without being affected by the variation in the bottle's content volume.

■Features of the Device - All processes that affect product quality can be selected and input through the touch panel, and conditions can be saved and retrieved. - The filling mechanism uses a servo motor, allowing for pressurized filling (back) and quantitative filling (front) with a single pump. - The pressing mechanism also uses a servo motor, performing high-speed positioning control of the vacuum pad up to a certain point, then switching to torque control for pressing. - For preliminary pressing of front-filled products, a special vacuum pad is used, allowing for molding without contaminating the intermediate plate. (Patent pending) - The safety-enhanced explosion-proof specification increases the internal pressure within the control panel to prevent the entry of flammable gases. It monitors air pressure and will cut off the power supply if the air pressure drops.

  • Powder Molding Machine
  • Filling and bottling machines
  • Forming Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Multicolor Powder Filling Molding Machine

Multicolor Powder Filling Molding Machine

It is a device that fills a single medium plate with multicolored powdered cosmetics and performs preliminary compression.

■Features of the Device - To manufacture multi-color products from individual powder presses, assembly work is required; however, in multi-color production, multiple colors can be filled into a single intermediate plate, reducing both intermediate plate costs and assembly work costs. - Up to six colors of powder can be filled and molded without mixing in a single intermediate plate. - The design of the product is flexible, allowing for distinctive products to be created. - There are models available for both small batch production and mass production.

  • Powder Molding Machine
  • Other packaging machines
  • Forming Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Powder Compression Molding Machine 4ST Servo Shot

Powder Compression Molding Machine 4ST Servo Shot

A next-generation press machine for compressing powders of food, cosmetics, pharmaceuticals, and more has been born!

The 4-stage servo shot resolves issues with powder compression products. ■ The hardness of the product is uneven, and the compression density cannot be adjusted. ⇒ By using torque control of the servo motor for compression molding, it is compressed to a consistent product hardness without being affected by the amount of powder filled. ■ Poor air escape during compression molding leads to a two-layer phenomenon. ⇒ Air is released through multi-stage compression during the molding process. Additionally, the lower punch is lowered during powder supply for high-density filling. ■ Cannot achieve porous compression molding. ⇒ By selecting a servo motor for low pressure, stable production of sponge-like porous molded bodies can be achieved. ■ High costs and time-consuming mold changes. ⇒ Mold change costs are low, and the change can be completed in about 15 minutes. ■ The compression molding process is not visible, making adjustments difficult. ⇒ The compression molding waveform is displayed on the monitor each time and saved to an SD card. ■ Using a hydraulic press leads to variations in product quality due to rising oil temperature, poor responsiveness, loud operating noise, and issues like oil mist. ⇒ Since a servo motor is used, product quality does not change with conditions, responsiveness is good, operating noise is low, and it is hygienic.

  • Powder Molding Machine
  • Other packaging machines
  • Other food machinery
  • Forming Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
80 Years of Rubber Molding Machines: Reasons Why Mie Industries is Chosen

80 Years of Rubber Molding Machines: Reasons Why Mie Industries is Chosen

Achieving high precision and excellent quality through in-house integrated production! Responding to various requests for rubber molding machines.

Here are the reasons why Mie Industrial Co., Ltd. is chosen. We achieve high quality based on the solid technology and abundant know-how accumulated over many years, with skilled technicians accurately responding to various requests regarding production capacity and options. Our unique designs, which accurately grasp customer needs and emphasize ease of use, have received support from our customers. **Four Strengths of Mie Industrial** ■ Technical Capability ■ Proposal Capability ■ Design Capability ■ Comprehensive Support System *For more details, please refer to the related links or feel free to contact us.*

  • Vacuum forming machine
  • Forming Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
150TON 500角 3面分解真空式成形機 C type

150TON 500角 3面分解真空式成形機 C type

真空成形機本体に分解装置、油圧装置などがコンパクトに配置されたC type成形機！

当社で取り扱う『150TON 500角 3面分解真空式成形機 C type』について、 ご紹介いたします。 金型を成形機前方の3面分解機で分解する真空成形機。 作業高さは850mmと足場の不要な高さ。 ご用命の際は、当社へお気軽にご相談ください。 【C type成形機】 ■200TON 500角 4面分解真空式成形機 C type ■150TON 500角 3面分解真空式成形機 C type ■150TON 500角 2面分解真空式成形機 C type ※詳しくは関連リンクをご覧いただくか、お気軽にお問い合わせください。

  • Vacuum forming machine
  • Forming Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
150TON 500角 2面分解真空式成形機 C type

150TON 500角 2面分解真空式成形機 C type

ユニットタイプの形状により、納入したその日から作業することが可能！

当社で取り扱う『150TON 500角 2面分解真空式成形機 C type』について、 ご紹介いたします。 金型を成形機前方の2面分解機で分解する真空成形機。 C type成形機は真空成形機本体、分解装置、油圧装置、真空装置、電気制御盤、 手元操作盤がコンパクトに配置された当社の代表機種です。 【C type成形機】 ■200TON 500角 4面分解真空式成形機 C type ■150TON 500角 3面分解真空式成形機 C type ■150TON 500角 2面分解真空式成形機 C type ※詳しくは関連リンクをご覧いただくか、お気軽にお問い合わせください。

  • Vacuum forming machine
  • Forming Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Vacuum Rubber Molding Machine C Type Molding Machine

Vacuum Rubber Molding Machine C Type Molding Machine

Equipped with safety area sensors and covers for safety!

We would like to introduce our vacuum rubber molding machine, the "C type molding machine." This representative model of our company features a compact arrangement of the vacuum molding machine body, disassembly device, hydraulic device, vacuum device, electrical control panel, and hand-operated control panel. Thanks to its unit-type design, it can be operational from the day it is delivered, and it is also easy to move and relocate. 【Product Lineup】 ■200TON 500 square 4-sided disassembly vacuum molding machine C type ■150TON 500 square 3-sided disassembly vacuum molding machine C type ■150TON 500 square 2-sided disassembly vacuum molding machine C type *For more details, please refer to the related links or feel free to contact us.

  • Vacuum forming machine
  • Forming Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mitsubishi Heavy Industries, Ltd. "Molding Machine"

Mitsubishi Heavy Industries, Ltd. "Molding Machine"

We can also design and manufacture outside of standard specifications, so please feel free to consult with us!

We would like to introduce the "molding machines" handled by Sanju Industrial Co., Ltd. After the mold is disassembled vertically within the molding machine due to the downward motion of the molding machine, it is moved to the front of the molding machine. We offer models such as the "350TON 950×500 two-sided disassembly vacuum molding machine" and the "400TON 600 square two-sided disassembly vacuum molding machine." Additionally, we also have a compact machine with a capacity of 15TON, which integrates the molding machine body, hydraulic pump, and electric control panel, called the "15TON 250 square single-stage molding machine." 【Product Lineup】 ■ 350TON 950×500 two-sided disassembly vacuum molding machine ■ 400TON 600 square two-sided disassembly vacuum molding machine ■ 15TON 250 square single-stage molding machine *For more details, please refer to the related links or feel free to contact us.

  • Vacuum forming machine
  • Forming Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Test molding welcome! 200-ton vacuum three-sided split compression rubber molding machine.

Test molding welcome! 200-ton vacuum three-sided split compression rubber molding machine.

With slow pressure increase control of 0.1 to 99.99 sec/MPa, for precise molding from low pressure, choose MIE-205V3! It also achieves energy saving, space saving, and low noise.

The "MIE-205V3" is a vacuum three-sided decompression compression molding machine designed for 200T500 square specifications, featuring a compact design with a body size of 1,260mm in width and 2,400mm in depth, making it easy to install. It allows for easy material setup and product retrieval, achieving excellent workability. Additionally, it supports slow pressure increase control from low pressure. Since the machine is permanently installed in a dedicated test room, free demonstrations and test molding with the demo machine are available. We encourage you to experience its performance firsthand. 【Features】 ■ A wide range of air release operation patterns proposed ■ Clamping pressure can be accommodated from 2MPa to below 19.8MPa ■ Real-time measurement of mold temperature inside the vacuum case during molding (optional) ■ Precision molding supported by slow pressure increase control from low pressure (0.1 to 99.99 sec/MPa) ■ Single unit configuration: all equipment mounted on a common base, enabling same-day operation ■ Mold sizes can accommodate up to 500mm *For more details, please download the PDF or feel free to contact us.

  • Vacuum forming machine
  • Forming Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RPF molding device

RPF molding device

A recycling device that molds paper and other waste into solid fuel known as RPF.

DYZZER is an RPF molding device that is optimal for small to medium-sized processing facilities. RPF stands for "Refuse Paper & Plastic Fuel," which is a high-calorie solid fuel made primarily from industrial waste, specifically old paper and plastic that are difficult to recycle materially. RPF is used as a substitute for fossil fuels and is gaining attention as an efficient recycling method because it allows waste to be reused as an energy source.

  • Hazardous material processing
  • Forming Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wood pellet molding machine

Wood pellet molding machine

One of the largest production capacities in the country (700 kg/hour and above)

This is a wood pellet molding machine for materials such as cedar, European red wood, kenaf, bamboo powder, oil cake + sawdust, and planer shavings. It can also be used as a pellet molding machine for other materials like chicken manure, cow manure, rice husks, and compost.

  • others
  • Forming Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hydraulic Press Molding Machine for "Powdered Ceramic and Teflon (PTFE) Molding"

Hydraulic Press Molding Machine for "Powdered Ceramic and Teflon (PTFE) Molding"

Easy product extraction! Hydraulic press molding machine ideal for powder molding.

The "Powder Ceramic, Teflon (PTFE) Molding" is a hydraulic press molding machine designed for powder molding. It is equipped with 32-ton cylinders on the top and bottom, allowing for clamping between 5 to 32 tons. Additionally, the intermediate plate is movable up and down, making it easy to remove products. We select and control equipment that meets customer requirements from proportional valves, servos, and inverters. 【Features】 ■ Products can be easily removed. *For more details, please feel free to contact us.

  • Powder Molding Machine
  • others
  • Forming Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hydraulic Press Molding Machine "Powder Ceramic, Teflon (PTFE) Molding"

Hydraulic Press Molding Machine "Powder Ceramic, Teflon (PTFE) Molding"

Ideal for large-scale powder pressing! A hydraulic press molding machine that can accommodate a wide variety of products.

The "Powder Ceramic, Teflon (PTFE) Molding" is a hydraulic press molding machine custom-made to accommodate large-scale powder press molding. In powder molding, it is common to achieve uniform powder compression using a double-clamping method; however, in the case of large machines like this one, which has a capacity of 700 tons, the machine size and cost also increase significantly. Therefore, this machine adopts an intermediate float system. It is capable of handling a wide variety of products through speed and pressure control using a proportional valve. 【Features】 ■ Capable of large-scale powder press molding ■ Adopts an intermediate float system *For more details, please feel free to contact us.

  • Hydraulic Equipment
  • Forming Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
300-ton heating and cooling press molding machine

300-ton heating and cooling press molding machine

Maintaining press pressure, rapid cooling begins from 370℃! It is possible to manufacture various products.

This product is a press that can handle all types of molding with CFRP (carbon fiber reinforced plastic), thermosetting resins, and thermoplastic resins. It rapidly cools from 370°C to 50°C while maintaining the set pressing pressure. It enables the production of various products. 【Features】 ■ Rapid cooling can start from 370°C while maintaining the pressing pressure ■ Fine control is possible through the linkage of temperature control and pressing pressure control ■ Pressure flow settings can be changed freely with a servo and inverter hydraulic unit ■ Data recording and output for temperature, pressure, position, etc., are possible ■ Modifications can be made to meet specified safety categories *For more details, please refer to the PDF document or feel free to contact us.

  • Heating device
  • Cooling system
  • others
  • Forming Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High cost advantage, blow molding of fluororesin (ETFE) is possible!

High cost advantage, blow molding of fluororesin (ETFE) is possible!

By blow molding, commercialization is possible at a cost of 1/10 to 1/20 compared to machined products!

Yamato Chemical Industry Co., Ltd. is a manufacturer specializing in industrial plastics. We possess three types of molding methods (blow molding, injection molding, and vacuum molding) and have in-house 3D printers, enabling us to provide a one-stop service. As a result, we can accommodate orders and deliveries on the same day at the shortest possible notice. Recently, in response to customer requests, we have completed the prototype development of blow molding using fluororesin (ETFE). We are currently preparing for mass production. Fluororesin (ETFE) has one of the highest levels of chemical resistance among all resins, as well as excellent heat resistance, electrical properties, and weather resistance. We have successfully achieved blow molding with this material. Blow molding allows for significantly reduced material loss compared to machined products, enabling dramatic cost reductions. Cost reductions of 1/10 to 1/20 are possible. If you contact us, we will provide the best proposal tailored to your needs. *For more details, please download the PDF or contact us.

  • others
  • Blow Molding Machine
  • Forming Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
1-cycle automatic molding machine

1-cycle automatic molding machine

Continuous pressing with the set pressure! 1-cycle automatic molding machine.

Automatic one-cycle operation, easy to operate and install! Hydraulic forming machine. 【Features】 - Continuous pressure type (pressurizes at the set pressure) - Integrated structure for excellent stability, no special foundation work required - Pressure adjustment available with pressure switch type and continuous pressure type - Heating plates manufactured with high precision in both parallelism and flatness - Energy-saving type available using IPM motors (allows for precise surface pressure settings)

  • Other machine tools
  • Hydraulic Equipment
  • Forming Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Forming Machine

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.