Greaseのメーカーや取扱い企業、製品情報、参考価格、ランキングをまとめています。
イプロスは、 製造業 BtoB における情報を集めた国内最大級の技術データベースサイトです。

Grease - メーカー・企業14社の製品一覧とランキング

更新日: 集計期間:Sep 17, 2025~Oct 14, 2025
※当サイトの各ページの閲覧回数を元に算出したランキングです。

Greaseのメーカー・企業ランキング

更新日: 集計期間:Sep 17, 2025~Oct 14, 2025
※当サイトの各ページの閲覧回数を元に算出したランキングです。

  1. null/null
  2. 理経 Tokyo//IT/Telecommunications
  3. オーデック Tokyo//Chemical
  4. 4 エムアンドエム Kanagawa//Machine elements and parts
  5. 5 ワイドワーク Tokyo//Industrial Electrical Equipment

Greaseの製品ランキング

更新日: 集計期間:Sep 17, 2025~Oct 14, 2025
※当サイトの各ページの閲覧回数を元に算出したランキングです。

  1. Grease "Calforex EP"
  2. Ultra-high vacuum fluorine grease "Rogenest Lambda ZLVP"
  3. 現場を守るリチウムを超えた次世代万能グリース「ユーレットWEP」
  4. 4 General-purpose grease "Nippeco MP" suitable for various industrial applications.
  5. 5 Biomass grease that contributes to reducing power consumption and lowering carbon dioxide emissions.

Greaseの製品一覧

1~15 件を表示 / 全 38 件

表示件数

Rescue System Roll Grease R550

Lightweight and compact, making it easy to carry! It excels in situations where rescue is difficult and time is of the essence.

"Roll Grease" is a product designed for rapid emergency rescue from high places such as wind power plants, transmission towers, and commercial facilities. Generally, lifts or buckets are used for rescue from high places. However, rescues from high places without lifts or buckets are extremely difficult. Moreover, in situations where rescue is needed, time can be a matter of life and death. In urgent situations, one cannot wait for the rescue team to arrive for several tens of minutes. Our Roll Grease excels in situations where rescue is difficult and time is critical. 【Features】 ■ Easy to operate ■ Used for emergency rescue from high places ■ Lightweight and compact for easy portability ■ Descent speed is automatically controlled ■ Equipped with a wheel for winding up, used when detaching the person in need of rescue from the fall prevention system they are connected to.

  • Other safety equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Thermal Conductive Grease | Heat Away 641EV (Aremco)

This is a grease blended with silver micro-powder, which excels not only in thermal conductivity but also in electrical conductivity. Furthermore, it has low outgassing, making it usable in a vacuum.

"Heat Away 641EV" is a grease mixed with fine silver powder, excelling not only in thermal conductivity but also in electrical conductivity. The applicable temperature range is -51°C to 288°C.

  • Chemicals
  • Coating Agent

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Heat-resistant, high thermal conductivity grease SilverIce710NS

It is a high thermal conductivity and conductivity grease with silver filler based on a non-silicone formula.

The SilverIce 710NS developed by TIMTRONICS is a high thermal conductivity and conductivity grease with silver filler, based on a non-silicone formula that is repairable. It is applied between heat-generating components and heat-dissipating components to facilitate rapid and efficient heat transfer and dissipation. 【Features】 ● Designed with special pure silver particles to maximize the contact between fine particles, achieving the most effective thermal conductivity and the lowest thermal resistance. ● Its low viscosity and excellent wettability ensure that the thickness of fine bond wires and films required by the application does not dry out during temperature supply. ● Being a non-silicone grease, it does not produce low molecular siloxanes, eliminating issues such as electrical contact failures.

  • Industrial PCs
  • Other polymer materials
  • Embedded Board Computers

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Silicone-free thermal grease with thermal conductivity of 3.5 W/m·K

Silicone-free thermal grease that does not cause electrical contact failure.

● Since it does not use silicone-based materials, low molecular siloxanes do not occur, preventing electrical contact failures. ● It is a grease with low thermal resistance and long-term stability. ● It is applied between the heating element and the heat sink to enhance thermal conductivity. ● It has a moderate viscosity, making it easy to spread evenly. ● It is non-conductive.

  • Other electronic parts

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

High Thermal Conductivity Non-Silicone Thermal Grease

There is no generation of low molecular weight siloxane, and there are no issues such as electrical contact failure.

It can be applied between the heat-generating body (such as a CPU) and the heat-dissipating body (such as a CPU cooler or heat sink) to fill in the small gaps and efficiently transfer heat to the heat-dissipating body. 【Features】 ● It is a high-performance thermal grease with a thermal conductivity of 9.0 W/m·K. ● It does not use silicone-based materials, so low molecular siloxanes are not generated, eliminating issues such as electrical contact failure. ● It is a high heat-resistant grease that can withstand temperatures up to 200°C. ● It is insulating. ● It is compliant with RoHS.

  • Other polymer materials

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

High Thermal Conductivity Non-Silicone Thermal Grease KennThermZ1

Since silicone-based materials are not used, low molecular weight siloxanes do not occur, and there are no issues such as electrical contact failures.

It can be applied between the heat-generating component (such as CPU, LED, etc.) and the heat-dissipating component (such as heat sink, etc.) to fill in the fine gaps and efficiently transfer heat to the heat-dissipating component. 【Features】 - A grease with low dry-out and long-term stability due to low thermal resistance. - Soft and easy to spread evenly. - Insulating properties. - Compliant with RoHS2.0. - Test results from a LiDAR unit show that it does not dirty the monitor lens. (Test duration: 360 hours)

  • Other electronic parts
  • Other polymer materials

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Grease ECO

Removes over 99% of fats and oils flowing out through drainage. The collected oil is recyclable.

It is possible to treat wastewater without relying on grease traps. Since we do not use any bioproducts or oil-absorbing materials, considerations for the environment and maintenance costs after installation are kept low.

  • Wastewater/wastewater treatment equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

New type oil damper collector Grease ECO

Earth environment technology based on the 'mottainai' concept that creates a sustainable future chosen by the world.

Until today, the treatment of wastewater mixed with fats and oils from restaurants and ramen shops has been handled by grease traps, which are devices that collect grease. However, the efficiency of grease collection has not been adequate for current conditions, and management has been difficult, resulting in a significant amount of oil flowing into sewers, purification facilities, and rivers. Recently, fats and oils clogged in sewer pipes have turned into white solid objects (oil balls) that have washed up on the beaches of Tokyo Bay, causing serious environmental issues. The solution developed for this problem is the world's first sink-type grease collector, "Grease ECO." It separates and collects only the oil using specific gravity separation at the kitchen sink, which is the very beginning of the wastewater stream. The collected oil is of high purity and can be reused as industrial raw materials. What was previously considered waste is now revitalized as a recyclable resource, complying with the Food Recycling Law. No bioagents or chemicals are required, and the only running cost is the electricity needed to operate the device. The amount of fats and oils flowing into the grease trap is reduced to less than one-hundredth, eliminating the need for frequent cleaning and waste collection costs, thus enabling significant cost reductions in wastewater treatment. For more details, please contact us or refer to the catalog.

  • Food environmental hygiene/contamination prevention equipment
  • Oil-water separator

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

High vacuum grease (50g can)

A versatile lubricant with excellent solvent resistance, water resistance, and chemical resistance.

It does not dissolve in alcohol, ketones, or glycols, but it dissolves in aliphatic, aromatic, ether, and chlorine-based solvents. Additionally, it is stable against most mineral oil-based and plant-based oils, as well as many organic chemicals and gases. Features: - Highly refined to remove volatile components, achieving a high vacuum of 10^-6 mmHg. - Usable over a wide temperature range (approximately -40 to 204°C). In the absence of oxygen, it can be used up to 260°C. - Chemically stable, it is hardly oxidized even at high temperatures, has excellent oil and chemical resistance, and does not dissolve in water. - It has excellent insulating properties. - It has minimal impact on human health.

  • Lubricants

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Mold-specific grease, various types

Protecting molds, supporting the workplace. A selection of high-performance grease lineup.

At M&M, we offer high-performance greases compatible with various types of mold forming machines. Depending on the application and cost, you can choose the optimal product from **fluorine-based greases (high heat resistance and long lifespan) and lithium-based greases (high-temperature operation and cost-focused)**. These greases are ideal for lubrication of movable and sliding parts, as well as heating and cooling sections, supporting stable operation of production lines. In particular, fluorine-based greases demonstrate excellent lubrication and oxidation stability even in processes where stopping movement is difficult, or in high-temperature and high-load environments. On the other hand, lithium-based greases achieve high cost performance in settings where regular maintenance is assumed. We have a proven track record in diverse industries such as manufacturing, resin molding, die casting, and food containers. With a reliable domestic supply system, we deliver stable quality and prompt responses.

  • Press Dies
  • Plastic Mould
  • Lubricants

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Multipurpose grease

High temperature × water resistance × high adhesion. A versatile grease compatible with all machines.

M-HMT is a multipurpose high-performance grease for machinery that exhibits stable lubrication performance even in high-temperature, high-load, and high-humidity environments. With excellent heat resistance, water resistance, and strong adhesion, this grease is ideal for areas where "dripping" or "splashing" of grease is a concern, such as bearings, moving parts, and sliding surfaces. It stays firmly in place where lubrication is needed and maintains its lubricating performance over a long period. By using lithium-based thickeners, it helps prevent oil film breakage and seizing, reducing maintenance frequency and contributing to the extension of machine life. It is used in a wide range of fields, including molds, construction machinery, and industrial equipment, and is highly regarded as a "universal grease." ✅ Features - **High-temperature compatibility (operating temperature range: -20°C to 200°C)** to prevent seizing and oil film breakage - Stable lubrication even in high-speed rotation or vibration areas due to strong adhesion and anti-splash properties - Excellent water resistance, making it usable in humid or water-exposed environments - High pressure and load resistance, maintaining lubrication performance even in high-load conditions - Utilizes the versatility of lithium-based grease to accommodate various materials and equipment - Economical and easy to handle, making it ideal as a staple for mold and machinery maintenance.

  • Lubricants
  • Chains and sprockets
  • Metal bearings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Mold grease for food containers

Food container-specific grease that balances safety and performance.

"MK-FOD," a high-performance grease certified NSF-H1, is optimal for the molding process of food containers. This special synthetic grease, formulated with PTFE (fluoropolymer), exhibits stable lubrication performance over a wide temperature range of -20°C to 235°C. By applying it to sliding parts of molds and ejector pins, it reduces the risk of wear and seizure, significantly extending maintenance intervals. Its translucent type eliminates concerns about adhesion or discoloration on molded products, making it safe for use in environments where food hygiene is required. It contains no harmful components such as lead or molybdenum, minimizing adverse effects on molds and resin materials. It has been adopted in many settings as the definitive solution for mold maintenance in food packaging and sanitary equipment.

  • Plastic Mould
  • Mold
  • Lubricants

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Mold grease for general molds

Just right is the best. The optimal solution for the cost of mold grease.

MK-DEM is a grease for molds developed with a focus on "versatility that can be widely used for all types of molds" and "appropriate cost." Rather than being an overly high-performance, over-spec product, it balances sufficient performance and cost reduction by optimizing for usage temperatures around 180°C and typical molding conditions. It provides stable lubrication and adhesion in areas where you want to prevent seizure and wear, such as split parts, pin parts, and slide parts. "Because it's something you use every day, it needs to have just the right performance at just the right price" — this is a practical grease that responds to the voices from the field.

  • Plastic Mould
  • Other molds
  • Lubricants

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

FIM3 Spray Grease (White Grease with Fluororesin)

There is no oil separation, so there is less oil seepage to the surrounding areas!

We would like to introduce the "FIM3 Spray Grease (White Grease with Fluororesin)" that we handle. It has strong adhesion to metals and resins, maintaining high torque in sliding and rotating parts. Despite being a high-viscosity grease, it can be used over a wide temperature range from low to high temperatures. We also offer "caster screws" and "wrenches." 【Features】 ■ Water-resistant ■ Excellent noise reduction ■ Temperature difference tolerance *For more details, please download the PDF or feel free to contact us.

  • spray

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録