We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Grindstone.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Grindstone(300) - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.

Grindstone Product List

31～60 item / All 60 items

Displayed results
HASHIMOTO C whetstone

HASHIMOTO C whetstone

To enable the polishing of relatively low-hardness steel materials, high-quality black silicon carbide was used.

This product is a grinding wheel developed to facilitate the upgrading of grit size for pre-hardened steel materials with a hardness of HRC 40 or lower. To enable the grinding of relatively low-hardness steel materials, high-quality black silicon carbide with uniform particle size is used as the abrasive. It has excellent toughness and moderate cutting power. It is preferable to use this product on steel materials with a hardness of HRC 40 or lower. 【Features】 - Developed to facilitate grit size upgrading for pre-hardened steel materials with a hardness of HRC 40 or lower - Excellent toughness and moderate cutting power - Preferably used on steel materials with a hardness of HRC 40 or lower *For more details, please refer to the PDF document or feel free to contact us.

  • Grindstone
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Spot Cutter "SI-5800"

Spot Cutter "SI-5800"

One EG Cutter Mini is included! It features a two-stage clamp lever.

The "SI-5800" is a spot cutter specifically designed for spot removal work. It features a two-stage clamp lever. One "EG Cutter Mini," suitable for ultra-high-tensile steel plates, is included, and a set (containing 3 pieces) is also available as an option. [Features] ■ Dedicated for spot removal work ■ Two-stage clamp lever *For more details, please refer to the PDF document or feel free to contact us.

  • Work tools
  • drill
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Achieving a 30% reduction in grinding wheels! Saiyo Wheel

Achieving a 30% reduction in grinding wheels! Saiyo Wheel

A leading grinding wheel manufacturer in China with a wealth of experience in the Japanese market. A comprehensive range of products for semiconductors, electronic components, tools, automotive, and molds!

Saiyo Wheel was established in Jiangsu Province, China, in 2001 and primarily manufactures precision diamond and CBN wheels, as well as ultra-thin ultra-precision diamond and CBN wheels. Over the course of approximately 20 years, it has steadily grown its business and has now become one of the leading grinding wheel manufacturers in China. One-third of its products are exported to countries and regions such as Japan, North America, and Europe, and in Japan, they are specifically adopted by major automobile manufacturers and tier 1 parts manufacturers.

  • サイヨー２.png
  • サイヨー３.jpg
  • サイヨー４.jpg
  • サイヨー6.jpg
  • Grindstone
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Super Abrasive Grinding Stone Dresser "X POWER"

Super Abrasive Grinding Stone Dresser "X POWER"

Contributing to environmental conservation! By using a dresser with the same shape as the product, single setup is possible.

"X POWER" is a dresser for super abrasive grinding wheels (CBN wheels and diamond wheels) that efficiently processes truing and dressing simultaneously. It is highly effective not only for resin bond wheels but also for vitrified bond and metal bond super abrasive wheels in truing and dressing. Compared to conventional methods (such as truing with soft steel grinding or WA), the truing time can be significantly reduced. It can accommodate the shapes and sizes desired by customers. 【Features】 ■ The cutting performance after truing is extremely good → By grinding with X POWER, the bond of the grinding wheel is removed. ■ The structure and usage method are simple → Does not require special equipment. ■ The shape can be changed according to the application → Offers flexibility and can accommodate various equipment. *For more details, please refer to the PDF document or feel free to contact us.

  • Grindstone
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Precision Cutting Wheel "Japan Disc Resin Bond Cutting Wheel"

Precision Cutting Wheel "Japan Disc Resin Bond Cutting Wheel"

A stunning cut surface! This cutting wheel is ideal for fine cutting of difficult-to-machine materials.

The "Japanese Disc Resin Cutting Wheel" is manufactured using a special process and can be used dry, but it particularly demonstrates excellent performance when used wet. The thickness accuracy is exceptionally high, and it is especially effective when used in conjunction with the precision automatic cutting machines from Japanese Disc Industry. It is highly recommended for precise and fine cutting of difficult-to-cut materials. 【Features】 - A thin cutting wheel capable of cutting various metal pipes and solid materials with high precision and good cutting surfaces. → Various metals: iron, SUS, tungsten, molybdenum, Inconel, etc. - No clogging or burning, resulting in good cutting surfaces. - Excellent cutting performance allows for high cutting precision. - Cutting wheels are indispensable for cutting items such as syringes, industrial pipes, and electronic components. For more details, please contact us or download the catalog.

  • Grindstone
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultra-compact outer diameter grinding unit "Cylindrical System GU-1"

Ultra-compact outer diameter grinding unit "Cylindrical System GU-1"

From conventional lathes to NC machines! An ultra-compact outer diameter grinding unit that is also ideal for large-diameter internal diameter grinding.

The "GU-1" is a super compact outer diameter grinding unit equipped with a Φ100 flat grinding wheel, maintaining the excellent basic functions of conventional products. The spindle is a newly developed dedicated No.6. The grinding wheel flange is equipped with a balance weight that can be precisely adjusted using the included air bearing type non-contact balancer, ensuring quiet, vibration-free, and accurate rotation. 【Features】 ■ After cutting with a tool, you can start the grinding operation without changing setups. ■ Capable of high-precision grinding. ■ Due to its unit configuration, you can select the spindle and grinding wheel according to the workpiece size. *For more details, please download the PDF or feel free to contact us.

  • Company：UHT
  • Price：Other
  • Wafer processing/polishing equipment
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Introduction of the mold grinding stone "WA" - Samples available.

Introduction of the mold grinding stone "WA" - Samples available.

The most commonly used whetstone.

The product we would like to introduce from our main product line of grinding wheels is the "WA" product. The WA grinding wheel is a ceramic-based grinding wheel that uses WA abrasive grains and is the most common type. It has good breakage resistance and generates little heat, making it suitable for grinding operations with a wide contact area between the workpiece and the grinding wheel, as well as for finishing and light grinding of high-speed steel and special steel. Currently, we are offering free samples, so please feel free to contact us for more details!! ↓↓↓ --------------------------------------------- Yamato Seito Co., Ltd. Sales Department 5-1613 Hata, Kashiba City, Nara Prefecture 639-0245 TEL: 0745-77-2955 FAX: 0745-78-0667 Email: yamato@yamatoseito.co.jp URL: http://www.yamatoseito.co.jp ---------------------------------------------

  • Grindstone
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Introduction of the mold grinding stone "GC" - Samples available.

Introduction of the mold grinding stone "GC" - Samples available.

Using GC, the hardest among the abrasive grains.

The product we would like to introduce from our main product line of mold grinding wheels is the 'GC' product. This is a ceramic grinding wheel that uses GC abrasive grains, which have the highest hardness among abrasives. It generates little heat, making it suitable for grinding materials that are sensitive to heat. It enables precise grinding of hard materials such as carbide tools and superalloys. Currently, we are offering free samples, so please feel free to contact us for more details!! ↓↓↓ --------------------------------------------- Yamato Seito Co., Ltd. Sales Department 5-1613 Hata, Kashiba City, Nara Prefecture 639-0245 TEL: 0745-77-2955 FAX: 0745-78-0667 Email: yamato@yamatoseito.co.jp URL: http://www.yamatoseito.co.jp ---------------------------------------------

  • Grindstone
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Introduction of the mold grinding stone "YTM" - Samples available.

Introduction of the mold grinding stone "YTM" - Samples available.

Perfect for final finishing and mirror polishing!

The product we are introducing this time from our main product line of mold grinding wheels is called 'YTM'. 'YTM' is a resin-based grinding wheel developed for the final finishing and mirror polishing of molds. It provides an excellent gloss with a soft touch and moderate strength (equivalent to wood pieces). It is ideal for corners and grooves that are difficult to polish with paper, achieving more than five times the gloss compared to ceramic grinding wheels. The grinding wheels are color-coded by grain size, making them easy to manage, and they can be safely used for polishing non-ferrous metals. The grinding wheels come in two hardness types: hard and soft. *Due to being a flammable solid, please ensure that the grinding wheels are dried naturally. This can cause a fire hazard. Currently, we are offering free samples, so please feel free to contact us for more details!!

  • Grindstone
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Arkansas stone

Arkansas stone

Natural whetstone produced in Arkansas, United States, boasting world-class quality.

Arkansas stones are natural sharpening stones produced in the Ouachita Mountains of Arkansas, United States. This raw material is called novaculite, a sedimentary rock composed of microcrystalline quartz, recognized as a type of chert that has recrystallized, and it consists of over 99 percent pure silica. Novaculite is a sharpening stone that is almost nonexistent outside the Ouachita Mountains of Arkansas, making it the finest polishing stone in the world. **Grades of Arkansas Stones** Soft Arkansas Stone (medium grit, specific gravity 2.25–2.30) Hard Select Arkansas Stone (fine grit, specific gravity 2.30-2.45) True Hard Arkansas Stone (extra fine grit, specific gravity 2.5 or higher) Black Hard Arkansas Stone (extra fine grit, specific gravity 2.5 or higher) Translucent Hard Arkansas Stone (extra fine grit, specific gravity 2.5 or higher) Arkansas stones and novaculite are classified by specific gravity rather than grain size.

  • ArkansasStones.jpg
  • arkansas1.jpg
  • arkansas2.jpg
  • arkansas3.jpg
  • arkansas4.jpg
  • arkansas5.jpg
  • arkansas6.jpg
  • arkansas7.jpg
  • arkansas8.jpg
  • Grindstone
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-efficiency flat grinding wheel "V BORON"

High-efficiency flat grinding wheel "V BORON"

Even difficult-to-machine materials can be easily finished with high precision! It prevents the rise in processing costs with outstanding economic efficiency.

"V BORON" is an exceptional grinding stone that allows for easy dressing with a single stone, emphasizing ease of use and outstanding sharpness. It enables high-precision grinding finishes even for difficult-to-machine materials. It can be used for both dry and wet applications, making it suitable for various grinding purposes according to your needs. Additionally, it can shorten working time, providing excellent economic efficiency and preventing rising processing costs. 【Features】 ■ Easy dressing with a single stone ■ High-precision grinding finishes for difficult-to-machine materials ■ Usable for both dry and wet applications ■ Reduces working time ■ Prevents rising processing costs with excellent economic efficiency *For more details, please refer to the PDF document or feel free to contact us.

  • Company：TKX
  • Price：Other
  • Grindstone
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Introduction of the mold grinding stone "YTM" - Samples available.

Introduction of the mold grinding stone "YTM" - Samples available.

Perfect for final finishing and mirror polishing!

The product we would like to introduce from our main product line of mold grinding wheels is the "YTM." The "YTM" is a resin-based grinding wheel developed for the final finishing and mirror polishing of molds. It provides a wonderful gloss due to its soft touch and moderate strength (equivalent to wood). It is ideal for corners and grooves that are difficult to polish with paper, and it achieves more than five times the gloss compared to ceramic grinding wheels. The grinding wheels are color-coded by grit size, making them easy to manage, and they can be safely used for polishing non-ferrous metals. The grinding wheels come in two hardness types: hard and soft. *As it is a combustible solid, please ensure that the grinding wheels are dried naturally. This can cause a fire hazard. Currently, we are offering free samples, so please feel free to contact us for more details! ↓↓↓

  • Grindstone
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Introduction of the mold grinding stone "YHZ" - Samples available.

Introduction of the mold grinding stone "YHZ" - Samples available.

All-rounder in mold grinding

The product we would like to introduce from our main product line of mold grinding wheels is the 'YHZ'. The 'YHZ' is a ceramic grinding wheel developed for semi-finishing and finishing applications. While the grinding wheel does wear slightly, it exhibits outstanding grinding performance. It is an all-rounder that can be adapted to all types of mold steel, regardless of whether dry or wet grinding is used. It also has good compatibility with both oil-based and water-soluble oils, and it is environmentally friendly, containing no harmful substances to humans or the environment. The hardness of the grinding wheel comes in two types: "L" (hard) and "J" (soft). Currently, we are offering free samples, so please feel free to contact us for more details!! ↓↓↓ ---------------------------------- Yamato Seito Co., Ltd. Sales Department 5-1613 Hata, Kashiba City, Nara Prefecture 639-0245 TEL: 0745-77-2955 FAX: 0745-78-0667 Email: yamato@yamatoseito.co.jp URL: http://www.yamatoseito.co.jp

  • Grindstone
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Introduction of the mold grinding stone "YHB" - Samples available.

Introduction of the mold grinding stone "YHB" - Samples available.

Suitable for dry use.

The product we would like to introduce from our main product line of mold grinding wheels is the "YHB." The "YHB" is a ceramic grinding wheel for rough to medium finishing, which is impregnated with general-purpose phenolic resin on a WA grinding wheel. Due to its high resin strength, it is less likely to break under heavy loads during grinding, such as rib polishing, and it experiences less wear even when grinding rough surfaces. It is suitable for cases where a dry-use option is needed. The hardness of the grinding wheel is of type "I." We are currently offering free samples, so please feel free to contact us for more details!! ↓↓↓ ---------------------------------- Yamato Grinding Wheel Co., Ltd. Sales Department 5-1613 Hata, Kashiba City, Nara Prefecture 639-0245 TEL: 0745-77-2955 FAX: 0745-78-0667 Email: yamato@yamatoseito.co.jp URL: http://www.yamatoseito.co.jp

  • Grindstone
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Introduction of the mold grinding stone "YHB-T" - Samples available.

Introduction of the mold grinding stone "YHB-T" - Samples available.

The mold grinding stone with the highest strength in the YH series.

The product we would like to introduce from our main product line of mold grinding wheels is the 'YHB-T'. This is a ceramic grinding wheel for rough to medium finishing, which is impregnated with high-fracture-resistance phenolic resin in WA grinding wheels, and it is the strongest product in the YH series. It provides a smooth finish when cutting and removing the altered layer of materials after machining or electrical discharge machining, especially when surface roughness is a priority. Additionally, due to its strength, it is less likely to break during roughing operations under load or when working with small-sized grinding wheels. However, it tends to clog easily in dry conditions, so please use it wet. We recommend "BLUE CUT" from our company. The hardness of the grinding wheels comes in three types: "L" (hard), "J" (medium), and "H" (soft). Currently, we are offering free samples, so please feel free to contact us for more details!! ↓↓↓

  • Grindstone
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Introduction of the mold grinding stone "YHS" - Samples available.

Introduction of the mold grinding stone "YHS" - Samples available.

It has a strong retention of sulfur intensity, is difficult to break, and has excellent workability.

The product we would like to introduce from our main product line of mold grinding stones is the product called "YHS." This is a grinding stone that has sulfur impregnated into a WA grinding stone. By adhering sulfur to the pore walls of the grinding stone, it can prevent grinding marks on molds. It has a moderate strength retention of sulfur, making it less likely to break and excellent in workability. Additionally, the lubricating effect of sulfur improves the surface roughness of the mold and significantly reduces the wear of the grinding stone. The hardness of the grinding stone is of type "I." (Note) As it is a flammable solid, please ensure that the grinding stone is dried naturally. It may cause a fire. Currently, we are offering free samples, so please feel free to contact us for more details!! ↓↓↓ ---------------------------------- Yamato Seito Co., Ltd. Sales Department 5-1613 Hata, Kashiba City, Nara Prefecture 639-0245 TEL: 0745-77-2955 FAX: 0745-78-0667 Email: yamato@yamatoseito.co.jp URL: http://www.yamatoseito.co.jp

  • cutter
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
A must-see for those struggling with burrs, polishing, and grinding! We support burr removal and polishing!

A must-see for those struggling with burrs, polishing, and grinding! We support burr removal and polishing!

A smooth surface without bumps and unevenness! Remove secondary burrs, small scratches, oxidation film after discharge machining, dirt, and rust with the 'rubber grinding stone'! *Exhibited at Gear Festa 2023.

We sell a unique elastic ceramic rubber grinding wheel that incorporates ceramic and uses rubber itself as the bonding material. Okasugi's finishing rubber grinding wheels are made with a special rubber bonding material, allowing them to deform while working to smooth the surface of the base material, resulting in a smooth finish without any unevenness. Furthermore, we manufacture and sell various precision machines that make the most of these rubber grinding wheels. We offer a wide range of products, including the finishing rubber grinding wheel "Gomangoku Stick," the lightweight and compact grinder "Low-Speed Scat Sander," and the "Tabletop Shaft-mounted Deburring Machine" for inner and outer surfaces. 【Product Lineup (Partial)】 ■ Gomangoku Stick ■ Low-Speed Scat Sander ■ Corner Polisher Patriot 100 ■ Handy Disk (Uribou) ■ Tabletop Shaft-mounted Deburring Machine 【Gear Festa 2023 Exhibition Information】 Venue: Tennozu Isle Sea Fort Square and Factory Gear Tokyo Store Date: June 24, 2023 (Saturday) Time: 13:00 - 22:00 *Special venue until 19:00 *For more details, please refer to the PDF document or feel free to contact us.

  • Other processing machines
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cutting Wheel "Super Little"

Cutting Wheel "Super Little"

The definitive version of the small path grinding wheel! A long-selling cutting wheel from the Super Series.

"Super Little" is a product of Keimoto Seisakusho, which manufactures and sells various screws and construction materials. It is a long-selling cutting wheel from the Super Series, known for its exceptional sharpness and durability. [Features] - Long-selling product - Excellent sharpness and durability - Suitable for lightweight steel frames and interior construction materials like sashes *For more details, please refer to the PDF document or feel free to contact us.

  • Other consumables
  • Other machine elements
  • Grindstone
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Soft Alkanthas (Naka-me) MAP-14A-T

Soft Alkanthas (Naka-me) MAP-14A-T

The most popular whetstone among the grades of Novaculite. It is suitable for customers who want to sharpen knives and tools quickly.

● A versatile whetstone mainly used by sculptors, outdoor sports enthusiasts, butchers, commercial knife sharpeners, and housewives. ● The color of the soft Alcanthus whetstone is often white, gray and black, or pink and gray. ● This is the thinnest Alcanthus whetstone with the lowest specific gravity density. The whetstone contains various mixed colors. ● Since it is quarried from nature, you cannot specify the size, mesh, color, etc. Please choose from the item number.

  • magnet
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Soft Alcanthas (Chūme) MAP-14-T

Soft Alcanthas (Chūme) MAP-14-T

The most popular whetstone among the grades of Novaculite. It is suitable for customers who want to sharpen knives and tools quickly.

● A versatile whetstone mainly used by sculptors, outdoor sports enthusiasts, butchers, commercial knife sharpeners, and housewives. ● The color of the soft Alcanthus whetstone is often white, gray and black, or pink and gray. ● It is the thinnest Alcanthus whetstone with the lowest specific gravity density. The whetstone has various mixed colors. ● Since it is cut from nature, you cannot specify the size, mesh, color, etc. Please choose from the product numbers.

  • magnet
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
JAM 【Diamond Grinding Stone】 DTL-2000/3000

JAM 【Diamond Grinding Stone】 DTL-2000/3000

Auxiliary tools for high-precision machining and measurement.

The material is SKS. Hardened to HRC60° and finished with grinding. ● Sign bars for angle setting and measurement ● Positioning auxiliary blocks suitable for both cutting and grinding processes ● Auxiliary dressers for shaping grinding wheel on grinding machines ● Grinding wheels for polishing and lapping of machine parts, mold parts, etc. ● This is a resin bond type diamond grinding wheel suitable for fitting, lapping, and fine edge rounding of mold parts and machine parts. Applicable materials: carbide, hardened steel, general steel, ceramics, glass, silicon, ferrite, porcelain, stone, concrete, carbon, gemstones, FRP.

  • Vice Clamps
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
JAM Diamond Grinding Stone Resin Bond Type DTL-3000

JAM Diamond Grinding Stone Resin Bond Type DTL-3000

Resin bond type developed for fitting, lapping, and fine edge rounding of mold parts and machine components.

[Applicable Materials] Tungsten carbide, hardened steel, general steel, ceramics, glass, silicon, ferrite, porcelain, stone, carbon, gemstones, FRP, etc. Note: This grinding stone cannot be used for high-speed rotation or sliding processing when mounted on a machine.

  • Vice Clamps
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Stainless Steel (SUS304) Connection Parts Development VE Proposal Tottori

Stainless Steel (SUS304) Connection Parts Development VE Proposal Tottori

If you're looking for stainless steel processing product development in Tottori, leave it to us! [Stainless Steel (SUS304) Connection Parts Development VE Proposal Tottori]

【Lot】 1-1000 【Details】 This is a processed stainless steel product. When considering stainless steel parts, do you have any of the following concerns? - I don't know what processing method to use to manufacture the designed shape. - I want to reduce costs compared to conventional products, but I don't want to compromise on quality. - I want to consider the design shape, but I can't come up with any ideas. Our company has the following features. ≪Matsui Manufacturing's Features≫ 1. Know-how and Ideas We have numerous achievements with major manufacturers across various industries (medical, kitchen, semiconductor, air conditioning, gas equipment, etc.)! Based on the insights gained from each industry, we will propose part shapes and processing methods! 2. Abundant Methods We possess a wide range of processing technologies that allow for consistent production! (Hot forging, cutting, brazing, bending, assembly, leak testing) 3. Speed Our sales department includes members who have experience in design and processing, enabling us to provide quick and appropriate responses to your requests! For more details, please visit our company website!

  • 大阪工場3.PNG
  • valve
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Stainless Steel (SUS304) Connection Parts Development VE Proposal Kansai

Stainless Steel (SUS304) Connection Parts Development VE Proposal Kansai

If you need development of stainless steel processed products in Kansai, leave it to us! 【Stainless Steel (SUS304) Connection Parts Development VE Proposal Kansai】

【Lot】 1-1000 【Details】 This is a processed stainless steel product. When considering stainless steel parts, do you have any of the following concerns? - I don't know what processing method to use to manufacture the designed shape. - I want to reduce costs compared to conventional products, but I don't want to compromise on quality. - I want to consider the design shape, but I can't come up with any ideas. Our company has the following features. ≪Matsui Manufacturing's Features≫ 1. Know-how and Ideas We have numerous achievements with major manufacturers across various industries (medical, kitchen, semiconductor, air conditioning, gas equipment, etc.)! Based on the insights gained from each industry, we will propose part shapes and processing methods! 2. Abundant Methods We possess a wide range of processing technologies that allow for consistent production! (Hot forging, cutting, brazing, bending, assembly, leak testing) 3. Speed Our sales department includes members who have experience in design and processing, enabling us to provide quick and appropriate responses to your requests! For more details, please visit our company website!

  • 大阪工場3.PNG
  • valve
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Stainless Steel (SUS304) Connection Parts Development VE Proposal China

Stainless Steel (SUS304) Connection Parts Development VE Proposal China

Leave the development of stainless steel processed products in China to us! 【Stainless Steel (SUS304) Connection Parts Development VE Proposal China】

【Lot】 1–1000 【Details】 This is a processed stainless steel product. When considering stainless steel components, do you have any of the following concerns? - I don't know what processing method to use to manufacture the designed shape. - I want to reduce costs compared to conventional products, but I don't want to compromise on quality. - I want to consider the design shape, but I can't come up with any ideas. Our company has the following features: ≪Matsui Manufacturing's Features≫ 1. Know-how and Ideas We have numerous achievements with major manufacturers across various industries (medical, kitchen, semiconductor, air conditioning, gas equipment, etc.)! Based on the insights gained from each industry, we will propose part shapes and processing methods! 2. Abundant Methods We possess a wide range of processing technologies that allow for consistent production! (Hot forging, machining, brazing, bending, assembly, leak testing) 3. Speed Our sales department includes members who have experience in design and processing, allowing us to provide quick and appropriate responses to your requests! For more details, please visit our company website!

  • 大阪工場3.PNG
  • valve
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Stainless Steel (SUS430) Connection Parts Development VE Proposal Osaka

Stainless Steel (SUS430) Connection Parts Development VE Proposal Osaka

If you need development of stainless steel processed products in Osaka, leave it to us! [Stainless Steel (SUS430) Connection Parts Development VE Proposal Osaka]

【Lot】 1-1000 【Details】 This is a processed stainless steel product. When considering stainless steel parts, do you have any of the following concerns? - I don't know what processing method to use to manufacture the designed shape. - I want to reduce costs compared to conventional products, but I don't want to compromise on quality. - I want to consider the design shape, but I can't come up with any ideas. Our company has the following features. ≪Matsui Manufacturing's Features≫ 1. Know-how and Ideas We have numerous achievements with major manufacturers across various industries (medical, kitchen, semiconductor, air conditioning, gas equipment, etc.)! Based on the insights gained from each industry, we will propose part shapes and processing methods! 2. Abundant Methods We possess a wide range of processing technologies that allow for consistent production! (Hot forging, cutting processing, brazing, bending processing, assembly, leak testing) 3. Speed Our sales department includes members who have experience in design and processing, enabling us to provide quick and appropriate responses to your requests! For more details, please visit our company website!

  • 大阪工場3.PNG
  • valve
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Stainless Steel (SUS430) Connection Parts Development VE Proposal Kansai

Stainless Steel (SUS430) Connection Parts Development VE Proposal Kansai

If you need development of stainless steel products in the Kansai region, leave it to us! 【Stainless Steel (SUS430) Connection Parts Development VE Proposal Kansai】

【Lot】 1-1000 【Details】 This is a processed stainless steel product. When considering stainless steel parts, do you have any of the following concerns? - I don't know what processing method to use to manufacture the designed shape. - I want to reduce costs compared to conventional products, but I don't want to compromise on quality. - I want to consider the design shape, but I can't come up with any ideas. Our company has the following features. ≪Matsui Manufacturing's Features≫ 1. Know-how and Ideas We have numerous achievements with major manufacturers in various industries (medical, kitchen, semiconductor, air conditioning, gas equipment, etc.)! Based on the insights gained from each industry, we will propose part shapes and processing methods! 2. Abundant Methods We possess a wide range of processing technologies that allow for consistent production! (Hot forging, cutting processing, brazing, bending processing, assembly, leak testing) 3. Speed Our sales department includes members who have experience in design and processing, allowing us to provide quick and appropriate responses to your requests! For more details, please visit our company website!

  • 大阪工場3.PNG
  • valve
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Stainless Steel (SUS430) Connection Parts Development VE Proposal China

Stainless Steel (SUS430) Connection Parts Development VE Proposal China

Leave the development of stainless steel processed products in China to us! 【Stainless Steel (SUS430) Connection Parts Development VE Proposal China】

【Lot】 1-1000 【Details】 This is a processed stainless steel product. When considering stainless steel parts, do you have any of the following concerns? - I don't know what processing method to use to manufacture the designed shape. - I want to reduce costs compared to conventional products, but I don't want to compromise on quality. - I want to consider the design shape, but I can't come up with any ideas. Our company has the following features. ≪Matsui Manufacturing's Features≫ 1. Know-how and Ideas We have numerous achievements with major manufacturers from various industries (medical, kitchen, semiconductor, air conditioning, gas equipment, etc.)! Based on the insights gained from each industry, we will propose part shapes and processing methods! 2. Abundant Methods We possess a wide range of processing technologies that allow for consistent production! (Hot forging, cutting, brazing, bending, assembly, leak testing) 3. Speed Our sales department includes members who have experience in design and processing, allowing us to provide quick and appropriate responses to your requests! For more details, please visit our company website!

  • 大阪工場3.PNG
  • valve
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Stainless Steel (SUS304) Connection Parts Development VE Proposal Osaka

Stainless Steel (SUS304) Connection Parts Development VE Proposal Osaka

Leave the development of stainless steel processed products to us in Osaka! [Stainless Steel (SUS304) Connection Parts Development VE Proposal Osaka]

【Lot】 1-1000 【Details】 This is a processed stainless steel product. When considering stainless steel parts, do you have any of the following concerns? - I don't know what processing method to use to manufacture the designed shape. - I want to reduce costs compared to conventional products, but I don't want to compromise on quality. - I want to consider the design shape, but I can't come up with any ideas. Our company has the following features. ≪Matsui Manufacturing's Features≫ 1. Know-how and Ideas We have numerous achievements with major manufacturers across various industries (medical, kitchen, semiconductor, air conditioning, gas equipment, etc.)! Based on the insights gained from each industry, we will propose part shapes and processing methods! 2. Abundant Methods We possess a wide range of processing technologies that allow for consistent production! (Hot forging, cutting, brazing, bending, assembly, leak testing) 3. Speed Our sales department includes members who have experience in design and processing, enabling us to provide prompt and appropriate responses to your requests! For more details, please visit our company website!

  • 大阪工場3.PNG
  • valve
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Stainless Steel (SUS430) Connection Parts Development VE Proposal Tottori

Stainless Steel (SUS430) Connection Parts Development VE Proposal Tottori

If you need development of stainless steel products in Tottori, leave it to us! [Stainless Steel (SUS430) Connection Parts Development VE Proposal Tottori]

【Lot】 1-1000 【Details】 This is a processed stainless steel product. When considering stainless steel parts, do you have any of the following concerns? - I don't know what processing method to use to manufacture the designed shape. - I want to reduce costs compared to conventional products, but I don't want to compromise on quality. - I want to consider the design shape, but I can't come up with any ideas. Our company has the following features. ≪Matsui Manufacturing's Features≫ 1. Know-how and Ideas We have numerous achievements with major manufacturers across various industries (medical, kitchen, semiconductor, air conditioning, gas equipment, etc.)! Based on the insights gained from each industry, we will propose part shapes and processing methods! 2. Abundant Methods We possess a wide range of processing technologies that allow for consistent production! (Hot forging, cutting processing, brazing, bending processing, assembly, leak testing) 3. Speed Our sales department includes members who have experience in design and processing, allowing us to provide quick and appropriate responses to your requests! For more details, please visit our company website!

  • 大阪工場3.PNG
  • valve
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Grindstone

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.