We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Grindstone.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Grindstone(500) - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.

Grindstone Product List

31～60 item / All 74 items

Displayed results
Introduction of the mold grinding stone "YHB" - Samples available.

Introduction of the mold grinding stone "YHB" - Samples available.

Suitable for dry use.

The product we would like to introduce from our main product line of mold grinding wheels is the "YHB." The "YHB" is a ceramic grinding wheel for rough to medium finishing, which is impregnated with general-purpose phenolic resin on a WA grinding wheel. Due to its high resin strength, it is less likely to break under heavy loads during grinding, such as rib polishing, and it experiences less wear even when grinding rough surfaces. It is suitable for cases where a dry-use option is needed. The hardness of the grinding wheel is of type "I." We are currently offering free samples, so please feel free to contact us for more details!! ↓↓↓ ---------------------------------- Yamato Grinding Wheel Co., Ltd. Sales Department 5-1613 Hata, Kashiba City, Nara Prefecture 639-0245 TEL: 0745-77-2955 FAX: 0745-78-0667 Email: yamato@yamatoseito.co.jp URL: http://www.yamatoseito.co.jp

  • Grindstone
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Introduction of the mold grinding stone "YHB-T" - Samples available.

Introduction of the mold grinding stone "YHB-T" - Samples available.

The mold grinding stone with the highest strength in the YH series.

The product we would like to introduce from our main product line of mold grinding wheels is the 'YHB-T'. This is a ceramic grinding wheel for rough to medium finishing, which is impregnated with high-fracture-resistance phenolic resin in WA grinding wheels, and it is the strongest product in the YH series. It provides a smooth finish when cutting and removing the altered layer of materials after machining or electrical discharge machining, especially when surface roughness is a priority. Additionally, due to its strength, it is less likely to break during roughing operations under load or when working with small-sized grinding wheels. However, it tends to clog easily in dry conditions, so please use it wet. We recommend "BLUE CUT" from our company. The hardness of the grinding wheels comes in three types: "L" (hard), "J" (medium), and "H" (soft). Currently, we are offering free samples, so please feel free to contact us for more details!! ↓↓↓

  • Grindstone
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Introduction of the mold grinding stone "YHZ" - Samples available.

Introduction of the mold grinding stone "YHZ" - Samples available.

All-rounder in mold grinding

The product we would like to introduce from our main product line of mold grinding wheels is the 'YHZ'. The 'YHZ' is a ceramic grinding wheel developed for semi-finishing and finishing applications. While the grinding wheel does wear slightly, it exhibits outstanding grinding performance. It is an all-rounder that can be adapted to all types of mold steel, regardless of whether dry or wet grinding is used. It also has good compatibility with both oil-based and water-soluble oils, and it is environmentally friendly, containing no harmful substances to humans or the environment. The hardness of the grinding wheel comes in two types: "L" (hard) and "J" (soft). Currently, we are offering free samples, so please feel free to contact us for more details!! ↓↓↓ ---------------------------------- Yamato Seito Co., Ltd. Sales Department 5-1613 Hata, Kashiba City, Nara Prefecture 639-0245 TEL: 0745-77-2955 FAX: 0745-78-0667 Email: yamato@yamatoseito.co.jp URL: http://www.yamatoseito.co.jp

  • Grindstone
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Precision Cutting Wheel "Japan Disc Resin Bond Cutting Wheel"

Precision Cutting Wheel "Japan Disc Resin Bond Cutting Wheel"

A stunning cut surface! This cutting wheel is ideal for fine cutting of difficult-to-machine materials.

The "Japanese Disc Resin Cutting Wheel" is manufactured using a special process and can be used dry, but it particularly demonstrates excellent performance when used wet. The thickness accuracy is exceptionally high, and it is especially effective when used in conjunction with the precision automatic cutting machines from Japanese Disc Industry. It is highly recommended for precise and fine cutting of difficult-to-cut materials. 【Features】 - A thin cutting wheel capable of cutting various metal pipes and solid materials with high precision and good cutting surfaces. → Various metals: iron, SUS, tungsten, molybdenum, Inconel, etc. - No clogging or burning, resulting in good cutting surfaces. - Excellent cutting performance allows for high cutting precision. - Cutting wheels are indispensable for cutting items such as syringes, industrial pipes, and electronic components. For more details, please contact us or download the catalog.

  • Grindstone
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-grade sharpening stone "Futakamito / Alcanthus Stone"

High-grade sharpening stone "Futakamito / Alcanthus Stone"

Custom dimensions tailored to your needs are also available! Suitable for sharpening tools and precision grinding, among other uses.

We would like to introduce our high-quality sharpening stones. The "Futakamito" is recommended for those who are struggling with issues such as "recently, it has become difficult to obtain good quality natural sharpening stones for knife sharpening" and "I don't know which precision grinding stone to use by hand." The "Arkansas Stone" is a natural sharpening stone sourced from Arkansas, USA, and is used for sharpening knives and precision grinding. [Features] <Futakamito> ■ Custom sizes available to suit your needs - Grit #2000: Medium finish (100×25×13, 4 inches) - Grit #4000: Finish (150×50×25, 6 inches) - Grit #6000: Precision finish (205×50×25, 8 inches) - Grit #8000: Final finish (205×75×25, for knives) *For more details, please refer to the PDF document or feel free to contact us.

  • Grindstone
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Introduction of the mold grinding stone "YHS" - Samples available.

Introduction of the mold grinding stone "YHS" - Samples available.

It has a strong retention of sulfur intensity, is difficult to break, and has excellent workability.

The product we would like to introduce from our main product line of mold grinding stones is the product called "YHS." This is a grinding stone that has sulfur impregnated into a WA grinding stone. By adhering sulfur to the pore walls of the grinding stone, it can prevent grinding marks on molds. It has a moderate strength retention of sulfur, making it less likely to break and excellent in workability. Additionally, the lubricating effect of sulfur improves the surface roughness of the mold and significantly reduces the wear of the grinding stone. The hardness of the grinding stone is of type "I." (Note) As it is a flammable solid, please ensure that the grinding stone is dried naturally. It may cause a fire. Currently, we are offering free samples, so please feel free to contact us for more details!! ↓↓↓ ---------------------------------- Yamato Seito Co., Ltd. Sales Department 5-1613 Hata, Kashiba City, Nara Prefecture 639-0245 TEL: 0745-77-2955 FAX: 0745-78-0667 Email: yamato@yamatoseito.co.jp URL: http://www.yamatoseito.co.jp

  • cutter
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Finishing Disc Grinder Set DS-1 Grinder Rubber Grinding Stone

Finishing Disc Grinder Set DS-1 Grinder Rubber Grinding Stone

Basic set for trying out the Serapozisuku: Finishing Disc Grinder Set DS-1

Usage Deburring, removing fine scratches, rust removal Removing welding discoloration, polishing before mirror finishing Features Suitable for various materials Iron, stainless steel, aluminum, copper, brass, stone, etc. [Set Contents] Finishing disc grinder TS100-V (5500 RPM) 1 unit Ceramic polishing disc D80 #80 1 piece D120 #120 1 piece D220 #220 1 piece

  • Other abrasives
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Super finishing stone "K-MAX Series"

Super finishing stone "K-MAX Series"

Line up the stick compo! Please use it specifically for grinding work before the mirror finish of the mold.

The "K-MAX Series" is a super finishing grinding stone suitable for pre-lapping processes, such as diamond paste. By using carefully selected new alumina abrasive grains and a specially manufactured bond designed for ultra-fine particles, we have achieved a high-grit super finishing grinding stone. Despite its high grit, it offers excellent cutting performance, minimal clogging, and good adaptability, with fewer instances of scratches and superior durability. 【Features】 ■ Uses carefully selected new alumina abrasive grains ■ Employs a specially manufactured bond designed for ultra-fine particles ■ Achieves a high-grit super finishing grinding stone ■ Excellent cutting performance, minimal clogging, and good adaptability ■ Fewer instances of scratches and superior durability *For more details, please refer to the PDF document or feel free to contact us.

  • 2022-11-22_13h51_51.png
  • Grindstone
  • Other abrasives
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mini cup whetstone

Mini cup whetstone

Small parts and mini cups for narrow areas.

Usage MP24… removing black skin, rust removal, paint stripping MT80… light grinding, bead removal, paint stripping MT180… light grinding, fine grinding, chamfering, deburring MT240… fine chamfering, fine deburring MD120… fine chamfering, polishing finish, removing discoloration from welds Special Features Please use with grinders equipped with mini cup-specific fittings (MS-50E, MS50A-2).

  • Grindstone
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Yamabuki - High Grade Oil Stone -

Yamabuki - High Grade Oil Stone -

Successfully developed high-precision grinding wheels that can be supplied at a low cost and with stable availability!!

Generally, there are few artificial grinding stones used for high-precision grinding in manual polishing work, and natural stones such as Arkansas stones are sometimes used. Natural stones are difficult to obtain, expensive, and in recent years, high-quality ones have become harder to find, with fewer imports. Therefore, our company has been working on the development of high-precision grinding stones that can be supplied at a low cost and in a stable manner. The new product "Yamabuki" uses tough alumina-based abrasive grains, has a particle size equivalent to #6000, and is a groundbreaking product that has wax impregnated into a vitrified bond stone that has been fired at high temperatures. (Note) Due to being a flammable solid, please ensure that the grinding stone is dried naturally. It may cause a fire.

  • Grindstone
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【システム非公開】キング砥石　キング仕上砥　F-1型 #4000

【システム非公開】キング砥石　キング仕上砥　F-1型 #4000

特殊砥材にて製作されていますので短時間で、切れ味が冴えるするどい刃が付き、作業の能率を高めます。

当社で運営する会員限定の卸売(仕入れ)サイト「Kenko卸.com」では、 「キング砥石　キング仕上砥　F-1型 #4000」を取り扱っております。 特殊砥材にて製作されていますので短時間で、切れ味が冴えるするどい刃が付き、作業の能率を高めます。

  • others
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Battery-powered rail grinder "RS-1"

Battery-powered rail grinder "RS-1"

The main body can be folded compactly, and all the equipment can be loaded into a single light van!

The "RS-1" is a rail grinding machine that uses a lithium-ion battery. The main body can be compactly folded, allowing the entire device to be loaded into a single light van. Additionally, the special grinding material "3B series" consists of grinding material cut into strips and embedded in the wheel. It exhibits excellent cutting performance and durability. The cushioning properties of the grinding material allow for grinding without damaging the shape of the rail's top surface. We have rental machines available, so please contact us for more details. 【Specifications】 ■ Main body structure: Aluminum frame welded structure ■ Wheel material: MC nylon, steel ■ Drive motor: AC servo motor, 200V-1.5KW ■ Rotational speed: 4500rpm ■ Power supply: Lithium-ion battery 50V20A, capable of approximately 2 hours of grinding ■ Grinding amount: 0.02mm ■ Grinding wheel: 142×65 with R ■ Overall length: 863mm (stored: 760mm) ■ Overall width: 326mm ■ Overall height: 946mm (stored: 470mm) ■ Weight ・Device: 20kg ・Battery: 16kg *For more details, please refer to the PDF document or feel free to contact us.

  • Other abrasives
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【システム非公開】キング砥石　キングデラックス　NO.2000（

【システム非公開】キング砥石　キングデラックス　NO.2000（

研削研磨用品　砥石　

当社で運営する会員限定の卸売(仕入れ)サイト「Kenko卸.com」では、 「キング砥石　キングデラックス　NO.2000（標準型）　207ｘ66ｘ34」を取り扱っております。 あらゆる刃物の中研ぎ用砥石として開発された品です。 特殊砥材にて製作されていますので品質は永久不変です。 短時間で切れ味が冴えるするどい刃が付き、作業の能率を高めます。 かんな・のみ・包丁・ハサミ・ナイフ、その他精密刃物用。 -------------- 【関連ワード】 キッチングッズ --------------

  • others
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
7mm thick grinding wheel Black Seven

7mm thick grinding wheel Black Seven

The amount of waste is 20% off compared to conventional methods. The newly developed manufacturing process increases durability by over 150%.

We have successfully amplified the grindable area and reduced the waste amount by approximately 20% compared to conventional methods through the new design of the non-grindable (waste) parts. The hassle of replacing grinding wheels has also been reduced, enhancing work efficiency while considering the environment. Additionally, through a newly developed manufacturing method, we have formed a special shape with a thickness of 7mm, significantly improving durability. We have achieved over 150% increase in durability compared to the conventional product with a thickness of 6mm. For more details, please contact us or refer to the catalog.

  • Grindstone
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
HASHIMOTO GC Grinding Stone

HASHIMOTO GC Grinding Stone

The cutting force is very high! It is also characterized by being resistant to galling and scratching.

This product is a grinding wheel that uses green silicon carbide as the abrasive. Due to its very high cutting power, it cannot be used on steel materials with a hardness of HRC40 or lower, as it will cause deep scratches. It is also characterized by being resistant to gouging and scratching. Additionally, by using water-soluble grinding wheel oil, the occurrence of gouging and scratching is further reduced. 【Features】 ■ The abrasive of the grinding wheel uses green silicon carbide ■ As a general abrasive, it has excellent cutting performance with hard abrasives ■ It is preferable to use it on steel materials with a hardness of HRC40 or higher ■ The use of water-soluble grinding wheel oil further reduces the occurrence of gouging and scratching *For more details, please refer to the PDF document or feel free to contact us.

  • Grindstone
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
HASHIMOTO C whetstone

HASHIMOTO C whetstone

To enable the polishing of relatively low-hardness steel materials, high-quality black silicon carbide was used.

This product is a grinding wheel developed to facilitate the upgrading of grit size for pre-hardened steel materials with a hardness of HRC 40 or lower. To enable the grinding of relatively low-hardness steel materials, high-quality black silicon carbide with uniform particle size is used as the abrasive. It has excellent toughness and moderate cutting power. It is preferable to use this product on steel materials with a hardness of HRC 40 or lower. 【Features】 - Developed to facilitate grit size upgrading for pre-hardened steel materials with a hardness of HRC 40 or lower - Excellent toughness and moderate cutting power - Preferably used on steel materials with a hardness of HRC 40 or lower *For more details, please refer to the PDF document or feel free to contact us.

  • Grindstone
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Resinoid Grinding Stone Series "Resinoid Mounted Stone Shaft Diameter φ3/6mm"

Resinoid Grinding Stone Series "Resinoid Mounted Stone Shaft Diameter φ3/6mm"

The SGW resin-bonded grinding wheel series that excels on the front lines of every processing site!

The "Resinoid Mounted Grinding Wheel" has moderate elasticity due to its phenolic resin binder, resulting in minimal rebound during cutting, making it user-friendly for operators. Its sharp cutting ability is a key feature, with reduced clogging, allowing for maximum work efficiency. 【Features】 ■ Active in various processing sites ■ Minimal clogging ■ Improved work efficiency ■ Moderate elasticity due to phenolic binder ■ Minimal rebound during cutting *For more details, please refer to the catalog or feel free to contact us.

  • Grindstone
  • Other abrasives
  • Other cutting tools
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Super Stent Trimmer

Super Stent Trimmer

Just a light stroke for a perfect finish - a deburring stone using super abrasive particles.

This is a deburring grinding stone that can be directly attached and used with a disc grinder or air sander. It uses super abrasives, providing excellent cutting performance and a smooth finish with minimal secondary burrs. Since it can achieve a finish in one go, it reduces processing time and significantly improves work efficiency!

  • Grindstone
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Whetstone "Chamfering (Outer Edge) Wheel"

Whetstone "Chamfering (Outer Edge) Wheel"

Achieve high precision and high efficiency processing! Introducing grinding wheels that use metal bond as the binder.

The "Chamfering (Outer Circumference) Wheel" is a grinding wheel for chamfering silicon wafers. It uses a metal bond as the binder, achieving high precision and high efficiency processing. It accommodates various specifications such as V shapes, R shapes, single grooves, and continuous grooves. We have processing examples with a particle size of #800, a wheel peripheral speed of 2500 m/min, and a surface roughness (Ra) of 0.3 μm. Please feel free to contact us when you need assistance. 【Features】 ■ For chamfering processing of silicon wafers ■ Uses metal bond as the binder ■ Achieves high precision and high efficiency processing ■ Accommodates various shapes, single grooves, continuous grooves, and rough/finish integrated types *For more details, please refer to the PDF document or feel free to contact us.

  • Grindstone
  • Other cutting tools
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Electroplated CBN grinding wheel for woodworking tools

Electroplated CBN grinding wheel for woodworking tools

High-speed and cool cutting is possible without coolant.

CBN (cubic boron nitride) grinding wheels are used for sharpening woodworking tools (high-speed steel HSS). They are used on bench grinders.

  • Grindstone
  • Power tools
  • wood
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Notch wheel

Notch wheel

Harmony and challenge. By utilizing high-precision groove processing and finishing techniques, we accommodate various wafer shapes.

We would like to introduce our "Notch Wheel." This product minimizes processing damage through a uniform fine abrasive layer structure and employs a bond with high wear resistance and abrasive retention. It achieves long life with high shape retention. Thanks to high-precision groove processing and finishing technology, it accommodates various wafer shapes. [Features] - Minimizes processing damage and achieves wear resistance through a uniform fine abrasive layer structure - Employs a bond with high abrasive retention - Achieves long life with high shape retention - Accommodates various wafer shapes through high-precision groove processing and finishing technology *For more details, please refer to the PDF document or feel free to contact us.

  • Other cutting tools
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Glass Cross Disk "Spider Net SPN"

Glass Cross Disk "Spider Net SPN"

Keep a flat polish.

"Spider Net" is a glass cloth disc suitable for flat grinding. 【Features】 ■ Maintains shape during continuous grinding, allowing for sustained surface grinding ■ Enables burn removal and flat finishing without digging into steel materials ■ Can grind in pinpoint or wide areas with two types of pads ■ Easy to attach and detach! *For more details, please refer to the PDF document or feel free to contact us.

  • Grindstone
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Heiwa Technica Co., Ltd. "Precision Cutting Wheels" Comprehensive Catalog

Heiwa Technica Co., Ltd. "Precision Cutting Wheels" Comprehensive Catalog

We have a wide range of cutting wheels available!

Processing with precision cutting wheels involves the use of high-speed rotating cutting wheels that are extremely thin (0.3mm to 1.2mm). This method is a type of precision machining that gradually shaves the workpiece using very hard particles (grains) that make up the wheel. It acts softly without causing destructive damage to the workpiece, resulting in a good surface finish, sharp cutting performance, and excellent grinding capabilities, boasting high-speed cutting that contributes to the reduction or elimination of secondary processing, thus lowering costs. The Precision Cutting Wheel Tokuwu Stone Series is manufactured under strict quality control in the Nasu factory, located in Nasu Town, Tochigi Prefecture, where temperature and humidity are kept constant to maintain stable quality on the production line. The Diamond Cutting Wheel Naston Gold Series for hard and brittle materials is a developed product made using high-quality diamond grains and a unique resin. It demonstrates its power in cutting hard and brittle materials such as cemented carbide, ceramics, hard glass, and sapphire glass, as well as difficult-to-machine composite materials, which are challenging to cut with general cutting wheels.

  • Grindstone
  • Other machine tools
  • Other physicochemical equipment
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Rejibon Mini Disc "MD-58"

Rejibon Mini Disc "MD-58"

We offer granularity of 60, 80, 100, 120, and 240! Use the top, bottom, and sides to improve work efficiency!

The "MD-58" is a mini flap disc for the Redibon air grinder. By enabling grinding and polishing on the top, bottom, and sides, it improves work efficiency. With a compact outer diameter of 58mm, it is suitable for small burr removal, chamfering, and finishing, and can grind into narrow areas. 【Features】 ■ 3WAY DISC (top, bottom, side) ■ Improved work efficiency ■ Compact and capable of grinding in narrow areas ■ Size (outer diameter × hole diameter): 58×9.6 ■ Maximum operating speed: 19,750 min-1 *For more details, please refer to the PDF document or feel free to contact us.

  • Other abrasives
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Offset Type Elastic Grinding Wheel "Σ (Sigma) Jade"

Offset Type Elastic Grinding Wheel "Σ (Sigma) Jade"

Moderate flexibility alleviates noise and vibration, allowing for comfortable work over long periods!

"Σ (Sigma) Jade" is an offset-type elastic grinding wheel that achieves a significant reduction in work time with its astonishing grinding speed. It is a flexible grinding wheel that combines grinding power superior to that of offset wheels with flexibility, allowing for stress-free grinding. Additionally, its moderate flexibility reduces noise and vibration, making it easy to work for extended periods. 【Features】 ■ Achieves a significant reduction in work time with astonishing grinding speed ■ Demonstrates high grinding performance with light force ■ Considerate of users *For more details, please download the PDF or feel free to contact us.

  • Grindstone
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ibaraki Grinding Co., Ltd. Business Introduction

Ibaraki Grinding Co., Ltd. Business Introduction

A grinding wheel manufacturer specializing in ultra-thin cutting wheels and electroplated tools!

Ibaraki Seito Co., Ltd. handles ultra-thin cutting wheels and electroplated tools. We offer ultra-thin cutting wheels suitable for precision cutting of metals, glass, ceramics, and more, including diamond and CBN ultra-thin cutting wheels for carbide and ceramics that provide the highest cutting performance and overwhelming long life, as well as diamond and CBN electroplated wheels. We manufacture according to the specifications of cutting machines, so please feel free to contact us with your requests. 【Features】 ■ Confidence in cutting performance, thinness, and strength ■ Wide range of sizes available ■ Compatible with various applications and shapes in grinding processes ■ Achieves high precision and high efficiency processing of difficult-to-cut materials at low cost *For more details, please download the PDF or feel free to contact us.

  • Grindstone
  • Other cutting tools
  • Power tools
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ceramic composite cutting wheel

Ceramic composite cutting wheel

A ceramic composite cutting wheel born in Germany.

This is a cutting wheel used for electric disc grinders. It is made from four elements: abrasive grains, bonding agents, pores, and ceramics, achieving an unprecedented long lifespan. - The grain size is #46, which is equivalent to standard cutting wheels. - The hardness is #S, making it softer than standard cutting wheels (being too hard tends to increase the likelihood of clogging and blinding). - The type and classification of the artificial grinding material is #A (brown alumina grinding material). It is ideal for cutting metals such as general steel, cast iron, stainless steel, and carbon steel. Feedback from users indicates that cutting non-metals like mortar and stone was smooth.

  • Grindstone
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Spring Grinding Machine Series

Spring Grinding Machine Series

Taihei's spring research series continues to lead the industry.

A fulfilling lineup! Simple yet robust construction. Achieving high precision at a low cost. Taihei's spring manufacturing guarantees stable quality and high productivity.

  • Grinding Machine
  • Other processing machines
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
"Prepreg" sample giveaway

"Prepreg" sample giveaway

We will prototype the prepreg according to your desired specifications.

We design prepregs to meet customer needs and support everything from prototyping to mass production. Reasons why our prepregs are chosen: 1. We can manufacture prepregs with a maximum width of 1,600 mm. 2. Prototyping and mass production are possible with supplied materials. 3. Mass production can start from 50 meters. 4. Delivery can be made in as little as 2 weeks after order confirmation. 5. We can handle a variety of materials, both domestically and internationally. *If you would like a sample, please feel free to contact us.

  • Processing Contract
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Translucent Hard Alcanthas (Extra Fine) TAB-82-C

Translucent Hard Alcanthas (Extra Fine) TAB-82-C

Translucent hard Arkansas whetstones are classified as genuine hard Arkansas whetstones according to specific grading based on specific gravity testing.

●The distinction between Black Hard and Translucent Hard within this genuine Hard Arkansas whetstone is simply based on customer preference. ●The Translucent Hard Arkansas whetstone appears uniform and shows translucent shades of gray, white, yellow, brown, and occasionally pink. Although it is called translucent, it is actually closer to an opaque white color. ●Due to being quarried from nature, we cannot accommodate specific requests for size, mesh, color, etc. Please choose from the item numbers.

  • byte
  • Grindstone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Grindstone

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.