Inspection Systems Product List and Ranking from 289 Manufacturers, Suppliers and Companies

CAD Network Comparison Software TsNetChangeEX (Limited Function Version)

This TsNetChangeEX (limited version with comparison function) automatically checks the consistency between networks.

Even if the circuit diagram CAD is in a state where it can output nets, it is not a problem if the net format has complete compatibility between the circuit design CAD and the board design CAD. However, if that is not the case, the issue that arises is the consistency of the nets.

Company：タイシン
Price：10,000 yen-100,000 yen

Other embedded systems (software and hardware)
Inspection Systems

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Visualizing residual proteins in the facility! "Pro Reveal"

Visualizing "invisible dirt" after cleaning! A world-first technology that ensures reliable cleanliness assurance.

Have you ever thought, "Is this really perfect?" regarding the reprocessing and cleanliness of medical instruments and equipment after washing? Especially with complex-shaped instruments and internal cavities, pathogenic residual proteins that cannot be seen with the naked eye may remain, which not only reduces the effectiveness of subsequent final processing but also poses a risk to patient safety. "ProReveal" is a groundbreaking system that can visualize pathogenic residual proteins after washing within the hospital for the first time in the world. This patented technology detects even minute proteins at the nanogram level within just 4 minutes by simply spraying a special fluorescent solution, accurately displaying their location and quantity in 3D visuals. This allows for the identification of difficult-to-clean areas and enables objective understanding and improvement of issues in the cleaning process. With ProReveal, based on the most reliable fluorescent inspection method in European research, why not dramatically enhance the "cleanliness guarantee" in your hospital's medical instrument reprocessing and achieve the highest level of medical safety?

Company：NCC
Price：1 million yen-5 million yen

Other protein analysis
Analytical Equipment
Analysis Equipment
Inspection Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

ImageLogger

Super easy, automatic image import tool. Just click while looking at the images!

●Image Logger is an area image automatic capture software that uses a micro-technica image input board. ●Images can be easily captured and saved with a mouse click while viewing the images. ●It is ideal for selecting cameras, testing lenses, adjusting proofs, and capturing images in real environments (such as production lines)!

Company：ネクストテクノロジー広島本社
Price：Other

Image analysis software
Inspection Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Automobile body tunnel-type paint defect inspection system

Eines Systems' tunnel-type paint defect inspection system "esφi," which has a proven track record with European, American, and Japanese automotive OEM manufacturers.

1. No need for safety measures due to the absence of moving parts The simple configuration of LED and fixed camera means there are no moving parts. Additional safety measures are unnecessary, and maintenance can be kept to a minimum. 2. Lightweight and space-saving The aluminum structure makes it lightweight. With dimensions of W3.6m × H3m × L3m, it is compact, allowing for flexible selection of installation locations. 3. No need to stop during automobile body inspection High-precision inspections are conducted using a unique algorithm, achieving high-speed inspections. It can accommodate high-speed takt lines, so there is no need to stop during inspections. 4. Compatible with all painting inspection processes: primer, intermediate, and topcoat A system that can be applied to all painting inspection processes, including electrodeposition, primer, intermediate, and topcoat. 5. Classification and analysis of painting defects are possible Defects such as spots and dents that can occur due to various factors in automobile production can be classified by type of painting defect, improving work efficiency in the repair process after inspection. This "classification and analysis of painting defects" function allows for feedback to high-quality upstream processes and could potentially link to an auto-repair system in the future.

Company：第一実業
Price：Other

Defect Inspection Equipment
Inspection Systems

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Automobile body tunnel-type gap, step, scratch, and dent inspection system.

The tunnel-type gap, step, scratch, and dent inspection system "eiφis" manufactured by Eines Systems, which has a proven track record with OEM manufacturers in Europe and the United States.

1. Easy to accommodate new models and additional measurement points Not only can we conduct comprehensive multi-point inspections, but we can also easily accommodate new models and additional measurement points. Furthermore, we can cover all materials, including not just sheet metal but also resin and glass, allowing one machine to cover all vehicle body measurement points. Additionally, by analyzing and providing feedback from inspection result data, we can improve quality management and enhance production processes. 2. No safety measures required due to the absence of drive components Our unique algorithm enables high-precision measurements while achieving high-speed inspections. Since it can accommodate high-speed takt lines, there is no need to stop during inspections. 3. No need to stop during automobile body inspections With a simple configuration of LED and fixed cameras, there are no drive components. This eliminates the need for additional safety measures and keeps maintenance to a minimum. 4. Capable of scratch and dent inspections By adding a tunnel to the tunnel-type gap and step inspection device, we can upgrade it to enable inspections for 1. scratches and dents on completed vehicles and 2. poke-yoke inspections for emblems and other components.

Company：第一実業
Price：Other

Defect Inspection Equipment
Inspection Systems

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Substrate Automatic Inspection System

Semi-automating the shipping inspection of mass-produced circuit boards.

Features - Probes can be connected to the inspection target board, allowing for inspection with simple operations on a computer. - Inspection procedures are programmed, eliminating the possibility of missing inspection items or making procedural errors. - Capable of complex inspections in conjunction with firmware on the board. - Voltage and frequency are automatically determined, while LED status is visually assessed. Main Functions - Execution of inspections for each inspection item - Continuous inspection of all items - Aging function to repeatedly execute selected items *For more details, please contact us.

Company：エヌ・ディ・アール
Price：Other

Circuit Board Inspection Equipment
Inspection Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Image Inspection System "Vision Systems"

Detects even the biting of seal parts that are not visible to the naked eye or camera!

"Vision systems" are image inspection systems that can handle both transparent films and printed films. Utilizing the differences in absorption and reflection characteristics of materials against the incident light, they detect seal part entrapments such as product pieces and drips. They also accommodate seal parts that are hidden by printed films. Additionally, we offer a lineup tailored to various applications, including onboard types and standalone types. 【Inspection Items】 ■ Seal part entrapment inspection (product pieces, drips, sauces, marinade liquids, etc.) ■ Label presence identification, position and orientation inspection ■ Print presence/character recognition (expiration dates, LOT numbers, etc.) ■ Barcode/QR code inspection *For more details, please download the PDF or feel free to contact us.

Other appearance and image inspection equipment
Inspection Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Lighted Small Microscope 100x 832

100x magnification microscope. It has a stand and a focus adjustment feature, so once you set the focus, you won't need to adjust it again for future use. Field of view: 1mm.

It is a small microscope with a light. The magnification is 100 times! It has various uses such as checking printed materials, inspecting fabrics, and examining cutting surfaces. It has a focus adjustment feature, so once you set the focus, you won't need to adjust it again for the next use. Field of view: approximately 1 mm.

Company：池田レンズ工業
Price：Less than 10,000 yen

Microscope
Inspection Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

60-100x Zoom Mini Microscope with LED Light 834

A compact microscope with an LED light that allows for 60 to 100 times zoom! Its compact size makes it convenient to carry. It features an inverted image type.

Please look through the eyepiece and adjust the focus. It is recommended to start with the lowest magnification of 60x. Please attach the acrylic part to the surface you want to observe and adjust the focus while looking through the eyepiece. *The shape of the acrylic part may vary slightly. The 831 is an inverted image type. The object will appear inverted.

Company：池田レンズ工業
Price：Less than 10,000 yen

Microscope
Inspection Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Wafer bump automatic inspection system 'RWi-300MK3'

Ideal for gold bump 3D inspection! Achieves simultaneous measurement of 3D/2D/SD with high speed and high precision.

We would like to introduce our high-speed, high-precision 3D/2D/SD wafer bump automatic inspection system, the 'RWi-300MK3'. The measurement accuracy for 2D/3D has significantly improved, enabling ultra-fast inspections. Additionally, the speed of defect image acquisition has dramatically increased. Please feel free to contact us if you require further information. 【Features】 ■ Simultaneous measurement of 3D/2D/SD achieved with high speed and high precision ■ Suitable for gold bump 3D inspection ■ Diverse transport systems *For more details, please download the PDF or feel free to contact us.

Company：ニデックアドバンステクノロジー本社、東京営業所、名古屋営業所
Price：Other

Other inspection equipment and devices
Inspection Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Robust estimation computing software

Are you satisfied with the average result?

This software allows you to try and verify the robust estimation calculations implemented in our numerical computation library (eyemLib library) through a GUI. At the same time, the least squares method is also calculated, making it easy to compare with the robust estimation. Input data can be easily calculated by simply copying and pasting from Excel data or other sources that you already have. Please give it a try.

Company：アイディール
Price：Less than 10,000 yen

Image Processing Software
Other measurement, recording and measuring instruments
Inspection Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Multi-Control System

Remote inspection of multiple lines! Distributing the load to reduce labor costs!

When introducing a visual inspection device, it is usually necessary to have one inspector per device. The direct inspection rates and the time required for inspecting a single item vary depending on the inspection line and model. The "Multi-Control System" (patented) was developed with the idea of reducing inspectors' waiting time and distributing the workload. By allowing one inspector to conduct visual inspections across multiple inspection lines without being assigned to a specific line, it is expected to improve the work efficiency of inspectors and reduce labor costs. The "Multi-Control System" conducts inspections using remote terminals, so there is no need to be in front of the inspection machine. Inspections can be performed in real-time via remote control. 【Features】 ■ Increases work efficiency and reduces labor costs ■ Displays defective areas detected by the visual inspection device in video format, allowing the camera to be adjusted to a more visible angle during inspection ■ When focusing on areas other than defects detected by AOI, photos are taken when the board flows from AOI to Neoview, and inspections are conducted based on those images *For more details, please refer to the PDF document or feel free to contact us.

Company：日立技研
Price：Other

Defect Inspection Equipment
Remote Control
Other security and surveillance systems
Inspection Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Scanner-type inspection device "EI-Scan"

Ultra high-definition clear images with a single A4 size scan! Image inspection software applicable to various inspections.

The "EYE-I Scan" is a system that captures images using a high-resolution scanner and performs image inspection. The image resolution is approximately 21 microns. It scans and inspects an A4-sized area at an overwhelming high resolution of 9700×13500 pixels (420 times the pixel count of VGA size). 【Features】 ■ Inspection possible with over 10 times the pixel count of high-resolution area cameras (130 million pixels) ■ High-resolution inspections that previously required segmented shooting can now be done in a single scan ■ Stable lighting conditions unique to scanners *For more details, please refer to the PDF document or feel free to contact us.

Company：スカイロジック
Price：500,000 yen-1 million yen

Image Processing Software
Inspection Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[AI Use Case] Detecting tablet defects and stopping the conveyor.

A simple system that continuously inspects the conveyor with a fixed-point camera to "prevent defective products from flowing further ahead"!

We will introduce a system that detects broken tablets and stops the conveyor. It was found that using a mechanical relay to perform ON/OFF at 100V generates significant electromagnetic noise, so we switched to a solid-state relay for testing. We added a patrol light to the wiring for "ON/OFF of the 100V power supply from DeepSky," which alerts with a red light and buzzer when a broken tablet (defective product) flows through, stopping the conveyor. When good products continue to flow, a green light is illuminated, and the conveyor keeps moving. For more details, please check the related links below. 【Tools and Equipment】 ■ PC: Mouse Computer/G-Tune, Core i9, 16GB RAM, RTX 2070 SUPER ■ Image Processing Software: Sky Logic/DeepSky DS100K ■ IO Unit: Sky Logic/EI-ITIO-T01 ■ 1.3 Megapixel Camera: Daheng/MER-133-54u3c ■ 25mm Lens: M2514-MP2 ■ Camera Stand (Aluminum Frame) *For more details, please refer to the PDF document or feel free to contact us.

Company：スカイロジック
Price：Other

Image Processing Software
Inspection Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

36 million pixel inspection system "FX Capture"

Detection of unbrazed areas, polarity testing, and presence/absence inspection of components can be performed in a single imaging session!

"FX Capture" is an inspection system that controls high-resolution DSLR cameras and ultra-high-resolution industrial cameras connected to a PC, enabling inspections with EasyInspector and DeepSky. This allows for inspections of items where the size of anomalies was previously too small to determine, as well as large items that require a wide field of view. Please feel free to contact us when you need assistance. 【Features】 ■ High-quality images that enable high-precision inspections ■ One-shot inspections made possible by a wide field of view *For more details, please refer to the related links or feel free to contact us.

Company：スカイロジック
Price：Other

Visual Inspection Equipment
Inspection Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[AI Image Inspection Case] Clip Shape Inspection

We will conduct inspections for shape defects caused by deformation of clips using AI image inspection software!

We received a request for inspection of deformation of clips from a manufacturer specializing in renovations and remodeling. The inspection system was specifically envisioned as follows: drop each sample one by one due to vibration, move it to the camera section via a conveyor belt, determine and sort using the camera, and then the conveyor belt separates the acceptable products from the defective ones. **[Inspection Settings and Results]** We conducted inspections for shape defects using the samples we received. We verified using two patterns: from above and from the side, and it was possible to identify acceptable and defective products from above. The side inspection was able to detect the "angle of the edge," the "gap" in the clip section, and "twisting." The left image shows three types detected, while the right image displays the separated labels. There is no specified quantity for "OK," and the setting for defective is from 0 to 0 (if even one is present, it is considered NG). **[Software and Equipment Used]** Software used: DeepSky Learning Edition Field of view: Approximately 40 x 30 mm Minimum size of inspection target: 30 mm Number of inspection points: 3 Camera resolution: 1.3 million pixels Lens focal length: 25 mm Distance between lens and product: Approximately 170 mm Lighting: Indoor fluorescent lights

Company：スカイロジック
Price：Other

Image Processing Software
Inspection Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[AI Image Inspection Case] Measurement inspection of the angle and length of the chamfered part of a printed circuit board.

The angle and length of the chamfered part of the electronic circuit board were measured.

This is a test where we send you a camera and sample products. Our company offers a free evaluation service with the equipment you want to use and sample delivery. We are constantly considering configurations to solve your problems accurately and cost-effectively with simple setups. 【Inspection Settings and Results】 By using the "Dimension and Angle Inspection" function of EasyInspector, we measure the dimensions, angles, and lengths of the chamfered parts of the substrate at 10 inspection points in 0.37 seconds. The red circles in the photo indicate the detected intersection points, and the green lines represent the detected edge parts. 【Software and Equipment Used】 Software Used: EasyInspector710 Field of View: 15 x 10mm Minimum Size of Inspection Target: 0.2mm Number of Inspection Points: 10 Camera Resolution: Microscope Lens Focal Length: Not used Distance between Lens and Product: Not recorded Lighting: Indoor light The current 'EasyInspector2' MS (MeaSure) package can perform inspections for [Position and Width Measurement] and [Angle Measurement].

Company：スカイロジック
Price：Other

Image Processing Software
Inspection Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[AI Image Inspection Case] Counting Individually Wrapped Items with Transparent Film

We will conduct inspections of the individual packaging count of gold powder, the content volume, and whether the package film is overlapping.

It is common to see transparent film used in the packaging of supplements, medicines, and food in everyday life. 【Inspection Settings and Results】 (1) Inspection of the number of films → Determination possible I was able to determine up to 5 layers with high accuracy. If a camera is positioned to capture the entire view of 10 layers, it will also be possible to make a determination. (2) Inspection of content volume → Determination not possible In indoor lighting, the reflection from the film made it impossible to confirm the contents. I conducted the inspection by placing a black board next to the sample for photography, but due to overlapping and uneven distribution of the contents, I was unable to distinguish the volume. Adjustments and innovations in lighting and content distribution are necessary for inspection. (3) Inspection of film overlap → Determination errors present Detection was achieved with an accuracy of 80% (10 errors out of 50). Since there are countless patterns of overlap, I trained with 40 images this time, but I felt that increasing the number of training images would improve accuracy. In cases of complete overlap, it tends to be determined as a single layer.

Company：スカイロジック
Price：Other

Image Processing Software
Inspection Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[AI Image Inspection Case] Automobile Label OCR Inspection

We conducted a label printing reading inspection at the request of an automobile manufacturer. The inspection was carried out using OCR reading functionality, and the contents were recorded in a CSV file.

It seems that the inspection involving a mix of letters and numbers was difficult to determine at the time. With improvements in lighting and settings, we were able to read with higher accuracy. This request was made in 2015, but the OCR reading function in the current EasyInspector has been enhanced, increasing its accuracy, allowing us to retain images and record content in a CSV file. 【Inspection Settings and Results】 By using EasyInspector's "Character Recognition (OCR)" function, we detected readings from 16 printed locations, achieving a probability accuracy of about 90%, and we were able to make determinations in under 3.41 seconds. A 3-megapixel camera provided the most stable inspections. It is indeed easier to misdetect when letters and numbers are mixed; for example, "8" and "B" are characters that are prone to misdetection. However, when "8" is among the numbers and "B" is among the letters, we were able to read them relatively accurately and stably. Although the number of inspection frames increases, we believe that separating letters and numbers and setting inspection frames accordingly will enable stable inspections.

Company：スカイロジック
Price：Other

Image Processing Software
Inspection Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Inspection robot that automates picking up, six-sided inspection, and sorting.

Solving the shortage of inspectors with robots. Automating everything from product retrieval to multi-surface inspection and OK/NG sorting.

The "Inspection Robot" automates the entire process from picking up products from the tray, changing their orientation and posture, to conducting image inspections on multiple surfaces, and sorting them into OK and NG categories based on inspection results. It automates the tasks that were previously performed by humans, such as retrieving products, changing their posture, conducting visual inspections, and sorting, using a robotic arm and AI-based visual inspection. It helps address the challenges of inspection processes that rely on human operators, such as the burden of securing and training inspectors, variability in judgments made by workers, and oversights due to fatigue or decreased concentration. The gripping methods, imaging techniques, and robot movements can be tailored to match the target products and inspection requirements. Please feel free to consult us about the products you wish to inspect or your current processes. 【Main Processes】 - Pick up products from the tray - Change the orientation and posture of the products - Conduct image inspections on multiple surfaces and locations - Determine OK/NG status - Sort the discharge destinations based on the judgment results - Save inspection images and judgment data as needed

Company：スカイロジック
Price：Other

Visual Inspection Equipment
Inspection Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cylindrical/Oval Container Dual Inspection Machine 'S-Bottle Dual'

By selecting the camera and lighting, we can accommodate various bottle and container inspections!

The "S-Bottle Dual" is an image inspection machine that inspects the printing quality and appearance quality of various bottles and containers with high speed and precision. It is a versatile inspection machine that can handle both cylindrical and oval shapes, and can accommodate various bottle and container inspections through the selection of cameras and lighting. With a high-resolution color line camera and advanced multifunctional color processing capabilities, it conducts quality inspections of multi-color prints and full-color designs. 【Features】 ■ Capable of inspecting both cylindrical and oval shapes ■ Can inspect transparent bottles without the influence of backlighting thanks to unique lighting technology ■ Inspection machine for printing and appearance quality of cylindrical/oval containers for cosmetics, pharmaceuticals, food, etc. ■ Automatically sorts and discharges good and defective products while performing high-speed inspections at up to 60 bottles per minute ■ Detects misalignment, molding defects, and dimensional defects from appearance, printing quality, and transfer quality *For more details, please refer to the PDF document or feel free to contact us.

Company：シリウスビジョン(旧ナビタスビジョン)
Price：Other

Other inspection equipment and devices
Defect Inspection Equipment
Visual Inspection Equipment
Inspection Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-speed automatic feeding sheet inspection machine 'S-Con III'

A conveyor inspection device that continuously inspects each piece while automatically supplying them with a feeder!

The "S-Con III" is an image inspection machine for sheet labels, cards, and sheets. The supply section can be equipped with a standard bottom feeder or a multi-feeder capable of bulk supply, with a maximum transport speed three times faster than conventional products, at 60m/min. Using a high-resolution line camera, it automatically detects fine defects such as pinholes, chips, overflows, smudges, foreign objects, and scratches. 【Features】 ■ Transport speed of 60m/min, high-speed inspection machine for sheet labels, cards, and sheets ■ The supply section can be selected between a standard bottom feeder or a multi-feeder for bulk supply ■ The suction conveyor method corrects warped workpieces for stable inspection ■ Achieves high-definition color processing with a three-plate color line camera (2K, 4K) ■ High-precision inspection with a resolution of 46μm (field of view 190mm, using a 4K line sensor) *For more details, please refer to the PDF document or feel free to contact us.

Company：シリウスビジョン(旧ナビタスビジョン)
Price：Other

Other inspection equipment and devices
Defect Inspection Equipment
Visual Inspection Equipment
Inspection Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tabletop Vertical Axis Roll Inspection Machine 'S-Lab Lite'

Compact tabletop size of 1,510mm × 710mm! Quiet design considerate of the operator.

The "S-Lab Lite" is a compact desktop image inspection machine designed for the quality inspection of roll labels, classified as one of the smallest in the industry. It employs a high-speed, high-precision line camera or a close-up CIS camera to automatically detect fine defects (such as foreign objects, missing characters, overflow, smudging, fading, pinholes, etc.). By installing an optional label marking device, it can automatically mark defective labels near the inspection area without stopping during the inspection process. 【Features】 ■ Compact desktop size of 1,510mm × 710mm ■ Quiet design considerate of the operator ■ Maximum transport speed of 50m/min (inspection speed depends on label size and inspection content) ■ Applicable for a maximum roll width of 200mm and roll diameter of φ350mm ■ No need for long lead tapes like conventional machines *For more details, please refer to the PDF document or feel free to contact us.

Company：シリウスビジョン(旧ナビタスビジョン)
Price：Other

Other inspection equipment and devices
Defect Inspection Equipment
Visual Inspection Equipment
Inspection Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Small Horizontal Axis Roll Inspection Machine 'S-Lab MSY'

Maximum transport speed of 120m/min! Roll inspection machine using a conveyor manufactured by Belpack.

The "S-Lab MSY" is an image inspection machine designed for the quality inspection of roll-type seal labels. It employs a high-speed, high-precision line camera to automatically detect fine defects (foreign objects, missing characters, misalignment, smudging, fading, pinholes, etc.). It can measure misalignment, positional deviation, cutting deviation, and dimensions at arbitrary locations with high precision. 【Features】 ■ Roll inspection machine utilizing a conveyor from Belpack ■ Standard body size is 1,250mm (W) × 1,166mm (D) × 1,527mm (H) ■ Maximum transport speed of 120m/min (Inspection speed depends on label size, inspection content, and inspection accuracy) ■ Applicable for maximum roll widths of 300mm to 350mm and roll diameters of φ500mm ■ Utilizes color/monochrome line cameras to achieve high-speed, high-precision image inspection *For more details, please refer to the PDF materials or feel free to contact us.

Company：シリウスビジョン(旧ナビタスビジョン)
Price：Other

Other inspection equipment and devices
Defect Inspection Equipment
Visual Inspection Equipment
Inspection Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Slitter-equipped horizontal axis roll inspection machine 'S-Lab SL'

Even if there are multiple NG labels between the NG stop position and the camera, all have been automatically inspected!

The "S-Lab SL" is a slitter-equipped rewind inspection machine that simultaneously achieves high-speed slitting and high-speed inspection. It allows for continuous full inspection while slitting (without uninspected labels). Even during NG stops, there are no uninspected labels, and even if there are multiple NG labels between the NG stop position and the camera, all have been automatically inspected. At this time, each NG label automatically stops at a designated position on the NG processing stage. 【Features】 ■ Maximum transport speed of 200m/min, achieving high-speed slitting and fully automatic inspection simultaneously (inspection speed depends on label size and inspection content) ■ Applicable to roll widths of 100 to 350mm and roll diameters of up to φ600mm ■ Uses color/monochrome line cameras to achieve high-speed, high-precision image inspection ■ Easy inspection settings for anyone with a wizard-style simple setup operation menu *For more details, please refer to the PDF materials or feel free to contact us.

Company：シリウスビジョン(旧ナビタスビジョン)
Price：Other

Other inspection equipment and devices
Defect Inspection Equipment
Visual Inspection Equipment
Inspection Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Horizontal Axis Roll Inspection Machine "S-Lab SSR/S-Lab SSR-S"

Maximum transport speed of 100m/min! It is possible to accommodate an inspection machine with a slitter as an option.

The "S-Lab SSR/S-Lab SSR-S" is an image inspection machine designed for the quality inspection of printed roll labels. It employs a high-speed, high-precision line camera that automatically detects fine defects (foreign objects, missing characters, overflow, smudging, fading, pinholes, etc.). With a wizard-style simple setup operation menu, anyone can easily configure the inspection settings. 【Features】 ■ Maximum transport speed of 100m/min (inspection speed depends on label size and inspection content) ■ An optional specification for a transport speed of 200m/min is also available ■ Applicable for maximum roll widths of 300mm to 350mm and roll diameters of φ500mm to 600mm (selectable) ■ Utilizes color/monochrome line cameras to achieve high-speed, high-precision image inspection ■ Easy inspection setup for anyone with the wizard-style simple setup operation menu *For more details, please refer to the PDF materials or feel free to contact us.

Company：シリウスビジョン(旧ナビタスビジョン)
Price：Other

Other inspection equipment and devices
Defect Inspection Equipment
Visual Inspection Equipment
Inspection Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Slitter-equipped horizontal axis roll inspection machine 'S-Lab SSR-SB'

It is now possible to perform reverse transport, which was not possible with conventional slitters equipped inspection machines!

The "S-Lab SSR-SB" is an image inspection machine that simultaneously achieves slit and roll printing quality inspection. To prevent human errors, this inspection machine has been improved to allow for reverse transport. It employs a high-speed, high-precision line camera that automatically detects fine defects (foreign substances, missing characters, overflow, blurring, smudging, pinholes, etc.). 【Features】 ■ Device size: 3,450mm (W) × 950mm (D) × 1,838mm (H) *excluding roll diameter ■ Maximum transport speed: 100m/min (inspection speed depends on label size and inspection content) ■ Applicable for maximum roll width of 350mm and roll diameter of φ600mm ■ Utilizes color/monochrome line cameras to achieve high-speed, high-precision image inspection ■ Optionally, multi-lighting that can inspect the presence or absence of transparent labels is available *For more details, please refer to the PDF document or feel free to contact us.

Company：シリウスビジョン(旧ナビタスビジョン)
Price：Other

Other inspection equipment and devices
Defect Inspection Equipment
Visual Inspection Equipment
Inspection Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Auto-Feeder Type Inspection System 'S-Scan A3F/A4F'

Double-sided printed materials can be scanned and inspected at high speed! A testing system that can also perform ΔE color difference inspection.

The "S-Scan A3F/A4F" is an auto-feeder type inspection system suitable for checking manuscripts such as different forms and books for each multiple page. It allows for continuous feeding of inspection targets with the auto-feeder, enabling inspections, and can scan and inspect double-sided printed materials at high speed. Additionally, it can compare scanned images, compare data with analog (printed materials), and compare data with each other. 【Features】 ■ Suitable for checking manuscripts such as different forms and books for each multiple page ■ Allows for continuous feeding of inspection targets with the auto-feeder ■ Can scan and inspect double-sided printed materials at high speed ■ Capable of comparing scanned images, comparing data with analog (printed materials), and comparing data with each other *For more details, please refer to the PDF materials or feel free to contact us.

Company：シリウスビジョン(旧ナビタスビジョン)
Price：Other

Other inspection equipment and devices
Defect Inspection Equipment
Visual Inspection Equipment
Inspection Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Resin Plate Inspection System 'S-Scan BLIS'

High-speed scanning is possible, with a scanning time of about 8 seconds and a standard inspection time of 30 to 40 seconds!

The "S-Scan BLIS" is a proofing system that enables the inspection of resin plates with significant surface irregularities using unique imaging technology and software techniques. It employs a two-step inspection process, first inspecting one piece of the reference image (digital) and one piece of the inspection image, and then inspecting that inspection image piece against other pieces of the inspection image. From the reference image (digital), it can automatically divide the inspection areas of the concave and convex parts of the plate's surface and separate the inspection levels. 【Features】 ■ Revolutionary new imaging technology enables direct proofing of resin plates, which was previously impossible. ■ Maximum inspection target size is A3 (negotiable). ■ Compact design makes it easy to install in an office, operating on single-phase AC100V. ■ A suppression mechanism flattens the imaging surface, achieving stable imaging. ■ The use of a CIS camera enables high-precision image inspection with minimal distortion. *For more details, please refer to the PDF materials or feel free to contact us.

Company：シリウスビジョン(旧ナビタスビジョン)
Price：Other

Other inspection equipment and devices
Defect Inspection Equipment
Visual Inspection Equipment
Inspection Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

USB3.0 expandable up to 8 ports! Image input board UE-1004

A frame grabber that can achieve high data rates with a maximum transfer capability of 40 Gbps.

This is a frame grabber (image input board) that can be expanded into high-performance embedded systems for applications such as machine vision, factory automation, quality control, logistics, medical, security, and traffic monitoring. If you find that the number of USB ports is too few, please refer to the UE-1008 (with 8 USB 3.0 ports). →http://goo.gl/4slxcs For more details, please download the catalog or feel free to contact us.

Company：VECOW 台湾本社
Price：Other

Image Processing Board
Embedded Board Computers
Image Input Board
Inspection Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Inspection Systems Product List and Ranking from 289 Manufacturers, Suppliers and Companies | IPROS GMS

Inspection Systems Manufacturer, Suppliers and Company Rankings

Inspection Systems Product ranking