We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Lining.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Lining(frp) - List of Manufacturers, Suppliers, Companies and Products

Last Updated： Aggregation Period:Sep 10, 2025～Oct 07, 2025
This ranking is based on the number of page views on our site.

Lining Product List

1～15 item / All 20 items

Displayed results
FRP Lining WDS (Water Duct System)

FRP Lining WDS (Water Duct System)

Prevent liquid leakage accidents outside the tank! Are your underground storage tank leakage measures foolproof?

"FRP Lining WDS" implements general FRP lining and special three-dimensional hollow structure FRP lining in existing or newly constructed storage tanks. It uses fiber-reinforced plastic (FRP) made from vinyl ester resin, ensuring high corrosion resistance to select durable materials suited to the properties of the stored liquid. In the event of a rupture in an underground storage tank, causing a leak, it can be detected instantly and will alert to the leakage. [Features] - Uses fiber-reinforced plastic (FRP) - High corrosion resistance - High pressure resistance - Sensors detect liquid leakage and immediately issue a warning - Can be easily introduced into existing storage tanks *For more details, please refer to the PDF materials or feel free to contact us.

  • Other safety equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FRP tank lining method

FRP tank lining method

Extend the life of the liquid contact tank and piping with lining and coating!

The "FRP Tank Lining Method" regenerates and extends the life of aging underground tanks at low cost and in a short period of time. It stops the progression of corrosion in existing underground tanks and prevents leaks. Losses caused by corrosion (decay areas) are compensated by forming an FRP layer after cleaning. This method has achieved significant cost reductions compared to traditional tank replacement work. 【Features】 ■ Low Cost - Approximately one-third the cost of tank replacement ■ Construction Period - One 10kl underground tank: about 10 days - Simultaneous construction of four tanks: about 15 days (without manholes) *For more details, please refer to the PDF materials or feel free to contact us.

  • tank

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FRP lining

FRP lining

Leak prevention for underground tanks! A room temperature curing type resin lining that makes on-site construction and installation of large tanks easy.

"FRP lining" is a resin lining that adheres FRP (fiber-reinforced plastic) to the inner surface of tanks to enhance corrosion resistance. Underground storage tanks pose a risk of leakage of stored materials to the outside due to deterioration and corrosion from aging. By using this product, the durability of underground tanks is improved, preventing leakage accidents before they occur. 【Features】 - Adheres FRP (fiber-reinforced plastic) to the inner surface of tanks to enhance corrosion resistance - Improves the durability of underground tanks - Can prevent leakage accidents before they occur - Room temperature curing type, making on-site construction and large tanks easy to install - Can be applied to both existing and new installations *For more details, please refer to the PDF document or feel free to contact us.

  • Plastic utensils and containers
  • Rubber
  • Other safety and hygiene products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Improvement of Safety and Workability in Cleaning: Tank FRP Lining

[Case Study] Improvement of Safety and Workability in Cleaning: Tank FRP Lining

Improving safety and cleaning work efficiency - Underground tank FRP lining

When cleaning the interior of the raw material underground tank, high-pressure washing was used, but there was a problem with poor dirt removal, making cleaning difficult. Additionally, because the raw materials are acidic, the existing resin coating tends to peel off easily, which can lead to the underlying concrete corroding. Issues: 1. Generally, using a high-pressure washer can apply too much pressure, causing the resin coating to peel off. 2. Cleaning takes a considerable amount of time (over 2 hours). *Neglecting cleaning can lead to the underground pit tank corroding and aging due to hydrogen sulfide and other factors. If left unattended, this can result in the leakage of hazardous materials, leading to serious environmental issues.

  • tank

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-strength FRP lining "Airtight" for concrete water tanks

High-strength FRP lining "Airtight" for concrete water tanks

The load increase is minimal, and there is no stress on the structure! The hardening properties are good, and there is no concern about insufficient hardening.

"Air Tight" is a high-strength FRP waterproofing and corrosion protection lining method that combines high-strength aramid fibers with FRP waterproofing and corrosion protection lining. It forms a robust FRP lining layer with high strength and toughness. It can be constructed in a short period, reducing the construction time. The work involved is equivalent to waterproofing and corrosion protection construction. It can be used to improve the seismic resistance of structures and reinforce insufficient strength. 【Features】 ■ Lightweight ■ Thin film ■ High strength ■ Toughness ■ Durability *For more details, please refer to the PDF materials or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Bioethanol fuel compatible FRP lining "SST Lining"

Bioethanol fuel compatible FRP lining "SST Lining"

Achieving high-quality maintenance. Evaluated for performance by the Hazardous Materials Safety Technology Association.

"SST Lining" is an underground tank FRP lining that has passed rigorous performance evaluation tests conducted by the Hazardous Materials Safety Technology Association (KHK). In the performance evaluation tests, it has passed all assessments, including sandblasting adhesion performance tests, 100% ethanol resistance performance tests, and multilayer structural delamination strength performance tests. Additionally, the construction period is short, approximately one week per tank, and the cost burden is light, which are also notable features. 【Advantages of Construction】 ■ Short construction period ■ Can be constructed while in operation ■ Light cost burden ■ If it is a fuel handling facility, the cost burden can be further reduced (utilizing subsidy programs) *For more details, please refer to the PDF materials or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Surface treatment: Ceramic sleeve lining (wear resistance, long lifespan)

Surface treatment: Ceramic sleeve lining (wear resistance, long lifespan)

Ceramic sleeve relining (wear-resistant ceramic double pipe) (wear resistance, long lifespan)

■Outstanding Features We use fine ceramics with a very dense structure as the inner pipe material, which provides excellent wear resistance. Compared to plating and thermal spraying, it has a thicker wall (5mm to 15mm) and boasts a very long lifespan. The ceramic sleeve is also shaped and fired to match the curvature of the bend pipe. There are almost no joints or steps, allowing for smooth transport without causing turbulence. There is no concern about peeling, which is often a worry with chip lining.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
What is a water tank lining (cistern lining)?

What is a water tank lining (cistern lining)?

Water supply facilities are an important lifeline! It is our responsibility to ensure a certain level of water intake even during emergencies such as earthquakes.

"Water Tank Lining (Reservoir Lining)" is a construction method primarily used for the internal lining (corrosion and waterproofing) of concrete tanks (such as PC tanks and RC tanks) to protect the structure over the long term. As the seismic retrofitting of water supply facilities is promoted to secure lifelines, internal lining plays a very important role in achieving the same objectives of securing water and preventing leaks. The balance between elongation and strength of waterproof and anti-corrosion materials is a crucial factor, and in recent years, there has been increasing attention on high-strength, elongation-type polyurea resins over rigid coatings like epoxy, particularly from the perspective of preventing leak accidents caused by earthquake damage. [Types of Construction] ■ Ultra-fast curing spray lining (urethane, polyurea) ■ Epoxy lining ■ Reinforced plastic lining (FRP, vinyl ester) ■ Mortar protection method *For more details, please refer to the related link page or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
PCM flake lining

PCM flake lining

Are you having trouble with sudden breakage of glass lining products?

We will solve it with PCM flake lining made by New Prodo Co., Ltd.! Factory production of parts and on-site installation of large equipment If it matches your company's conditions, there is also the possibility of extending its lifespan.

  • Composite Materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Corrosion-resistant lining/coating

Corrosion-resistant lining/coating

We will bond the protective material to the structure and design and construct a durable protective layer.

We offer "corrosion-resistant lining/coating" services. With the aim of protecting iron and concrete structures, we bond protective materials to the structures and design and construct a durable protective layer. Chuden Kogyo strives to solve problems with the spirit of being the best partner, building trust through our technology and experience. 【Features】 ■ Design of protective layers (linings) that respond to the type of stored materials (acids and alkalis), humidity, temperature differences, and pressure fluctuations. ■ Proposals for interior treatments and lining specifications based on the material, installation location, and usage conditions of tanks and vessels. ■ Consideration of the flexibility and stability in response to the expansion and contraction of tanks and vessels. *For more details, please refer to the external link or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Lining of chemical tanks, etc.

Lining of chemical tanks, etc.

Introduction of corrosion-resistant materials that can be used for corrosion protection work on tanks for various oils and chemicals, used in various fields such as food resistance and electronic materials!

We would like to introduce the lining (corrosion-resistant material) used for anti-corrosion work on various oil and chemical tanks, specifically FRP materials (vinyl ester) epoxy resin. "Unsaturated polyester resin and vinyl ester resin" are types of modified epoxy resin that possess characteristics such as high strength, toughness, and alkali resistance, while also offering advantages in workability, including faster curing speed, low-temperature curing properties, and low viscosity, as well as a wide range of chemical resistance (acid resistance and solvent resistance) compared to epoxy resin. These resins also excel in physical properties such as impact resistance and adhesion, as well as light-curing characteristics and water resistance, making them suitable for various fields including corrosion resistance, chemical civil engineering, and electronic materials. On our website, we provide a compatibility chart for lining materials and examples of lining (corrosion prevention work) related to the Water Pollution Control Act. *For more details, please refer to the related links page or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
A perfect document for those who want to know about fluororesin lining is presented.

A perfect document for those who want to know about fluororesin lining is presented.

We are currently offering detailed materials explaining the types and processing methods of fluororesin lining.

■What is Fluororesin Lining? Fluororesin lining is one type of "resin lining." Resin lining includes those utilizing "polyethylene" and "nylon" resins, as well as "FRP lining," which combines glass fibers with resin. Among these, "fluororesin" is a material that is resistant to chemical corrosion in harsh environments. ■Types of Fluororesin Lining Types of fluororesin lining include PTFE lining, PFA lining, and ETFE lining. Each lining requires appropriate selection based on the usage environment, construction method, and application. ■Main Fluororesin Lining Methods There are three main methods: "sheet lining," "baked coating," and "rotolining." ■Various Lining Methods At Yoshida SKT, we can accommodate various processing methods according to the shape and thickness of the material, not only based on material differences but also using "sheet lining" with fluororesin sheets, "PFA lining" with baked coatings, and "rotolining" using rotational molding. *When considering lining, please check the materials and contact us for inquiries.

  • s-020100.gif
  • ETFE_edited.jpg
  • IMG_7868_edited.jpg
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
What is lining? A detailed explanation of fluororesin lining.

What is lining? A detailed explanation of fluororesin lining.

We are currently offering detailed materials explaining fluororesin lining, which is particularly excellent in chemical resistance among linings.

■What is Lining? Lining is a method of protecting a substrate with a relatively thick film to enhance corrosion resistance. The lining materials primarily used are "rubber," "resin," and "glass." In linings that require corrosion resistance, a coating without pinholes is crucial. ■What is Fluororesin Lining? Fluororesin lining is one type of "resin lining." Resin lining includes those utilizing "polyethylene" and "nylon" resins, as well as "FRP lining," which combines glass fibers and resin. Among these, "fluororesin" is a material that is less susceptible to chemicals in harsh environments. ■Types of Fluororesin Lining Types of fluororesin lining include PTFE lining, PFA lining, and ETFE lining. Each lining requires appropriate selection based on the usage environment, method, and application. ■Main Fluororesin Lining Methods There are three main methods: 1. "Sheet Lining" 2. "Baked Coating" 3. "Roto Lining" *When considering lining, please check the materials and contact us for inquiries.

  • s-020100.gif
  • ETFE_edited.jpg
  • IMG_7868_edited.jpg
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
A detailed explanation about Teflon lining.

A detailed explanation about Teflon lining.

We are currently providing detailed materials explaining the fluororesin lining, which is particularly excellent in chemical resistance among linings.

■What is Teflon Lining? Teflon is a trademark of Chemours, and generally refers to fluororesin lining. Fluororesin is particularly excellent in chemical stability among various lining materials. Therefore, it is widely used in fields such as chemicals, semiconductors, and pharmaceuticals, where heavy corrosion resistance and purity are required. ■One Type of Resin Lining Fluororesin lining is one type of "resin lining." Resin lining includes those using "polyethylene" and "nylon" resins, as well as "FRP lining," which combines glass fibers and resin. Among these, "fluororesin" is a material that is less susceptible to chemicals in harsh environments. ■Types of Fluororesin Lining Types of fluororesin lining include PTFE lining, PFA lining, and ETFE lining. Each lining requires appropriate selection based on the usage environment, construction method, and application. ■Main Fluororesin Lining Methods There are three main methods: - "Sheet Lining" - "Baked Coating" - "Roto Lining" *When considering lining, please check the materials and contact us.

  • s-020100.gif
  • ETFE_edited.jpg
  • IMG_7868_edited.jpg
  • Surface treatment contract service

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Lining

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.