Last Updated： Aggregation Period:Mar 18, 2026～Apr 14, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Mar 18, 2026～Apr 14, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Mar 18, 2026～Apr 14, 2026
This ranking is based on the number of page views on our site.
31～60 item / All 265 items
Load cell for compression or tension in one direction.
●Maximum load: 2000N-20kN ●Fix the equipment so that the lead wire protrudes, and measure the load applied in the compression or tension direction. *Only unidirectional forces in compression or tension can be measured. Please decide the installation orientation according to the direction of the load.
Compression or tension unidirectional load cell
● Compact, lightweight, and suitable for narrow spaces ● The sensor can be screwed at both ends, making it easy to integrate into equipment and secure samples.
Ultra-small load cell with a diameter of 18 mm and a height of 25 mm.
● Compact, lightweight, and suitable for narrow spaces ● The sensor can be screwed at both ends, making it easy to integrate into equipment and secure samples ● Direction of force: Both compression and tension ● Screw: Male thread (M5)
Cleanroom-Compatible 1500L Stainless Steel Cylinder Stand (for 1 cylinder) / Model Number M163CBS-7000L-SUS1K
Stainless steel cylinder holder compatible with clean rooms (cylinder stand) for 7000 liters. We offer holders for 1 to 5 cylinders.
Ultra-thin design that is easy to install in existing equipment and does not require pit construction! An IPX7 waterproof type is also available. This product features a robust structure that is strong against overload and lateral loads.
We offer "low-profile platform scale load cells," which are widely used in industrial and commercial devices and systems as weight and load measuring instruments. They can be easily integrated into existing equipment without being constrained by space, and they achieve ultra-thin designs that operate stably and with high precision even after long-term use. With a robust structure that is resistant to overload and lateral loads, and no moving parts, measurement fluctuations are minimized. 【Features】 ■ Revolutionary thinness: LPR, LPO = 25–33mm ■ Beam-type strain gauge sensors are built into the load cell support ■ High natural frequency for standalone units, enabling high-speed processing depending on the measuring instrument ■ Long-term measurement is possible while containers or devices are placed on them ■ Waterproof type available with IPX7 rating *For more details, please refer to the documentation. Feel free to contact us with any inquiries.
Waterproof and load-bearing platform scale load cell. The platform is made of stainless steel SUS304, and its slim design makes loading and unloading during measurement easy.
Protection ratings: IP65, IP66, IP67 load cells Customized products for rated load (capacity), size, and accuracy The platform features a slim design and can be used without a pit (no foundation work required). It is also possible to manufacture ramps, all stainless steel, and platforms with checker plates. We will propose the products you need. Please contact us!
Due to the low height of the scale, it can be installed directly on the existing foundation, making it easy to load and unload the measured items (no foundation work required) from 19mm onward.
Management of industrial gas residuals in semiconductor manufacturing lines. Management of residuals for dyes, adhesives, etc. Management of liquid material residuals in baking systems. Weighing on conveyor lines with the installation of free rollers. Weighing of draw-off from storage tanks.
The platform scale load cell with excellent load-bearing capacity is ideal for measuring large containers due to its caster-equipped frame.
Design considering the impact during loading and unloading with a hoist Protection ratings: IP65, IP66, IP67 load cells Customized products for rated load (capacity), size, and accuracy We will propose the products you need. Please contact us!
Weight control is possible from seeding to rotation lifting and completion of the ingot for the CZ method single crystal growth apparatus.
This is a high-performance load cell used in the initial processes of single crystal growth and automatic diameter control (ADC). It accurately converts the weight of the single crystal, which grows while rotating, into a stable electrical output. A unique load sensor is employed in the load cell detection section to be used as a critical sensor for the pulling device in the Czochralski (CZ) method. Within the operating temperature range of the load cell, the compensation circuit functions without requiring inert gas for cooling. 【Features】 ◆ Low ripple with strong noise resistance Circuit design thoroughly pursued to prevent wideband electrical noise, achieving stable performance with low ripple. ◆ Fast response frequency Frequency characteristics compatible with high-speed ADC (DC–1.2Hz (-3dB)) can be obtained. ◆ Stable operation from low to high rotation speeds Operates stably from low rotation speeds to high speeds (300rpm), expanding the application range of measurement control. Delivery includes rotation test inspection data. 【Examples of Applications】 Crystal growth equipment for single crystal ingot growth. *For details, please contact us or download the PDF.
Anyone can do it easily! No need for complicated equipment setup, wiring, or configuration. Just turn on the power and you can start measuring.
At TENSOR Co., Ltd., which designs and manufactures load cells and various converters, we handle the "Platform Scale with Load Cell for Gas Cylinder Stand." No need for complicated equipment fixing, wiring, or setup. Just turn on the power to start measuring. We offer cylinders for 40L and 47L. 【Specifications】 ■ Gas Cylinder Stand: For 40L and 47L cylinders ■ Load Cell Capacity: 100kg, 200kg ■ Platform Size: 280×280 ■ Indicator: Digital with zero function, power supply AC100V (includes 2m power cord with plug) ■ Display/Accuracy: Minimum scale 0.1, accuracy 0.1±2 digits ■ Custom production for 10L is also possible *For more details, please refer to the PDF document or feel free to contact us.
Introducing a super-thin scale that is easy to install in existing equipment and does not require pit construction. It is waterproof and can be cleaned.
We would like to introduce a low-profile scale that uses a waterproof load cell. In the surface treatment process, it is likely that liquids will be used. In that case, the following may be necessary for the scale used for weighing: ◆ The height of the scale should be as low as possible ◆ It should be waterproof ◆ It should be cleanable WLP is a product that meets the above conditions. We would like to propose a product suitable for your usage. *For more details, please refer to the materials. Feel free to contact us with any inquiries.
Ultra-thin, IPX7 waterproof design, made of stainless steel, suitable for use in harsh environments. No foundation work required, easy to integrate into devices.
<Features> ■ Waterproof design, protection rating IPX7 Enables installation in environments that were previously difficult to set up ■ Stainless steel SUS304 platform ■ Slim design, height starting from 28mm ■ No foundation work or ramp required, can be integrated into existing equipment Easy to incorporate into existing devices ■ Stable with no shaking, outstanding performance <Examples> ■ Weight management of liquefied gas and chemical liquids (usage amount, remaining amount, mixing and formulation control) ■ Control of blending in food and beverage (tanks, hoppers) ■ Wheel load scales ■ Weight measurement during transportation ■ Sorting of agricultural products *For more details, please refer to the catalog. Feel free to contact us with any inquiries.
Measure the weight of 4 points at a low price. Individual weights and the balance of the 4 points can be easily understood at a glance. It can measure anything, including vehicles, dollies, and pallets.
You can select the load capacity and shape of the sensor (load cell) according to the measurement object. In the case of vehicles, you can measure the weight for each axle. If you want to see the individual weights, you can display them in four sections. Additionally, if you want to check the total weight and balance, you can manage the weight display on a computer. By using PC software, it can accommodate a wide range of uses from general to specialized applications. Unlike overseas products, it is domestically produced, so you can use it with peace of mind even after installation.
By installing the load directly at the location where it is applied to the pin-type load cell, accuracy can be improved.
We are struggling during the design phase because weighing with a crane is affected by sheave efficiency and mechanical resistance, which makes it difficult to apply an accurate load to the load cell without reducing the lifting height. Pin-type load cells offer advantages such as making it easier to design such installations and allowing the suspended load to be applied directly to the location of the pin-type load cell, thereby improving accuracy.
A super small tension and compression load cell with a height of 14mm and a width of 7mm. M2 threaded processing is applied to both ends of the body.
Ideal for various force measurements and wire tension measurements.
Tension and compression load cell with a height of 20mm and a width of 9mm.
Ideal for various force measurements and wire tension measurements.
Compression type load cell with an outer diameter of φ6mm (φ7mm) and a height of 3.5mm (4.5mm).
Ultra-compact design. For various force measurement and load management applications in production lines.
Small, lightweight, height 4mm, outer diameter φ12mm.
Load measurement in locations with restricted installation.
Space-saving area with ultra-compact load cells.
We also accommodate custom-made requests, so please feel free to contact us.
Load cell amplifier for embedded systems
The main specifications of the standard product are as follows. (Rated output, applied voltage, calibration values, etc. can be easily customized at the time of order) 1) Input: Balanced differential 1ch, 2) Sensor applied voltage: 10V, 3) Rated output: ±10V, 4) Filter: 2Hz/-3dB, 5) Temperature drift: within 0.01% F.S./℃, 6) Non-linearity: within 0.02% F.S., 7) Rated output: ±10V, 8) Power supply: ±15V
High precision and performance. Moreover, it is a low-cost ultra-compact load cell amplifier.
The functionality is simple, but it is a low-cost, ultra-compact load cell amplifier that does not fall short in accuracy compared to high-performance products.
Load cell
*Product Details* Suitable for weighing floor scales, tank scales, hoppers, etc. High-precision weighing is possible by combining with a rocker pin (automatic centering function). It features hermetic sealing and is made entirely of stainless steel, offering excellent environmental resistance. *Specifications* Manufacturer link: http://www.minebea-mcd.com/product/loadcell/compression/c2b1.html
Load cell
*Product Details This is for medium capacity scales. It is tall, making it suitable for scales with a large loading surface. OIML R60 certified product Manufacturer link: http://www.minebea-mcd.com/product/loadcell/singlepoint/u2d1.html
Load cell
This is for measuring medium weight. It is suitable for thin scales. OIML R60, NTEP certified product. Manufacturer link page: http://www.minebea-mcd.com/product/loadcell/singlepoint/c2g1.html
Load cell
Suitable for weighing floor scales, tank scales, hoppers, etc. High-precision weighing is possible by combining with a rocker pin (automatic centering function).
Load cell
This is for measuring medium weight. Due to its height, it is suitable for relatively large weighing surfaces. OIML R60 certified product. Manufacturer link: http://www.minebea-mcd.com/product/loadcell/singlepoint/cb004.html
Load cell
This is for high-capacity scales. It is suitable for weighing scales, etc. OIML R60 certified product. Manufacturer link: http://www.minebea-mcd.com/product/loadcell/singlepoint/cb14.html
Load cell
It is a slim precision compression load cell made of all stainless steel.
Load cell
This is a small and lightweight load cell with a diameter of 12mm to 20mm.
Load cell
This is for a medium capacity scale. It is suitable for large weighing surfaces due to its height. OIML R60 certified product. Manufacturer link: http://www.minebea-mcd.com/product/loadcell/singlepoint/u2d1.html
