We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for MILL.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

MILL(03) - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

Last Updated： Aggregation Period:Jan 14, 2026～Feb 10, 2026
This ranking is based on the number of page views on our site.

MILL Product List

61～90 item / All 106 items

Displayed results
[Examples of Direct Engraving Processing of Quenched Steel] Fine Screws

[Examples of Direct Engraving Processing of Quenched Steel] Fine Screws

Introducing machining examples of STAVAX (HRC52)! Achieving no polishing and no burrs under high-speed machining conditions!

We would like to introduce an example of direct engraving processing of hardened steel produced by the machining machine "CEGA-542 (Roku-Roku)" with a maximum performance of 30,000 min-1. The screw shape is a fine direct engraving that connects to the outer frame with two Φ0.3mm bridges on the end face. Using a CBN ball end mill, we have achieved a burr-free and polish-free finish under high-speed processing conditions. 【Example】 ■Material: STAVAX (HRC52) ■Processing size: 20×20×6mm *For more details, please refer to the PDF document or feel free to contact us.

  • Other processing machines
  • Special Processing Machinery
  • others
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultra-hard straight digging case Processing machine: Machining center

Ultra-hard straight digging case Processing machine: Machining center

I tried machining a tapered hole on the end face of a super hard round bar using a ball end mill. Machine used: machining center.

A φ2, 90° tapered hole was drilled into the end face of a round bar made of ultra-fine particle super hard alloy, Sumitomo A1 (HRA91.4). This time, a diamond-coated tool from Union Tool was used. Compared to the finish of an electroplated tool, the surface is finished quite beautifully.

  • Non-ferrous metals
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
JEDI-SC (Fixed-Grade Classification)

JEDI-SC (Fixed-Grade Classification)

A simple structure without moving parts, featuring a product discharge duct at the top of the casing.

The "JEDI-SC (Fixed Classification)" is a fluidized bed jet mill with a simple structure that does not have rotating parts, making it easy to disassemble and assemble. The classification rotor system does not require the necessary sealing air, reducing the amount of compressed air by approximately 20% compared to the rotor system. In addition to the standard stainless steel specification, various ceramics and hard materials can also be applied. 【Features】 ■ Adopts a fixed classification mechanism ■ Simple structure ■ Easy cleaning, washing, and maintenance ■ Reduction of compressed air consumption ■ Expansion of applicable materials in contact with the powder *For more details, please refer to the PDF document or feel free to contact us.

  • Crusher
  • Other powder equipment
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
X5070 Blue Coating Carbide Solid End Mill G8A01

X5070 Blue Coating Carbide Solid End Mill G8A01

High wear resistance and good surface finish! Two-flute neck type end mill.

We handle the blue-coated carbide solid end mill "X5070." The 'G8A01 (cylindrical shank)' is a two-flute, neck-type end mill. It boasts high wear resistance and is suitable for dry cutting and high-speed cutting due to the combination of newly developed base material and coating. 【Features】 ■ For high-hardness material processing ■ Suitable for dry cutting and high-speed cutting ■ Good surface finish ■ For high-precision machining ■ High wear resistance *For more details, please refer to the PDF document or feel free to contact us.

  • End Mills
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Experimental Grinding Machine "Lecce Cutting Mill SM 300"

Experimental Grinding Machine "Lecce Cutting Mill SM 300"

Powerful motor for strong crushing! Suitable for soft to medium-hard materials, elastic items, and mixtures!

The "Cutting Mill SM 300" is a powerful cutting mill that can crush hard samples that other cutting mills cannot. With enhanced drive components featuring high torque performance from a 3kW motor utilizing RES technology, it efficiently crushes heterogeneous mixtures such as waste and electronic components. Depending on the sample, it can also reach the desired particle size for analysis. 【Features】 ■ Powerful crushing force with a 3kW motor that has high torque performance ■ The rotor speed can be continuously adjusted from 700 to 3,000 rpm, accommodating various samples ■ Efficient crushing with newly designed double-fixed blades ■ Easy cleaning with a rotor that can be removed without tools, a large open crushing chamber, and a surface finish that resists dirt ■ Easily determine the crushing particle size by selecting screens with hole sizes from 0.25 to 20 mm ■ A wide variety of hoppers, collection containers, rotors, and screens available ■ Maximum safety with motor brakes, interlock mechanisms, and a robust frame *For more details, please refer to the PDF document or feel free to contact us.

  • 7ad481540ef5ed027df7db0aa7e0ace5.png
  • 2f93b4f00a6a4fff2df7ccd333ec0b98.png
  • dc04f035e2c48b99b4acd3e5af6c861f.png
  • Crusher
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tabletop Continuous Bead Mill Start Lab RMH Type

Tabletop Continuous Bead Mill Start Lab RMH Type

A bead mill that is strong in processing coarse particles and high viscosity. It is easy to scale up to the production machine NVM type.

The bead separation mechanism employs a gap separator type. It is strong against coarse particles and high viscosity, allowing for processing without clogging in the separation section. Due to its continuous operation and large range of input amounts, it can also be used as a production (prototype) machine despite its small size. Additionally, since it has the same structure as the production machine New Bisc Mill NVM type, it is easy to consider conditions for scale-up.

  • Other processing machines
  • Other metal materials
  • Fine grinding machine
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Super Hard End Mill "SG Ball End Mill"

Super Hard End Mill "SG Ball End Mill"

With stopper ring! A wide variety of sizes of ultra-hard SG ball end mills.

The "SG Ball End Mill" is a product handled by BBK Company, which manufactures precision cutting carbide tools, precision molds, and press parts. The material is carbide, which lasts about 7 to 10 times longer than high-speed steel (HSS). It comes with a stopper ring, but orders without the ring can also be accepted. Additionally, we can accommodate sizes that meet your needs, so please feel free to consult us. 【Features】 ■ Carbide ■ Lasts about 7 to 10 times longer than HSS ■ Available in 2-flute or 3-flute (varies by size) ■ Comes with a stopper ring ＝＝＝＝＝ For more details, please contact us＝＝＝＝＝ TEL 044-811-0065 FAX 044-811-0925 Contact: Kawaguchi, Kamimoto

  • Other cutting tools
  • End Mills
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
X5070 Blue Coating Carbide Solid End Mill G8A28

X5070 Blue Coating Carbide Solid End Mill G8A28

Ideal for dry cutting and high-speed cutting! Two-flute ball nose end mill for machining high-hardness materials.

We handle the blue-coated carbide solid end mill "X5070." The "G8A28 (cylindrical shank)" is a two-flute, ball-nose end mill designed for machining high-hardness materials. In addition to a newly developed substrate and coating combination suitable for dry cutting and high-speed cutting, it boasts excellent wear resistance. 【Features】 ■ For machining high-hardness materials ■ Suitable for dry cutting and high-speed cutting ■ Good surface finish ■ For high-precision machining ■ High wear resistance *For more details, please refer to the PDF document or feel free to contact us.

  • End Mills
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
X5070 Blue Coating Carbide Solid End Mill G8A02

X5070 Blue Coating Carbide Solid End Mill G8A02

Excellent finish for the machined material! A 4-flute neck-type end mill designed for high-hardness materials.

We handle the blue-coated carbide solid end mill "X5070." The 'G8A02 (cylindrical shank)' is a 4-flute, neck-type end mill designed for high-hardness materials. Thanks to the newly developed material and coating, it is suitable for dry machining and high-speed cutting. 【Features】 ■ Designed for high-hardness materials ■ Suitable for dry machining and high-speed cutting ■ Excellent finish on the workpiece ■ Designed for high-precision machining ■ Enhanced wear resistance *For more details, please refer to the PDF document or feel free to contact us.

  • End Mills
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flat hole reamer (bag hole reamer)

Flat hole reamer (bag hole reamer)

Eliminate the instability of cutting discharge and dimensional accuracy of straight blades!

The "Flat Hole Reamer" is a bag hole reamer that can discharge chips to the rear due to its right spiral design. It has a bottom blade, which provides excellent straightness, and all diameters except for the 45° tip are effective. Additionally, the double structure of the boring blade (which prevents wobbling) and the finishing blade allows for high dimensional accuracy and excellent surface roughness without worrying about reamer allowances. 【Features】 ■ Capable of processing completely blind holes ■ Surface treatment on SP-ALLOY powdered high-speed steel *For more details, please download the PDF or feel free to contact us.

  • Reamer
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
YG-1 Heat-Resistant Alloy End Mill 'TitaNox-Power'

YG-1 Heat-Resistant Alloy End Mill 'TitaNox-Power'

A carbide end mill suitable for machining difficult materials such as titanium and Inconel!

"TitaNox-Power" is an end mill for heat-resistant alloys designed for heavy cutting with a high chip removal rate. It enables high-speed cutting through the synergistic effect of Y-coating and ultra-fine particle carbide substrate. Additionally, its double core design prevents chip clogging during groove machining. 【Features】 ■ High rigidity and good chip removal performance with a double core (unequal core thickness) ■ Vibration prevention with unequal division and unequal lead ■ Corner radius to prevent chipping ■ AlCr-based coating ■ Ultra-fine particle carbide substrate *For more details, please refer to the PDF document or feel free to contact us.

  • End Mills
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
X5070 Blue Coating Carbide Solid End Mill G8A36

X5070 Blue Coating Carbide Solid End Mill G8A36

High wear resistance! 2-flute, stub, corner radius, neck type end mill.

We handle the blue-coated carbide solid end mill "X5070." The 'G8A36 (cylindrical shank)' is a two-flute, stub, corner radius, neck-type end mill. The corner radius is effective in preventing chipping during high-speed cutting. 【Features】 ■ For machining high-hardness materials ■ Suitable for dry cutting and high-speed cutting ■ Good surface finish ■ Neck design suitable for deep groove machining ■ Effective in preventing chipping during high-speed cutting (corner radius) ■ High wear resistance *For more details, please refer to the PDF document or feel free to contact us.

  • End Mills
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
SUS Super Hard 4-Flute Solid High Helix End Mill

SUS Super Hard 4-Flute Solid High Helix End Mill

Low friction coefficient! Achieves good surface roughness even with SUS and SS material finishes!

The "SUS Super Hard 4-Flute Solid High Helix End Mill" is an end mill suitable for finishing stainless steel (SUS) and carbon steel (SS). Due to its low friction coefficient, it achieves excellent surface roughness not only for SUS but also for SS materials. It features an AlCr2O3 coating, with a hardness of 4000 Hv and a heat resistance temperature of 1100°C. 【Features】 ■ Medium-sized blade ■ Ideal for finishing stainless steel and SS ■ Low friction coefficient ■ Achieves good surface roughness for SUS and SS materials ■ Utilizes AlCr2O3 coating *For more details, please refer to the PDF document or feel free to contact us.

  • End Mills
  • Other cutting tools
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
X5070 Blue Coating Carbide Solid End Mill G8A47

X5070 Blue Coating Carbide Solid End Mill G8A47

Excellent finish of the machined material! 4-flute, corner radius, neck type end mill.

We handle the blue-coated carbide solid end mill "X5070." The 'G8A47 (cylindrical shank)' is a 4-flute end mill with corner radius and neck type. It is designed for high-hardness materials and is suitable for dry machining and high-speed cutting due to newly developed materials and coatings. 【Features】 ■ For high-hardness material machining ■ Suitable for dry cutting and high-speed cutting ■ Good surface finish ■ Neck type is suitable for deep groove machining ■ Corner radius is effective in preventing chipping during high-speed cutting ■ High wear resistance *For more details, please refer to the PDF document or feel free to contact us.

  • End Mills
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Conductive diamond coating service

Conductive diamond coating service

It is possible to decompose and synthesize substances that were difficult with conventional methods.

We offer conductive diamond coating services. Diamond is typically an insulator, but by doping it with boron, conductivity can be imparted while retaining the chemical stability, strength, and other characteristics of diamond, making it suitable for various applications. Additionally, due to its wide potential window, it can preferentially facilitate oxidation or reduction reactions of substances that are usually difficult to electrolyze, enabling the decomposition and synthesis of materials that were challenging with conventional methods. 【Application Range】 ■ Electrolytic synthesis ■ Electrolysis ■ Sensors *For more details, please download the PDF or feel free to contact us.

  • Company：DIAM
  • Price：Other
  • Other electronic parts
  • Processing Contract
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
CDM 90° Carbide 2-Flute Center Chamfer End Mill

CDM 90° Carbide 2-Flute Center Chamfer End Mill

An end mill capable of centering, chamfering holes, C chamfering, V-grooving, and side processing!

The "CDM 90° Carbide 2-Flute Center Chamfer End Mill" is an end mill with a tip angle of 90°. It is capable of centering, hole chamfering, C chamfering, V-groove processing, and side processing. By adopting a TiAlN coating, it achieves a hardness of 2800 Hv and a heat resistance temperature of 800°C. Additionally, the recommended materials for this product are SS, SC, SCM, SKD, and SUS. 【Features】 ■ 90° tip angle carbide 2-flute chamfer end mill ■ Capable of centering, hole chamfering, C chamfering, V-groove processing, and side processing ■ TiAlN coating (hardness 2800 Hv, heat resistance temperature 800°C) *For more details, please refer to the PDF document or feel free to contact us.

  • End Mills
  • Other cutting tools
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
PE Ultra Hard 4-Flute Solid High Helix End Mill

PE Ultra Hard 4-Flute Solid High Helix End Mill

Introducing end mills with a twist angle of 45° and a cutting edge tolerance of h8, ideal for steel and stainless steel!

The "PE Ultra Hard 4-Flute Solid High Helix End Mill" is an end mill suitable for steel and stainless steel. The recommended materials for this product are SS, SC, SCM, SKD (up to 50HRC), SUS, FC, and FCD. With the adoption of a TiSiN coating, it achieves a hardness of 3600Hv and a heat resistance temperature of 1100°C. *(Note: The 16mm and 20mm diameters have a TiAlN coating, hardness of 2800Hv, and heat resistance temperature of 800°C.)* The diameters available range from 3 to 20mm. 【Features】 ■ Medium size cutting length ■ Twist angle 45°, cutting edge tolerance h8 ■ TiSiN coating adopted ■ Recommended materials are SS, SC, SCM, SKD (up to 50HRC), SUS, FC, and FCD *For more details, please refer to the PDF document or feel free to contact us.*

  • End Mills
  • Other cutting tools
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Treadmill "FTW-210"

Treadmill "FTW-210"

A walking-only machine that can be accessed within 0.2 km! It allows for safe boarding and disembarking, as well as fall prevention.

The "FTW-210" is a treadmill suitable for senior fitness and rehabilitation. It features long handrails and a low frame for safe mounting and dismounting. The large emergency stop button is designed for easy access for both users and caregivers. Additionally, it is equipped with a heart rate measurement sensor on the long handrail and utilizes a manufacturer-specific AC motor designed to minimize troubles. 【Features】 - A walking-only machine that can be used from 0.2 km/h - Manufacturer-specific AC motor designed to minimize troubles - Easy operation with preset programs - Large display panel *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【Case studies now available】High-performance wet disperser 'ECM-AP'

【Case studies now available】High-performance wet disperser 'ECM-AP'

Introducing examples of dispersing machines that enable titanium oxide dispersion in a shorter time!

This case study presents an example of the effective use of the high-performance wet disperser "ECM-AP." 【Case Study】 <Challenge> ■ Although processing of high-transparency titanium oxide was being conducted, there was a desire for more efficient processing than the disk-type bead mill, which requires long operating hours. <Solution> ■ Operating with small beads (0.3mm) proved effective. The ECM-AP series employs an "accelerator" that allows for more efficient movement of small beads compared to the disk type. *For more details, please refer to the catalog or feel free to contact us.

  • Emulsifier/Disperser
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
X5070 Blue Coating Carbide Solid End Mill G8B59

X5070 Blue Coating Carbide Solid End Mill G8B59

4-blade, stub, corner radius, high feed! Increased strength due to the thick material at the bottom of the blade.

We handle the blue-coated carbide solid end mill "X5070." The 'G8B59 (cylindrical shank)' is a 4-flute, stub, corner radius, high-feed end mill. It offers excellent wear resistance when machining high-hardness materials and during high-feed processing. By increasing the thickness of the lower part of the bottom blade, it enhances body strength and suppresses chatter vibrations. 【Features】 - Excellent wear resistance when machining high-hardness materials and during high-feed processing - Increased strength due to the thick lower part of the bottom blade - High rigidity from a short flute length - Coating with excellent hardness and heat resistance - Long tool life during dry cutting *For more details, please refer to the PDF document or feel free to contact us.

  • End Mills
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Super Hard Ball End Mill Grinding Machine YN-08A・YN-08B

Super Hard Ball End Mill Grinding Machine YN-08A・YN-08B

We can regrind ball end mills. With our unique patented technology, we can also grind 0.5mm ball end mills.

The pole end mill is sharpened with two blades. Both HSS and carbide pole end mills can be resharpened. Resharpening can be done easily. 【Features】 - Unique patented technology allows for adjustment of the holder's angle - Stable sharpening possible with a patented bearing-integrated sharpening unit - Improved performance for long-term use

  • Plastic processing machines (cutting and rolling)
  • Special Processing Machinery
  • Steel
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Aqua REVO mill for stainless steel

Aqua REVO mill for stainless steel

Revolutionizing the world of manufacturing! Excellent chip removal properties, suppressing cutting resistance and processing heat.

The "Aqua REVO Mill for Stainless Steel" is a product that achieves high efficiency and long lifespan through overwhelming chip removal and cooling effects. It adopts a newly developed groove-shaped air flute. This design suppresses contact with chips, improves chip discharge, and further reduces cutting resistance. Even when increasing cutting speed and feed rate, there are no scratches from chip entanglement, resulting in a stable machined surface. Additionally, it has minimal chipping and wear, ensuring a long lifespan. 【Features】 ■ Newly developed groove-shaped air flute ■ Cooling grooves suppress contact between chips and the cutting face ■ Exhibits the cooling effect of the coolant, reducing machining heat on the tool cutting edge ■ Achieves a high-quality machined surface without chip entanglement ■ Excellent chip discharge, minimal chipping and wear, and long lifespan *For more details, please refer to the PDF document or feel free to contact us.

  • End Mills
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Easy Nano Explosion-Proof Type

Easy Nano Explosion-Proof Type

It will be an explosion-proof specification for RMB. It is a batch-type bead mill that can accommodate vessel capacities from 100ml to 100L class.

The batch-type bead mill "BSG" is an explosion-proof model of the Easy Nano RMB. It can accommodate volumes from 100ml to 100L class. The small model allows for easy removal of the entire vessel, while the medium and large models feature a stirring shaft that can be raised and lowered, and the vessel is designed to be tiltable for complete recovery of the processing liquid, making cleaning extremely easy. Additionally, by incorporating a vacuum device, it enables degassing and vacuum dispersion grinding, and for low to medium viscosity liquids, it is also possible to transfer the product to the tank under vacuum. For more details, please contact us.

  • Other powder equipment
  • Crusher
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
End mill processing case for standing walls: "Tool Steel 40 CrMnMoS 86"

End mill processing case for standing walls: "Tool Steel 40 CrMnMoS 86"

Significantly improved efficiency possible! Case study of tool steel finishing using end mills for vertical walls.

We would like to introduce a case study on "Machining Tool Steel (40 CrMnMoS 86) using a vertical wall end mill." The cutting tool used is the "HAM40-1571 finishing end mill," with a blade diameter of φ25mm and 8 blades, showcasing both rough and finishing machining. 【Case Details】 ■ Material: Tool Steel (40 CrMnMoS 86) ■ Material Tensile Strength: 1100N/mm² ■ Challenge: Finishing ■ Machining Machine: 100V hi-dyn ■ Adapter: SK 40 For more details, please refer to the catalog or feel free to contact us.

  • End Mills
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Onboard Tool Measurement System

Onboard Tool Measurement System

Manage cutting shapes with the on-machine system! A measuring device that enables high-precision mold processing.

The "On-machine Tool Measurement System" is a system for managing the cutting conditions, which is crucial for high-precision mold processing. It can accurately measure and manage the cutting shape of large-diameter tools (up to φ30mm) on the machine. The adoption of imaging-type tool measurement devices using parallel light transmission illumination has faced challenges due to its limited applications. With the implementation of rotational position prediction and high-speed shutter technology, it is possible to capture images of the rotating tool at any desired rotational position. 【Features】 ○ On-machine management ○ High-precision measurement ○ Imaging during rotation ○ High-speed shutter adoption ○ Reduction of processing errors For more details, please contact us or download the catalog.

  • Other measurement, recording and measuring instruments
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
End Mill Machining Case for Vertical Walls: "Machining of S45C (C 45)"

End Mill Machining Case for Vertical Walls: "Machining of S45C (C 45)"

Significantly improved efficiency possible! Example of finishing machining S45C using end mills for vertical walls.

Here is a case study of machining 'S45C (C 45)' using a vertical wall end mill. The cutting tool used is the "HAM40-1571 vertical wall end mill," with a blade diameter of φ20mm and 8 blades, for rough machining, finishing, and bottom surface finishing. 【Case Details】 ■ Material: C 45 ■ Material tensile strength: 650N/mm² ■ Challenge: Pocket machining ■ Machining machine: HURON K2X10 ■ Adapter: HSK 63 For more details, please refer to the catalog or feel free to contact us.

  • End Mills
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
End Mill Processing Example for Vertical Walls: "Tool Steel X33CrS16"

End Mill Processing Example for Vertical Walls: "Tool Steel X33CrS16"

Significantly improved efficiency possible! Case study of tool steel finishing using end mills for vertical walls.

We would like to introduce a case study on "Machining Tool Steel (X33CrS16) using a Tapered End Mill." The cutting tool used is the "HAM40-1571 Finishing End Mill," with a diameter of φ20mm and 8 cutting edges, showcasing both intermediate and finishing processes. 【Case Details】 ■ Material: Tool Steel (X33CrS16) ■ Material Tensile Strength: 950-1100N/mm² ■ Challenge: Hole finishing using a magnetic chuck ■ Machining Machine: Quaser MF 184 P ■ Adapter: SK 40 BigPlus For more details, please refer to the catalog or feel free to contact us.

  • End Mills
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Twist chamfer mill 90° carbide end mill for surface chamfering.

Twist chamfer mill 90° carbide end mill for surface chamfering.

Introducing a lineup of non-coated and coated types! Here are end mills for processing!

We would like to introduce our product, the "Twist Chamfer Mill 90° Carbide Tipped End Mill" that we handle. We offer both non-coated and coated types in our lineup. The recommended cutting speeds (m/min) are 85 to 175 for aluminum alloys, 40 to 90 for general steel, and 30 to 60 for stainless steel. Additionally, we also provide the "BCM/WCM Series" specifically for surface and back chamfering, as well as the "BC/BCC Series" specifically for back chamfering. *For more details, please refer to the PDF document or feel free to contact us.

  • Other work tools
  • Work tools
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Treadmill for Facilities: T655MJ

Treadmill for Facilities: T655MJ

With "Safe start TM," the minimum speed is 0.2 km/h, making it suitable for use in rehabilitation.

The T655MJ is a treadmill equipped with reverse running and reverse incline modes, as well as long handrails as standard features. It is powered by a 5HP AC servo motor. Thanks to SportsArt's special technology, it excels in stability at low speeds and is effective in saving electricity. Additionally, the inclusion of the "My Flex Plus TM" (deck cushioning system) reduces the strain on joints such as the knees and ankles. 【Features】 ■ Standard equipped with reverse running and reverse incline modes ■ Standard equipped with long handrails ■ Passes the leakage current test with a European medical standard of 0.3mA or less ■ Excellent stability at low speeds and effective in saving electricity ■ The inclusion of "My Flex Plus TM" reduces strain on joints such as the knees and ankles *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Kemutec Division Comprehensive Catalog

Kemutec Division Comprehensive Catalog

A wide range of products, including dispersers, continuous centrifuges, and straight barrel press-type centrifugal dehydrators, are featured!

Hiroshima Metal & Machinery Co., Ltd. pursues crushing, dispersion, mixing, dehydration, concentration, and filtration technologies, continuously evolving and contributing to the efficiency of processes across various industries. In this catalog, we introduce the "Ultra Apex Mill," a dispersion machine compatible with nano-scale applications, ranging from 150cc lab machines to production machines, as well as the continuous centrifuge "Centrus" and the direct cylinder pressure centrifugal dehydrator "Wizard Press." At our Hiro Production Facility, we have experimental machines for each device to meet our customers' needs. Please utilize them for the development of new processes, rationalization of existing equipment, and improvement of product quality. [Featured Products] ■ Ultra Apex Mill (Dispersion Machine) compatible with 0.03mm beads ■ Super Apex Mill (Milling Machine) compatible with 0.1mm beads ■ Apex Mill (Crushing Machine) compatible with 0.5mm beads ■ Apex Lab (Dispersion and Crushing Machine) for laboratory use, tabletop model ■ Centrus (Continuous Centrifuge) ■ Pusher (Continuous Centrifuge) *For more details, please refer to the PDF document or feel free to contact us.

  • centrifuge
  • Other food machinery
  • Wastewater/wastewater treatment equipment
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to MILL

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.