We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Metal fittings.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Metal fittings(20mm) - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

Last Updated： Aggregation Period:Mar 18, 2026～Apr 14, 2026
This ranking is based on the number of page views on our site.

Metal fittings Product List

31～60 item / All 91 items

Displayed results
Formwork Release "Horizontal Batten Floating Support Bracket (Compatible with φ50/60 Square)"

Formwork Release "Horizontal Batten Floating Support Bracket (Compatible with φ50/60 Square)"

A strong ally for formwork alignment! With the adjustable supporter, you can push and pull steel pipes.

This product is a φ50/60 square-compatible lateral batten floating stop fitting that can easily and quickly integrate formwork and steel pipes. Insert it from the top of the single pipe into the U-pin of the formwork, and once you hit the wedge, it is fixed in place. It will not float even when pressed by a supporter. 【Features】 ■ φ50/60 square-compatible ■ Integrates formwork and steel pipes ■ Can press the joints of the steel pipes with a supporter ■ Will not float even when pressed by a supporter ■ Allows pushing and pulling of steel pipes with a flexible supporter *For more details, please refer to the PDF document or feel free to contact us.

  • Other work tools
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Just push it in! New saddle 'Insert Clip'

Just push it in! New saddle 'Insert Clip'

The Insert Clip series was born from a thorough understanding of all on-site operations! It has innovatively evolved in reliability and work speed.

The "Insert Clip" can be easily installed by anyone with just one push. The pilot hole is standardized to 6mm for all products, which speeds up the working time compared to before. There is no need to change plugs depending on the counterpart materials, allowing compatibility with a wide range of materials. The Insert Clip was developed based on a thorough understanding of various on-site tasks. 【Features】 ■ The pilot hole is standardized to 6mm for all products, allowing for efficient work. ■ Just push it in and it's done—it's that easy! ■ It has elasticity, allowing for compatibility with 2-3 sizes, making it economical. ■ Only a drilling tool is needed, making work five times faster than usual. ■ With a pull-out load of over 20kg, it's reliable! ■ Can be removed and reused. 【Applications】 ■ Plumbing: Suitable for coated resin pipes, sheath pipes, resin pipes, etc. ■ SP Firefighting Equipment: Supports Helmex, E-Lock-SP, HTSP. ■ Gas Equipment: Targets gas flex pipes and sheath pipes, as well as cable management for gas water heaters. ■ Electrical Equipment: Supports CD and PF pipes for floor-mounted installations, as well as cables, CD, PF pipes, and cable supports in shaft rooms. *For more details, please refer to the PDF document or feel free to contact us.

  • Other consumables
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Seismic measures for housing: Retrofit anchor bolts 'Foundation Metal'

Seismic measures for housing: Retrofit anchor bolts 'Foundation Metal'

Existing building hardware: Measures against shaking from earthquakes, typhoons, and wind! Reinforcement of joints in existing buildings is possible.

The "Build Arm Series" is a wooden house joint reinforcement hardware designed to strengthen existing buildings. This series can be used for existing structures. It can be utilized for disaster and earthquake countermeasures such as typhoons, strong winds, and earthquakes, as well as for opportunities in rebuilding and reinforcing traditional houses. 【Features】 - It is a retrofit type hardware that replaces conventional anchor bolts, securing the foundation and the base. - It prevents the base from lifting and shifting from the foundation due to external forces such as earthquakes. - It has a height adjustment function that can accommodate height differences of 0 to 20 mm. - The surface treatment of the hardware body uses zinc plating, eliminating concerns about rust due to moisture. We also offer L-shaped metal, foundation metal, connector metal, base metal, and hold-down hardware. *For more details, please refer to the PDF document or feel free to contact us.

  • Other safety and hygiene products
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
ProSeven Seismic Mat / Dedicated Seismic Fittings

ProSeven Seismic Mat / Dedicated Seismic Fittings

Protect equipment and lives from major earthquakes! Why not consider simple and reliable earthquake measures?

The "Pro Seven Seismic Mat" is a special gel (urethane elastomer) that possesses both solid and liquid properties. With excellent flexibility and adhesive strength, it responds to various vibrations. Even in the event of a major earthquake with a seismic intensity of 7, it prevents damage and tipping of important equipment caused by shaking. By using "dedicated seismic brackets" for securing equipment, it demonstrates outstanding effectiveness against earthquakes. 【Features】 ■ Passed seismic intensity 7 tests (with acceleration of 1000 gal or more) ■ Easy installation by simply laying it down, and it is removable ■ Can be cleanly peeled off if removed slowly ■ Responds to shaking in all directions: front-back, left-right, up-down ■ Can be attached to materials that can hold tape *For more details, please refer to the PDF document or feel free to contact us.

  • Other safety and hygiene products
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Processed Parts Results] Retractable Fittings

[Processed Parts Results] Retractable Fittings

Shortest half-day estimate / Introduction of achievements in sheet metal processing parts! From one piece of various types and small quantities! We will provide an estimate for processed parts in as little as half a day.

Agency Assist has a track record of processing in the prototype and development fields across various industries. We can handle a wide range of materials, including aluminum, iron, stainless steel, brass, and resin. This time, we would like to introduce our processed part "Retractable Fitting" made through sheet metal, laser, and welding. 【Features】 ----------------------------------------------------------- Part Name: Retractable Fitting Material: Stainless Steel (SUS304) Processing Method: Sheet Metal Processing Size: x46mm × y20mm × z18mm Surface Treatment: None ----------------------------------------------------------- "Features of Agency Assist" - We provide estimates for processed parts in as little as half a day. - We accommodate everything from single-item processing to small lots of various types. - We handle everything from surface treatment to hardening, polishing, and precision inspection. We can handle everything from metals to resins! Trust us with your prototype and development part machining. ☆ Please feel free to contact us for a quote comparison first! ☆

  • Processing Contract
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
VESA 75mm/100mm compatible adjustable wall mount bracket [ADM02]

VESA 75mm/100mm compatible adjustable wall mount bracket [ADM02]

Convenient for wall mounting small monitors! VESA standard compatible adjustable angle wall mount bracket.

This is an angle-adjustable wall mount compatible with VESA 75x75mm and 100x100mm. It features a built-in level at the bottom of the unit for easy horizontal alignment. For more details, please contact us.

  • bracket
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hook and loop fastener mounting hardware with screws

Hook and loop fastener mounting hardware with screws

This is a product that includes a hook-and-loop fastener (binding Velcro), mounting hardware, and screws as a set.

The hook-and-loop fastener (bonding Velcro) can be freely adjusted in length. It can be fixed with the included tapping screws, allowing it to be attached to wood, walls, and more.

  • Other packaging materials
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Reinforcement Joint Fitting 'I-Plate Black/Off-White'

Reinforcement Joint Fitting 'I-Plate Black/Off-White'

An accent for connecting boards and boxes! Joint fittings that enhance the space.

The "I-Plate Black and Off-White" from Dairi is used to connect two boards in parallel. It also serves as an accent for joining boards or boxes. Using a white base creates a natural taste atmosphere, while incorporating black easily adds a rugged or junky feel. 【Features】 ■ Used to connect boards in parallel ■ Accent for joining boards or boxes ■ A natural taste when based on white ■ Incorporating black creates a rugged and masculine style *For more details, please feel free to contact us.

  • nut
  • bolt
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Small diameter column mounting hardware for machinery

Small diameter column mounting hardware for machinery

Can be installed safely and easily without removing the nut! Compatible with pitches of 120mm and 170mm.

This product is a mounting bracket for small diameter poles that can be securely attached with an M12 bolt. It is applicable for 40A to 90A (φ48.6 to φ101.6) and can be installed safely and easily without removing the nut. The pitch for the mounting holes (M8) accommodates 120mm and 170mm. It is a common bracket for both top and bottom. 【Features】 ■ Can be securely attached with an M12 bolt ■ Can be installed safely and easily without removing the nut ■ The pitch for the mounting holes (M8) accommodates 120mm and 170mm ■ Can be installed for 40A to 90A (φ48.6 to φ101.6) ■ Common bracket for both top and bottom *For more details, please refer to the PDF document or feel free to contact us.

  • Other work tools
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wall mount bracket for LCD monitor 'HF-402WM'

Wall mount bracket for LCD monitor 'HF-402WM'

Easy-to-install wall mount bracket for LCD monitors.

A simple wall-mounted bracket that only requires attaching the plate to the wall and securing the dedicated color to the back of the monitor with four screws.

  • bracket
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
JIS-EIA conversion fitting

JIS-EIA conversion fitting

This is an adjustment bracket (U-shaped metal fitting) for mounting EIA standard equipment onto JIS standard mounting rails (mounting angles).

This is a bracket that converts IS standard mounting rails to EIA standard. It is an adjustment bracket (U-shaped bracket) for mounting EIA standard equipment onto JIS standard mounting rails (mounting angles). You can specify the U number, offset length, and it can be custom-made starting from one set.

  • Other PCs and OA equipment
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Reinforcement hardware for wooden houses [Strong wind and earthquake measures]

Reinforcement hardware for wooden houses [Strong wind and earthquake measures]

It is a fitting for existing buildings. It is also suitable for areas without firebracing foundations or anchor bolts. It can be used for reinforcement with nails or mortise and tenon joints.

The "Build Arm Series" that we handle can be installed in existing buildings and is a low-cost reinforcement hardware for wooden houses that provides measures against strong winds and earthquakes. Some products in our lineup feature a surface treatment with zinc plating that is resistant to moisture and rust. Currently, we are distributing materials that include data from compression and tensile tests for each product. You can view them immediately via "PDF Download." 【Features of Listed Products】 ■ L-shaped Metal AZ/CZ/II EZ - Contributes to preventing the columns from falling out due to twisting phenomena in the floor. ■ Foundation Metal BZ - Prevents uplift of the foundation and displacement from the base due to earthquakes, etc. ■ Tusk Metal TP/Foundation Metal DP - Prevents damage to joints caused by vertical and horizontal shaking due to strong winds and earthquakes. ■ Ease Guard NS-21 - Integrates the foundation, base, and columns from the outside of the building to prevent joint disengagement.

  • Other safety and hygiene products
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wall mount bracket for LCD monitors 'HF-30C'

Wall mount bracket for LCD monitors 'HF-30C'

This is a wall mount bracket for LCD monitors that can accommodate a maximum pitch of 420×310mm.

■Supports a maximum pitch of 420×310mm ■Monitor angle is adjustable (0° to -15°)

  • bracket
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Machine mounting bracket

Machine mounting bracket

By changing the band, it can be installed from φ100 to φ410! Here is an introduction to the common fittings for both top and bottom.

This product is a mounting bracket compatible with equipment that can be installed with a diameter of φ100 to φ410. By changing the band, it can be installed with a diameter of φ100 to φ410, and the pitch of the mounting holes (M8) is compatible with 120mm and 170mm. It is a common mounting bracket for both the upper and lower parts. 【Features】 ■ Can be installed with a diameter of φ100 to φ410 by changing the band ■ The pitch of the mounting holes (M8) is compatible with 120mm and 170mm ■ Common bracket for both upper and lower parts *For more details, please refer to the PDF document or feel free to contact us.

  • Other work tools
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Signboard mounting hardware for hanging signs.

Signboard mounting hardware for hanging signs.

Just hang it to secure the sign.

■Just hang it on the signboard! You can hang sandbags, iron weights, etc. to secure the signboard. Easy to carry and can be stored compactly.

  • Other work tools
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Craft THE Vacuum Bottle Cooler (Sake/Wine)

Craft THE Vacuum Bottle Cooler (Sake/Wine)

Delicious sake and wine. A bottle cooler that doesn't need ice water.

This product is a bottle cooler with a vacuum double structure, allowing it to maintain coldness without the need for ice water. It is smart and stylish, taking up little space on the table. Since ice water is not required, important labels are less likely to get damaged, and you can enjoy it without worrying about water droplets falling from the bottle. 【Features】 ■ Vacuum double structure ■ Stress-free without worrying about dripping water ■ Labels won't get soaked ■ Space-saving *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Craft THE Vacuum Bottle Cooler (Sake)

Craft THE Vacuum Bottle Cooler (Sake)

Stress-free without worrying about dripping water! Vacuum double-structured bottle cooler.

This product is a smart and stylish bottle cooler that doesn't take up much space on the table. Thanks to its vacuum double structure, it keeps things cold without needing to add ice water. It belongs to the "Ultra High Vacuum" category, which represents a very high vacuum (ultra-high vacuum) state and is only used in cutting-edge industries for industrial purposes. 【Features】 ■ Vacuum double structure ■ Stress-free, no worries about dripping water ■ Labels won't get soaked ■ Space-saving *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Standard Swivel for Chairs and Single Sofas 'SWIVEL STD'

Standard Swivel for Chairs and Single Sofas 'SWIVEL STD'

Reliable Standard! Typical swivel plate with proven 10,000-cycle durability. Specs available.

【Features】 ■ Ideal for chairs up to 500mm wide ■ Unichrome plating *For more details, please refer to the visual sheet and catalog available for PDF download. Feel free to contact us. Our online shop is here: https://koyoeng.base.shop/categories/5262598

  • Other machine elements
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
New Model: Single Pipe Pile [Scat 91]

New Model: Single Pipe Pile [Scat 91]

A single pipe pile that can be freely extended in length according to the ground and site conditions! Suitable for both manual driving with a hammer and machine driving!

A convenient single pipe pile that can be easily extended to various lengths according to the ground and site conditions! The "Skat 91" comes in three lengths: 1.0m, 1.5m, and 2.0m. By connecting these three types with various lengths of single pipe using our "Tsunagood," you can create single pipe piles of various lengths on-site, accommodating different ground conditions and site environments. Additionally, not only can it be machine-driven, but using our "Tataka (large, medium, small)" allows for driving without deforming the single pipe with a hammer. In any scaffolding environment, you can always keep both feet on the ground and safely drive long single pipe piles alone, enhancing safety and work efficiency while achieving cost reduction. 【Product Features】 - Eliminates the striking part, achieving lower costs for single pipe piles. - Using "Tsunagood" ensures it reaches the support layer reliably. - Various uses can be achieved by attaching rope fittings to the single pipe pile. - Extend! Connect! Pull! Stand up! The convenience of single pipe piles is enhanced. *For more details, please download the PDF or feel free to contact us.

  • furniture
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fixed hardware for device rack/M350L-608AC

Fixed hardware for device rack/M350L-608AC

Fixed hardware for equipment frame (Anchor bolt M8 type) / Part number M350L-608AC

Fixed brackets BCP countermeasure products that protect expensive machinery and equipment Passed earthquake test of seismic intensity 6 strong (conducted under the conditions below) Load limit for the object: 200kg Height limit for the object: Up to H1200mm

  • Other assembly machines
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Single pipe driving fitting [hammering - large]

Single pipe driving fitting [hammering - large]

No deformation of the single pipe even with powerful strikes! With a large target of 60mm, it ensures accuracy! It adopts a tapered structure that efficiently transmits striking force.

By enlarging the striking area, it is designed to make it easier to hit with a hammer. The supporting side below can work with peace of mind. You can confidently and powerfully drive in Skat 91 or single pipes with a hammer! 【Features】 ■ Outer diameter Φ48.6, thickness 2.4mm specification ■ The target is large, making it easy for the hammer to hit ■ Fewer mis-hits with the hammer, providing reassurance for the person supporting ■ The heads (striking parts) of single pipe piles [Skat 91] and single pipe do not deform ■ Single pipes can also be driven in directly ■ No rebound during striking ■ Treated with hardening processing for long-term use *For more details, please download the PDF or feel free to contact us.

  • furniture
  • Other work tools
  • Other safety and hygiene products
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Compatible with combined flat roofs, snow stop bracket 'Combined Hyper Lock'

Compatible with combined flat roofs, snow stop bracket 'Combined Hyper Lock'

Overwhelming construction speed. Place it, tighten it, that's it.

"Fitting Hyper Lock" is a snow stop bracket compatible with flat roofs. It adopts a footed structure that pursues workability and stability, significantly improving work efficiency and leading to a reduction in construction time. Due to its lightweight and compact design, it is easy to transport on construction sites, allowing for smooth installation. You can choose from various colors to match the appearance of the roof. [Features] - Improved work efficiency - Reduced construction time - Lightweight and compact - Smooth installation *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
"Be-Max" fittings for layered folding plates.

"Be-Max" fittings for layered folding plates.

A bracket for stacked folding plates that allows for the fixation and grounding of fittings simultaneously with module installation!

"Be-Max" is a hardware designed for overlapping folded plates, achieving an industry-leading gap of just 5mm between the upper and lower panels. It is compatible with various modules and is suitable for residential and industrial use in garages, stores, warehouses, and more. 【Compatible Modules】 ■ Flangeless Type ■ P-Type Flange Type ■ M-Type Flange Type *For more details, please download the PDF or feel free to contact us.

  • Solar power generator
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Simple flat bracket/LP-2

Simple flat bracket/LP-2

This is a connector fitting for the PS series!

This is a connecting fitting for the PS series. It allows for simple two-point fastening. It contributes to construction in situations where the need for bolt fastening is minimal. *For more details, please download the catalog.

  • Other machine elements
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Connection fittings for securely joining single pipes [Massgood - Straight type]

Connection fittings for securely joining single pipes [Massgood - Straight type]

It is a single pipe joint that connects single pipes more securely as if they were one solid piece.

The "Massgood Straight Type" connects single pipes firmly and straight with fewer components. Even when bolts are tightened, the single pipes do not deform, and there is no loosening, play, or settling at the connection points. ~Features of the Connection Fitting [Massgood Straight Type]~ ■ There are two types available: for single pipes with an outer diameter of 48.6mm and a thickness of 2.4mm, and for those with an outer diameter of 48.6mm and a thickness of 1.8mm. ■ There is no loosening, play, or settling at the connection points. ■ Connects more quickly and firmly straight with fewer components, allowing one person to do it. ■ High-tension bolts are used. ■ The single pipes do not deform even when the bolts are tightened. *For more details, please download the PDF or feel free to contact us.

  • furniture
  • Other work tools
  • Other safety and hygiene products
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fixed hardware for device mounting frame (belt type) / Part number M350L-635B

Fixed hardware for device mounting frame (belt type) / Part number M350L-635B

BCP measures product to protect expensive machines and equipment, a belt type that can accommodate various tabletop surfaces regardless of the tabletop material.

BCP measures product to protect expensive machines and equipment Belt type compatible with various tabletop surfaces regardless of the surface material Load limit for the object: 200kg Height limit for the object: up to H1200mm

  • belt
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Swivel Part 'SWIVEL 185 PITCH'

Swivel Part 'SWIVEL 185 PITCH'

Highest durability among swivels. Proven strength with 15,000-cycle test. Specs available

【Features】 ■ Ideal for chairs up to 800mm wide ■ Unichrome plating ■ Highest durability swivel plate *For more details, please refer to the visual sheet and catalog available for download in PDF. Feel free to contact us. Our online shop is here. https://koyoeng.base.shop/categories/5262598

  • Other machine elements
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Stainless steel wall-mounted bracket

Stainless steel wall-mounted bracket

"Made of stainless steel," making it ideal for outdoor use and medical settings.

Made of stainless steel, it is ideal for outdoor use and medical settings. The simple design allows for easy installation and angle adjustment. This stainless steel wall-mounted bracket is excellent in corrosion resistance, heat resistance, and strength, and is also easy to maintain. It has a load capacity of 6 kg and can be installed either vertically or horizontally.

  • LCD display
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Metal fittings

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.