We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Metal fittings.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Metal fittings(20mm) - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

Last Updated： Aggregation Period:Mar 18, 2026～Apr 14, 2026
This ranking is based on the number of page views on our site.

Metal fittings Product List

61～90 item / All 91 items

Displayed results
Snow stop brackets for solar panels "Snow Truss"

Snow stop brackets for solar panels "Snow Truss"

Snow prevention brackets for solar panels that prevent snow from falling off vigorously! By gradually shedding snow, it suppresses snow sliding, snow accumulation, and icicle formation!

The snow stop hardware "Snow Truss," developed specifically for solar panels, prevents sliding snow from the glass surface of solar panels, which are prone to snow sliding. The snow that is caught is finely divided by a net, gradually releasing the snow to suppress the occurrence of snow avalanches, snow drifts, and icicles. While the image may be that "snow stops = snow country," this product is particularly recommended for areas where snow only falls once every few years. ● Avalanche Prevention Prevents sliding snow from solar panels and suppresses the occurrence of snow avalanches, snow drifts, and icicles. ● Snow Damage Prevention Prevents troubles caused by falling snow (such as damage to neighbors' carports or vehicles). ● Height Increase Body height is 205mm. It effectively catches sliding snow from solar panels. ● Compact Design Can be installed in small spaces at the eaves (minimum installation area of 150mm). ● Compatible Roofs Horizontal roofing / Fitting type standing seam / Tile rods (without core wood) / Decorative slate / Flat tiles *For details, please request materials or view the PDF data from the download.

  • Other safety and hygiene products
  • others
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Safety fastening hardware for formwork steel plates "Double Plate"

Safety fastening hardware for formwork steel plates "Double Plate"

Safety, peace of mind, no welding NETIS registered: KT-200095-A

The double plate is one of the patented examination items, which involves tightening a plate with a "safety pin" using bolts and driving it in with a hammer, allowing it to bite into the steel plate and control the "opening, shifting, and rattling" of the plate. By securely fixing the steel plate with the double plate, it prevents serious accidents caused by the rattling of the steel plate due to cutting the welded sections, as was the case with traditional methods. The double plate is safe and easy to install, requires no welding, and therefore does not emit CO2 during welding, making it environmentally friendly. It is a construction site steel plate fastening safety device that does not incur repair costs upon the return of the steel plate. *Rental options are also available.

  • others
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Aluminum welding

Aluminum welding

Interior goods shelf fixing hardware

This is a store fixture made from aluminum material (A5052P) with a thickness of 2.0mm. The main process starts with punching, followed by pre-processing and welding. After shaping is completed, anodizing treatment is performed, followed by final inspection. This product is used as a fixing fixture for product shelves in an interior goods store. The production time, including anodizing treatment, is approximately 2 to 3 days based on a lot size of 1 to 100.

  • others
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Seismic reinforcement fittings for concrete block walls, "FIT Power" Type 12.

Seismic reinforcement fittings for concrete block walls, "FIT Power" Type 12.

Can be installed even in narrow areas like densely populated urban residential areas! Seismic reinforcement brackets that can achieve seismic retrofitting in a short period with minimal construction.

"FIT Power" is a seismic reinforcement fixture such as a concrete block wall that replaces retaining walls. It limits the maximum protrusion of the site-side angle post to approximately 65mm, allowing for passage even after installation, thus maintaining convenience in narrow or densely populated residential areas. Additionally, it can be tightened by a single worker from the site side, enabling a reduction in construction time. FIT Power Type 12 is compatible with block walls of H1,200mm from the road surface. *We have models available for block walls ranging from H1,200mm to H1,800mm. 【Features of FIT Power】 ■ Lock bolt pile foundation method - Ground friction force is seven times the weight - Shortened construction period and cost reduction ■ Round head bolts prevent free spinning ■ Design that maintains convenience even in narrow spaces - Residents can pass through after installation - Component weight manageable by one person ■ Demonstration experiments conducted under the guidance of the Faculty of Engineering at Gifu University ■ Patent obtained as "Reinforcement structure and reinforcement members for walls" ■ Certified as a recommended disaster prevention product by the Japan Disaster Prevention Safety Association *For more details, please refer to the PDF materials or feel free to contact us.

  • Anti-vibration, earthquake-proof, vibration-isolating devices
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Reinforcement Fitting "KLB200-WF/BF"

Reinforcement Fitting "KLB200-WF/BF"

Powder coating finish! Products suitable for installation on three-sided and two-sided walls.

The "KLB200-WF/BF" is a reinforcement bracket that can be used in combination with L-shaped angles. We offer color variations in white and black. Please ensure that a substrate is installed in the areas where screws will be driven. Feel free to contact us when placing an order. 【Specifications】 ■ Finish: Powder-coated finish ■ Size: 40×40×200(mm) ■ Color: White, Black *For more details, please download the PDF or feel free to contact us.

  • Office furniture
  • others
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Seismic reinforcement hardware Kobot

Seismic reinforcement hardware Kobot

Seismic reinforcement hardware Kobot

The three-dimensional seismic reinforcement cobot... Until now, the reinforcement of houses has focused primarily on "strength" in specific directions using thick iron fittings. 【Features】 ○ The rounded shape of the cobot disperses and absorbs forces such as vertical shaking, horizontal shaking, and twisting. It is an ideal shape to counteract forces. ○ After repeated experiments, the optimal plate thickness (t=2.0mm) has been carefully determined. The cobot provides solid reinforcement for wooden houses. ○ The brace mounting hole set in the center of the cobot's rear allows for free rotation during connection. Therefore, there is no eccentricity. ○ The installation of the cobot body is easy with dedicated stainless coach screws, which also shortens construction time. ● For other functions and details, please download the catalog.

  • Other work tools
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Opening and closing hardware "ECONO Catch"

Opening and closing hardware "ECONO Catch"

Compatible with thick furniture doors with a stroke of 27.5mm!

"ECONO Catch" is a closing hardware that allows for a flat door design without the need for knobs or handles. It features an adjustment mechanism that allows for front and back adjustments even after installation. Additionally, the push release amount is 1.5 to 2.0 mm, minimizing the gap of the door. 【Lineup】 ■YJ-EKB (Black) ■YJ-EKW (White) *For more details, please download the PDF or feel free to contact us.

  • Other machine elements
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultra-thin TV wall mount bracket

Ultra-thin TV wall mount bracket

The ultra-thin arm LED TV mount is a patented product made from aluminum alloy materials with a stylish design. It is the perfect choice for creating space.

The AE211 is a newly developed product, featuring an ultra-thin LED TV mount series with a minimum distance of 35mm from the wall, compatible with VESA 100x100/75x75mm. The ultra-thin arm LED TV mount is a patented product made from aluminum alloy, offering a stylish design. It is the perfect choice for creating space.

  • Company：高誠
  • Price：Less than 10,000 yen
  • LED Module
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Terminal Fitting "VIP Cobra Hook Eye Type VCOH"

Terminal Fitting "VIP Cobra Hook Eye Type VCOH"

This is a hook with a chain call diameter of 4 to 16 mm and a basic working load of 0.5 to 8.0 tons.

The VIP Cobra Hook Eye Type VCOH is available in six types with a chain call diameter of 4 to 16 mm and a basic working load of 0.5 to 8.0 tons. In the ever-evolving work environment, the products used are constantly required to meet high standards of "safety," "durability," and "usability." RUD, which has been pursuing further challenges and safety since its founding, will continue to evolve and accelerate in the work environment that is advancing rapidly. 【Specifications】 ○ Chain call diameter: 4 to 16 mm ○ Basic working load: 0.5 to 8.0 tons ○ Weight: 0.14 to 4.2 kg For more details, please contact us or download the catalog.

  • Other conveying machines
  • others
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Single pipe joint [Massgood - Adjustable type]

Single pipe joint [Massgood - Adjustable type]

While cutting down on labor hours and material costs, straighten the piles and assemble the single pipes vertically!

The "Massgood Adjustable Type" is a single pipe joint that vertically raises single pipes, such as the diagonally driven single pipe pile [Scat 91] and extension single pipes. High-tension bolts are used, and the single pipe does not deform even when the bolts are tightened. ~Features of the Single Pipe Joint [Massgood Adjustable Type]~ ■ Outer diameter Φ48.6, thickness 2.4mm specification ■ Even unskilled workers can raise single pipes vertically by themselves. ■ Effective in narrow spaces where there is no room to drive a disposal pile. *For more details, please download the PDF or feel free to contact us.

  • furniture
  • Other safety and hygiene products
  • Other work tools
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
York Fittings "YS-1"

York Fittings "YS-1"

When working on an inclined surface! It prevents the belt from tightening around the waist, allowing for easier work.

Fujii Electric Co. handles "yoke fittings." Using yoke fittings prevents the belt from tightening around the waist while working on slopes, allowing for easier work. [Features] ■ Prevents the waist from tightening on slopes ■ Allows for easier work *For more details, please refer to the PDF materials or feel free to contact us.

  • Other safety and hygiene products
  • Harness
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Seismic reinforcement fittings for concrete block walls, 'FIT Power' Type 16

Seismic reinforcement fittings for concrete block walls, 'FIT Power' Type 16

Can be installed even in narrow areas like densely populated urban residential areas! Seismic reinforcement brackets that enable earthquake resistance construction in a short period with minimal work.

"FIT Power" is a seismic reinforcement fixture such as a concrete block wall that replaces retaining walls. It limits the maximum protrusion of the angle support on the site side to about 65mm, allowing for passage even after installation, making it a convenient design for narrow lots and densely populated residential areas. Additionally, it allows a single worker to perform tightening work from the site side, enabling a reduction in construction time. The FIT Power Type 16 is compatible with block walls of H1, 600mm from the road surface. *We also have types available for block walls ranging from H1,200 to 1,800mm. 【Features of FIT Power】 ■ Lock bolt pile foundation method - Ground friction force is seven times the weight - Shortened construction period and cost reduction ■ Round head bolts prevent free rotation ■ Design that maintains convenience even in narrow spaces - Residents can pass through after installation - Component weight manageable by one person ■ Demonstration experiments conducted under the guidance of the Faculty of Engineering, Gifu University ■ Patent obtained as a "reinforcement structure and reinforcement member for walls" ■ Certified as a recommended product by the Japan Disaster Prevention Safety Association *For more details, please refer to the PDF materials or feel free to contact us.

  • Anti-vibration, earthquake-proof, vibration-isolating devices
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Seismic reinforcement fittings for concrete block walls, "FIT Power" Type 18

Seismic reinforcement fittings for concrete block walls, "FIT Power" Type 18

Can be installed in narrow areas such as densely populated urban residential areas! Seismic reinforcement brackets that enable earthquake resistance construction in a short period with minimal work.

"FIT Power" is a seismic reinforcement fixture such as a concrete block wall that replaces retaining walls. It keeps the maximum protrusion of the site-side angle post to about 65mm, allowing for passage even after installation, making it a convenient design for narrow lots and densely populated residential areas. Additionally, since tightening work can be done by one worker from the site side, it allows for a reduction in construction time. The FIT Power Type 18 is compatible with block walls of H1, 800mm from the road surface. *We have models available for block walls ranging from H1,200 to 1,800mm. 【Features of FIT Power】 ■ Lock bolt pile foundation method - Ground friction force is seven times the weight - Shortened construction time and cost reduction ■ Round head bolts prevent spinning ■ Design that maintains convenience even in narrow spaces - Residents can pass through even after installation - Component weight manageable by one person ■ Demonstration experiments conducted under the guidance of the Faculty of Engineering, Gifu University ■ Patented as "Reinforcement structure and reinforcement members for walls" ■ Certified as a recommended disaster prevention product by the Japan Disaster Prevention Safety Association *For more details, please refer to the PDF materials or feel free to contact us.

  • Anti-vibration, earthquake-proof, vibration-isolating devices
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Waterproof sheet non-penetrating hanging hardware "Sheet Gripper"

Waterproof sheet non-penetrating hanging hardware "Sheet Gripper"

By tightening the rebar, smooth and reliable construction is possible! [NETIS Registration Number: KT-190096-A]

The "Sheet Gripper" is a non-penetrating rebar support fixture that does not penetrate waterproof sheets. By tightening the rebar, smooth and reliable construction is possible. We offer the "Sheet Grip" for waterproof sheets with a thickness of 0.8mm and the "WT Gripper" for those with a thickness of 2.0mm. 【Features】 ■ NETIS Registration Number: KT-190096-A ■ Non-penetrating, does not penetrate waterproof sheets ■ Smooth and reliable construction is possible by tightening the rebar *For more details, please refer to the PDF document or feel free to contact us.

  • Other consumables
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
MIG Mid Glove Shortener

MIG Mid Glove Shortener

A fitting that allows for length adjustment in the middle of the chain!

Load capacity: 2.0 to 5.2 tons, Grade 10 Compatible chain wire diameters: 8mm, 10mm, 13mm The quick pin can be easily pushed in and turned to switch the lock ON/OFF. The chain can be shortened to any desired length, allowing for the balanced lifting of loads that are otherwise unbalanced.

  • Other work tools
  • Other consumables
  • Other safety and hygiene products
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Seismic reinforcement fittings for concrete block walls 'FIT Power' Type 14

Seismic reinforcement fittings for concrete block walls 'FIT Power' Type 14

Can be installed even in narrow areas like densely populated urban residential areas! Earthquake-resistant reinforcement brackets that can be constructed quickly and with minimal work for seismic retrofitting.

"FIT Power" is a seismic reinforcement fixture such as a concrete block wall that serves as an alternative to retaining walls. It limits the maximum protrusion of the angle support on the site side to about 65mm, allowing for passage even after installation, making it a convenient design for narrow lots and densely populated residential areas. Additionally, it can be tightened by a single worker from the site side, enabling a reduction in construction time. The FIT Power Type 14 is compatible with block walls of H1, 400mm from the road surface. *We also have models available for block walls ranging from H1,200 to 1,800mm. 【Features of FIT Power】 ■ Lock bolt pile foundation method - Ground friction force is seven times the weight - Shortened construction period and cost reduction ■ Round-headed bolts prevent free spinning ■ Design that maintains convenience even in narrow spaces - Residents can pass through even after installation - Component weight manageable by one person ■ Demonstration experiments conducted under the guidance of the Faculty of Engineering, Gifu University ■ Patented as a "reinforcement structure and reinforcement member for walls" ■ Certified as a recommended product for disaster prevention by the Japan Disaster Prevention Safety Association *For more details, please refer to the PDF materials or feel free to contact us.

  • Anti-vibration, earthquake-proof, vibration-isolating devices
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Eagle II Horizontal Roofing Series Snow Stopper Bracket

Eagle II Horizontal Roofing Series Snow Stopper Bracket

A smart shape that matches the roof. Increased blade strength with edge folding and a strong bead.

The "Eagle II Horizontal Roofing Series" is a snow stop bracket compatible with horizontal roofs. It features a smart form that matches the roof, with edge folding and a strong bead to enhance the strength of the wings. We offer a wide lineup suitable for both retrofit (existing buildings) and pre-installation (new construction) applications. You can choose from various colors to match the appearance of your roof. 【Main Specifications】 ■ Wings - Plate thickness: 1.6mm (stainless steel is 1.5mm) - Material: High corrosion-resistant steel plate, hot-dip galvanized, SUS304 ■ Feet - Plate thickness: 2.0mm - Material: High corrosion-resistant steel plate, hot-dip galvanized, SUS304 ■ Quantity 30 pieces *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Seismic reinforcement system hardware / Cobots

Seismic reinforcement system hardware / Cobots

The optimal earthquake measures for wooden houses! This groundbreaking seismic reinforcement hardware can disperse and absorb forces such as "vertical shaking," "horizontal shaking," and "twisting."

The "Kobot" is a revolutionary three-dimensional seismic reinforcement hardware that can disperse and absorb forces such as "vertical shaking," "horizontal shaking," and "twisting." Until now, reinforcement for houses has focused primarily on the "strength" in specific directions using thick iron hardware. However, the way forces are applied during events like earthquakes is three-dimensional, making "strength" in a specific direction insufficient. The solution to this challenge is the "three-dimensional seismic reinforcement hardware/Kobot," which has an ideal shape to counteract forces. 【Features】 - Disperses and absorbs forces such as vertical shaking, horizontal shaking, and twisting. It has an ideal shape to counteract forces. - After repeated experiments, it is set to the optimal plate thickness (t=2.0mm). The Kobot provides solid reinforcement for wooden houses. - The brace mounting hole set in the center of the Kobot's rear allows for free rotation during connection, eliminating eccentricity. - Installation of the Kobot body is easy with dedicated stainless coach screws, reducing construction time. - The design of the house is not compromised even when the Kobot is exposed. *For other functions and details, please inquire or download the catalog.

  • Other work tools
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Connection and adjustment fittings "VIP Shackle VV-SCH/VC-SCH"

Connection and adjustment fittings "VIP Shackle VV-SCH/VC-SCH"

The pin rotates 360 degrees at all times! It is used to connect the chain and the fittings.

The VIP Shackle VV-SCH/VC-SCH is used to connect chains and fittings. The pin rotates 360 degrees at all times, preventing uneven wear. In the ever-evolving work environment, the products used are always required to meet high standards of "safety," "durability," and "usability." RUD, which has been pursuing further challenges and safety since its founding across a century, will continue to evolve and accelerate in the work environment. 【Features】 ○ The pin rotates 360 degrees at all times, preventing uneven wear ○ Chain nominal diameter: 6 to 16 mm ○ Basic working load: 1.2 to 22.4 tons ○ Self-weight: 0.1 to 5.9 kg For more details, please contact us or download the catalog.

  • Other conveying machines
  • others
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Connection and adjustment fittings "VIP Insulation Sling Set V-SIG"

Connection and adjustment fittings "VIP Insulation Sling Set V-SIG"

It prevents overcurrent from flowing into cranes and other equipment during welding operations while lifting.

The VIP Insulated Sling Set V-SIG is an insulated shackle compatible with 1,000V. It prevents overcurrent from flowing into cranes and hoists during welding operations while lifting. In the ever-evolving work environment, there is a constant demand for high standards of "safety," "durability," and "usability" in the products used. RUD, which has been pursuing further challenges and safety since its founding, will continue to evolve and accelerate in the work environment that spans over a century. 【Features】 ○ Insulated shackle compatible with 1,000V ○ Chain diameter: 6–16mm ○ Basic working load: 1.2–8.0 tons ○ Weight: 1.4–13.1kg For more details, please contact us or download the catalog.

  • Other conveying machines
  • others
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Roofing hardware

Roofing hardware

Details will be introduced using diagrams! Our company's structural hardware is also available for custom processing.

We handle "ridge fittings" for roofing materials. The details of this product are introduced using diagrams. In addition, we also offer "stainless ridge frames" that can be extended with joint pieces at a length of 6 shaku, as well as "tile fixing devices" made of high-quality stainless steel that do not corrode. 【Features】 ■ Types range from H-40 to 120mm ■ Custom processing is also available *For more details, please refer to the PDF document or feel free to contact us.

  • Processing Contract
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Japanese-style roof snow guard fittings "Wagata Fuugetsu" for tile roofs.

Japanese-style roof snow guard fittings "Wagata Fuugetsu" for tile roofs.

The beauty of curves that blends with harmony. Snow stop brackets with excellent design that match traditional Japanese tiles.

"Wagata Fuugetsu" is a snow stop fixture with excellent design that matches the beautiful curves and rich colors of traditional Japanese tiles. It harmonizes naturally with the Japanese tiles, resulting in a beautifully finished overall appearance of the roof. We offer a lineup suitable for both retrofitting (existing buildings) and new installations. You can choose from various colors to match the appearance of your roof. 【Product Specifications】 ■Material: SUS304 ■Plate Thickness: Wing = 1.5mm, Foot = 2.0mm *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Directly Attached Ceiling Base Metal Fitting "J-M Fitting"

Directly Attached Ceiling Base Metal Fitting "J-M Fitting"

Introducing flexible and low-cost ceiling system parts that meet your needs!

The "J-M Bracket" is a direct-attachment ceiling substrate bracket that can use conventional lightweight substrate materials, allowing for cost-effective installation of earthquake and wind pressure-resistant substrates. Installation can be performed while checking the marking position through the slit of the base bracket. Level adjustments can be made after temporarily placing the substrate on lip channel steel, just like with conventional lightweight substrates. Additionally, the method of attaching the bracket to the furring channel combines both hook and screw fastening, ensuring safe usage. 【Features】 ■ Flexible & Low Cost ■ Design of non-suspended earthquake and wind pressure-resistant ceilings is possible ■ Easy level adjustment (±10mm from the reference point) ■ Level adjustments can be made after temporarily placing the substrate on lip channel steel ■ Installation can be performed while checking the marking position through the slit of the base bracket ■ The method of attaching the bracket to the furring channel combines both hook and screw fastening for safety *For more details, please refer to the PDF document or feel free to contact us.

  • Other metal materials
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Dome mirror of curve mirrors, safety mirrors, and security mirrors.

Dome mirror of curve mirrors, safety mirrors, and security mirrors.

Covering 360° complex spaces! Convenient for installation in factories and warehouses! A free rental system is also available!

The "Dome Mirror" of 【Curve Mirror・Safety Mirror・Security Mirror】 is a mirror that covers complex spaces in 360°. It covers not only intersections but also blind spots created by cargo and other factors. It can be directly mounted to the ceiling or hung with a chain, making it convenient for installation in factories and warehouses. 【Features】 ■ For indoor use only ■ Covers complex spaces in 360° ■ Can be directly mounted to the ceiling or hung with a chain ■ Large type ideal for factories and warehouses *For more details, please refer to the PDF document or feel free to contact us. *We also offer a free rental system.

  • mirror
  • Other safety and hygiene products
  • Other security and surveillance systems
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Security mirror / safety mirror (acrylic) clip type

Security mirror / safety mirror (acrylic) clip type

For store security mirrors, improving customer service, and checking within factories! Lightweight and shatter-resistant. It’s a clip type, so no drilling is required for installation, and the angle is adjustable.

Security mirrors and safety mirrors are made of acrylic, making them lightweight, shatter-resistant, and easy to install. They come in a clip type, so no drilling is required for easy installation. The angle can also be adjusted freely, making them very popular mirrors. Being made of acrylic, they are bright and ideal for indoor use. *For more details, please refer to the PDF document or contact us.*

  • 防犯クリップ.jpg
  • 白枠.jpg
  • 青枠.jpg
  • mirror
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Security mirror / safety mirror (acrylic) space mirror clip type

Security mirror / safety mirror (acrylic) space mirror clip type

For store security mirrors, improving customer service, and checking inside factories! Lightweight and shatter-resistant. No need for holes due to the clip, adjustable angles to prevent head-on collisions.

Security mirrors and safety mirrors are made of acrylic, making them lightweight, shatter-resistant, and easy to install. They are clip-type, so no drilling is required for installation, and they can be easily adjusted to any angle, making them very popular mirrors. Being made of acrylic, they are bright and ideal for indoor use. *For more details, please refer to the PDF document or contact us.*

  • F-30B.jpg
  • F-30C.jpg
  • mirror
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
DIN Rail Mounting Bracket DH Holder (Socket Mounting Type)

DIN Rail Mounting Bracket DH Holder (Socket Mounting Type)

Just tighten one fixing screw! Outlet installation auxiliary bracket.

The "DH Holder (Socket Mounting Type)" is an auxiliary mounting bracket for sockets that is used with DIN rails manufactured by Shinohara Electric. 【Features】 1. It now supports the installation of Panasonic and Meiko Electric tumbler switches (only DH-5050TS). 2. It can be fixed at any position on the DIN rail by simply tightening one fixing screw. 3. It uses flat head screws for the mounting screws (with countersunk holes), making the mounting surface flat. 4. It is pre-processed to allow for easy installation of sockets. 5. In addition to socket installation, we can also provide additional processing to allow for the installation of noise filters, etc., upon request. *For more details, please refer to the PDF document or feel free to contact us.

  • Board materials
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Surface enclosure wall mount bracket - Space

Surface enclosure wall mount bracket - Space

Compatible with various Surface Pro and Surface Go models! Designed to allow full functionality even when locked.

The "Surface Enclosure Wall Mount Bracket - Space" is an enclosure compatible with Surface Pro 3, Pro 4, Pro 2017, Pro 6, Pro 7, Pro 8, Surface Go, Go 2, and Go 3. It can be used for various displays utilizing Surface in shops, POS, reception areas, education, healthcare, and more. To ensure ventilation, parts of the corners and back are left open. It allows for continuous charging by routing cables through the back, and even when locked with a key, all Surface functions can be utilized within the enclosure. 【Features】 ■ Aluminum alloy enclosure designed to prevent unauthorized removal ■ Storage for charging cables ■ Easy lock and release with a key ■ 100×100mm VESA standard ■ Compatible with our security wire *For more details, please refer to the PDF document or feel free to contact us.

  • Other security
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
The galvanized version of the pipe disconnection prevention fitting [Nukedome-kun] is now available!

The galvanized version of the pipe disconnection prevention fitting [Nukedome-kun] is now available!

Using couplings for the connection of pressure piping reduces the risk of disconnection due to insufficient bolt tightening.

Significantly reduce the risk of disconnection! We mitigate the risk of piping disconnecting from the Atom's coupling due to insufficient bolt tightening. *For those interested, we also provide access to "tensile test data," so please feel free to contact us. 【Features】 ■ Simple installation by just tightening the bolts. ■ Solid support with joint fittings and angle pieces that have a thickness of 6mm (Note 1). ■ High-strength bolts with a strength classification of 10.9 (Note 2) are used for the joint fitting bolts, allowing for tightening at high torque values. Note 1: For sizes 20A to 32A, the thickness is 4.5mm. Note 2: Galvanized products are equivalent to 8.8. *For more details, please refer to the PDF materials or feel free to contact us.

  • Pipe Fittings
  • Metal fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Metal fittings

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.