Last Updated： Aggregation Period:Dec 24, 2025～Jan 20, 2026
This ranking is based on the number of page views on our site.
16～30 item / All 82 items
Supports from 4mm to 16mm! Introduction of the Cobra hook eye type.
The "VIP Cobra Hook Eye Type VCOH" is a hook that accommodates sizes from 4mm to 16mm. Starting with the "VCOH-4," which weighs 0.14kg, we have a rich lineup including "VCOH-8" and "VCOH-16." 【Lineup】 ■VCOH-4 ■VCOH-6 ■VCOH-8 ■VCOH-10 ■VCOH-13 ■VCOH-16 *For more details, please refer to the PDF document or feel free to contact us.
【New】Easy to install without tools!
"CCS-FASTLOX Fastlox" is an end fitting for chain slings that can be easily installed by anyone. Traditionally, when connecting a load to a chain, shackles or hooks were used for installation and removal. However, with "CCS-FASTLOX Fastlox," safe attachment and detachment can be done with a single touch, significantly improving work efficiency, especially when lifting at multiple points or when there are many tasks to perform. You can see the actual installation method on the site in the video below. 【Features】 ● Installation completed with insert → click → lock ● Up to 80% more efficient installation and removal ● Easy installation without tools ● Safety: Automatic pin locking ● Prevents incorrect bolt installation ● Replacement for hooks and shackles *For more details, please download the PDF or feel free to contact us.
●Type with insertable intermediate material
It is a joint fitting that can be installed even after assembly. Since it can be added later, there's no need to reassemble!
Purely domestic safety design compatible with displays from various manufacturers.
Supports approximately 37-inch flat display.
Purely domestic safety design compatible with displays from various manufacturers.
Supports approximately 70-inch flat displays.
Improved corrosion resistance: New release of galvanized products! Detachment prevention fittings for Atoms coupling.
Significantly reduce the risk of disconnection! We mitigate the risk of piping disconnecting from the Atom's coupling due to insufficient bolt tightening. *For those interested, we also provide access to "tensile test data," so please feel free to contact us. 【Features】 ■ Simple installation by just tightening the bolts. ■ Solid support with a joint fitting that has a thickness of 6mm (Note 1) and an angle piece. ■ The joint fitting bolts use high-strength bolts with a strength classification of 10.9 (Note 2), allowing for tightening at high torque values. Note 1: For sizes 20A to 32A, the thickness is 4.5mm. Note 2: Galvanized products are equivalent to 8.8. *For more details, please refer to the PDF materials or feel free to contact us.
"Made of stainless steel," making it ideal for outdoor use and medical settings.
Made of stainless steel, it is ideal for outdoor use and medical settings. The simple design allows for easy installation and angle adjustment. This stainless steel wall-mounted bracket is excellent in corrosion resistance, heat resistance, and strength, and is also easy to maintain. It has a load capacity of 6 kg and can be installed either vertically or horizontally.
Purely domestic safety design compatible with displays from various manufacturers.
Supports ~24-inch flat display.
![All stainless steel tripod-compatible antenna mounting bracket [NB500]](https://image.mono.ipros.com/public/product/image/422478/IPROS18392370213430605221.jpg?w=280&h=280)
Universal antenna mounting bracket that can be attached to a camera tripod, compatible with 1/4-20UNC screws.
- 3mm thick all stainless steel This is a 3mm thick antenna mounting bracket made of durable, rust-resistant all stainless steel. - Compatible with 1/4-20UNC screws This is a universal antenna mounting bracket that can be attached to camera tripods. - Compatible with SMA, M, and N type connectors It has mounting holes for φ6.5 (SMA connector, M6 bolt) and φ16.2 (M and N connectors). - Compatible with U-bolts Our U-bolts (U35, U45) can be mounted.
![All stainless steel wide-angle antenna mounting bracket [NB600]](https://image.mono.ipros.com/public/product/image/422478/IPROS10544847881761225841.gif?w=280&h=280)
This is a fully stainless steel antenna mounting bracket that allows you to install the antenna vertically even on sloped surfaces.
- 3mm thick all stainless steel This is a 3mm thick antenna mounting bracket made of durable, rust-resistant all stainless steel. - Compatible with SMA, M, and N type connectors It has mounting holes for φ6.5 (SMA connector, M6 bolt) and φ16.2 (M and N connectors). - Adjustable angle over a wide range This antenna mounting bracket allows you to set the antenna vertically even on sloped surfaces.
The Insert Clip series was born from a thorough understanding of all on-site operations! It has innovatively evolved in reliability and work speed.
The "Insert Clip" can be easily installed by anyone with just one push. The pilot hole is standardized to 6mm for all products, which speeds up the working time compared to before. There is no need to change plugs depending on the counterpart materials, allowing compatibility with a wide range of materials. The Insert Clip was developed based on a thorough understanding of various on-site tasks. 【Features】 ■ The pilot hole is standardized to 6mm for all products, allowing for efficient work. ■ Just push it in and it's done—it's that easy! ■ It has elasticity, allowing for compatibility with 2-3 sizes, making it economical. ■ Only a drilling tool is needed, making work five times faster than usual. ■ With a pull-out load of over 20kg, it's reliable! ■ Can be removed and reused. 【Applications】 ■ Plumbing: Suitable for coated resin pipes, sheath pipes, resin pipes, etc. ■ SP Firefighting Equipment: Supports Helmex, E-Lock-SP, HTSP. ■ Gas Equipment: Targets gas flex pipes and sheath pipes, as well as cable management for gas water heaters. ■ Electrical Equipment: Supports CD and PF pipes for floor-mounted installations, as well as cables, CD, PF pipes, and cable supports in shaft rooms. *For more details, please refer to the PDF document or feel free to contact us.
Fixed hardware for equipment frame (Anchor bolt M8 type) / Part number M350L-608AC
Fixed brackets BCP countermeasure products that protect expensive machinery and equipment Passed earthquake test of seismic intensity 6 strong (conducted under the conditions below) Load limit for the object: 200kg Height limit for the object: Up to H1200mm
Using couplings for the connection of pressure piping reduces the risk of disconnection due to insufficient bolt tightening.
Significantly improved work efficiency! A clear comic explanation of 'Nakedome-kun', born from requests by general contractors. - How can we use coupling joints more safely and securely? - How is 'Nakedome-kun' installed? We solve your questions! Please download the materials and make use of them. Substantially reduce the risk of pipe disconnection! It mitigates the risk of pipes disconnecting from Atom's coupling due to insufficient bolt tightening. *For those interested, we also provide access to 'Tensile Test Data', so please feel free to contact us. 【Features】 ■ Simple installation by just tightening the bolts. ■ Firmly supported by joint fittings with a thickness of 6mm (*) and angle pieces. ■ High-strength bolts of strength class 10.9 are used for the joint fitting bolts, allowing for tightening at high torque values. (* For sizes 20A to 32A, the thickness is 4.5mm) *For more details, please refer to the PDF materials or feel free to contact us.
