Last Updated： Aggregation Period:Oct 08, 2025～Nov 04, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 08, 2025～Nov 04, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 08, 2025～Nov 04, 2025
This ranking is based on the number of page views on our site.
496～510 item / All 937 items
Outdoor single pipe steel material mounting bracket (parallel type)
◆ Due to prioritizing rust prevention, the surface finish of the actual product may be rougher than the product images. ◆ Please do not use it for scaffolding or similar structures that people will stand on. ◆ If the load is heavy, please increase the number of units installed to accommodate.
It is used when pulling out the driven steel pipe.
It is also effective when securely fastening various setup facilities with wires or ropes as a countermeasure against strong winds.
●Type with insertable intermediate material
It is a joint fitting that can be installed even after assembly. Since it can be added later, there's no need to reassemble!
Single pipe truss beam
Truss beams can be assembled with freely adjustable height, width, length, and pitch.
The connector will be attached to the panel. Panel mounting bracket.
The RSACL・SACL panel mounting brackets are designed to attach connectors to the panel. Available in OST and OGP types (for square hole mounting) and OST and OGP types (for round hole mounting). For more details, please contact us or refer to the catalog.
There are round type and square type available. Mounting brackets for small connectors.
The SRMACL and SMACL mounting brackets for small connectors are available for round and square types (for SMP type round hole mounting) (for SMP type square hole mounting). For more details, please contact us or refer to the catalog.
Can be constructed multiple times!
This oil droplet prevention agent is composed mainly of calcareous raw materials and can be used with Solari or boards made from Solari. The boards can be processed into a predetermined shape and used as ceiling or wall materials in environments where oil components may scatter. Additionally, the thriller is used at points where the boards are secured with screws or nails during use. Specifically, it is used by applying Solari through printing or other methods to the screws and their surrounding areas on the boards.
Eyelet type! Introducing the mounting hardware we handle.
At Ekoled Japan Co., Ltd., we handle "mounting brackets (eyelet type)." The materials are zinc-plated steel and Delrin 100 (AK), with options of stainless steel AISI 303 (V2) and AISI 316 (V4). Please feel free to contact us when you need assistance. 【Specifications】 ■Materials: Zinc-plated steel, Delrin 100 (AK) ■Options: Stainless steel AISI 303 (V2), AISI 316 (V4) *For more details, please refer to the PDF document or feel free to contact us.
The material used is zinc-coated steel and Delrin 100! Introducing our mounting hardware.
At Ecolde Japan Co., Ltd., we handle the mounting hardware (eyelet type) 'AK17'. The materials used are zinc-plated steel and Delrin 100, with options available in stainless steel AISI 303 (V2) and AISI 316 (V4). Additionally, we also offer other models such as 'AK21' and 'AU27'. Please feel free to contact us if you have any requests. 【Specifications】 ■Material: Zinc-plated steel, Delrin 100 ■Options: Stainless steel AISI 303 (V2), AISI 316 (V4) *For more details, please refer to the PDF document or feel free to contact us.
The option is stainless steel AISI 303 (V2)! Introducing products with hinge joint types.
At Ecolde Japan Co., Ltd., we handle mounting brackets (hinge joint type). The option is stainless steel AISI 303 (V2), and the material used is zinc-plated steel. We offer products such as "AG27," "AG36," and "AG43." Please feel free to contact us if you have any requests. 【Specifications】 ■Material: Zinc-plated steel ■Option: Stainless steel AISI 303 (V2) *For more details, please refer to the PDF document or feel free to contact us.
We offer options such as stainless steel AISI 303 (V2)! Let us introduce our mounting brackets.
At Ecolde Japan Co., Ltd., we handle the mounting bracket (fork type) 'GA16'. The material used is zinc-plated steel, and options include stainless steel AISI 303 (V2) and AISI 316 (V4). Additionally, we also have M5 models such as 'GA20' and 'GG20'. Please feel free to contact us if you have any requests. 【Specifications】 ■ Material: Zinc-plated steel ■ Options: Stainless steel AISI 303 (V2), AISI 316 (V4) *For more details, please refer to the PDF document or feel free to contact us.
Mounting brackets that can be easily fixed for the installation of wiring ducts, terminal blocks, and lug boards!
The "DH Holder (DIN Rail Mounting Bracket)" is a product used for mounting wiring ducts, terminal blocks, and terminal plates on DIN rails manufactured by Shinohara Electric. It can be securely fixed at any position on the DIN rail simply by tightening two fixing screws. Mounting equipment can be easily done with screws (4 locations, M4 threaded). It can also be used as a fastening bracket for terminal blocks, relays, etc. 【Features】 ■ Single-side mounting type: S type ■ Double-side mounting type: RL type ■ Equipment can be easily mounted with screws ■ Can also be used as a fastening bracket for terminal blocks, relays, etc. *For more details, please refer to the PDF document or feel free to contact us.
Just tighten one fixing screw! Outlet installation auxiliary bracket.
The "DH Holder (Socket Mounting Type)" is an auxiliary mounting bracket for sockets that is used with DIN rails manufactured by Shinohara Electric. 【Features】 1. It now supports the installation of Panasonic and Meiko Electric tumbler switches (only DH-5050TS). 2. It can be fixed at any position on the DIN rail by simply tightening one fixing screw. 3. It uses flat head screws for the mounting screws (with countersunk holes), making the mounting surface flat. 4. It is pre-processed to allow for easy installation of sockets. 5. In addition to socket installation, we can also provide additional processing to allow for the installation of noise filters, etc., upon request. *For more details, please refer to the PDF document or feel free to contact us.
A new size that can accommodate noise filters with widths of 52 to 53 mm has arrived!
The "DH Holder (Blank Type)" is an auxiliary bracket that can be mounted on a DIN rail made by Shinohara Electric and allows customers to perform custom tap hole processing to attach various devices. It can be processed for tap holes and round holes according to the breakers, devices, and brackets used, and is manufactured with a thickness of 2.3mm to ensure the thread can be secured without the need for barrelling. It can be fixed at any position on the DIN rail by simply tightening one fixing screw, so there is no need to attach it directly to the middle plate. Countersunk screws are used for the mounting screws (with countersunk holes), making the mounting surface flat. 【Features】 ■ Custom hole processing can be done according to the breakers, devices, and brackets used ■ Manufactured with a thickness of 2.3mm to ensure thread security ■ No need for direct attachment to the middle plate ■ Countersunk screws are used for the mounting screws *For more details, please refer to the PDF document or feel free to contact us.
Just tighten one fixing screw! Switch mounting type DH holder.
The "DH Holder (Switch Mount Type)" is a product used to mount toggle switches and volume controls onto DIN rails made by Shinohara Electric, in combination with the switch mounting brackets "TK-30," "TK-30-6.5," and "TK-30-16.5." It can be fixed at any position on the DIN rail by simply tightening one fixing screw. Additionally, it uses flat head screws for the mounting screws (with countersunk screw holes) to ensure a flat mounting surface. Furthermore, the switch mounting brackets are pre-tapped for easy installation. 【Features】 ■ Applicable brackets: Shinohara Electric switch mounting brackets TK-30, TK-30-6.5, and TK-30-16.5 ■ Can be fixed at any position on the DIN rail ■ Pre-tapped for easy installation ■ Uses flat head screws for mounting *For more details, please refer to the PDF document or feel free to contact us.
