Last Updated： Aggregation Period:Oct 01, 2025～Oct 28, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 01, 2025～Oct 28, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 01, 2025～Oct 28, 2025
This ranking is based on the number of page views on our site.
631～645 item / All 940 items
VT-7560 Floor Fitting for Badminton Posts <For Flooring Installation, Locking Type>
Floor fittings for badminton posts <for flooring, lock type> VT-7560 (set) - For board flooring - Detachable - Socket made of special steel pipe - The removal of the cap is done with a special tool.
GF-1009 Low Iron Bar Floor Fitting
GF-1009 (set) Floor fittings for low iron bars - For board covering - Upturn type - Made of zinc alloy - Socket made of special steel pipe
GF-2098 Jump Box Anti-Slip Fitting
GF-2098 (set) vaulting box anti-slip fittings - 2 pieces per set - The anti-slip fittings are screwed into the floor for use.
Floor hardware for fixing judo mat frames JD-9020 floor hardware
Floor hardware for fixing the judo mat frame. JD-9020 (each) floor hardware. - When removing the judo mat frame, cover it with the included flat screws.
Swing seat hardware
SW-110 Swing Seat Metal Fittings - 2 sets per set - Includes mounting bolts - Includes shackle for chain connection SW-111 Swing Seat Metal Fittings - 2 sets per set <Stainless Steel> - Includes mounting bolts - Includes shackle for chain connection
VT-6658 Volleyball Post / Indoor Tennis Post Floor Fittings <With Elastic Sheet>
Floor fittings for volleyball posts and indoor tennis posts VT-6658 (set) floor fittings for volleyball and tennis posts <with elastic sheet> - Upturn type - Socket made of special steel pipe - The lid opens and closes with a ball lock pin.
AH-4534 Floor Mounting Bracket for Handball Goal
AH-4534 (set) Floor mounting hardware for handball goals - 8 pieces per set
Can be installed even in narrow areas like densely populated urban residential areas! Seismic reinforcement brackets that can achieve seismic retrofitting in a short period with minimal construction.
"FIT Power" is a seismic reinforcement fixture such as a concrete block wall that replaces retaining walls. It limits the maximum protrusion of the site-side angle post to approximately 65mm, allowing for passage even after installation, making it a convenient design for narrow lots and densely populated residential areas. Additionally, it can be tightened by a single worker from the site side, enabling a reduction in construction time. It is also compatible with perennial walls. *Please inquire about delivery times as this is a made-to-order product. 【Features of FIT Power】 ■ Lock bolt pile foundation method - Ground friction force is seven times the weight - Shortened construction period and cost reduction ■ Round head bolts prevent free spinning ■ Design that maintains convenience even in narrow lots - Residents can pass through even after installation - Component weight manageable by one person ■ Demonstration experiments conducted under the guidance of the Faculty of Engineering, Gifu University ■ Patent obtained for "reinforcement structure and reinforcement materials for walls" ■ Certified as a recommended disaster prevention product by the Japan Disaster Prevention Safety Association *For more details, please refer to the PDF document or feel free to contact us.
Can be installed even in narrow areas like densely populated urban residential areas! Earthquake-resistant reinforcement brackets that can be constructed quickly and with minimal work for seismic retrofitting.
"FIT Power" is a seismic reinforcement fixture such as a concrete block wall that serves as an alternative to retaining walls. It limits the maximum protrusion of the angle support on the site side to about 65mm, allowing for passage even after installation, making it a convenient design for narrow lots and densely populated residential areas. Additionally, it can be tightened by a single worker from the site side, enabling a reduction in construction time. The FIT Power Type 14 is compatible with block walls of H1, 400mm from the road surface. *We also have models available for block walls ranging from H1,200 to 1,800mm. 【Features of FIT Power】 ■ Lock bolt pile foundation method - Ground friction force is seven times the weight - Shortened construction period and cost reduction ■ Round-headed bolts prevent free spinning ■ Design that maintains convenience even in narrow spaces - Residents can pass through even after installation - Component weight manageable by one person ■ Demonstration experiments conducted under the guidance of the Faculty of Engineering, Gifu University ■ Patented as a "reinforcement structure and reinforcement member for walls" ■ Certified as a recommended product for disaster prevention by the Japan Disaster Prevention Safety Association *For more details, please refer to the PDF materials or feel free to contact us.
Can be installed even in narrow areas like densely populated urban residential areas! Seismic reinforcement brackets that enable earthquake resistance construction in a short period with minimal work.
"FIT Power" is a seismic reinforcement fixture such as a concrete block wall that serves as a substitute for retaining walls. It limits the maximum protrusion of the angle support on the site side to approximately 65mm, allowing for passage even after installation, thus maintaining convenience in narrow lots and densely populated residential areas. Additionally, it enables a single worker to perform tightening operations from the site side, which can shorten construction time. *The model compatible with the perennial wall is made to order. Please allow about one month for manufacturing and delivery. 【Features of FIT Power】 ■ Lock bolt pile foundation method - Ground friction force is seven times the weight - Shortened construction time and cost reduction ■ Round head bolts prevent free rotation ■ Design that maintains convenience even in narrow lots - Residents can pass through even after installation - Component weight manageable by one person ■ Demonstration experiments conducted under the guidance of the Faculty of Engineering, Gifu University ■ Patent obtained as "Reinforcement structure and reinforcement members for walls" ■ Certified as a recommended disaster prevention product by the Japan Disaster Prevention Safety Association *For more details, please refer to the PDF document or feel free to contact us.
Construction example of an original gate combining "FIT GATE" and "FIT HIGH-WALL"!
We would like to introduce a case where we delivered the "FIT GATE + HIGHWALL." The "FIT HIGH-WALL," which is the same height as the "FIT GATE," does not require a retaining wall due to its seismic design, allowing for secure pathways even in locations adjacent to roads, while also functioning as a privacy screen. Since the embedded post and intercom piping are installed and shipped from the factory, there is no need for detailed work on-site, reducing the burden of on-site labor. 【Case Overview】 ■ Product: FIT GATE, FIT HIGH-WALL ■ Size: Approximately W10,550 × H2,925 mm ■ Installation Time: Approximately 5 hours *For more details, please refer to the related links or feel free to contact us.
The finishing work was done by the contractor! They completed it with a gentle impression for the gate.
We would like to introduce a case where a gate that integrates a shutter gate and an arch gate was manufactured with a split structure, and connection work was carried out on-site. The wall, which is the same height as the shutter gate that divides the garage space, was manufactured with FIT HIGH-WALL. The dimensions from the shutter gate to the wall are approximately W12,000 × H2,925 × D5,920 mm. [Case Overview] - The wall, which is the same height as the shutter gate that divides the garage space, was manufactured with FIT HIGH-WALL. - Installation time was approximately 6 hours. - The gate was finished with a gentle impression. *For more details, please refer to the related links or feel free to contact us.
Introduction of a case where columns and beams were manufactured separately for a large gate and connected on-site.
We would like to introduce a case where a shutter gate for two units was manufactured and delivered by FIT GATE. Due to the large size of the gate, the columns and beams were manufactured in separate parts, and connection work was carried out on-site. After the installation of the framework, the contractor applied wall finishes and the gate was completed. Since privacy screens will be installed on both sides of the gate, we adjusted the design to accommodate the overhang of the steel frame base. 【Case Overview】 ■ Dimensions: Approximately W7,050 × H2,925 × D1,230 mm ■ Installation Time: Approximately 3.5 hours *For more details, please refer to the related links or feel free to contact us.
A large structure measuring approximately W10,000 × H3,125 × D1,130 mm! Installation work will be completed in about 5 to 6 hours.
We would like to introduce a case where we manufactured and delivered the FIT GATE as a general-purpose door and shutter gate. The large structure measures approximately W10,000×H3,125×D1,130mm, and it was produced in several sections, which were then connected on-site. The installation work was completed in about 5 to 6 hours. 【Case Overview】 ■ Dimensions: Approximately W10,000×H3,125×D1,130mm ■ Installation Time: Approximately 5 to 6 hours *For more details, please refer to the related links or feel free to contact us.
The roof is designed with a portion cut out to allow the growing plants to emerge!
We would like to introduce a case where a gate finished in a tropical style was manufactured and delivered. The finishing paint and tile work were carried out by a contractor. The roof has been partially cut out to allow the growing plants to emerge. Please feel free to contact us when you need our services. 【Case Overview】 - The finishing paint and tile work were carried out by a contractor. - The roof has been partially cut out to allow the growing plants to emerge. *For more details, please refer to the related links or feel free to contact us.
