Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.
76～90 item / All 331 items
Non-destructive testing device that only strikes a concrete surface with a hammer for a measurement time of 2 seconds.
This is a concrete moisture meter using the capacitance measurement method. It comes with an automatic sieve wet screener, a weighing scale, and a printer, providing everything needed for measurement. It can also measure the moisture content of fine aggregates (sand).
All necessary items for measurement, including an automatic sieve wet screener, weighing scale, printer, etc., are included.
This is a concrete moisture meter using capacitance measurement method.
It is possible to select a measurement mode that can accommodate any type of sample or condition.
This is a moisture meter that can switch between high precision of 0.01% and standard 0.1%, capable of displaying moisture content through infrared heating and drying.
This is a moisture meter using infrared heating and drying.
The FD-720 can switch between high precision of 0.01% and the standard 0.1% to display moisture content. To achieve high-precision measurements, this device employs a balance unit with a resolution of 1mg called "Uniblock," and it is equipped with a newly developed medium-wave infrared quartz heater with a large heat capacity of 625W in the drying section. Additionally, it features a "Rapid Drying Mode" enabled by drying control software, allowing moisture values to be obtained in a short measurement time, significantly reducing measurement time for certain samples. It can store up to 10 types of measurement conditions in the memory area, eliminating the need for manual setting of conditions each time, even for samples with different measurement conditions. This device is positioned as a moisture meter for quality control departments and inspection departments that require advanced moisture management, and it can be used for high-precision moisture control.
By drilling two holes at the desired measurement location and simply inserting the sensor, moisture measurement is possible.
The HI-800 is a compact and lightweight concrete mortar moisture meter. For the repair of exterior walls, epoxy resin is injected into damaged concrete (mortar), and measuring the moisture content with this device at that time will help determine the optimal injection timing. By drilling two holes at the desired measurement locations and simply inserting the sensors, moisture measurement is possible. This device is a moisture meter developed based on the "Public-Private Joint Research on Repair and Renovation Techniques for Exterior Materials" by the Ministry of Construction's Building Research Institute. For more details, please contact us.
Simply insert the sensor into the soil to easily measure the volumetric water content of the soil in just a few seconds!
The DIK-311E is a soil moisture meter that allows for easy measurement of soil volumetric water content in just a few seconds by simply inserting the theta probe (sensor) into the soil. The sensor measures by detecting changes in dielectric constant and is waterproof, allowing it to be directly buried in the ground. It can measure volumetric water content from 0 to 100% with an accuracy of 5%, and with calibration, it can achieve an accuracy of 2%. For more details, please contact us.
The oil moisture meter enables highly reliable measurement of moisture in oil.
The MM70 is suitable for preventive maintenance of systems that use oil. By measuring the moisture activity value, it quantifies the risk of free water occurrence and prevents lubrication system troubles in advance. The probe can be directly inserted into the process pipe via a ball valve, eliminating the need to drain oil from the operating system. For more details, please contact us.
Essential for the installation of the waterproofing layer. Measurement of moisture on the surface of the concrete slab.
In the construction of waterproof layers for concrete deck slabs of road bridges, if the surface moisture content after concrete surface treatment is not appropriate, it can lead to blisters and peeling in the waterproof layer, resulting in the expected performance not being achieved. The HI-100 adopts an electrical resistance method that minimizes the influence of surface irregularities, and it is equipped with a conductive rubber sensor, allowing the sensor to closely adhere to uneven surfaces and significantly improve accuracy. 【Features】 - Accurate measurements can be taken regardless of the finishing condition of the concrete deck surface. - Ideal for sites such as new construction projects and asphalt replacement work. For more details, please contact us.
Rapid confirmation of moisture content on-site! A compact and lightweight rock and soil investigation testing device.
"WARP" is a surface-type RI moisture meter designed for the information-based construction of embankments, specifically to easily, quickly, and accurately measure the task of "confirming that the moisture content of the embankment material is within the range that achieves the specified compaction degree." Compared to conventional RI density moisture meters, it is compact, lightweight, and easy to handle. It allows for rapid verification of moisture content on-site, and repeated measurements can be performed with ease. Additionally, measurement data is stored in the internal memory of the device and can be viewed through key operations on the device. The data in the internal memory can be transferred to a USB memory stick via the USB port on the side of the device. 【Features】 ■ Compact and lightweight for easy handling ■ Rapid verification of moisture content on-site ■ Compatible with soil materials with moisture content up to approximately 40% ■ Significantly simplifies the measurement process ■ Reduces the effort required for drilling operations by setting the source depth to 6 cm *For more details, please feel free to contact us.
The MX8000 has 10 representative calibration curves registered in advance for quick measurements.
High reproducibility. It dislikes being affected by the temperature of the measured object and detects the temperature to self-correct. It is not influenced by the material, color, or printing of the paper. Since it is not affected by the surface finish or materials like polyethylene, there is no need to remove the film for measurement.
A high-performance KF moisture meter that can perform both the volumetric method and the coulometric method in one device!
- A high-performance Karl Fischer moisture meter that can perform both volumetric and coulometric moisture measurements with a single unit. - The incorporation of Metrom's original electric burette, Dozino, allows for even more space-saving installation compared to conventional moisture meters. - Achieves stable moisture measurement by blocking external humidity without the use of troublesome grease. - Peace of mind with the same IQ/OQ, validation, and after-support available worldwide. - Data integrity measures are also assured with Metrom.
