Last Updated： Aggregation Period:Nov 19, 2025～Dec 16, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Nov 19, 2025～Dec 16, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Nov 19, 2025～Dec 16, 2025
This ranking is based on the number of page views on our site.
31～45 item / All 164 items
Colorful laser mounts (compatible with various shapes) allow you to choose a mount that meets your requirements.
At Aroyo Instruments, we offer a variety of high-precision laser diode drivers, temperature controllers, and mounts for laser diodes and LEDs at reasonable prices.
High-power multimode semiconductor laser bar
■1cm bar with a 500μm pitch emitter ■Supply of bare bars and CS mounts is available
◆ Ultra-high stability optical mount ◆ AOM mount ◆ Fiber aligner ◆ Motor-driven mirror mount
At First Mechanical Design (commonly known as FMD), we manufacture optical mounts that achieve unparalleled ultra-high stability and ultra-high reproducibility by adopting uniquely developed mechanisms such as the M-RING (patented) and soft lock mechanism (patented). The MM1000S has demonstrated unmatched operability and astonishing stability even in evaluation tests conducted with an interferometer composed of 32 units at the University of Tokyo's Furusawa Laboratory.
◆ Supports up to 5A drive current ◆ Return bias prevention function (to prevent damage to the laser diode) ◆ Interlock function
◆Mount for 14-Pin Butterfly Laser Diode Designed as a heat sink integrated mount for 14-pin butterfly semiconductor lasers, it allows for easy connection between the driver and the semiconductor laser via two 9-pin D-sub connectors.
Used for adjusting and holding the monitor angle! A diverse lineup of products.
This catalog introduces the "monitor arms and monitor mounts" that we handle. We offer a lineup of highly convenient products, including types that allow angle adjustments with a free-stop mechanism and do not require screw adjustments, as well as those that enable diverse designs and installations through combinations of arms. Detailed information on each product's features, specifications, and applications is provided, so please take a moment to read through it. [Featured Products] ■ High-performance, high-durability type ■ High-load type ■ Monitor mount hinge ■ Monitor arm ■ Mounting system *For more details, please download the PDF or feel free to contact us.
High-quality mirror mount made in Europe, excellent in precision and stability.
Our standard stock items. Available for immediate delivery.
Rust-resistant, sturdy all-stainless steel cross mount.
[Model Name] X-35/35 φ10～35/φ10～35 X-35/45 φ10～35/φ16～45 X-45/45 φ16～45/φ16～45 X-35/65 φ10～35/φ27～65 X-45/65 φ16～45/φ27～65 X-65/65 φ27～65/φ27～65 All Stainless Steel Cross Mount This is a cross mount for antenna installation made of all stainless steel, which is resistant to rust and sturdy. Various Size Options Available We offer a range of cross mounts in various sizes (φ10 to φ65). Please choose a size that fits your usage environment (antenna, pole, etc.).
We will introduce a case where thin-film submounts were delivered to a telecommunications company with limited experience and knowledge regarding submounts!
Customers in the telecommunications industry have limited experience and knowledge regarding sub-mounts, which has led to an inability to engage in equal discussions. As a result, most specifications were determined based on proposals from manufacturers, leading to issues such as defects arising later. Our company provides detailed technical explanations and considerations for each of the customer's concerns and requests, allowing us to make proposals on the spot. As a result, we created a specification document and held follow-up meetings to ensure the customer fully understood it before finalizing and delivering the document, which led to very appreciative feedback from them. [Case Summary (Excerpt)] ■ Concerns about sub-mounts - Limited experience and knowledge regarding sub-mounts - Inability to engage in equal discussions with the sub-mount manufacturer found - Most specifications were determined based on proposals from the manufacturer, resulting in defects later on *For more details, please refer to the related links or feel free to contact us.
Effective in vibration isolation of all types of machinery.
It is effective for vibration isolation of all types of machinery. We offer an ESL model that adapts to the intermediate frequency range of 4.5 to 11 Hz and a V model that adapts to relatively high frequency ranges. Both models can be installed in any direction and can accommodate loads from above, below, left, right, and front to back. 【Features】 ○ Effective absorption of mechanical vibrations ○ Excellent performance in blocking vibrations For more details, please contact us or download the catalog.
There are various rubber hardness options that correspond to vertical thrust loads ranging from 35kg to 2100kg! Recommended for pleasure boats, patrol boats, and sightseeing boats.
The "Cushion Float" is a versatile unit designed to effectively block vibrations and noise generated from both static and mobile equipment. This product was originally designed for vibration isolation for small boat engines and features an easy-to-install, compact, thin vibration mount. It has the capability to control relatively large static deflection directions loaded in shear and compression, as well as three directions of suspended equipment. 【Features】 - Designed for vibration isolation for small boat engines - Easy to install and compact thin vibration mount - Capable of a low natural frequency of 8Hz - The metal cover adhered to the top protects the rubber from oil contamination and is resistant to corrosion - Suitable for marine applications, responding to the thrust of (small boat) propellers *For more details, please refer to the PDF materials or feel free to contact us.
"Optimal for a wide range of applications" - Vibration isolation support mount "Evolo Mount" developed in the Netherlands and produced at the Trelleborg AVS factory in the Netherlands.
-Made in the Netherlands- Trelleborg AVS has acquired the Dutch company LOGGER (LOHAS). It is a well-established brand that has been manufacturing and providing marine and defense-related vibration mounts and vibration materials for many years. Among the many vibration mounts, there is the Evolo (Evolo) 600 series mount, which is offered for civilian use. It is designed for vibration support for generator sets, pump units, large diesel engines, cooling units, compressors, gearboxes (ASSY), wind turbines, deckhouse pillars, and more. This product has received type certification from international certification bodies such as Lloyds Register and DNV. These mounts are manufactured in the Netherlands and are directly imported by our company. We have the 631 series, 633 series, 611 series, and 622 series available. Transportation costs related to imports will be charged separately from the product price. This product is currently under negotiation with major domestic manufacturers for medium-sized ship engines and compressors.
Available for selection: pole mounts with diameters of 3.81cm, 4.45cm, and 5.08cm, for commercial use laptop arms.
This is a monitor arm with a laptop tray for pole mounting made by ICWUSA in the United States. 【Features (ASLUS-P2-A2)】 ■ Monitor arm for pole mounting with a diameter of 2 inches (5.08 cm) ■ Easy-to-manage double arm type (length 26.7 cm x 2) ■ Comes with a laptop tray (angle adjustable) ■ Includes a left-right sliding mouse tray *For more details, please refer to the external link page or feel free to contact us.
Height-adjustable commercial tablet mount
ICWUSA is a U.S. manufacturer that produces and sells commercial monitor arms for various fields such as healthcare, industry, and logistics. The commercial monitor arm manufacturer has developed a tablet mount. 【Features】 - It can rotate 360 degrees, allowing the tablet to be used in both portrait and landscape orientations. - Height adjustable (42cm) - Available in two types: a grommet type with a security lock (TABSDM) and a clamp type that can be installed without drilling holes in the counter (TABCC), as well as a plate compatible with 100mm VESA that can be attached to the monitor arm. - Comes with an easy-to-adjust angle handle. - Compatible tablet sizes: Standard type (TABV): Width 24 to 29cm, Height 16.5 to 20.3cm Large size (TABV12): Width 29.2 to 34.3cm, Height 19.1 to 22.9cm *For more details, please refer to the external link page or feel free to contact us.
Folding long display arm "ASELQ5280-WT" made by ICWUSA in the USA.
Wall-mounted adjustable long arm that combines "safety," "durability," and "functionality." Model number: ASELQ5280-WT * This is a wall mount (fixed to the wall) type monitor arm. * Smooth positioning is possible with the built-in high-quality gas spring. * Equipped with a range of motion limit (ROM limit). * The display can swivel up to 360 degrees. * Load capacity: 12.7 kg. * For more details, please refer to the external link page or feel free to contact us.
