Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.
1～30 item / All 49 items
X-ray food test specimen SUS ball test specimen 5-piece set φ0.3 φ0.4 φ0.5 φ0.6 φ0.7 / Item number M36792SB5-01N
Test specimen for foreign object inspection using X-rays. 99.99% pure quartz can be continuously supplied as a stable material over a long period. This is the master standard specimen.
We will conduct a risk analysis of on-site electronic equipment through environmental testing in accordance with ISA71.04-1985, and visualize the corrosion risk on-site.
By conducting an environmental analysis, we will quantitatively assess the risk to equipment from corrosive gases. We will install copper and silver test specimens on-site and conduct a one-month exposure test, analyzing the thickness of the corrosion rust layer to evaluate the risk at the site. We will submit a report in accordance with ISA standards. We always have test specimens in stock, so we can start the environmental survey immediately.
Environmental measurement methods compliant with ISA S71.04-2013, as required by IBM and AWS.
Floating microscopic particles (including metal flakes and metal particles) and reactive gases can adversely affect servers, either alone or in combination with environmental factors such as humidity and temperature. The risks posed by excessively small particles or high concentrations of harmful gases may lead to server malfunctions or, in the worst case, complete system failures. IBM and AWS may have specified design environment specifications to manage data centers at level G1 of ASI/ISA71.04-1985. By measuring with corrosion gas test specimens, which are an environmental analysis method compliant with ISA S71.04-2013, it is possible to visualize the environment of the data center.
![Results of pore voltage measurement [Silicon Alloy Technology Handbook]](https://image.mono.ipros.com/public/product/image/518/2000741827/IPROS53595641356963376131.png?w=280&h=280)
Introducing the test results of pitting potential measurements in graphs, including "SUS316L" and "Silicoroy A2"!
This document includes a comparison of various stainless steels in pitting potential measurement tests, focusing on precipitation-hardened stainless steels. We present test results for "SUS304," "SUS440C," "SilicoLOY A2," "SilicoLOY XVI," and others in graphical form. We invite you to read it. 【Contents】 ■Test specimens ■Natural potential ■Pitting potential (10μA) ■Pitting potential (100μA) ■Test results (graphs) *For more details, please refer to the PDF document or feel free to contact us.
I tested the performance of a carbon 3D printed model with a tensile test!
"Mitarepo" is a series based on the concept of "I tried doing this!" where we introduce what can be done using various products. From the wide range of product categories handled by System Create, we deliver useful information each time. The theme of Vol. 28 is "We tried tensile testing with carbon 3D printed models!" This time, we conducted tensile tests using models created with the carbon 3D printer "Anisoprint Composer" to investigate the actual strength of models containing carbon material. We created two types of test specimens: 1) Carbon fibers arranged perpendicular to the tensile direction 2) Carbon fibers arranged parallel to the tensile direction We are examining how much strength these two models possess and the difference that fiber orientation makes. "Are carbon printed models really strong?" "What should I be careful about when using carbon fiber?" We will explain the actual strength and important points of interest, along with verification photos and comments from our technical staff. *You can download the materials from the button below.
I tested the performance of carbon fiber's "anisotropy" with a 3D printed model!
"Mitarepo" is a series that introduces what can be done using various products with the concept of "I tried doing this!" From the wide range of product genres handled by System Create, we deliver useful information each time. The theme of Vol.30 is "We tried tensile testing with a carbon fiber 3D printed model! Part 2." In the tensile test introduced in Vol.28, we evaluated a solid model with 100% infill, but this time we examined how it performs with a lattice infill structure, which is one of the advantages of 3D printing. One of the features of the carbon 3D printer "Composer" is that carbon fibers can be applied to lattice infill. This time, we compiled the results of tensile tests using test specimens printed with that lattice infill. "How strong can a lattice arrangement be?" "Are there any characteristics to the shape of the infill?" We will explain the actual strength and important points of interest, along with verification photos and comments from our technical staff. *You can download the materials from the button below.
We will conduct evaluation tests of the pallets in accordance with the pallet testing methods specified in JIS Z 0602.
The following pallet evaluation tests specified in JIS Z 0602 can be conducted. The amount of strain, deflection rate, and residual deflection rate can be measured according to the set load. ▼ For more details, please download the PDF document. (Recommended) ▼ Customers in a hurry, please contact us using the 'Contact Us' section below.
We can produce test specimens for physical property measurements and prototype test specimens of various thermoplastic resins. We also conduct evaluations of moldability.
We produce test specimens for various thermoplastic resins, ranging from general-purpose polymers to high-performance engineering plastics, for various physical property measurements (witness testing available). We have the latest hybrid molding machines (140t, 60t).
Measuring for peace of mind! High-precision standard test pieces compliant with ISO and JIS for indirect verification of hardness testers.
The high-precision "hardness reference specimen" has been nurtured in Japan and is recognized worldwide for its hardness uniformity and standard values based on international standards. It is a standard test piece compliant with ISO and JIS for indirect verification of hardness testers, widely used around the globe. Various certifications, such as the ISO 9000 series, require management of testing machines in accordance with ISO and JIS standards. We encourage daily management to confirm the accuracy, stability, and reproducibility of testing machines, and we are currently actively developing reference specimens for nanoindentation under guidance from various sectors. 【Features】 ○ Excellent hardness uniformity ○ No time-dependent changes in hardness ○ Compliant with Japanese Industrial Standards → Registration Certificate Number JQA-2078 ISO 9001-2000 / JIS Q 9001:2000 For more details, please contact us or download the catalog.
![[Data] Microscope Tissue Standard Slide](https://image.mono.ipros.com/public/product/image/f3b/2000617036/IPROS37102551472404272652.png?w=280&h=280)
We provide standard specimens of the microscopic structure of steel materials, along with detailed explanations through photographs.
This document introduces the "Microscopic Structure Standard Samples" handled by Yamamoto Scientific Tool Research Co., Ltd. Representative materials have been selected from the steel materials listed in JIS. These have been classified into categories from 1 to 7, and strict heat treatment has been applied to them, resulting in representative microscopic structures being produced at the Materials Technology Education Research Association. Additionally, the material properties, heat treatment conditions, and structures are thoroughly explained through actual standard samples, their photographs, and detailed descriptions to ensure a comprehensive understanding. [Contents (partial)] ■ Greetings ■ Microscopic Structure Standard Samples Category 1: Carbon Steel and Cast Iron Edition - 25 types ■ Microscopic Structure Standard Samples Category 2: Alloy Tool Steel and High-Speed Tool Steel Edition - 25 types ■ Microscopic Structure Standard Samples Category 3: Structural Alloy Steel and Special Purpose Steel Edition - 25 types ■ Microscopic Structure Standard Samples Category 4: Non-Ferrous Alloys Edition <Fully Revised Version> - 25 types, etc. *For more details, please refer to the PDF document or feel free to contact us.
A list of test specimen shapes for injection molding tests in photos! We will introduce the shapes, mold photos, standard numbers, and more!
This document includes the shapes of test specimens for injection molding tests, as well as photos of the molds and standard numbers. We provide clear introductions for various shapes, including dumbbell shapes, strip shapes, flat plates, discs, and bar flows. Additionally, the latter part of the document summarizes the specifications of molding machines, temperature control devices, and dryers in a list format. Please make use of it. [Contents] - Shapes: Dumbbell shape / Strip shape / Flat plate / Disc shape / Bar flow - Mold photos - Standard numbers - Management numbers - Corresponding molding machines *For more details, please refer to the PDF document or feel free to contact us.
We can handle extremely short delivery times! Leave the processing of metal material test pieces for forged and special steels to us.
At Yamato Steel Co., Ltd., we carry out the "manufacturing and processing of test specimens." We adjust the processing conditions, such as cutting speed, according to the properties of the materials (hardness, viscosity) and various situations, ensuring that the test results remain consistent not only with a precision of 0.01 mm but also with surface roughness, utilizing our accumulated know-how. 【Service Details】 ■ Manufacturing and processing of tensile test specimens ■ Manufacturing and processing of impact test specimens (Charpy test specimens) *Please contact us for more details.
We conduct measurements of dimensions, surface roughness, and film thickness for inspection and quality control.
At Standard Test Piece Co., Ltd., we offer "specimen measurement." We provide stable and reliable inspections, including "two-dimensional non-contact image dimension measurement," as well as "coating measurements such as anodizing, plating, and coating" and "contact surface roughness measurements." For more details, please contact us. 【Services Offered】 ■ Dimension Measurement: Two-dimensional non-contact image dimension measurement ■ Surface Roughness Measurement: Contact surface roughness measurement ■ Film Thickness Measurement: Coating measurements such as anodizing, plating, and coating *For more details, please refer to the PDF document or feel free to contact us.
![[Data] KIc test of resin according to ASTM D5045](https://image.mono.ipros.com/public/product/image/c2a/2001014287/IPROS20437408384306632350.png?w=280&h=280)
Activities to establish new testing menus for metal materials, resin materials testing, and chemical analysis!
This document introduces a comparison between the KIc tests for resins according to ASTM D5045 and the KIc tests for metallic materials according to ASTM E399. It provides an overview of the testing method of ASTM D5045 in contrast to ASTM E399, including a "preface" that explains the use of standard test specimens such as Compact Tension (CT) specimens and three-point bending (SENB) specimens, which are permitted in both ASTM D5045 and ASTM E399. This book is designed to be a useful reference during the consideration of implementation, so please take a moment to read it. 【Contents】 ■ Preface ■ Fracture Toughness Test Specimens ■ Testing ■ Conclusion ■ References *For more details, please refer to the PDF document or feel free to contact us.
Boasting 70 years of experience in test piece processing! We aim for the future of standard strength specimens.
The "Standard Strength Specimen" aims to manufacture and sell standard and reference specimens for calibrating hardness testing machines and Charpy impact testing machines. The hardness standard specimens are assigned standard values with high precision for all products by JBI (Japan Bearing Inspection Association), and the Charpy impact reference specimens are certified for standard values through tests by NK (Nippon Kaiji Kyokai) before shipment. Additionally, we strive to provide cost-effective products through consistent production that leverages our in-house developed heat treatment technology and the expertise of test piece processing manufacturers. 【Features】 ■ Traceable standard specimens to national standard values ■ Provision of standard notches ■ Technology development and quality assurance through quality engineering ■ Winner of the Taguchi Method Symposium Grand Prize ■ High cost performance *For more details, please refer to the PDF document or feel free to contact us.
Pseudo-defects with specified hole diameter and hole length (reference test piece). Please use for leakage testing or evaluation.
This is a pseudo-defect (reference test piece) that specifies hole diameter and hole length. It can be used in pressure change leakage testing methods and liquid immersion testing methods. It can be utilized for standard setting and validity evaluation using positive controls (defective product samples). - Evaluation of packaging integrity in accordance with JP18 - Setting of "maximum allowable leakage limit" - Testing for the intrusion of water vapor, oxygen, and microorganisms - Quantification from qualitative testing methods (converting current leakage standards to hole diameter)
Compliant with new ASTM and ISO standards! Wilson hardness reference blocks and indenters with A2LA and NVLAP calibration certificates.
Wilson hardness reference blocks are made from the highest quality materials to set industry standards and ensure that uniform and reusable test blocks are available. We offer a variety of scales and blocks to accommodate a wide range of hardness scales related to Rockwell, Brinell, Knoop, and Vickers tests. All Wilson test blocks are calibrated at the Wilson Hardness Calibration Laboratory in Binghamton, New York. Wilson Laboratories is A2LA ISO-IEC 17025 certified, and the testers used in the calibration process utilize NIST traceable equipment for strict monitoring. 【Hardness Reference Block Lineup】 ■ Wilson Rockwell hardness reference block ■ Wilson Brinell hardness reference block ■ Wilson Vickers hardness reference block, micro Vickers hardness reference block, Knoop hardness reference block *For more details, please refer to the PDF document or feel free to contact us.
A new standard for inspection and measurement! Easily check for measurement anomalies regardless of type, method, or skill level.
By using residual stress reference specimens, operators can determine whether measurements are being conducted according to procedures and whether there are any abnormalities in the measuring instruments, regardless of their skill level or the type and method of the measuring equipment, and without needing to understand the complex principles of measurement. The usage is simply to measure CMRS with your measuring equipment as usual! With just this, anyone can easily check for abnormalities in measurements. CMRS offers: ■ High stress - 1600MPa (gear material) ■ Medium stress - 800MPa (spring material) ■ Low stress - 400MPa (welded structural steel) ■ Extremely low stress - less than 50MPa (gear material, spring material) The lineup is determined by combining the materials and processing conditions (such as heat treatment and peening) used by the customer, allowing you to choose reference specimens that closely resemble the actual products you will measure. Additionally, a test report detailing the measurement conditions is attached to the CMRS, enabling you to compare the instrument differences and measurement methods with your measuring equipment, thus verifying the reliability of the measurement results. Consultation is also available for materials and stresses outside the above lineup.
The sample is immersed in a 6% hydrochloric acid solution of ferrous chloride at room temperature for 96 hours, and the weight change before and after the test is measured.
We will introduce the resistance to pitting corrosion test of "SIRICOROI." First, prepare a test solution of 6% hydrochloric acid and ferric chloride solution. The test specimens are produced from various materials under different heat treatment conditions. The surface roughness is adjusted using waterproof sandpaper #400, and degreasing is performed with acetone. Then, each material is immersed in the 6% hydrochloric acid and ferric chloride solution at room temperature for 96 hours, and the weight change before and after the test is measured using a precision balance to determine the degree of corrosion. For more details, please download and view the catalog. [Test Specimens (Partial)] ■SUS304 ■SUS316L ■SUS420J2 ■SUS440C ■SUS630-H900 *For more details, please refer to the PDF materials or feel free to contact us.
The thermal conductivity of Silicoroid XVI is 11.9 W/mK! It may have an advantage in a short period of time.
This is an introduction to the hardness reduction test of age-hardened materials after holding at 700°C. The aim is to investigate the hardness reduction in a short-term high-temperature holding environment, assuming processes like brazing. Test specimens that have undergone aging treatment were placed in an electric furnace (atmospheric furnace) held at 700°C, and hardness measurements were conducted after removing them at various set times and allowing them to return to room temperature. Additional aging treatment (460°C for 4 hours in air) was performed on the same specimens, followed by re-measurement. For more details, please download and refer to the catalog. [Test Specimens] - Material: Silico Alloy XVI (round bar) φ28mm × 10mm, cut into 4 pieces - Solution Treatment: 1050°C/WQ - Preliminary Aging: 200°C for 2 hours in air - Age-Hardening Treatment: 460°C for 12 hours in air - Polishing Finish: Polished with #400 waterproof paper (oxide scale removed) *For more details, please refer to the PDF document or feel free to contact us.
![Dried Kunyit turmeric slices from Indonesia [Sample available]](https://image.mono.ipros.com/public/product/image/d2a/2001066950/IPROS85433492760740196789.jpeg?w=280&h=280)
Dried rhizome slices of Indonesian turmeric that surpass Okinawan autumn turmeric.
Turmeric (also known as Curcuma, Ukkon, or Kunyit) is a perennial herb belonging to the ginger family, Zingiberaceae. Its scientific name is Curcuma longa (syn. C. domestica). The English name is turmeric. It is native to South and Southeast Asia. The Indonesian and Malay name Kunyit (often pluralized in English as Kunyits) is also well-known in Japan. This is the dried rhizome of Kunyit turmeric, which has a curcumin content that exceeds that of autumn turmeric produced in Japan. The curcumin content of Indonesian Kunyit turmeric is about five times that of Okinawan turmeric. Tropical plants originating from tropical countries are ideally suited to their native environments. Moisture content is below 10%. It can be used as a powdered ingredient within Japan or directly in cooking.
This is a test piece for the Charpy impact test.
This is a type of test specimen with a V-shaped groove in a rectangular bar. It can be used for the Charpy impact test. The Charpy impact test involves applying a high-speed impact to the specimen to evaluate the energy required for fracture and the toughness of the specimen.
100% inspection to ensure that various hardness reference pieces meet ASTM physical requirements!
The "Wilson Hardness Reference Plates" have a comprehensive range of scales and types of hardness reference plates, making them suitable for a wide range of hardness scales related to Rockwell, Brinell, Knoop, and Vickers tests. They are made from the highest quality materials to ensure that industry standards are set, and that highly invariant and reproducible hardness reference plates can be obtained. The testing machines used in the calibration process are subjected to a rigorous monitoring process using NIST-traceable equipment. 【Features】 ■ Direct collaboration with steel mills to identify chemical composition ■ All machining (grinding, lapping, polishing) is performed in-house at calibration facilities ■ 100% inspection to ensure various hardness reference plates meet ASTM physical requirements (thickness, flatness, parallelism, surface roughness) *For more details, please refer to the PDF document or feel free to contact us.
Production of test pieces for component testing of urban mine-type industrial waste metals (spectral analysis test pieces) and metal composition testing!
We would like to introduce Yoshida Cast Industry Co., Ltd.'s "Spectral Analysis Test Samples." There are pressure-type and centrifugal-type options depending on the metal. In the case of the pressure type, it is possible to suppress the vapor of low-melting-point elements by applying pressure during the melting process. We also accommodate stirring in a vacuum upon request. Additionally, we have dedicated machines that can handle special metals such as titanium. 【Features】 ■ Compact size equipment that can be moved and installed ■ Capable of arc melting depending on the metal ■ Custom molds for test samples in desired sizes can be produced ■ Compatible with cooling mechanisms for molds ■ Melting can be done in atmospheric, vacuum, or inert gas replacement environments depending on the metal ■ In-house production and testing of metal test samples can be achieved *For more details, please refer to the related links or feel free to contact us.
We are selling adult films and DVDs in stock.
This is a test piece for a shot blast machine.
Introduction to standard hardness blocks and indenters.
We offer a wide range of indenters (indentation tips). All certified indenters come with traceable certificates that comply with internationally recognized standards according to ISO and ASTM. Additionally, we provide special adapters for indentation to expand applications. Standard hardness blocks used for indirect verification must be compatible with the workpieces tested in terms of material properties and hardness range. They are used for the annual verification and calibration of hardness testing machines (hardness testers), as well as for regular inspections and transitions to hardness testers. 【Features】 《Wide Range Indenter Tips》 ■ A wide variety of indenters available ■ Compliant with ISO and ASTM ■ Certificates provided for internationally recognized standards ■ Minimum inner diameter that can be tested is 1.5mm or 7/16 inch *For more details, please refer to the PDF materials or feel free to contact us.
Hard facing with carbide tips is possible on any shape, whether flat or curved!
"Quick Tip" is a small sintered piece made of hard metal (WC-Co) that significantly enhances the toughness of the base material surface when applied through welding. Due to the three-dimensional nature of the bonding surface, it has low peeling properties and ensures sufficient bonding strength. Additionally, the wear resistance is handled by the hard metal block, while the toughness is provided by the alloy within the minute gaps, allowing for the realization of a surface that is both hard and flexible, which has been an ideal goal. [Features] ■ High bonding strength ■ Resistant to thermal shock ■ Excellent toughness and wear resistance ■ Applicable to any shape *For more details, please refer to the PDF document or feel free to contact us.
