We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Probe.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Probe×テクノプローブ - List of Manufacturers, Suppliers, Companies and Products

Probe Product List

1～15 item / All 44 items

Displayed results
RF MEMS Probe "TP26-Angle Series"

RF MEMS Probe "TP26-Angle Series"

The connector is 3.5mm/F! The probe pitch can be selected from 50 to 1,000um!

We would like to introduce our RF_MEMS probe, the "TP26-Angle Series." The characteristic impedance is 50 ohms, and the frequency range is DC to 26.5 GHz, with an insertion loss (GSG-150um pitch typ.) of -0.4 dB. Please feel free to contact us if you have any inquiries. 【Features】 ■ Low loss, low reflection air coplanar probe design ■ Small probe footprint ■ Probe pitch selectable from 50 to 1,000 um ■ Probe repair and tip replacement available (Repair may not be possible depending on the damage condition) *For more details, please refer to the PDF document or feel free to contact us.

  • probe

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RF MEMS Probe "TP40-Angle Series"

RF MEMS Probe "TP40-Angle Series"

The withstand voltage is 100V, and the frequency range is DC to 40GHz! Probe repair and replacement of the tip are possible.

We would like to introduce our RF_MEMS probe, the 'TP40-Angle Series.' The tip parallelism is less than 5um, and the probe mark size (width) is less than 30um, with a characteristic impedance of 50ohm. Please feel free to contact us when you need assistance. 【Features】 ■ Low loss, low reflection air coplanar probe design ■ Small probe scars ■ Probe pitch selectable from 50 to 1,000um ■ Probe repair and tip chip replacement available (Repair may not be possible depending on the damage condition) *For more details, please refer to the PDF document or feel free to contact us.

  • probe

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RF MEMS Probe "TP40-Vertical Series"

RF MEMS Probe "TP40-Vertical Series"

Selectable probe pitch from 50 to 1,000 um! The insertion loss (typ. GSG-150 um pitch) is -0.6 dB.

We would like to introduce our RF_MEMS probe, the 'TP40-Vertical Series'. The connector is 2.92mm/F (K/F), and the probe configurations are GS, SG, and GSG, with a contact lifespan (when using an auto-prober) of 1 million cycles. Please feel free to contact us if you have any inquiries. 【Features】 ■ Low loss, low reflection air coplanar probe design ■ Small probe footprint ■ Probe pitch selectable from 50 to 1,000 um ■ Probe repair and tip chip replacement available (Note that repair may not be possible depending on the damage condition) *For more details, please refer to the PDF document or feel free to contact us.

  • probe

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RF MEMS Probe "TP50-Angle Series"

RF MEMS Probe "TP50-Angle Series"

The connector is 2.4mm/F! It features a low-loss, low-reflection air coplanar probe design.

We would like to introduce our RF_MEMS probe, the 'TP50-Angle Series.' The frequency range is DC to 50GHz, with an insertion loss (GSG-150um pitch typ.) of -0.6dB, and the characteristic impedance is 50 ohms. Please feel free to contact us when you need assistance. 【Features】 ■ Low loss, low reflection air coplanar probe design ■ Small probe footprint ■ Probe pitch selectable from 50 to 1,000um ■ Probe repair and tip chip replacement available (Repair may not be possible depending on the damage condition) *For more details, please refer to the PDF document or feel free to contact us.

  • probe

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RF MEMS Probe "TP50-Vertical Series"

RF MEMS Probe "TP50-Vertical Series"

The frequency range is DC to 50GHz! Probe pitch can be selected from 50 to 1,000μm.

We would like to introduce our RF_MEMS probe, the "TP50-Vertical Series." The characteristic impedance is 50 ohms, and the insertion loss (GSG-150um pitch typ.) is -0.6dB. Additionally, the connector is compatible with 2.4mm/F, and the applicable pitch ranges from 50 to 1000um. Please feel free to contact us if you have any inquiries. 【Features】 ■ Low loss, low reflection air coplanar probe design ■ Small probe footprint ■ Available probe pitch options from 50 to 1,000um ■ Probe repair and tip replacement available (Repair may not be possible depending on the damage condition) *For more details, please refer to the PDF document or feel free to contact us.

  • probe

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RF MEMS Probe "TP67-Angle Series"

RF MEMS Probe "TP67-Angle Series"

Insertion loss (GSG-150um pitch typ.) is -0.8dB! Probe pitch can be selected from 50 to 1,000um.

We would like to introduce our RF_MEMS probe, the 'TP67-Angle Series'. The connector is 1.85mm/F (V/F), with a compatible pitch range of 50 to 1000um, and the needle position accuracy is within 10um. Please feel free to contact us if you have any inquiries. 【Features】 ■ Low loss, low reflection air coplanar probe design ■ Small probe footprint ■ Available in probe pitches of 50 to 1,000um ■ Probe repair and tip chip replacement available (Repair may not be possible depending on the damage condition) *For more details, please refer to the PDF document or feel free to contact us.

  • probe

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RF MEMS Probe "TP110-Angle Series"

RF MEMS Probe "TP110-Angle Series"

The connector is 1.0mm/F, compatible pitch is 50 to 250um! Probe repair and tip replacement are possible.

We would like to introduce our RF_MEMS probe, the 'TP110-Angle Series'. The characteristic impedance is 50 ohms, and the frequency range is DC to 110 GHz, with an insertion loss (GSG-150um pitch typ.) of -1.1 dB. Please feel free to contact us if you have any inquiries. 【Features】 ■ Low loss, low reflection air coplanar probe design ■ Small probe footprint ■ Probe pitch selectable from 50 to 1,000 um ■ Probe repair and tip replacement available (Repair may not be possible depending on the damage condition) *For more details, please refer to the PDF document or feel free to contact us.

  • probe

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RF MEMS Probe "TPD40-Angle Series"

RF MEMS Probe "TPD40-Angle Series"

Selectable probe pitch from 50 to 1,000 µm! Introducing products with a frequency range of DC to 40 GHz.

We would like to introduce our RF_MEMS probe, the 'TPD40-Angle Series.' The characteristic impedance is 50 ohms, and the contact resistance (to gold pads) is 0.05 ohms, featuring a low-loss, low-reflection air coplanar probe design. Please feel free to contact us if you have any inquiries. 【Features】 ■ Low-loss, low-reflection air coplanar probe design ■ Small probe footprint ■ Probe pitch selectable from 50 to 1,000 μm ■ Probe repair and tip chip replacement available (Repair may not be possible depending on the damage condition) *For more details, please refer to the PDF document or feel free to contact us.

  • probe

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RF MEMS Probe "TPD40-Vertical Series"

RF MEMS Probe "TPD40-Vertical Series"

Insertion loss (GSGSG-150um pitch typ.) is -0.8dB! Probe repair and tip chip replacement are possible.

We would like to introduce our RF_MEMS probe, the 'TPD40-Vertical Series'. The frequency range is DC to 40GHz, with a characteristic impedance of 50 ohms. The connector is 2.92mm/F (K/F), and the probe configuration is GSSG or GSGSG. Please feel free to contact us if you have any inquiries. 【Features】 ■ Low loss, low reflection air coplanar probe design ■ Small probe footprint ■ Probe pitch selectable from 50 to 1,000 um ■ Probe repair and tip chip replacement available (Repair may not be possible depending on the damage condition) *For more details, please refer to the PDF document or feel free to contact us.

  • probe

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RF MEMS Probe "TPD50-Vertical Series"

RF MEMS Probe "TPD50-Vertical Series"

Crosstalk (typ. GSGSG-150um pitch) is -35.0dB! Introducing products with a frequency range of DC to 50GHz.

We would like to introduce our RF_MEMS probe, the 'TPD50-Vertical Series.' The connector is 2.4mm/F, and it supports pitches from 50 to 1000um, featuring a low-loss, low-reflection air coplanar probe design. Please feel free to contact us if you have any inquiries. 【Features】 ■ Low-loss, low-reflection air coplanar probe design ■ Small probe footprint ■ Available in probe pitches of 50 to 1,000um ■ Probe repair and tip chip replacement available (Repair may not be possible depending on the damage condition) *For more details, please refer to the PDF document or feel free to contact us.

  • probe

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RF MEMS Probe "TPD67-Angle Series"

RF MEMS Probe "TPD67-Angle Series"

The connector is 1.85mm/F (V/F)! It features a low-loss, low-reflection air coplanar probe design.

We would like to introduce our RF_MEMS probe, the 'TPD67-Angle Series.' The crosstalk (GSGSG-150um pitch typ.) is -35.0dB, the characteristic impedance is 50 ohms, and the frequency range is DC to 67GHz. Please feel free to contact us when you need assistance. 【Features】 ■ Low loss, low reflection air coplanar probe design ■ Small probe footprint ■ Probe pitch selectable from 50 to 1,000um ■ Probe repair and tip replacement available (Repair may not be possible depending on the damage condition) *For more details, please refer to the PDF document or feel free to contact us.

  • probe

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Document] TCS1-/TCS2- Calibration Board Manual

[Document] TCS1-/TCS2- Calibration Board Manual

±0.3% high precision load pad equipped! Custom calibration kit can be manufactured.

We would like to introduce the calibration board manual for "TCS1-/TCS2-" handled by Techno Probe Co., Ltd. It includes information such as pad size, pad pitch, pattern names, component symbols, applications, and the positions of components. The product's top view is also included, making it a useful reference when considering implementation. 【Contents】 1. Pattern List 2. Substrate Top View *For more details, please refer to the PDF document or feel free to contact us.

  • Circuit Board Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RF MEMS Probe "TPWR8"

RF MEMS Probe "TPWR8"

Small probe scar! The reflection loss (GSG-150um pitch typ.) is -10.0dB.

We would like to introduce our RF_MEMS probe 'TPWR8' that we handle. The contact life (when using an auto prober) is 1 million cycles, with a needle position accuracy within 10um and a needle tip parallelism of less than 10um. Please feel free to contact us when needed. 【Features】 ■ Low loss, low reflection air coplanar probe design ■ Small probe marks ■ Probe pitch selectable from 50 to 1,000um ■ Probe repair and tip chip replacement available (Note: Repair may not be possible depending on the damage condition) *For more details, please refer to the PDF document or feel free to contact us.

  • probe

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RF MEMS Probe "WR6-Tall Series"

RF MEMS Probe "WR6-Tall Series"

Small probe scar! The reflection loss (GSG-150um pitch typ.) is -10.0dB.

We would like to introduce our RF_MEMS probe, the "WR6-Tall Series." The contact resistance (to the gold pad) is 0.05 ohms, the needle position accuracy is within 10 micrometers, and the needle tip parallelism is less than 10 micrometers. Please feel free to contact us when you need assistance. 【Features】 ■ Low loss, low reflection air coplanar probe design ■ Small probe footprint ■ Probe pitch selectable from 50 to 1,000 micrometers ■ Probe repair and tip chip replacement available (Repair may not be possible depending on the damage condition) *For more details, please refer to the PDF document or feel free to contact us.

  • probe

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Data] TCS3-150-2 Calibration Board Instruction Manual

[Data] TCS3-150-2 Calibration Board Instruction Manual

SOLT/TRL calibrator! Introducing the pattern list and substrate top view.

This document includes the component symbols for the calibration substrate "TCS3-150-2" with a pad pitch of 150μm. It introduces pattern names such as Open, Short, Load, and Line TH. It is a simple and easy-to-reference book. Please take a moment to read it. 【Contents (partial)】 ■ Pattern Names ■ Component Symbols ■ Applications ■ Component Positions *For more details, please refer to the PDF document or feel free to contact us.

  • Printed Circuit Board

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Probe

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.