Release Agent Product List and Ranking from 79 Manufacturers, Suppliers and Companies

Water-based release agent for building materials "NSH Series"

Chemical assistant that solves problems in the production site! Total technology of industrial chemicals cultivated over many years.

We would like to introduce our water-based release agents for building materials, the "NSH Series." The "for calcium silicate board flexible board" prevents release during pressing of calcium silicate boards and flexible boards, as well as blocking after autoclaving. We offer both water-soluble emulsion (O/W) and inverse emulsion (W/O) types. In addition, we also have products for "siding boards" and "concrete." Nisshin Chemical Research Institute aims to be a chemical assistant that constantly solves the problems faced in production sites. Our engineers, who possess specialized knowledge in chemistry, will visit you to clarify the issues at hand and propose suitable chemicals for your company. Please feel free to contact us for inquiries or consultations. 【Product Lineup】 ■ For calcium silicate board flexible board ■ For siding boards ■ For concrete *For more details, please refer to the PDF document or feel free to contact us.

Company：NISSIN KAGAKU KENKYUSHO Takatsuki Main Factory
Price：Less than 10,000 yen

Chemicals
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"Stractor" release agent for mandrels

It enhances productivity by facilitating smooth pushing and pulling operations of the mandrel under harsh conditions such as bending and temperature.

In the manufacturing of hose using a mandrel (core material), there is a need to perform operations of pushing in and pulling out the mandrel before and after vulcanization, or in a semi-vulcanized state. Therefore, it is necessary to treat the mandrel with an appropriate liquid lubricant in advance to facilitate these operations. Stractol products (MR series) possess properties that enhance productivity and allow for smooth operations under harsh conditions of bending and temperature.

Company：エスアンドエスジャパン
Price：Other

Chemicals
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

FRP Special Matte Release Agent Copper F

Powerful release and beautiful matte finish products can be achieved simultaneously just by spraying.

Matte Release Agent Copper F allows you to create matte products simply by applying it to your existing glossy mold. It can be easily removed with a damp cloth, allowing you to return to the original glossy mold and create a uniquely elegant matte surface. You can consistently produce the same product, and it can even be applied over release wax (though this may vary by type). 【Features】 - Simultaneously achieves release and matte products - Can finish a standard glossy mold into a matte product - Returns to the original glossy mold with just a wipe - Creates a beautiful matte surface that cannot be achieved with textured molds For more details, please contact us.

Company：伏見
Price：Other

Other consumables
Release Agent

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Approximately 2 hours of simple installation! Resolve manhole pump clogging issues!

No major changes needed inside the manhole! Only catch the debris that gets tangled in the pump, while grinding up water-soluble paper and waste!

The manhole pump clog prevention device "GENTI SHOOT" removes entangled debris and protects the manhole pump. It catches only non-woven fabric and insoluble substances that entangle the pump in advance, while grinding up soluble paper and waste! It dramatically resolves clogging issues with drainage pumps. The bottom cover is removable for easy cleaning. 【Features】 - Significantly reduces the need for after-hours responses, such as during the middle of the night. - Catches only the debris that entangles the pump, while grinding up water-soluble paper and waste. - Can be installed with approximately 2 hours of simple work (just driving in anchor bolts). - Made entirely of stainless steel, making it resistant to rust. For more details, please contact us or download the catalog.

Company：サンリョウ
Price：100,000 yen-500,000 yen

Wastewater/wastewater treatment equipment
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

TK-style blue sea oil fence

Ministry of Land, Infrastructure, Transport and Tourism approved product! We also accept the creation of oil fences tailored to the site environment.

Kōkai Kyumei Kigu Co., Ltd. handles the "TK Type Blue Sea Oil Fence." The oil fence is deployed in water areas to prevent and remove oil spills caused by accidents at oil storage facilities such as refineries and oil terminals, as well as tankers and mooring facilities. It complies with the Marine Pollution Prevention Act and the obligation to equip specific oil pollution control materials to prevent marine pollution and maritime disasters. *For more details, please refer to the PDF materials or feel free to contact us.

Company：高階救命器具
Price：Other

Food environmental hygiene/contamination prevention equipment
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Portable compact-sized oil fence "T-6HD"

For those struggling with storage space for oil fences! The reusable expandable oil fence "T-6 HD Oil Fence" that can be returned to its case.

The "T-6 HD Oil Fence" is a reusable inflatable oil fence that combines ease of use, lightweight, and compactness (it can be returned to its case). The special sponge built into the float section expands upon absorbing water. No tools are required, allowing for quick deployment by a small team. It is perfect for those who have limited storage space and for initial response during oil spill incidents! 【Features】 - The special sponge built into the float section expands within 5 minutes after absorbing water. - It contains oil and prevents further damage. - It is suitable for space-saving storage. - Deploying 15 meters takes about 15 minutes with two people. *For more details, please refer to the PDF document or feel free to contact us.

Company：高階救命器具
Price：Other

Food environmental hygiene/contamination prevention equipment
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Features of T-6HD Oil Fence: Compact

A size that can be packed into a storage case and is convenient for transport in a vehicle.

We would like to introduce the features of our "T-6HD Oil Fence." The conventional simple oil fence has a volume (packaging size) of 0.35㎥ (0.7×1.0×0.5m). The "T-6HD Oil Fence" has a volume (packaging size) of 0.168㎥ (0.4×0.6×0.7m). When stored in its case, it is approximately one-third the size of the conventional type, making it possible to carry a certain number on small vessels. 【Usage Locations and Applications】 - Accident response for oil spills - Stockpiling in factories - Disaster preparedness stockpiling - Handling of maritime accidents and vehicle submersion incidents *This is not a legally compliant product. *For more details, please refer to the PDF document or feel free to contact us.

Company：高階救命器具
Price：Other

Food environmental hygiene/contamination prevention equipment
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Heat resistance, lubrication, and smoothness functions! Silicone-based aerosol spray.

With a sustainable type, a quick spray will provide smoothness, lubrication, and shine.

"Asahi Silicone Aerosol 501P" is an aerosol spray type silicone release agent. Due to the properties of silicone oil, it offers heat resistance, lubrication, smoothness, and shine, and it has durability thanks to the use of high polymer silicone oil. [Applications] Release agent during the molding process of rubber and plastic Lubrication and prevention of chipping for various cutters and blades Smoothing for spinning and knitting machines, sock setting machines Paper processing, printing, bookbinding

Company：旭染料製造本社
Price：Less than 10,000 yen

Resin processing machine
Other factory equipment
Lubricants
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release agent for food container packaging "Asahi Silicone Lubricant 229"

Introducing a release agent that contains no substances designated as environmental hormones and is also considerate of the environment!

"Asahi Silicon Lubricant 229" is a product developed as a release agent for various plastics, including PET, PP, and PS, during molding. All raw materials comply with the self-regulatory standards of the Polyolefin Plastics Association, making it suitable for use as a release agent in food container packaging. Additionally, it is effective as a general release agent for rubber and plastics beyond the aforementioned types. 【Features】 - Contains no substances designated as endocrine disruptors, making it an environmentally friendly release agent. - Excellent dilution stability, with no concerns about oil spots or gum buildup. - Complies with the self-regulatory standards of the Polyolefin Plastics Association, ensuring safe use. - Target Resins: - Polyethylene Terephthalate, Polyethylene, Polypropylene, Polystyrene, AS resin, ABS resin, Methacrylic resin. *For more details, please refer to the PDF materials or feel free to contact us.*

Company：旭染料製造本社
Price：Other

Other polymer materials
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Paint coating and adhesion are possible after demolding! Spray-type release agent.

Aerosol release agent in spray form, equipped with excellent properties such as heat resistance, lubrication, smoothness, and gloss.

"Asahi Silicone Aerosol 520P" is an aerosol release agent made from alkyl-modified silicone oil in a spray form. After release, it allows for painting and adhesion, possessing excellent properties such as heat resistance, lubrication, smoothness, and gloss due to the silicone oil. It is used for a wide range of applications including release and glossing of various rubbers, plastics, and metals, lubrication of various cutters, and smoothing of fibers. 【Features】 ■ After normal cleaning of products such as plastics and rubbers, it enables plating and solvent-based painting after release. ■ It has a concentrated spray type that minimizes dispersion into the air, allowing for application to the fine details of the substrate. ■ It excels in heat resistance and provides excellent gloss without leaving impurities or dirt on molded items during plastic release. *For more details, please download the PDF or contact us.

Company：旭染料製造本社
Price：Less than 10,000 yen

Lubricants
Chemicals
Other consumables
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release Agent Yushiron Foam *Comprehensive catalog available for free!

We offer a diverse lineup of release agents that combine excellent lubricity and anti-seizing properties!

"Yushiron Form" is a release agent from Yushiro Chemical Industry Co., Ltd., which handles metalworking oils and building maintenance products. We offer a diverse lineup including the water-based optimal application release agent "CENTRAY Lube-100," which maintains the advantages of both oil-based and water-dilutable types, and the small-amount application release agent "SRT 200," which combines excellent lubrication and anti-seizing properties. 【Features】 ≪CENTRAY LUBE-100≫ 　■ One-tenth the application amount of water-dilutable types 　■ Outstanding cooling properties improve seizing 　■ Contains newly developed cooling accelerators ≪SRT 200≫ 　■ Excellent lubrication 　■ Improves seizing 　■ Usable across a wide temperature range, eliminating the need to change release agents based on mold temperature *For more details, please refer to the PDF document or feel free to contact us.

Company：ユシロ
Price：Other

others
Other consumables
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

CFRP-specific water-based release agent "Yushiron Foam" SRT700W

CFRP-specific water-based release agent "Yushiron Foam" solves various problems occurring in the molding and processing of carbon fiber reinforced resin [Catalog available].

This is the water-based release agent "Yushiron Foam" specifically designed for CFRP, handled by Yushiro Chemical Industry Co., Ltd., which deals in metalworking oils and building maintenance products. It solves various issues arising from the molding and processing of carbon fiber reinforced plastics. 【Features】 ◆ Enables high-precision molding ◆ Reduces molding costs ◆ Molding and processing of GFRP (glass fiber reinforced plastic) is also possible *For more details, please refer to the catalog or feel free to contact us.

Company：ユシロ
Price：Other

Cutting Oil
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Supporting biomass research and development! Media-free wet high-pressure micronization equipment!

The goal that the world aims for is a "sustainable society"! It can be used for research and development of cellulose nanofibers! It can be defibrated at a maximum of 250 MPa!

For researchers and developers involved in nanotechnology, the uniformity and stabilization of insoluble substances and particles is one of the challenges. When reduced to the molecular level, the properties of substances change. This change in properties holds the potential to achieve what was once called "an extremely difficult task." In the near future, technologies that were once part of the world of science fiction, such as AI, blockchain, IoT, cloud computing, 5G, autonomous driving, and 3D printing, are becoming a reality. Innovation is accelerating across all fields, including electronic components, pharmaceuticals, cosmetics, food, new materials, and chemical products. At the same time, there is growing attention on achieving a "sustainable" society, including clean energy and carbon neutrality. Behind this innovation lies the wisdom passed down from predecessors and the tireless efforts of researchers and developers currently striving for progress. The Systemizer Mini plays the role of an assistant for researchers and developers in their immense trial and error process. *For more details, please refer to the catalog.

Company：システムサポート
Price：Other

Emulsifier/Disperser
Fine grinding machine
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Support for research and development of high-performance materials! Media-less wet high-pressure micronization equipment!

The world's goal is a "sustainable society"! It can be used for research and development of cellulose nanofibers! It can be defibrated at up to 250 MPa!

For researchers and developers involved in nanotechnology, the uniformity and stabilization of insoluble substances and particles is one of the challenges. When materials are reduced to the molecular level, their properties change. This change in material properties holds the potential to achieve what was once considered "an extremely difficult task." In the near future, technologies that were once part of science fiction, such as AI, blockchain, IoT, cloud computing, 5G, autonomous driving, and 3D printing, are becoming a reality. Innovation is accelerating across all fields, including electronic components, pharmaceuticals, cosmetics, food, new materials, and chemical products. At the same time, there is growing attention on achieving a "sustainable" society, including clean energy and carbon neutrality. Behind this innovation lies the wisdom passed down from predecessors and the tireless efforts of researchers and developers currently striving for progress. The Systemizer Mini serves as an assistant for researchers and developers in their tremendous trial and error process. *For more details, please refer to the catalog.

Company：システムサポート
Price：Other

Emulsifier/Disperser
Fine grinding machine
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Support for CNF research and development! Media-free wet high-pressure pulverization equipment!

The goal the world aims for is a "sustainable society"! It can be used for research and development of cellulose nanofibers! It can be defibrated at a maximum of 250 MPa!

For researchers and developers involved in nanotechnology, the uniformity and stabilization of insoluble substances and particles is one of the challenges. When reduced to the molecular level, the properties of materials change. This change in material properties holds the potential to achieve what was once considered "an extremely difficult task." In the near future, technologies that were once the realm of science fiction, such as AI, blockchain, IoT, cloud computing, 5G, autonomous driving, and 3D printing, are becoming a reality. Innovation is accelerating across all fields, including electronic components, pharmaceuticals, cosmetics, food, new materials, and chemical products. At the same time, there is growing attention on achieving a "sustainable" society, including clean energy and carbon neutrality. Behind this innovation lies the wisdom passed down from predecessors and the tireless efforts of researchers and developers currently striving for progress. The Systemizer Mini serves as an assistant for researchers and developers in their immense trial and error process. *For more details, please refer to the catalog.*

Company：システムサポート
Price：Other

Emulsifier/Disperser
Fine grinding machine
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Support for research and development of coating agents! Wet high-pressure micronization equipment!

For the improvement of bioavailability! It can be used for the research and development of OD tablets and orally disintegrating tablets! It disintegrates at a maximum of 250 MPa!

For researchers and developers involved in nanotechnology, the uniformity and stabilization of insoluble substances and particles is one of the challenges. When materials are reduced to the molecular level, their properties change. This change in material properties holds the potential to realize what was once deemed "an extremely difficult task." In the near future, technologies that were once the realm of science fiction, such as AI, blockchain, IoT, cloud computing, 5G, autonomous driving, and 3D printing, are becoming a reality. Innovation is accelerating across all fields, including electronic components, pharmaceuticals, cosmetics, food, new materials, and chemical products. At the same time, there is growing attention on achieving a "sustainable" society, including clean energy and carbon neutrality. Behind this innovation lies the wisdom passed down from predecessors and the tireless efforts of researchers and developers who are currently striving. The Systemizer Mini serves as an assistant for researchers and developers in their immense trial and error process. *For more details, please refer to the catalog.

Company：システムサポート
Price：Other

Emulsifier/Disperser
Fine grinding machine
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Supporting the research and development of industrial inks! Micronization through fluid friction shear force!!

The goal that the world aims for: "A sustainable society"! It can be used for research and development of screen inks, paints, and color resists!

For researchers and developers involved in nanotechnology, the uniformity and stabilization of insoluble substances and particles is one of the challenges. When reduced to the molecular level, the properties of substances change. This change in properties holds the potential to achieve what was once considered "an extremely difficult task." In the near future, technologies that were once part of science fiction, such as AI, blockchain, IoT, cloud computing, 5G, autonomous driving, and 3D printing, are becoming a reality. Innovation is accelerating across all fields, including electronic components, pharmaceuticals, cosmetics, food, new materials, and chemical products. At the same time, there is growing attention on achieving a "sustainable" society through clean energy and carbon neutrality. Behind this innovation lies the wisdom passed down from predecessors and the tireless efforts of researchers and developers currently striving for progress. The Systemizer Mini plays a role as an assistant for the researchers' immense trial and error process. *For more details, please refer to the catalog.*

Company：システムサポート
Price：Other

Emulsifier/Disperser
Fine grinding machine
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Support for CNF research and development! Media-free wet high-pressure micronization equipment!

It can be used for research and development of candidate materials for next-generation electric vehicle batteries, "cellulose nanofibers"! It can be defibrated at up to 250 MPa!

Research teams from Brown University, the University of Maryland, and the University of Tokyo have developed a candidate material for the solid electrolyte of next-generation solid-state batteries, which are considered essential for electric vehicles (EVs), using cellulose nanofibers (CNF) derived from trees. The results were published in the British scientific journal "Nature." Cellulose typically does not conduct ions. In contrast, it has been demonstrated that lithium ions can move rapidly through a solid material made of copper and CNF, which was created by immersing CNF in a copper alkali solution. The reason for this is that the spacing between the linear polymer chains of CNF is expanded by binding with copper ions, creating pathways that allow lithium ions to pass through smoothly. Additionally, it is said that its ability to transport ions is 10 to 100 times higher compared to other polymer ion conductors. Furthermore, leveraging its characteristics as an ion conductor, there is potential for it to be used as a binder for the positive electrode in solid-state batteries. Other advantages include its low environmental impact and higher strength and flexibility compared to ceramic materials, which are commonly used in many solid electrolytes under research and development. *For more details, please refer to the catalog.*

Company：システムサポート
Price：Other

Emulsifier/Disperser
Fine grinding machine
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Concentrated Coating Release Agent "WFR Series"

A revolutionary new oil-based release agent that achieves quality improvement and cost reduction!

The "WFR Series" is a release agent developed for die casting that is applied in liquid form. It is less affected by the Leidenfrost effect, which inhibits the adhesion of release agents at high temperatures, allowing it to adhere effectively even in high-temperature molds with a small amount. Additionally, it demonstrates excellent adhesion across all temperature ranges, enabling minimal application, and further improvements in adhesion and reductions in application volume can be achieved by using electrostatic coating technology. 【Features】 ■ Compatible with high temperature ranges above 300°C ■ Significant reduction in mold cracking ■ Excellent friction characteristics ■ High anti-seizing effect ■ Non-flammable and safe *For more details, please refer to the catalog or feel free to contact us.

Company：青木科学研究所
Price：Other

Other consumables
Cutting Oil
Lubricants
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Inorganic powder-containing liquid release agent "NPL Series"

Inherits the features of the "WFR series"! It has excellent water flow characteristics and outstanding release properties.

The "NPL Series" is a release agent with inorganic powder that allows for a small amount of application even on high-temperature molds, demonstrating the thermal insulation properties of the powder without the need for temperature control equipment, thus not lowering the mold temperature. The contained powder forms a uniform release film along the contours of the mold. As a result, the contact with the molten metal becomes "point contact," promoting the flow and circulation of the molten metal. Additionally, the space created by the release film formed along the contours and the porous powder allows for good gas escape, enabling a smooth casting surface. 【Features】 ■ Inherits the characteristics of the "WFR Series" ■ Thermal insulation properties applied from coating technology ■ Allows for a small amount of application even on high-temperature molds ■ Does not lower mold temperature without using temperature control equipment ■ Fully demonstrates the thermal insulation properties of the powder *For more details, please refer to the PDF document or feel free to contact us.

Company：青木科学研究所
Price：Other

others
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Product Catalog for Coating and Release Agents for Aluminum Casting (GDC/LPDC) Molds

Release agents and coatings developed by our specialists who are experts in aluminum casting.

This catalog features the "Aluminum Casting (GDC/LPDC) Mold Release Agents" handled by Honda Metal Technology Co., Ltd., a comprehensive manufacturer of lightweight metal alloy components. We offer various products, including the mold release agent "LNO," which eliminates galling and seizure in areas with minimal draft angles and in the constantly high-temperature regions such as the runner and gate, as well as "DOG-M," which ensures good flow of molten metal and maintains excellent casting surface quality even with fine surface roughness. [Contents] ■ Mold Release Agents ■ Coating Agents for Runners and Risers (Insulating Agents) ■ Coating Agents for Mold Components *For more details, please download the PDF or feel free to contact us.

Company：本田金属技術本社
Price：Other

Coating Agent
Repair Agent
Other consumables
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

SELLARS: "Water, Oil, and Liquid" Absorbent Material Special Feature

The absorbent materials from 【SELLARS】 are making a big impact in the cleaning and maintenance field! Essential items for any site using oil, including oil-only and oil & liquid absorbents!

SELLARS is a major American manufacturer founded in 1985 that produces towels, wipers, absorbents, and more using recycled fibers. Their products are primarily used in the cleaning and maintenance sectors and are highly active in factories and sites across North America and Europe. At ESCO, we offer oil-specific absorbents and oil & liquid absorbents. You can choose from sheet types, roll types, and sizes that fit drum cans, tailored to your needs. These absorbents can be placed under machine tools to address leaking oil, making them ideal for maintenance of machines and vehicles that use oil! They help prevent the spillage of hazardous liquids, including oil, and protect the environment. [Wide Range of Applications] - For oil management measures for machines and equipment in manufacturing and processing lines - To prevent floor contamination during oil changes - For maintenance of automobiles and bicycles *For more details, please refer to the PDF materials or feel free to contact us. *Purchases are also available through the 'ESCO Online Shop' aimed at corporate users.

Company：エスコ
Price：Other

others
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release agent "Metaforum Oil-based"

Release agent for secondary processing made primarily from natural oil fats! Four types with various features are available!

The release agent "Fat-based Paintable Type" is a secondary processing release agent primarily made from natural oil and fat raw materials. We offer four grades, each with various features. 【Lineup】 ■ "101" A representative product as a release agent for general-purpose resins ■ "307" Minimal grease residue and slight resin impact ■ "107" Minimal stickiness and bleeding, resulting in good product finish ■ "LM-1" A fat-based active type *For more details, please download the PDF or feel free to contact us.

Company：複合資材
Price：Other

Other consumables
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release agent "Metaforum Silicone-based"

A release agent with excellent release properties primarily made of silicone! We offer four types with various features!

The release agent "Silicone-based" is a release agent that excels in release properties, with silicone as its main component. We offer four types, each with various features. 【Lineup】 ■ "CL" Excellent release and durability ■ "CL-1" Environmentally friendly product without solvents ■ "CL-2" General-purpose silicone release agent ■ "Silicone Spray" Contains no solvents and excels in slip and water repellency *For more details, please download the PDF or feel free to contact us.

Company：複合資材
Price：Other

Other consumables
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release agent "Metaform Fluorine-based"

A release agent that excels in the finish of products primarily composed of fluorine! We offer four types with various features!

The release agent "Fluorine-based" contains fluorine-based components, has low migration, and provides excellent product finish. We offer four types with various features. 【Lineup】 ■ "FB" A representative product that excels in releasing general-purpose resins among fluorine-based release agents. ■ "FX" Free of silicone / Provides excellent product finish. ■ "FT" Contains modified silicone. Particularly provides excellent product finish. ■ "FZ" Contains silicone / Provides excellent product finish. *For more details, please download the PDF or feel free to contact us.

Company：複合資材
Price：Other

Other consumables
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release agent "Metaform Special Type"

Release agents made from modified silicone and powders! We offer three types with various features!

The release agent "Special Type" is a unique release agent that contains special components. We offer three types, each with various features. 【Lineup】 ■ "BS" has no stickiness and provides a good finish ■ "MC-5" excels in release properties ■ "ME" is a powder, so there is no stickiness / provides a good finish for products *For more details, please download the PDF or feel free to contact us.

Company：複合資材
Price：Other

Other consumables
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release agent for molding type 'BENTOGLISS 121'

With a high release effect, it is also possible to significantly reduce the amount used! It also acts as a corrosion inhibitor for molds.

"BENTOGLISS 121" is a non-solvent, oil-based release agent for sand molds that does not use solvents such as kerosene. It can be used with all sand mold molding machines. Even if excessively applied to the main mold, it does not cause casting defects and does not obscure the letters or symbols on the resin parts or molds. Since it does not contain kerosene (kerosene), it is particularly environmentally friendly and harmless to humans. 【Features】 ■ Suitable for sand molds ■ Does not contain silicone ■ Does not cause allergic reactions ■ Does not contain aromatic compounds ■ Usable with all sand mold molding machines *For more details, please refer to the PDF document or feel free to contact us at info.japan@ask-chemicals.com.

Company：ASKケミカルズジャパン
Price：Other

Chemicals
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release agent for rubber and thermosetting resin "Cure Coat"

Over 200 ℃ - High-temperature mold compatible! A wide range of release agents for rubber and thermosetting resins available.

"Cure Coat" is a product of Chukyo Chemical Industry, which develops, manufactures, and sells lubricants and release agents. It is suitable for high-temperature molds over 200°C and can accommodate silicone rubber, general-purpose rubber, and weather strips. It is ideal for use with peroxide-cured rubber, general-purpose rubber, and thermoplastic elastomers. Additionally, it includes a lineup of resin compound types such as the "RM series." [Features] ■ Suitable for over 200°C ■ Compatible with high-temperature molds ■ Compatible with silicone rubber and weather strips *For more details, please refer to the PDF document or feel free to contact us.

Company：中京化成工業
Price：Other

others
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Rubber and thermosetting resin release agent "Rush Coat"

High release performance and excellent durability! Release agent for water-soluble rubber and thermosetting resins.

"Rush Coat" is a product of Chukyo Chemical Industry, which develops, manufactures, and sells lubricants and release agents. It has excellent release performance, outstanding durability, and heat resistance, preventing mold contamination. The lineup includes the fluorine and silicone type "FS Series." 【Features】 ■ High release performance ■ Excellent durability ■ Excellent heat resistance ■ Improved leveling properties ■ Prevention of mold contamination *For more details, please refer to the PDF document or feel free to contact us.

Company：中京化成工業
Price：Other

others
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Plant-based oil release agent "Pericoat S Series"

Excellent secondary processing properties! A plant-based release agent that contains no silicone oil at all.

The "Pericoat S Series" is a paintable type of release agent primarily composed of vegetable oils and fats. It has excellent secondary processing properties and does not contain any silicone oil. The release agent adhered to molded products can be removed with general-purpose cleaning agents such as petroleum-based or alcohol-based cleaners. 【Features】 ■ Main component is vegetable oils and fats ■ Paintable type ■ Excellent secondary processing properties ■ Does not contain any silicone oil *For more details, please refer to the PDF document or feel free to contact us.

Company：中京化成工業
Price：Other

others
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release Agent Product List and Ranking from 79 Manufacturers, Suppliers and Companies | IPROS GMS

Release Agent Manufacturer, Suppliers and Company Rankings

Release Agent Product ranking