We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Release Agent.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Release Agent Product List and Ranking from 77 Manufacturers, Suppliers and Companies | IPROS GMS

Last Updated： Aggregation Period:May 06, 2026～Jun 02, 2026
This ranking is based on the number of page views on our site.

Release Agent Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:May 06, 2026～Jun 02, 2026
This ranking is based on the number of page views on our site.

  1. フロロテクノロジー Aichi//Chemical
  2. 中京化成工業 Aichi//Other manufacturing
  3. 中国興業 Hiroshima//Petroleum and coal products
  4. 4 システムサポート Osaka//Other manufacturing
  5. 5 寺田 Tokyo//Electronic Components and Semiconductors
Go to Company Ranking

Release Agent Product ranking

Last Updated： Aggregation Period:May 06, 2026～Jun 02, 2026
This ranking is based on the number of page views on our site.

  1. Aerosol-type fluorine-based high-performance release agent "Mold Free" free of regulated substances. フロロテクノロジー
  2. High-performance release agent "Continuous molding possible" "For resin and rubber" "Dry non-transfer" フロロテクノロジー
  3. Teradite Release Agent MO-7 寺田
  4. 4 Plant-based oil release agent "Pericoat S Series" 中京化成工業
  5. 5 Release agent rubber molding case: Successful continuous molding that is difficult with conventional release agents. フロロテクノロジー

Release Agent Product List

61～90 item / All 283 items

Displayed results
Release agent "Metaforum Oil-based"

Release agent "Metaforum Oil-based"

Release agent for secondary processing made primarily from natural oil fats! Four types with various features are available!

The release agent "Fat-based Paintable Type" is a secondary processing release agent primarily made from natural oil and fat raw materials. We offer four grades, each with various features. 【Lineup】 ■ "101" A representative product as a release agent for general-purpose resins ■ "307" Minimal grease residue and slight resin impact ■ "107" Minimal stickiness and bleeding, resulting in good product finish ■ "LM-1" A fat-based active type *For more details, please download the PDF or feel free to contact us.

  • Other consumables
  • Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Release agent "Metaforum Silicone-based"

Release agent "Metaforum Silicone-based"

A release agent with excellent release properties primarily made of silicone! We offer four types with various features!

The release agent "Silicone-based" is a release agent that excels in release properties, with silicone as its main component. We offer four types, each with various features. 【Lineup】 ■ "CL" Excellent release and durability ■ "CL-1" Environmentally friendly product without solvents ■ "CL-2" General-purpose silicone release agent ■ "Silicone Spray" Contains no solvents and excels in slip and water repellency *For more details, please download the PDF or feel free to contact us.

  • Other consumables
  • Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Release agent "Metaform Fluorine-based"

Release agent "Metaform Fluorine-based"

A release agent that excels in the finish of products primarily composed of fluorine! We offer four types with various features!

The release agent "Fluorine-based" contains fluorine-based components, has low migration, and provides excellent product finish. We offer four types with various features. 【Lineup】 ■ "FB" A representative product that excels in releasing general-purpose resins among fluorine-based release agents. ■ "FX" Free of silicone / Provides excellent product finish. ■ "FT" Contains modified silicone. Particularly provides excellent product finish. ■ "FZ" Contains silicone / Provides excellent product finish. *For more details, please download the PDF or feel free to contact us.

  • Other consumables
  • Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Release agent "Metaform Special Type"

Release agent "Metaform Special Type"

Release agents made from modified silicone and powders! We offer three types with various features!

The release agent "Special Type" is a unique release agent that contains special components. We offer three types, each with various features. 【Lineup】 ■ "BS" has no stickiness and provides a good finish ■ "MC-5" excels in release properties ■ "ME" is a powder, so there is no stickiness / provides a good finish for products *For more details, please download the PDF or feel free to contact us.

  • Other consumables
  • Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Heat resistance, lubrication, and smoothness functions! Silicone-based aerosol spray.

Heat resistance, lubrication, and smoothness functions! Silicone-based aerosol spray.

With a sustainable type, a quick spray will provide smoothness, lubrication, and shine.

"Asahi Silicone Aerosol 501P" is an aerosol spray type silicone release agent. Due to the properties of silicone oil, it offers heat resistance, lubrication, smoothness, and shine, and it has durability thanks to the use of high polymer silicone oil. [Applications] Release agent during the molding process of rubber and plastic Lubrication and prevention of chipping for various cutters and blades Smoothing for spinning and knitting machines, sock setting machines Paper processing, printing, bookbinding

  • DSCF0384 (2).JPG
  • Resin processing machine
  • Other factory equipment
  • Lubricants
  • Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Release agent for food container packaging "Asahi Silicone Lubricant 229"

Release agent for food container packaging "Asahi Silicone Lubricant 229"

Introducing a release agent that contains no substances designated as environmental hormones and is also considerate of the environment!

"Asahi Silicon Lubricant 229" is a product developed as a release agent for various plastics, including PET, PP, and PS, during molding. All raw materials comply with the self-regulatory standards of the Polyolefin Plastics Association, making it suitable for use as a release agent in food container packaging. Additionally, it is effective as a general release agent for rubber and plastics beyond the aforementioned types. 【Features】 - Contains no substances designated as endocrine disruptors, making it an environmentally friendly release agent. - Excellent dilution stability, with no concerns about oil spots or gum buildup. - Complies with the self-regulatory standards of the Polyolefin Plastics Association, ensuring safe use. - Target Resins: - Polyethylene Terephthalate, Polyethylene, Polypropylene, Polystyrene, AS resin, ABS resin, Methacrylic resin. *For more details, please refer to the PDF materials or feel free to contact us.*

  • Other polymer materials
  • Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Paint coating and adhesion are possible after demolding! Spray-type release agent.

Paint coating and adhesion are possible after demolding! Spray-type release agent.

Aerosol release agent in spray form, equipped with excellent properties such as heat resistance, lubrication, smoothness, and gloss.

"Asahi Silicone Aerosol 520P" is an aerosol release agent made from alkyl-modified silicone oil in a spray form. After release, it allows for painting and adhesion, possessing excellent properties such as heat resistance, lubrication, smoothness, and gloss due to the silicone oil. It is used for a wide range of applications including release and glossing of various rubbers, plastics, and metals, lubrication of various cutters, and smoothing of fibers. 【Features】 ■ After normal cleaning of products such as plastics and rubbers, it enables plating and solvent-based painting after release. ■ It has a concentrated spray type that minimizes dispersion into the air, allowing for application to the fine details of the substrate. ■ It excels in heat resistance and provides excellent gloss without leaving impurities or dirt on molded items during plastic release. *For more details, please download the PDF or contact us.

  • Lubricants
  • Chemicals
  • Other consumables
  • Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Product Catalog for Coating and Release Agents for Aluminum Casting (GDC/LPDC) Molds

Product Catalog for Coating and Release Agents for Aluminum Casting (GDC/LPDC) Molds

Release agents and coatings developed by our specialists who are experts in aluminum casting.

This catalog features the "Aluminum Casting (GDC/LPDC) Mold Release Agents" handled by Honda Metal Technology Co., Ltd., a comprehensive manufacturer of lightweight metal alloy components. We offer various products, including the mold release agent "LNO," which eliminates galling and seizure in areas with minimal draft angles and in the constantly high-temperature regions such as the runner and gate, as well as "DOG-M," which ensures good flow of molten metal and maintains excellent casting surface quality even with fine surface roughness. [Contents] ■ Mold Release Agents ■ Coating Agents for Runners and Risers (Insulating Agents) ■ Coating Agents for Mold Components *For more details, please download the PDF or feel free to contact us.

  • Coating Agent
  • Repair Agent
  • Other consumables
  • Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
SELLARS: "Water, Oil, and Liquid" Absorbent Material Special Feature

SELLARS: "Water, Oil, and Liquid" Absorbent Material Special Feature

The absorbent materials from 【SELLARS】 are making a big impact in the cleaning and maintenance field! Essential items for any site using oil, including oil-only and oil & liquid absorbents!

SELLARS is a major American manufacturer founded in 1985 that produces towels, wipers, absorbents, and more using recycled fibers. Their products are primarily used in the cleaning and maintenance sectors and are highly active in factories and sites across North America and Europe. At ESCO, we offer oil-specific absorbents and oil & liquid absorbents. You can choose from sheet types, roll types, and sizes that fit drum cans, tailored to your needs. These absorbents can be placed under machine tools to address leaking oil, making them ideal for maintenance of machines and vehicles that use oil! They help prevent the spillage of hazardous liquids, including oil, and protect the environment. [Wide Range of Applications] - For oil management measures for machines and equipment in manufacturing and processing lines - To prevent floor contamination during oil changes - For maintenance of automobiles and bicycles *For more details, please refer to the PDF materials or feel free to contact us. *Purchases are also available through the 'ESCO Online Shop' aimed at corporate users.

  • others
  • Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-performance synthetic gear oil "Centrobuz SEM-G320"

High-performance synthetic gear oil "Centrobuz SEM-G320"

By adding additives, energy loss is reduced, enabling high-efficiency operation.

The "SANTORUBS SEM-G320" is a high-performance industrial gear oil that excels in viscosity index and wear resistance, allowing for long-term use of machinery. It has good compatibility with sealing materials, making machine maintenance easy. It offers superior thermal stability and oxidation stability compared to mineral oil-based industrial gear oils. Additionally, by adding additives, it has become possible to achieve even more efficient operation. 【Features】 ■ Excellent thermal stability and oxidation stability ■ Reduced energy loss due to the addition of additives ■ Enables high-efficiency operation ■ Superior rust prevention, water separation, and defoaming properties due to the formulation of additives ■ Good compatibility with sealing materials, making machine maintenance easy *For more details, please refer to the PDF document or feel free to contact us.

  • Other consumables
  • Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Research and development support for cable processing products tailored to development periods and budgets.

Research and development support for cable processing products tailored to development periods and budgets.

We support research institutions and development projects. This is a new service for those working at universities and research institutions with limited development periods and budgets.

If you have any issues regarding coaxial cables and coaxial connectors, please feel free to consult us about all types of cable processing products! We will assist you in manufacturing and procuring research, product development, and experimental items to create a future society. R&D services are only accepted through the designated form. ■ Service Details - We aim to respond to emails within 3 hours (Monday to Friday, business hours 9:00 AM to 5:00 PM). - We accommodate small lots and short delivery times (available from one unit). - We provide secure issuance of order confirmations, quotations, invoices, delivery notes, and product warranties. - Free exchanges are available for one month after delivery. - Free repairs are available for six months after delivery (exchanges and repairs are limited to one time. Up to 10 companies per year; for the 11th company onwards, it will be negotiable). - No special order forms are required (orders can be placed via email. We will issue an order confirmation). - Payment terms can be specified by the user (within the scope of normal commercial transactions). - Credit card payments are accepted. *Some parts that are not our products may not be eligible for free support. *If free exchanges or repairs are not possible, we will inform you at the time of quotation. *For more details, please download the materials or feel free to contact us.

  • Other electronic parts
  • Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Nulion / Various additives for lubricants / Friction modifiers

Nulion / Various additives for lubricants / Friction modifiers

- As an expert in additives for lubricants, we focus on performance. - We provide essential solutions to share success.

We provide essential solutions that combine our unique know-how in the customized synthesis of amines and polymers with our customers' expertise to meet next-generation regulatory requirements and OEM demands. Throughout our long history of manufacturing surfactants, we have consistently proven our ability to meet customer needs with high-quality technology. Additionally, we continuously improve production processes, ensure quality, and enhance safety to deliver products with more reliable performance and higher purity. 【Functions of the Technical Service Lab】 We have three dedicated integrated labs in North America and Europe that develop new and custom products for our customers. These labs are equipped to fully simulate production and have the capability to react amines with various surfactants. We also have pilot production facilities that can prepare small quantities for field trials.

  • Chemicals
  • Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
BP Castrol / Lubricant for Robots / Castrol ALR

BP Castrol / Lubricant for Robots / Castrol ALR

Maximize the operating time of industrial robots! High-efficiency automation through excellent lubrication!

"Castrol ALR" is a grease and gear oil developed through years of research. It reduces downtime for industrial robots, improves quality and production, and optimizes costs to enhance your manufacturing processes. This product is used for various robots and their applications. Please feel free to contact us when you need assistance. 【Features】 ■ Reduced downtime ■ Lower production costs ■ Improved quality ■ Increased productivity *For more details, please refer to the PDF document or feel free to contact us.

  • image_03.png
  • image_04.png
  • Lubricants
  • Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
BP Castrol / OEM Approval List / Gear Oil

BP Castrol / OEM Approval List / Gear Oil

OEM approval list for gear oil! We introduce product names and OEM company names.

This document is an OEM approval list (gear oil) from major manufacturers both domestically and internationally. It includes OEM companies for products such as "Alphasyn PG 320," "Alphasyn T 460," and "Moraboo Alloy GM 140/460." Additionally, products like "Obuchi Gear 1100/150" and "Obuchi Gear 1100/220" are also introduced. 【Listed Product Names (Partial)】 ■ Alphasyn PG 320 ■ Alphasyn T 460 ■ Moraboo Alloy GM 140/460 ■ Moraboo Alloy GM 170W/680 ■ Moraboo Alloy GM 690/320 *For more details, please download the PDF or feel free to contact us.

  • others
  • Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Release agent "Neopol SX"

Release agent "Neopol SX"

A release agent that makes it difficult for molds to get damaged even when molding rubber that is prone to rust and corrosion!

"Neo-Pole SX" is a water-soluble emulsion-type release agent for rubber that can be used across a wide range from special synthetic rubber to natural rubber. In addition to excellent release properties, it offers various benefits such as preventing joint defects in products and protecting molds from rust and corrosion. [Features] - Mold protection - Prevention of mold contamination - Promotion of rubber flow in molds - Contribution to rubber products *For more details, please download the PDF or feel free to contact us.

  • Coating Agent
  • Chemicals
  • Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Now is the time to reconsider release agents [Basic knowledge of release agents] *Materials available.

Now is the time to reconsider release agents [Basic knowledge of release agents] *Materials available.

Especially fluorine-based release agents are our strength! We offer solutions to challenges with "truly usable" products.

This document is an explanatory material about release agents provided by the Functional Chemicals Team of Nisshin Chemical Co., Ltd. It includes information on the role of release agents, the requirements for release agents, types and applications, selection criteria, our handled products, and the current state of the market. We can propose a variety of types of release agents that correspond to various molding methods and processing materials. [Contents] ■ What is a release agent and its role ■ Requirements for release agents ■ Types and applications of release agents ■ Selection criteria for release agents by type ■ Products handled by Nisshin Chemical ■ Current state of the release agent market - Confusion in the fluorinated release agent market - *For more details, please download the PDF or feel free to contact us.

  • Coating Agent
  • Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Steel formwork: easy construction

Steel formwork: easy construction

Even beginners can easily carry out the installation! It does not require a long training time.

We would like to introduce in detail the strength of "steel formwork," which is its "easy construction." Our "steel formwork" is a very effective product for business owners who are struggling to secure skilled workers, especially as the number of experienced craftsmen has decreased in recent years. To maintain a stable operation on-site, it is necessary to secure employees with technical skills, but training for difficult-to-master techniques can take a long time. Our products can be easily constructed even by beginners, eliminating the need for lengthy training periods. To enable quick construction, it is essential that the assembly is simple and does not put a strain on the body. [Features] ■ Effective for business owners struggling to secure labor ■ Can be easily constructed even by beginners ■ Does not require lengthy training periods *For more details, please refer to the PDF materials or feel free to contact us.

  • others
  • Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Release agent for casting sand "SHIFT MOLD FC-W8"

Release agent for casting sand "SHIFT MOLD FC-W8"

Our patented product! A water-based release agent that does not use any harmful heavy metals or other substances harmful to the human body.

We handle a new type of release agent for casting sand, 'SHIFT MOLD FC-W8', which is used in large high-pressure molding machines like SPO and DISAMATIC, with a special colloidal solution. We use raw materials with polycyclic aromatic hydrocarbons (PCA) below 3%, in accordance with EU standards. Additionally, we do not use any heavy metals or other substances harmful to human health. 【Overview】 ■ Form: Water-based release agent ■ Usage conditions: Used as a concentrate ■ Features and applications: Colloidal solution, low viscosity, patented product *For more details, please download the PDF or feel free to contact us.

  • Chemicals
  • Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
<JIS Certified Product> 'Additive-Free Turbine Oil' VG32

<JIS Certified Product> 'Additive-Free Turbine Oil' VG32

Additive-free turbine oil without any additives! It demonstrates excellent performance for lubricating various bearings, as well as for lubricating fans and compressors! It also has good water separation and anti-emulsification properties!

We would like to introduce our additive-free turbine oil "Turbine Oil 32," which does not contain any oxidation inhibitors. < Applications > ■ Steam and hydraulic turbines ■ Blowers ■ Compressors ■ Bearings of general machinery ■ Light-load gears ■ Hydraulic operating oil < Specifications > ■ Viscosity grade: 32 ■ Kinematic viscosity at 40°C: 32.05 mm²/s ■ Kinematic viscosity at 100°C: 5.526 mm²/s ■ Viscosity index: 109 ■ Flash point: 220°C * For more details, please refer to the PDF document or feel free to contact us.

  • Lubricants
  • Other consumables
  • Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Oil-based "die casting release agent" with improved high-temperature adhesion and anti-seizing properties.

Oil-based "die casting release agent" with improved high-temperature adhesion and anti-seizing properties.

Stable adhesion from low to high temperature range for molds! The standard model of release agent for small applications!

Introducing the oil-based release agent "Eclube 100," which excels in adhesion from low to high temperatures and has excellent anti-seizing properties at high temperatures. < Features > Aiming to develop an oil-based release agent that enables continuous casting without relying on internal cooling of the mold, we have achieved improvements in high-temperature adhesion and anti-seizing properties. ■ Low viscosity type (kinematic viscosity 3.8 mm²/s at 40°C) ■ Applicable mold temperature: 250–400°C (targeting 300–350°C) ■ Minimal stickiness after the dilution solvent has evaporated ■ Difficult to produce discoloration (oil marks) from the release agent * For more details, please refer to the PDF document or feel free to contact us.

  • Lubricants
  • Other consumables
  • Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Chemical reaction type oil-based "concrete release agent" using virgin oil!

Chemical reaction type oil-based "concrete release agent" using virgin oil!

Concrete release agent without the use of recycled oil! The metal soap film formed by the chemical reaction between fresh concrete and alkali is strong and has excellent release performance!

Introducing the "Dispane" series of chemical reaction-type concrete release agents using virgin oil (new oil). <Features> ■ The base oil is virgin oil (new oil). ■ The formation of the metal soap film is strong and has excellent release performance. ■ Since it is difficult for sludge to adhere to the formwork, it reduces the cleaning work of the formwork and improves work efficiency. ■ It suppresses bubbles on the concrete surface, resulting in a smooth and beautiful product finish. ■ It leaves little oil staining on the concrete surface, so it does not compromise the adhesion of finishing materials such as mortar or oil-based paints even during finishing work. * Since the Dispane series is a chemical reaction type, please avoid excessive application. <Lineup> ■ A Series (Low Viscosity): A-05MF, A-6, A-20, A-21AR ■ B Series (Medium Viscosity): B-17, B-20, B-21AR, B-37 ■ GS Series (Medium Viscosity + Defoaming Type): GS-1, GS-3 ■ C Series (High Viscosity): C-12, C-14, C-20 ■ Anti-adhesion Agent: D-1 * For more details, please refer to the PDF document or feel free to contact us.

  • Lubricants
  • Other consumables
  • Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Standard medium viscosity oil-based "concrete release agent" of the chemical reaction type!

Standard medium viscosity oil-based "concrete release agent" of the chemical reaction type!

Standard medium viscosity type! A concrete release agent suitable for medium to large concrete products, concrete block stacking, and general civil engineering and construction.

Introducing the medium viscosity chemical reaction type concrete release agent "Dispane B-20" made with virgin oil (new oil). < Features > ■ The base oil is made from virgin oil (new oil) ■ Forms a strong metal soap film, providing excellent release performance ■ Reduces the adhesion of sludge to molds, improving cleaning efficiency and work productivity ■ Suppresses air bubbles on the concrete surface, resulting in a smooth and beautiful product finish ■ Leaves minimal oil stains on the concrete surface, ensuring that the adhesion of finishing materials like mortar and oil-based paints is not compromised during finishing work * As this is a chemical reaction type, please avoid excessive application. < Specifications > ■ Oil-based straight type (medium viscosity) ■ Usable with steel molds, plywood molds, and wooden panels ■ Suitable for medium to large concrete products and concrete block stacking ■ Ideal for general civil engineering and construction applications * For more details, please refer to the PDF document or feel free to contact us.

  • Lubricants
  • Other consumables
  • Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Environmentally friendly + anti-foaming type oil-based "Concrete Release Agent"

Environmentally friendly + anti-foaming type oil-based "Concrete Release Agent"

A concrete release agent that is friendly to both people and the environment! It combines the ease of use of conventional mineral oil-based concrete release agents with a reduction in environmental impact!

We introduce "Eco Friend," a concrete release agent that incorporates biodegradable properties through a chemical reaction using virgin oil (new oil). < Features > It resolves issues that have been problematic with conventional biodegradable release agents, such as the finish (aesthetics) of the concrete surface, freezing during low-temperature storage, decay due to long-term storage, and component separation. ■ The concrete surface (product surface) finishes smoothly and beautifully with a "defoaming type." ■ Forms a robust metal soap film just like conventional chemical reaction types! Excellent release performance. ■ Minimal adhesion of sludge to molds and plywood, improving work efficiency. ■ Does not freeze at low temperatures, making it suitable for use in winter and cold regions (flow point -37.5°C). ■ Over 95% of the raw materials have approximately 75% biodegradability as tested by the OECD301F biodegradability test, making it suitable for use in outdoor sites where environmental consideration is necessary. * For more details, please refer to the PDF document or feel free to contact us.

  • Lubricants
  • Other consumables
  • Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Chemical reaction type oil-based "concrete release agent" standard high viscosity product!

Chemical reaction type oil-based "concrete release agent" standard high viscosity product!

High viscosity type standard! A concrete release agent suitable for large civil engineering projects such as bridges and tunnels!

We would like to introduce 'Dispane C-20', a high-viscosity chemical reaction type concrete release agent that uses virgin oil (new oil). < Features > ■ The base oil is made from virgin oil (new oil). ■ The formation of a metal soap film is strong and has excellent release performance. ■ It is difficult for sludge to adhere to the formwork, reducing cleaning work and improving work efficiency. ■ It suppresses bubbles on the concrete surface, resulting in a smooth and beautiful product finish. ■ It leaves little oil staining on the concrete surface, ensuring that the adhesion of finishing materials such as mortar and oil-based paints is not compromised during finishing work. * Since it is a chemical reaction type, please avoid excessive application. < Specifications > ■ Oil-based straight type (high viscosity) ■ Suitable for large civil engineering works such as bridges and tunnels. ■ Ideal for prestressed concrete. * For more details, please refer to the PDF document or feel free to contact us.

  • Lubricants
  • Other consumables
  • Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fluorine-based release agent

Fluorine-based release agent

Leave it to us for fluorine rubber, silicone rubber release, etc.

Role of Fluorine-based Mold Release Agents - Prevents adhesion between the mold and molded product during resin/rubber molding. - High release properties and their sustainability contribute to improved efficiency in the production process. Features A diverse range of products tailored to customer requests (water-based/solvent-based, silicone blended/non-blended) and customization options. High release properties and repeated durability. Contributes to improved dimensional accuracy and reduced defect rates. High wettability to molds and low contamination properties.

  • Rubber
  • Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Environmentally friendly fluorine-based high-performance release agent 'Fluomate PM-1010E'

Environmentally friendly fluorine-based high-performance release agent 'Fluomate PM-1010E'

Environmentally friendly fluorine-based release agents compliant with PFOA regulations!

The "FluoroMatic PM-1010E" is a high-performance release agent that maximizes the characteristics of fluorine, including extremely low surface tension, non-stick properties, and water and oil repellency. By using fluorinated compounds with extremely low surface tension as the main component of the release agent, it exhibits excellent coating properties. Additionally, it uses a non-flammable fluorinated solvent, which means it is not subject to regulations such as the Fire Service Act, Poisonous and Deleterious Substances Control Law, or Labor Safety and Health Act. 【Features】 ■ High release effect ■ Not subject to regulations ■ Outstanding coating properties, compatible with complex mold shapes ■ Reduction of post-processing steps ■ Reduction of mold cleaning work *For more details, please download the PDF or contact us.

  • others
  • Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Easy installation, high performance. Quality made possible by packaging.

Easy installation, high performance. Quality made possible by packaging.

Easy installation, high performance. Building reliable quality with packaging.

A system composed of complex and multiple items is modularized with advanced design know-how cultivated in water heater development. Just connect the piping, no hassle. It achieves reduced construction work and space-saving!

  • Other conveying machines
  • Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Release agent for free coat

Release agent for free coat

Release agent for free coat

For over 40 years, Freekote release agents have been repeatedly researched and developed, and are used by customers in various industries for their performance, quality, and value. We offer a range of products suitable for various types of composites, plastics, and rubber molding. Please contact us for more details.

  • others
  • Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Release Agent

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.