Release Agent Product List and Ranking from 78 Manufacturers, Suppliers and Companies

A strong ally in the plastic molding field: "LunaFlow"

A high-durability release agent that suppresses molding defects and can be reused multiple times.

Are you struggling with poor release properties or material adhesion to molds? "Luna Flow" is a non-fluorinated release agent that balances workability and environmental performance. Its effectiveness lasts even with repeated use, reducing the risk of molding defects. ＼For those concerned about release, workability, and environmental measures／ Easy to release even with high viscosity! Reusable! Environmentally friendly! "Luna Flow" will solve the next generation of on-site challenges. If you want to achieve labor reduction and streamline your operations, please consider this product. You can download the materials from our website via the link below or feel free to contact us.

Company：三井物産プラスチック
Price：Other

Coating Agent
Plastic Mould
Resin mold
Release Agent

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

PFAS-free high-durability release agent "Lunaflow"

Water-based release agent 'Lunaflow' free of PFAS, created from Kao's unique technology.

Kao's "Luna Flow" achieves high durability while being environmentally friendly and free of PFAS (per- and polyfluoroalkyl substances). It allows for smooth release from molds even with high-viscosity liquids, which was difficult with conventional silicone and oil-based products. ＼Do you have these challenges in mold forming?／ "Material is hard to remove," "Release agent runs out quickly," "Concern about environmental impact"… → Kao's "Luna Flow" series is here to address those concerns. For those facing issues with reducing defective products and improving work efficiency in the molding process. You can download materials from our website via the link below or feel free to contact us.

Company：三井物産プラスチック
Price：Other

Coating Agent
Other molds
Press Dies
Release Agent

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【Precision Molding Case】Successfully achieved continuous molding of shapes that are difficult with conventional release agents.

For cases where conventional release agents do not work well in molding precise surface shapes, please try Fluorosurf. There are numerous achievements in continuous molding.

"Fluoro Surf FG-5093" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorine-based solvent. By applying it, the adhesion of the surface molding resin is reduced, and a layer of fluorine compounds at the nanometer level exhibits excellent release properties even for complex and precise shapes. It demonstrates its effectiveness in cases where conventional release agents do not work well. It has excellent durability, with a proven track record of continuous release over thousands of shots, and reapplication with a brush or spray can restore its performance. Additionally, since the release agent does not adhere to the workpiece, cleaning after molding is unnecessary. Other examples are also included! *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Release Agent Example] Fluorine treatment on mold surface in-house (easy application + room temperature drying)

It is easy to perform release agent treatment that surpasses in-house baked fluororesin processing. Significant reduction in processing costs and delivery times!

"FloroSurf FG-5093" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. By applying it to the mold with a brush or spray and allowing it to dry at room temperature for about 10 minutes, the adhesion of the molding resin to the surface is reduced, demonstrating excellent release properties. It is particularly effective in situations where conventional release agents do not work well. The film is at the nanometer level, allowing for accurate reproduction even on complex and precise surface shapes. It has excellent durability, with a proven track record of continuous release for thousands of shots, and reapplication with a brush or spray can restore its performance. Since the release agent components do not adhere to the molded products, cleaning is unnecessary. 【Features】 ■ Strongly adheres in reaction to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with a brush or spray gun, eliminating the need for outsourcing processing ■ No need to remove the film during mold reworking ■ No transfer of release agent components, eliminating the need for cleaning of molded products ■ Low odor and non-flammable, maintaining a good working environment and easy management *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluorine-based release agent that can be applied on-site: Fluorosurf FG-5093

Please try this when regular release agents do not work well. It offers overwhelming continuous release properties. Easy to apply with a brush or spray. Dries at room temperature in 5 minutes after application.

The "Fluoro Surf FG-5093" is a mold release agent made by dissolving a special fluoropolymer in a non-flammable fluorinated solvent. Just one application provides a non-stick surface to the mold. It reduces the adhesion of the molded resin to the mold, demonstrating excellent continuous release properties even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It has excellent durability, with proven continuous release performance over thousands of shots, and reapplication using a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to the mold material, allowing for continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with a brush or spray gun, and dries at room temperature in 10 minutes, eliminating the need for external processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products ■ Low odor and non-flammable, maintaining a good working environment Applying it to the extrusion molding nozzle can also reduce surface defects. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Fluorine Coating Agent Example] Easy to apply and improves mold release properties.

Dry fluorine-based mold release agent. Overwhelming continuous release performance. Please try it when conventional release agents do not work well. No cleaning of molded products required. Samples available.

The "Fluoro Surf FG-5093" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorine-based solvent. Additionally, it does not contain any PFAS regulated substances. With just one application, the adhesion of the surface molding resin is reduced, demonstrating excellent continuous release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents fail to work. It boasts outstanding durability, with a proven track record of continuous release over thousands of shots, and reapplication with a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with a brush or spray gun, eliminating the need for outsourcing processing ■ No need to remove the film during mold reworking ■ No transfer of release agent components, eliminating the need for cleaning molded products ■ Low odor and non-flammable, maintaining a good working environment *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Other molds
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Nanoimprint Release Agent Fluorosurf NL Series

We have a proven track record in improving the throughput of nanoimprinting! We can accommodate both quartz molds and electroformed molds.

Release agent for nanoimprint molds, Fluorosurf NL series By applying it to molds for nanoimprinting, a fluorinated compound (perfluoropolyether) is chemically bonded to the mold surface with a layer thickness of about 10 nm, achieving strong adhesion. This enables continuous release, significantly improving the productivity (throughput) of nanoimprint molding. Application can be easily done using methods such as spraying, and it dries at room temperature in 5-10 minutes. It is non-flammable and low-odor, making it safe. Reapplication is also easy. We offer two types: NL-1 for optical nanoimprinting NL-2 for thermal nanoimprinting *Free sample liquid available! (Please cover only the shipping cost = shipped cash on delivery) Feel free to request it.

Company：フロロテクノロジー
Price：Other

Other polymer materials
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Continuous release-type dry release agent for fine molding "Nanoimprint"

High release properties, compatible with nano-level surface shapes and nano-imprinting "FloroSurf" - Easy application with brushes or sprays.

Introducing the high-performance fluorine-based mold release agent "FloroSurf," which surpasses baked-on fluoropolymer coatings and silicone release agents. When conventional release agents fail to release ⇒ We solve the problem with outstanding release performance. When you want to improve continuous release properties ⇒ Continuous release properties will be enhanced. "FloroSurf" features nano-level release components that bond tightly to the mold surface ⇒ It provides strong release and lubricating properties to the mold surface. It demonstrates exceptional continuous release properties in the molding of precision complex shapes, highly adhesive resins, elastomers, and fragile thin-walled products. ~ We are offering free samples exclusively for businesses! ~ Please select "Request Sample" via the [Contact Button] below.

Company：フロロテクノロジー
Price：Other

Other molds
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release agent Fluorosurf for precision surfaces, for fine molding, nanoimprint.

High release properties with nanometer-level surface shapes and compatibility with nanoimprinting "FloroSurf" - easy application with brushes or sprays.

Introducing the high-performance fluorine-based mold release agent "FloroSurf," which surpasses baked-on fluoropolymer processing and silicone release agents. When conventional release agents fail to provide release or you want to improve continuous release properties, this is where it shines. "FloroSurf" bonds tightly to the mold surface with a nanometer-level ultra-thin film, imparting strong non-stick and lubricating properties to the mold surface. It demonstrates exceptional continuous release properties in the molding of precision complex shapes, highly adhesive resins and elastomers, and fragile thin materials. ～ We are offering free samples exclusively for corporate clients! ～ Please indicate "Sample Request" when you contact us using the button below.

Company：フロロテクノロジー
Price：Other

Other molds
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluorine surface treatment of molds at our own site - Room temperature release agent - FluoroSurf

Fluorine-based dry release agent. Please try it when conventional release agents do not work well. Overwhelming continuous release properties. Easy to apply and dries at room temperature in 5 minutes. No need to clean the molded products.

The "Fluoro Surf FG-5093, 5095, 5097 Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. Just one application grants a non-stick property to the mold surface. It reduces the adhesion of molding resins to the mold, demonstrating excellent continuous release even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It boasts excellent durability and a proven track record of continuous release, and its performance can be restored by reapplying with a brush or spray. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nano imprinting ■ Easily applied with brushes or spray guns, with a drying time of 10 minutes at room temperature. No need for outsourcing processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products (FG-5093, 5095) ■ Low odor and non-flammable, maintaining a good working environment Applying it to the extrusion molding nozzle can also reduce haze. Free samples are available for trial (limited to corporations)! Feel free to request.

Company：フロロテクノロジー
Price：Other

Coating Agent
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Room temperature construction dry release agent Fluorine surface processing of molds at our own site

Please try this when conventional release agents do not work well. It offers overwhelming continuous release properties. Easy to apply, it dries at room temperature in 5 minutes on the molding site. No need to clean the molded products.

The "Fluoro Surf FG-5093, 5095, 5097 Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. Just one application provides a non-stick surface on the mold. It reduces the adhesion of molded resin to the mold, demonstrating excellent continuous release properties even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It has excellent durability and a proven track record of continuous release, and reapplication with a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to the mold material, allowing for continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nanoimprinting ■ Easily applied with a brush or spray gun, drying at room temperature in 10 minutes. No need for outsourcing processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products (FG-5093, 5095) ■ Low odor and non-flammable, maintaining a good environment on-site By applying it to the extrusion molding nozzle, it can also reduce haze. Free samples are available for trial (limited to businesses)! Please feel free to request.

Company：フロロテクノロジー
Price：Other

Coating Agent
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Dry high-performance release agent Fluorosurf silicone-free

A dry release film is formed on the surface of the mold. Release properties are significantly improved, and cleaning of the molded products is unnecessary. It is non-flammable and safe, and can be easily applied. Contains no silicone-based compounds.

"FloroSurf FG-5093" is a fluorine-based dry mold release agent. It is free of silicone, ensuring that it does not contaminate molded products, eliminating the need for cleaning. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents fail to work properly. It boasts exceptional durability, with proven performance for continuous release over thousands of shots, and reapplication using a brush or spray can restore its effectiveness. **Features** - Strongly adheres to mold materials, enabling continuous release. - The film thickness is only a few nanometers, suitable for nano and sub-micron level molds. - Easily applied with brushes or spray guns, eliminating the need for outsourcing processing. - No need to remove the film during mold modifications. - No transfer of release agent components, eliminating the need for cleaning molded products. - Low odor and non-flammable, maintaining a good working environment. *If you would like a free sample, please include "Sample Request" in your inquiry.*

Company：フロロテクノロジー
Price：Other

Coating Agent
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Continuous release is possible. Fluorine surface processing of molds at our own site. Non-transfer.

Please try this when conventional release agents do not work well. It offers overwhelming continuous release properties. It is easy to apply, can be applied on the molding site, and only requires 5 minutes of air drying at room temperature. No cleaning of the molded products is necessary.

The "Fluoro Surf FG-5093, 5095, 5097 Series" is a mold release agent made by dissolving a special fluoropolymer in a non-flammable fluorinated solvent. Just one application provides a non-stick surface on the mold. It reduces the adhesion of molding resins to the mold, demonstrating excellent continuous release properties even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It has excellent durability and a proven track record of continuous release, and its performance can be restored by reapplying with a brush or spray. 【Features】 ■ Strongly adheres to the mold material, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nano-imprinting ■ Can be easily applied with brushes or spray guns, drying at room temperature in 10 minutes. No need for outsourcing processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products (FG-5093, 5095) ■ Low odor and non-flammable, maintaining a good working environment By applying it to the extrusion molding nozzle, it can also reduce haze. Free samples are available for trial (limited to corporations)! Please feel free to request.

Company：フロロテクノロジー
Price：Other

Coating Agent
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-stick coating: Transparent non-stick coating can be easily applied at room temperature.

Power of fluorine strongly prevents adhesion of adhesives and dirt! The transparent thin film surface treatment can be easily applied at room temperature. Recoating on-site is also easy.

The simplified fluorine coating exhibits strong non-stick properties. By applying the coating, it becomes difficult for adhesives to adhere, and it also reduces dirt such as fingerprints, grease, and water stains. Furthermore, it can be easily removed. This can save you the hassle of daily maintenance. 【This is effective in the following cases】 ■ Preventing adhesive from sticking to metal knives and scissors ■ Ensuring that tape does not stick to the blade when cutting adhesive tape ■ Making it easier to remove scale from faucet fixtures ■ Wanting to easily remove fingerprints from touch panel surfaces ■ Improving the slip properties of touch panels to enhance the user experience ■ Aiming to reduce cleaning time for fingerprints and dirt ■ Needing a durable anti-fouling coating that does not change the appearance ■ Scale (white stains) adhering to metal surfaces and becoming difficult to remove ■ Fingerprints being noticeable on stainless steel control panels and inner doors ■ Improving the transmittance of films used on displays and preventing fingerprints ■ Enhancing slip properties during operation *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-based release agent, excellent release properties, continuous release possible with a single application, free of regulated substances.

The Fluoro Surf FG-5095W is an environmentally friendly water-based release agent with excellent release properties. Please try it when conventional release agents do not work.

FloroSurf FG-5095W is a water-based fluorine release agent. It is ideal for VOC countermeasures and does not use any regulated substances such as PFOA, PFOS, or PFHxS. When applied to elastomer molds for resin molding using a brush or spray and allowed to dry at room temperature for about 10 minutes, it reduces the adhesion of the molding resin on the surface, demonstrating excellent release properties. The release component reacts and adheres to the mold surface, providing sustained release effects and enabling continuous release. It is particularly effective in situations where conventional release agents struggle to perform. The coating is at the nanometer level, allowing for accurate reproduction even on complex and precise surface shapes, resulting in less mold contamination and significantly reducing cleaning efforts.

Company：フロロテクノロジー
Price：10,000 yen-100,000 yen

Other polymer materials
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release agent case: No transfer to the workpiece in dry conditions! Continuous release is now possible!

It is easy to perform release agent treatment that exceeds in-house baked fluororesin processing. Significant reduction in processing costs and lead times!

The "Fluoro Surf FG-509X Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. When applied to the mold with a brush or spray and dried at room temperature for about 10 minutes, it reduces the adhesion of the surface molding resin, demonstrating excellent release properties. It is particularly effective in situations where conventional release agents fail to work properly. The film is at the nanometer level, allowing for precise reproduction even on complex and intricate surface shapes. It has excellent durability, with a proven track record of continuous release over thousands of shots, and reapplication with a brush or spray can restore its performance. Since the release agent components do not adhere to the molded products, cleaning is unnecessary. Furthermore, regulated substances such as PFOS, PFOA, and PFHxS are not used. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Easily applied with brushes or spray guns, eliminating the need for outsourcing processing ■ No need to remove the film during mold reworking ■ No transfer of release agent components, making cleaning of molded products unnecessary ■ Low odor and non-flammable, maintaining a good working environment and easy management.

Company：フロロテクノロジー
Price：Other

Coating Agent
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release agent for preventing cracks in CFRP thin sheet molding, no cleaning of molded products required.

Demonstrates its true capabilities in thin material molding with overwhelming release properties. Easy to apply, can be applied on-site during molding, and dries at room temperature in just 5 minutes. Free of PFOA/PFOS. Non-flammable and safe.

The "FloroSurf FG-509X Series" is a release agent that forms a dry fluorine film on the surface of molds. By simply applying it with a spray gun in our manufacturing facility and allowing it to air dry at room temperature, a dry, non-stick surface is imparted to the mold. There is no need to outsource processing to specialized contractors. The film is extremely thin, allowing for excellent continuous release properties even for complex and precise shapes. Additionally, the release agent components do not transfer, so cleaning of the molded products is unnecessary. Please try it in cases where conventional release agents do not work well during CFRP molding. Furthermore, our products do not contain regulated substances such as PFOS or PFOA. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ Film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nano imprinting ■ Easily applied with a brush or spray gun, with air drying in just 10 minutes at room temperature. No need for external processing ■ No removal of the film is required during reapplication ■ Low odor and non-flammable. Not classified as an organic solvent, significantly reducing legal management items Applying it to the nozzle of extrusion molds can also reduce haze. *If you would like a free sample, please contact us.

Company：フロロテクノロジー
Price：Other

Coating Agent
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release agent for transparent resin: "No cloudiness on the product!" "Continuous release is possible."

A dry release film is formed on the surface of the mold. Continuous release is possible, and there is no cloudiness on the resin. Since it is dry, the release agent components do not transfer, so cleaning of the workpiece is unnecessary.

The "Fluoro Surf FG-5093" is a fluorine-based dry mold release agent. It is free of silicone, ensuring that molded products remain clean and do not require washing. It is the only release agent that does not cause cloudiness when molding transparent resins. With a thin film at the nanometer level, it demonstrates excellent release properties even for complex and precise shapes, maintaining accurate surface precision. It has high release properties and excellent durability, with a proven track record of continuous release over thousands of shots. It is particularly effective in situations where conventional release agents fail. 【Features】 ■ The release agent components react with the mold material to adhere strongly, allowing for continuous release. ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds. ■ It can be easily applied with brushes or spray guns, eliminating the need for outsourcing processing. ■ No removal of the film is required during mold reworking. ■ There is no transfer of release agent components, and cleaning of molded products is unnecessary. ■ When performance degrades, reapplication is as simple as top-coating! No need to remove the old film. ■ It has low odor and is non-flammable, helping to maintain a good working environment. ■ It does not use PFAS regulated substances (such as PFOS, PFOA, PFHxS, etc.).

Company：フロロテクノロジー
Price：Other

Coating Agent
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Please try the following for moldability: "Continuous molding possible" "Dry non-transfer"

Overwhelming continuous release properties. Easy to apply with a brush or spray. Dries at room temperature in just 5 minutes after application. The film thickness is only a few nanometers, and cleaning of the molded product is unnecessary. Sample available.

"FluoroSurf" and "Mold-Free" provide excellent non-stick release properties to metal surfaces when applied. PFAS regulated substances (such as PFOS, PFOA) are not used. Please try it when conventional release agents do not work. 【Features】 ■ The fluoropolymer film reacts with the mold material to adhere strongly, enabling continuous release even when conventional release agents fail. ■ With a film thickness of just a few nanometers, it can faithfully reproduce surface shapes at the nano and sub-micron level. ■ FluoroSurf can be easily applied with brushes or spray guns, while Mold-Free can be applied with an aerosol. Application is completed in just 10 minutes at room temperature, eliminating the need for external processing like baked fluoropolymer. ■ There is no accumulation of dirt on the mold, and no transfer of components to the workpiece, eliminating the need for cleaning processes. (Excluding Mold-Free MF-02S) ■ It is also effective in improving resin flow. ■ It is non-flammable, thus not classified as hazardous under fire laws. (Excluding Mold-Free) It has low odor. A water-based model is also available for VOC countermeasures. ■ There is no need to remove the film during mold reworking. ■ It is effective in reducing surface defects in extrusion molding and addressing melt fracture issues.

Company：フロロテクノロジー
Price：Other

Other molds
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-performance release agent for recycled plastics, excellent release properties.

Overwhelming release properties even with recycled plastic. Easy to apply with a brush or spray. Dries at room temperature in 5 minutes after application. No cleaning of molded products required. Samples available.

"FluoroSurf" and "Mold Free" provide excellent non-stick release properties to metal surfaces when applied. Outstanding release properties even with difficult recycled plastics! Please try it when conventional release agents fail. PFAS-regulated substances are not used. 【Features】 ■ The fluoropolymer film reacts with the mold material and adheres strongly, allowing continuous release even when conventional release agents fail. ■ The film thickness is only a few nanometers, faithfully reproducing surface shapes at the nano and sub-micron level. ■ FluoroSurf can be applied with brushes or spray guns, while Mold Free can be applied directly from an aerosol can. The application is completed in just 10 minutes at room temperature, eliminating the need for external processing like baked fluoropolymer. ■ There is no accumulation of dirt on the mold, nor transfer to the workpiece, eliminating the need for cleaning processes. (Excluding Mold Free MF-02S) ■ There is no transfer of release agent components, so cleaning of molded products is unnecessary. ■ It is non-flammable, thus not classified as a hazardous material under fire safety laws. Additionally, it has low odor. A water-based model is also available for VOC countermeasures. ■ There is no need to remove the film during mold reworking. ■ It is effective in reducing surface defects in extrusion molding.

Company：フロロテクノロジー
Price：Other

Other molds
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-soluble release agent: high performance, continuous release possible, dry non-transfer, non-silicone.

Please try this when conventional release agents do not work well. It offers overwhelming continuous release properties. Application is easy; it can be applied on the molding site and dries at room temperature in just 5 minutes. Contains no regulated substances!

The "Fluoro Surf FG-5095W" is a fluorine treatment agent (release agent) for water-based resin molding molds. (This product does not contain any PFAS regulated substances such as PFOA/PFOS/PFHxS.) * Fluorine release processing can be easily applied on-site using brushes or spray guns. * The release component reacts and bonds to the surface of the mold, providing durability and continuous release properties. * The release agent component is dry and does not transfer to the molded product, eliminating the need for cleaning. * The film thickness is only a few nanometers, making it suitable for nano and sub-micron level molds and nano imprinting, accurately reproducing precise surfaces. * When the release performance decreases, reapplication will restore its effectiveness. * By applying it to the die of extrusion molding, it can also reduce defects like orange peel and shark skin. * It is water-based and does not fall under VOC regulations. It is non-flammable and does not contain organic solvents, making it easy to manage without the need for compliance with fire safety and occupational health regulations. * If you would like a free sample, please indicate "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release agent for transparent resin: No cloudiness during the molding of transparent resin!

Release agent for transparent resin forms a dry release film on the mold surface. No cleaning of molded products is required. Non-flammable and safe + easy to apply. Contains no silicone compounds.

"FloroSurf" and "Mold Free" are fluorine-based dry release agents that do not cause cloudiness in transparent resins. They do not contain silicone, ensuring that molded products remain clean and do not require washing. Additionally, no PFAS regulated substances are used at all. These agents demonstrate their effectiveness in situations where traditional release agents struggle to perform. They are highly durable, with a proven track record of continuous release over thousands of shots, and their performance can be restored by reapplying with a brush or spray. There are two types available: solution type (product name FloroSurf) and aerosol type (product name Mold Free). 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with brushes or spray guns, eliminating the need for outsourcing processing ■ No need to remove the film during mold reworking; reapplication restores release performance ■ No transfer of release agent components, eliminating the need for cleaning molded products ■ Low odor and non-flammable, maintaining a good working environment (excluding aerosol type) *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-performance release agent for epoxy resin, excellent release properties.

Overwhelming continuous release properties in epoxy resin molding. Easy application with a brush or spray. Dries at room temperature in 5 minutes after application. No cleaning of molded items required. Samples available.

"FluoroSurf" and "Mold Free" provide excellent non-stick release performance to metal surfaces when applied. Outstanding release properties even with difficult epoxy resins! Please try it when conventional release agents fail. PFAS regulatory substances are not used. 【Features】 ■ The fluoropolymer film reacts with the mold material and adheres strongly, allowing continuous release even when conventional release agents fail. ■ The film thickness is just a few nanometers, faithfully reproducing surface shapes at the nano and submicron level. ■ Application is completed in just 10 minutes at room temperature. No external processing like baked fluoropolymer is required. ■ There is no accumulation of dirt on the mold, and no transfer of release agent components to the workpiece, eliminating the need for cleaning processes. ■ No cloudiness occurs during transparent resin molding. ■ Non-flammable, thus not classified as hazardous materials under fire safety laws. Additionally, it has low odor. A water-based model is also available for VOC countermeasures. ■ No removal of the film is required during mold reworking. ■ It is effective in reducing defects like "melting" and "sharkskin" in extrusion molding.

Company：フロロテクノロジー
Price：Other

Other molds
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-soluble release agent for automotive resin parts - transparent resin without cloudiness.

Reduce molding defects of resin and rubber parts! Improve productivity with continuous release.

In the automotive industry, mass production of high-quality parts is required. Particularly for parts with complex shapes and designs, issues with mold release can significantly reduce production efficiency. Mold release problems can lead to damage to parts and defects in appearance, potentially resulting in increased costs. Our water-soluble release agent addresses these challenges with its overwhelming continuous release properties. 【Application Scenarios】 - Molding of interior parts such as dashboards, door trims, and console boxes - Molding of parts with complex shapes or high design quality - Compatibility with various resin materials such as urethane, ABS resin, and PP resin 【Benefits of Implementation】 - Improved yield through reduced mold release issues - Decreased frequency of mold maintenance - Cost reduction through increased productivity - Stable supply of high-quality interior parts

Company：フロロテクノロジー
Price：Other

Coating Agent
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-soluble release agent for transparent resin - transparent resin without cloudiness - non-transferable upon drying.

Reduce molding defects of resin, rubber, and transparent parts! Improve productivity with continuous release.

Our water-soluble release agent solves issues such as poor release performance through its overwhelming continuous release capability. Additionally, it contributes to improved productivity by minimizing cloudiness of the workpiece during the molding of transparent resins such as polycarbonate. Furthermore, the thickness of the release agent film is at the nanometer level, allowing for faithful reproduction of the mold's surface precision. Being water-based, it does not generate VOCs and poses no fire hazards, making it easy to manage and environmentally friendly. Moreover, although it is a fluorine-based release agent, it does not contain regulated substances such as PFOA, PFOS, or PFHxS. 【Application Scenarios】 - Molding of transparent components such as lens parts - Molding of interior parts like dashboards, door trims, and console boxes - Molding of complex-shaped parts or parts with high design aesthetics - Compatibility with various resin materials such as urethane, ABS, and PP 【Benefits of Implementation】 - Improved yield due to reduced release failures and workpiece cloudiness - Reduced frequency of mold maintenance - Cost reduction through increased productivity - Stable supply of high-quality interior parts

Company：フロロテクノロジー
Price：Other

Coating Agent
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Spray release agent "Mold Free" high-performance release, free of regulated substances.

Please use this as an alternative to the discontinued fluorine-based release agents! It provides enhanced release properties. Free of regulated substances.

A high-performance fluorine-based release agent with proven results in various fields, "Fluorosurf," has been made into an aerosol. It can be easily applied on-site and exhibits excellent release properties after drying at room temperature. Additionally, it can be used as a substitute for release agents that have been discontinued by other companies. MF-5095 is a high-performance product that surpasses past aerosol release agents. Furthermore, this product does not contain regulated substances (PFOA, PFOS, PFHxS). *If you would like a sample for use, please include "Sample Request" in your inquiry. (This is limited to corporate clients. It cannot be used for applications involving food contact or medical purposes.)

Company：フロロテクノロジー
Price：Other

Coating Agent
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release agent spray "Mold Free" high-performance release agent, free of regulated substances.

Please use this as a substitute for the discontinued fluorinated release agent! It provides enhanced release properties. Free of regulated substances.

The fluorine-based release agent "Fluorosurf," which has a proven track record in various fields, has been made into an aerosol. It can be easily applied on-site and exhibits excellent release properties after air-drying at room temperature. Additionally, it can be used as a substitute for release agents that have been discontinued from other manufacturers' fluorine-based products. MF-5095 is a high-performance product that surpasses previous aerosol release agents. Furthermore, this product does not contain regulated substances (PFOA, PFOS, PFHxS). *If you would like a sample for use, please include "Sample Request" in your inquiry. (This offer is limited to corporate clients. It cannot be used for applications involving food contact or medical use.)

Company：フロロテクノロジー
Price：Other

Coating Agent
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-soluble release agent / Casting series

A long-established Italian manufacturer of release agents has introduced its highly popular release agent in the EU to Japan for the first time!

- A wide usable temperature range of 150 to 380°C (during mold opening). - Excellent adhesion even in high-temperature ranges. - Full synthetic type with minimal residue, making it less likely to dirty the mold.

Company：ヴァーデン販売
Price：Other

Other consumables
Release Agent

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Crane-210 Mold Stopper 200g Cooling Water Infiltration Preventive Agent

Mold repair material, coolant water intrusion prevention agent, Shift Chemical. It has excellent heat resistance, water resistance, sealing properties, and low adhesion, meeting all the required performance for mold fitting sealing.

The mold maintains performance for long periods even at high temperatures above 450°. It has long-lasting water resistance and heat water resistance. The formed film does not adhere, making it easy to remove during work. This product undergoes a thermochemical reaction to form a strong cured body. The cured body does not soften due to heat. It has a very high solid content and forms a dense layer, providing sufficient waterproof curing. This product is in paste form, making application easy, and it can be applied thinly.

Company：ツールシステムツールエクスプレス
Price：10,000 yen-100,000 yen

Plastic Mould
Press Dies
Mold Design
Release Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

44110 High Temp 1800 Optimal for ULTEM resin engineering plastics

44110 High Temp 1800 Ideal for engineering plastics such as ULTEM 1 piece 12 pieces 425ml Slide

44110 High Temp 1800 Special Release Agent 425ml Slide 1 bottle 12 bottles This is a release agent that can be painted and does not contain silicone. It is ideal for engineering plastics such as ULTEM resin and can also be used in glass production. 44110 High Temp 1800 High Temp 1800 is optimal for high-temperature resin molding. The special lubricating film containing boron nitride contributes to increased productivity. It can also be used for low-melting-point metal die casting such as lead, zinc, and aluminum. It is also suitable for glass molding. - Chlorine-free - Paintable and does not contain silicone - Contains boron nitride - Usable in glass production - Ideal for engineering plastics such as ULTEM resin - Maximum usage temperature: 982°C

Company：ツールシステムツールエクスプレス
Price：Other

Lubricants
Other consumables
Release Agent

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release Agent Product List and Ranking from 78 Manufacturers, Suppliers and Companies | IPROS GMS

Release Agent Manufacturer, Suppliers and Company Rankings

Release Agent Product ranking