We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Resin.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Resin(0.2) - List of Manufacturers, Suppliers, Companies and Products

Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.

Resin Product List

121～135 item / All 149 items

Displayed results
Low viscosity, thin-walled casting high transparency epoxy resin GM-9002

Low viscosity, thin-walled casting high transparency epoxy resin GM-9002

You can create clear parts and a skeleton model.

- Epoxy resin suitable for thin-walled casting (thickness of 5mm or less) - Slow yellowing due to aging - Low viscosity, making it difficult for bubbles to remain even at normal pressure - Good balance of rigidity, making it less likely to break during demolding - At room temperature (23°C), flowability decreases in about 10 minutes and cures in one day - Curing speed can be adjusted with heat treatment (not exceeding 50°C) * Curing with a thickness of more than 5mm can generate high temperatures (over 100°C) due to exothermic reactions, which is dangerous.

  • plastic

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Araldite Urethane System 66B (Low Hardness)

Araldite Urethane System 66B (Low Hardness)

Huntsman manufactured polyurethane resin for potting. It has a Shore A hardness of 30, which is very low hardness. In stock at our company. TDS and SDS are available for distribution.

This is a potting and casting polyurethane resin from the global chemical manufacturer HUNTSMAN. 66B is characterized by its elasticity and low hardness. For details, please check the property table below or contact us. Main agent: Polyol 3618B Hardener: Isocyanate 2023

  • Other polymer materials
  • Other electronic parts

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Araldite Urethane System 22B (Elasticity/Low Hardness)

Araldite Urethane System 22B (Elasticity/Low Hardness)

Huntsman manufactured polyurethane resin for potting. Shore A hardness 40, with 350% elongation and low hardness elasticity. In stock at our company. TDS and SDS are available for distribution.

This is a potting and casting polyurethane resin from the global chemical manufacturer HUNTSMAN. 22B is characterized by its elasticity and low hardness. For details, please check the property table below or contact us. Main agent: Polyol 3018B Hardener: Isocyanate 2023

  • Other polymer materials
  • Other electronic parts

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Araldite Urethane System 22BF (22B derivative)

Araldite Urethane System 22BF (22B derivative)

Huntsman manufactured potting polyurethane resin. Based on low hardness and elasticity of 22B, it features low viscosity and reduced curing time. In stock at our company. TDS and SDS are available for distribution.

This is a potting and casting polyurethane resin from the global chemical manufacturer HUNTSMAN. 22BF features a low viscosity and shortened curing time based on the elasticity and low hardness of 22B. For more details, please check the property table below or contact us. Main agent: Polyol 3018BF Curing agent: Isocyanate 2023

  • Other polymer materials
  • Other electronic parts

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Data] Modification of YS Resin PP/SEBS (=80/20) Alloy

[Data] Modification of YS Resin PP/SEBS (=80/20) Alloy

Application to polymer modifiers! Improved moldability (fluidity) and impact resistance.

The document discusses the application of "YS Resin (terpene-based resin)" in the modification of PP/SEBS (80/20) alloy. It introduces flowability (600 kg/cm²), tensile strength, flexural strength, flexural modulus, Izod impact strength, and heat deflection temperature with diagrams. There is also a table evaluating the mechanical properties of PP/SEBS-based alloys, making it a user-friendly reference. We encourage you to read it. 【Contents (partial)】 ■ Evaluation methods ■ Evaluation samples ■ Melt mixing conditions ■ Preparation of test specimens ■ Flowability tests (spiral flow length moldability evaluation) ■ Mechanical property tests ■ Results *For more details, please download the PDF or feel free to contact us.

  • Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flexible and high thermal conductivity liquid epoxy resin series (room temperature curing and heat curing)

Flexible and high thermal conductivity liquid epoxy resin series (room temperature curing and heat curing)

Flexible high thermal conductivity (high thermal conductivity) resin with thermal conductivity ranging from 0.9 to 2.8 W/m·K! We have a lineup of four products available for room temperature curing and heat curing!

In recent years, with the miniaturization and high integration of components, there has been a demand for thermally conductive epoxy resins as insulating materials, and stress relief has also become necessary. In response to this need, we have developed a flexible thermal conductive resin series. This product series features low viscosity for ease of use and has thermal conductivity ranging from 0.9 to 2.8 W/m·K. In addition to the conventional heat-curing type, we also offer an environmentally friendly room-temperature curing type. Both types are two-component systems. We also have products that are non-flexible but offer higher thermal conductivity. For more details, please download the PDF "Introduction to TERADITE [Updated on 2024/8/1]" from the link below or check the product page. https://www.ipros.jp/product/detail/2001118658 *For product details, please download the PDF from the link below or feel free to contact us. *On 2024/8/1, the PDF for TE-7172 was replaced with the improved model number TE-7172K. *On 2024/9/24, the PDF for TE-7170 was replaced with the improved model number TE-7170K.

  • IPROS87489559172950448823.jpeg
  • IPROS24215939675983459919.jpeg
  • IPROS74615738417257252247.png
  • 柔軟２.jpg
  • 柔軟３.jpg
  • 柔軟４.jpg
  • Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[English Market Research Report] Global Market for Epoxy Resins

[English Market Research Report] Global Market for Epoxy Resins

"Free samples" are currently being offered! Please check the application method from the [PDF download] button, or apply directly through the related links.

The epoxy resin market size is expected to grow at a CAGR of 6.3% during the forecast period, reaching 15.9 billion USD by 2030. In 2022, the market reached 2,804.31 kilotons, experiencing a growth of 5.5% from 2019 to 2022. Furthermore, epoxy resin-based composites are also used in the manufacturing of wind turbine nacelles and rotor hubs. The nacelle houses critical components such as gearboxes, generators, and control systems, while the rotor hub connects the blades to the main shaft. Therefore, the increasing adoption of renewable energy is a key factor driving market growth.

  • Other services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Foam polyurethane insulation material

Foam polyurethane insulation material

Manufacturing of insulation materials using batch production methods.

It is an insulation material made of polyurethane produced using a batch production method with a flat panel molding machine.

  • kojyo_uretan02.jpg
  • Extrusion Machine
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Design and Practice of Transparent Flame Retardant Resins, Combustibility Testing and Evaluation Criteria, Trends in UL Standards

Design and Practice of Transparent Flame Retardant Resins, Combustibility Testing and Evaluation Criteria, Trends in UL Standards

Flame retardant technology for the most difficult transparent resins (such as acrylic and polycarbonate).

Flame-Retardant Plastics with Transparency: Tests, Underwriters Laboratories, etc. ★ An explanation of the guidelines for flame-retardant technology of transparent resins (such as acrylic and polycarbonate), which is the most challenging among polymer flame retardancy, from basics to practical applications! ☆ Examples of combustion tests for transparent resin materials (combustion tests required for LED lighting) such as UL94, UL746C, UL60950-1, etc. ★ Explanation of reliable data based on ISO/IEC17025! 【Venue】 Kawasaki City Industrial Promotion Hall, 10th Floor, Conference Room 1【Kanagawa, Kawasaki】 Date and Time July 31, 2013 (Wednesday) 13:00-16:30

  • Company：AndTech
  • Price：10,000 yen-100,000 yen
  • Technical Seminar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Laminating a PTFE sheet to one side of glass fiber composite material.

Laminating a PTFE sheet to one side of glass fiber composite material.

Introducing Japan Polymer's products for use in piping fittings for power plants and waste treatment facilities!

We would like to introduce our "Fluororesin/Laminate" products. This product is made by laminating a PTFE sheet onto one side of a glass fiber composite material. It is pinhole-free and can be used in a temperature range of -100 to +260 degrees Celsius. Please feel free to contact us if you have any inquiries. [Features] ■ Pinhole-free *For more details, please refer to the PDF document or feel free to contact us.

  • Glass

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Acrylic resin <overseas production>

Acrylic resin <overseas production>

Contributing to cost reduction, quality improvement, and enhancement of design for a variety of companies!

Nichibei Parts Co., Ltd. has launched a new service providing acrylic resin produced overseas for domestic companies facing rising costs. The strength of our overseas production is not only its low cost but also its stable quality. This is because we handle all processes from printing to assembly in-house, allowing us to quickly identify the cause of any defects that may occur. 【Technical Information】 ■ Minimum product dimension: φ3mm ■ Maximum product dimension: 1,200mm × 2,500mm ■ Processing accuracy: ±0.02mm ■ Printing alignment accuracy: ±0.05mm ■ Flange thickness accuracy: ±0.01mm *For more details, please refer to the related links or feel free to contact us.

  • 14a.PNG
  • 14b.PNG
  • 14c.PNG
  • 14d.PNG
  • Resin processing machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Construction Industry Case Study] Production of Insulation Material for Water Pipes Used in Bridges

[Construction Industry Case Study] Production of Insulation Material for Water Pipes Used in Bridges

Prevent freezing of water pipes in bridges with polyurethane foam insulation!

Our company specializes in the production of insulation materials using polyurethane foam. In this case, we will introduce an example of insulation material that contributes to preventing the freezing of water pipes for bridges. 【Overview】 Processing method: The raw material for polyurethane foam is injected into the outer layer of a double pipe to produce polyurethane insulation material. Size: Diameter 500 mm, Length 10 m Lot size: We can accommodate orders starting from one piece. Material: Polyurethane foam Delivery time: - <Case Information> Water pipes for bridges are at risk of freezing and breaking due to the cold in winter. By producing insulation materials with high insulation effectiveness using polyurethane foam, we contribute to preventing freezing. <Customer Feedback> "We are making a significant contribution to preventing the freezing of water pipes for bridges."

  • Contract manufacturing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Resin

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.