We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Resin.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Resin(0.2) - List of Manufacturers, Suppliers, Companies and Products

Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.

Resin Product List

76～90 item / All 149 items

Displayed results
Launch of "Phenol: Thermosetting" Resin for Sand Mold 3D Printers

Launch of "Phenol: Thermosetting" Resin for Sand Mold 3D Printers

We will support the enhancement of added value through new material development!

We have newly developed and started selling a new binder material specifically for sand mold 3D printers that can directly create sand cores from CAD data, responding to customer needs: "Phenol: heat-resistant reinforced, gas-compatible specifications." With the addition of the phenol binder (adhesive) to our lineup, it has become possible to create sand molds with high heat resistance and hardness, making them suitable for more complex and thin-walled castings. The phenolic resin we are launching is one of the thermosetting resins. While the previous furan binder was self-hardening, the phenol binder is thermosetting. ◆ Binder lineup - Furan - Phenol We will continue to develop and propose original materials to support the enhancement of the added value of the products our customers are developing.

  • Transmission

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Thin fluoropolymer (PTFE) high-strength adhesive tape "No.923UT"

Thin fluoropolymer (PTFE) high-strength adhesive tape "No.923UT"

Ultra-thin adhesive tape with a total thickness of 0.04mm! Ideal for bundling wires in mobile devices (protection, insulation).

"No.923UT" is an adhesive tape coated with a silicone-based adhesive on a thin fluoropolymer (PTFE) film. It has excellent heat resistance, electrical insulation properties, and slip characteristics. Despite being a thin adhesive tape with a total thickness of 0.04mm, it has high tensile strength and low elongation. 【Features】 ■ Thin adhesive tape with a total thickness of 0.04mm ■ High tensile strength with low elongation ■ Excellent properties such as heat resistance, electrical insulation, slip characteristics, water repellency, and release properties on the back *For more details, please refer to the PDF document or feel free to contact us.

  • No.923UTサブ1.PNG
  • No.923UTサブ2.PNG
  • Composite Materials
  • Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Epoxy Resin Zero Mar Series for Sample Grinding [Made in Japan]

Epoxy Resin Zero Mar Series for Sample Grinding [Made in Japan]

【Poisonous and Deleterious Substances Control Law ☆ Not Applicable ☆】 Three Arrows of Epoxy Resin Released by IMT

【ZeroMa-K Plus】 An ultra-low viscosity type with excellent permeability. Due to its superior adhesion, it is suitable not only for general use but also for fine samples such as electronic components. It takes time to cure, but it is a top performer in the ZeroMa series with low-temperature curing and good adhesion. 【ZeroMa-S】 A versatile resin with no peculiarities. A popular choice in the ZeroMa series, it is a low-cost, low-viscosity type. 【ZeroMa-TH】 Cures in a short time of 1.5 to 2 hours! It has high transparency, allowing for sample confirmation from the side. A new star in the ZeroMa series designed for those who want to finish work quickly with short curing times. In addition to these, there are other room-temperature curing resins. Supersonic acrylic resin 【Falcon】 A handy tool in the sample polishing world 【Tsukamerukun】

  • Other laboratory equipment and containers

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Graphene heat dissipation resin (graphene pellets)

Graphene heat dissipation resin (graphene pellets)

The applications for heat-curing resins, three-dimensional heat dissipation materials, and thermal management resins are expanding.

We would like to introduce a thermosetting molding resin material that can "dissipate heat" while being a resin by adding graphite. We have four types of graphene phenolic resin materials available. Regarding molded products, we can assist you from consultation, material selection, drawing review, mold production, prototype creation, to mass production, so please feel free to contact us. Additionally, the manufacturing of these molded products will be handled by our "overseas partner company."

  • Composite Materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Low-pressure sealing thermosetting dry molding material Bioglass [Developed product]

Low-pressure sealing thermosetting dry molding material Bioglass [Developed product]

Contributes to the miniaturization of automotive components and the reduction of processes.

Mitsubishi Gas Chemical Next (formerly Nippon Yuka) has developed a low-pressure thermosetting dry molding material called "Bioglass" that enables insert molding, achieving both reduced production time and low-pressure molding for the encapsulation of miniaturized electronic materials. Compared to conventional materials, it allows for significant productivity improvements through rapid curing and post-curing elimination. It contributes to the "miniaturization" and "reduction of processes" in automotive components. 【Exhibition Information】 ■Exhibition Name: CEATEC2025 ■Dates: October 14 (Tuesday) to October 17 (Friday), 10:00 AM to 5:00 PM ■Venue: Makuhari Messe ■Hall Number: 3 3H008 ■Admission Fee: Free (Pre-registration required) ■Exhibition URL: https://www.ceatec.com/ja/ *For more details, please refer to the PDF document or feel free to contact us.

  • バイロ.png
  • Composite Materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Do you have any of these concerns? Unable to manage work progress.

Do you have any of these concerns? Unable to manage work progress.

It is possible to improve the efficiency of on-site operations and effectively manage inspection history. Winner of the 2021 TPM Excellent Product Development Award! Free trial currently available.

Are you struggling with reducing time and costs while achieving visibility? At MENTENA, we enable the "safe accumulation and utilization" of important data such as failures and operational rates! We facilitate the inheritance of skills and standardization of operations through the visualization of expert know-how. You can easily understand "who responded, when, and how"! MENTENA is a service that focuses on three key points: "easy," "easy to start," and "reliable support." 1. A simple usability that can be mastered in a one-day training session. 2. A flat-rate pricing plan that makes it "easy to start small." 3. A customer success team that provides comprehensive support for implementation. 【What you can do with MENTENA】 ■ Equipment information management ■ Work instructions ■ Smartphone and app usage ■ Assignment management ■ Ledger and data management ■ Document sharing ■ Checklists *For more details, please download the materials or contact us.

  • Production Management System

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
The necessity of resin in thermal management.

The necessity of resin in thermal management.

It is possible to extend battery life by preventing rapid temperature changes!

We would like to introduce our "insulating resin." Resin has a significantly lower thermal conductivity compared to iron and aluminum, which gives it high insulation properties. By utilizing this insulation, it enables the use of batteries at optimal temperatures. As a result, it allows for efficient use of batteries and extends the driving range. 【Product Lineup】 ■ Polyurethane ■ Polypropylene *For more details, please refer to the PDF document or feel free to contact us.

  • 熱マネジメント2.PNG
  • Other polymer materials
  • Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
UV curing resin for imprinting "Sunrad"

UV curing resin for imprinting "Sunrad"

Achieving both mold release properties and substrate adhesion! UV-curable resin capable of fine imprint molding.

"Sunrad" is a special release agent uniquely designed by our company, utilizing our expertise in surfactant technology, which exhibits high release properties against molds. It is a UV-curable resin that can accommodate various molds and allows for the transfer of fine patterns. The uniquely designed phosphorus-based special release agent is engineered to selectively gather on the mold side, resulting in high mold release properties while maintaining strong adhesion to the substrate film. 【Features】 ■ High-precision transfer even for special shapes and fine patterns ■ Resin is less likely to remain on the mold, reducing wear and preventing degradation of the mold ■ UV curing minimizes stress on the resin during release, making it less likely for defects such as chipping or cracking to occur *For more details, please refer to the related links or feel free to contact us.

  • Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Thin fluoropolymer (PTFE) adhesive tape "No.903UT"

Thin fluoropolymer (PTFE) adhesive tape "No.903UT"

Contributing to CO2 reduction with a thin and lightweight design! Achieving approximately 23% weight reduction compared to conventional products.

"No.903UT" is a thin type adhesive tape with a total thickness of 0.06mm, featuring excellent properties such as heat resistance, slip resistance, and water repellency. It has obtained Flame Retardant certification against UL510 flammability standards (Registration Number E34833). It can be continuously used in a wide temperature range of -60℃ to 200℃ (recommended value). Additionally, it can be used at even higher temperatures for short periods. 【Features】 ■ Thin type with a total thickness of 0.06mm ■ Approximately 23% lighter compared to conventional products ■ Excellent heat resistance, slip resistance, and water repellency ■ Continuous use possible in a wide temperature range of -60℃ to 200℃ *For more details, please refer to the PDF document or feel free to contact us.

  • 903UTサブ1.PNG
  • 903UTサブ2.PNG
  • Composite Materials
  • Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Market Report] Global Petroleum Resin Market

[Market Report] Global Petroleum Resin Market

Global Petroleum Resin Market: Promoting Innovation and Expected to Reach 5.4 Billion USD by 2031

The global petroleum resin market is witnessing a dynamic surge, driving innovation and transforming industries. According to recent market reports, the global petroleum resin market reported revenues of approximately $2.77 billion in 2022 and is projected to reach an estimated $5.4 billion by 2031. This remarkable growth trajectory is driven by a robust annual compound growth rate. A growth rate of 7.7% (CAGR) is expected during the forecast period from 2023 to 2031. Petroleum resins derived from cracked petroleum fractions are low molecular weight thermoplastic hydrocarbon resins known for their calming effects and slightly moist characteristics. These versatile resins are applied across a wide range of industries, including paints, coatings, printing inks, varnishes, lithographic inks, paper, adhesives, concrete hardeners, and rubber. Petroleum resins are available in various forms, including crushed nuggets, powders, solid blocks, flakes, solutions, beads, and dispersions. You can check the application method by clicking the [PDF Download] button or apply directly through the related links.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Research Material] Global Market for Ethyl Acetate Urethane

[Research Material] Global Market for Ethyl Acetate Urethane

World Market for Ethyl Acetate-based Urethane: Inks, Varnishes, Adhesives, Explosives, Artificial Leather, Textiles, Photography, Paper Coatings, Others, ...

This research report (Global Ethyl Acetate Grade Urethane Market) investigates and analyzes the current status and outlook for the global market of urethane for ethyl acetate over the next five years. It includes information on the overview of the global urethane market for ethyl acetate, trends of major companies (sales, selling prices, market share), market size by segment, market size by major regions, and distribution channel analysis. The segments by type in the urethane market for ethyl acetate cover inks, varnishes, adhesives, explosives, synthetic leather, textiles, photography, paper coatings, and others, while the segments by application focus on military, light industry, and others. The regional segments calculate the market size for urethane for ethyl acetate by dividing it into North America, the United States, Europe, Asia-Pacific, Japan, China, India, South Korea, Southeast Asia, South America, the Middle East, and Africa. It also includes the market share of major companies in the urethane market for ethyl acetate, product and business overviews, and sales performance.

  • Other services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Rapid realization of product development through material selection and engineering.

Rapid realization of product development through material selection and engineering.

Support from medical materials and design to prototype verification and mass production, all in one.

Our company is engaged in the manufacturing of medical devices and also handles medical materials primarily made from resin. We offer a wide range of biocompatible resins, including implant-grade, short-term contact grade, and other materials suitable for sterilization. As various conditions such as the class of medical devices, usage environment, and sterilization requirements overlap, the hurdles for availability increase. Consequently, we are seeing a growing number of inquiries for material selection, and we can propose materials tailored to specific applications. Additionally, by being involved from the design and development stage, we support manufacturing methods and costs for the final product, which is one of our strengths. Utilizing the latest technologies such as 3D printers and 3D/CT scanning, we can conduct design, prototyping, and verification, providing services to realize product commercialization more swiftly and reliably.

  • Contract manufacturing
  • 3D Printer
  • Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Information on Handling Resins] About Functional Resins

[Information on Handling Resins] About Functional Resins

Metal substitution! Clearing the conditions that metal fulfilled, metal parts are being converted to resin.

To convert from metal to resin, the plastic must meet the strength conditions and other necessary requirements that the metal parts satisfied. Generally, the weaknesses of plastic compared to metal include "low heat resistance," "low mechanical strength," and "high solubility in organic solvents." I will explain how plastic addresses each of these issues. [Conditions for Metal Replacement with Resin] ■ Improvement of heat resistance ■ Improvement of mechanical strength ■ Improvement of resistance to organic solvents For more details, please refer to the catalog or feel free to contact us.

  • Processing Contract
  • Resin processing machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Bondable at low temperatures of 90℃! MELTHENE G.

Bondable at low temperatures of 90℃! MELTHENE G.

Chemically modified resin of ethylene-vinyl acetate copolymer (EVA). It has excellent heat resistance, water resistance, and weather resistance, making it suitable for a wide range of applications!

"MELTHENE G" is a chemically modified resin made from ethylene-vinyl acetate copolymer (EVA). It possesses excellent properties as an interlayer for laminated glass, is easy to handle, and can be widely applied from general laminated glass to decorative laminated glass and other uses. Additionally, it can be bonded at a low temperature of 90°C, allowing for bonding through standard vacuum heating lamination. We offer various thicknesses, widths, and roll counts depending on the grade, so please feel free to consult us. 【Features】 ■ Bonding possible at a low temperature of 90°C ■ Easy to handle with no blocking of the interlayer ■ Excellent heat resistance, water resistance, and weather resistance ■ Superior adhesion to other plastics, including polyester ■ Capable of a wide range of applications *For more details, please refer to the catalog or feel free to contact us.

  • Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
HTM-type tandem two-axis kneading extruder capable of handling various resins.

HTM-type tandem two-axis kneading extruder capable of handling various resins.

Outstanding flexibility! If you're looking for a kneading extrusion that accommodates a wide range of resin blending processes, this is a must-see!

The "HTM-type tandem two-axis kneading extruder" is a two-axis kneading extruder capable of handling high-concentration masterbatches and rigid PVC, among others. By adopting segmented screws, the type and number of mixing rotors can be freely changed, allowing for a wide range of resin kneading processing. Additionally, there is almost no adhesion of resin in the mixing rotor section, and disassembly is easy, making color changes and disassembly/cleaning straightforward! 【Features】 ■ Achieves energy-saving in kneading operations ■ Capable of high shear and low-temperature kneading, suitable for high-concentration masterbatches and rigid PVC ■ Also supports continuous kneading of rubber and elastomers *For more details, please refer to the materials. Feel free to contact us with any inquiries.

  • Extrusion Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Resin

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.