We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Screw.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Screw×八幡ねじ - List of Manufacturers, Suppliers, Companies and Products

Screw Product List

1～13 item / All 13 items

Displayed results
Tapping screw "Shinka"

Tapping screw "Shinka"

It can be used in any industry aiming for weight reduction and will greatly contribute to improving competitiveness.

The tapping screw "Shinka" can be used in various industries aiming for weight reduction and significantly contributes to enhancing Japan's manufacturing competitiveness. It enables fastening to thin steel plates of 0.3 to 0.6 mm due to its high break torque and return torque. 【Features】 ○ Capable of fastening to thin plates (0.3 to 0.6 mm) ○ Reduced working time ○ Cost reduction For more details, please contact us or download the catalog.

  • bolt

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Thread rolling screw

Thread rolling screw

High-speed and space-saving linear motion! A screw that converts the rotational motion of a motor into linear motion.

The "transformed sliding screw" is a functional screw that converts the rotational motion of a motor into linear motion through a screw. The amount of movement per rotation is 45mm, providing high-speed performance. By reducing the contact area, it achieves high efficiency through excellent sliding properties. The resin nut uses a special resin that excels in sliding properties, heat resistance, and water absorption, allowing for low noise and lighter sliding with lower torque compared to trapezoidal screws. 【Features】 ■ Achieves high-speed linear motion and space-saving design ■ Maximum lead of 45mm ■ High efficiency through excellent sliding properties ■ The resin nut uses a special resin with added solid lubricants *For more details, please refer to the PDF document or feel free to contact us.

  • nut
  • bolt

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Washer-integrated screw for thin plates

Washer-integrated screw for thin plates

A screw with an embedded washer that achieves fastening to a thin plate by shortening the incomplete threaded section to the limit!

The "Washer-integrated screw for thin plates" features a screw with an incomplete thread section shortened to the limit, enabling fastening to plates thinner than standard products. The screw is firmly fastened right below the spring washer. It prevents head lifting and fastening failures, achieving secure fastening to thin plates. It accommodates various head shapes, and by changing the washer, it can also fasten even thinner plates. 【Features】 ■ Incomplete thread section shortened to the limit ■ Capable of fastening to thin plates ■ Low cost ■ Compatible with various head shapes *For more details, please refer to the PDF document or feel free to contact us.

  • nut
  • bolt

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Rolling screw

Rolling screw

A material that excels in sliding properties, heat resistance, and water absorption compared to polypropylene, nylon, and polyacetal.

The "sliding screw" is a screw that achieves high-speed linear motion and space-saving design. The resin nut is made from PPS as the base material, and a special resin with added solid lubricants (such as fluororesin) is used to improve sliding characteristics. Compared to polypropylene, nylon, and polyacetal, it is made from a material that excels in sliding performance, heat resistance, and water absorption, operates with lower noise compared to ball screws, and slides more lightly with lower torque than trapezoidal screws. 【Features】 ■ High efficiency achieved through excellent sliding properties ■ The resin nut is based on PPS ■ A special resin with added solid lubricants (such as fluororesin) is used to enhance sliding characteristics ■ Lower noise compared to ball screws ■ Slides more lightly with lower torque than trapezoidal screws *For more details, please refer to the PDF document or feel free to contact us.

  • bolt
  • nut

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Both screw shafts and nuts are compatible: rolled trapezoidal screw.

Both screw shafts and nuts are compatible: rolled trapezoidal screw.

Opening and closing function, speed, and lightweight! New features have been added to the trapezoidal screw.

The "Rolled Trapezoidal Screw" has a trapezoidal screw shape with a 30° angle for both the male and female threads, allowing it to bear loads on its surface and withstand high loads. The nut is made of bronze, which has excellent sliding properties and can endure high loads. Additionally, the screw shaft is formed by rolling, resulting in a uniform shape, and the surface of the screw is smooth and has excellent wear resistance. 【Features】 ■ Capable of processing left and right trapezoidal screws ■ Capable of processing multi-thread trapezoidal screws ■ Trapezoidal screw rolling possible for aluminum and hollow materials ■ Both male and female threads have a 30° trapezoidal screw shape, allowing them to bear loads on their surface and withstand high loads ■ Custom products beyond standard specifications are also accepted *For more details, please refer to the PDF document or feel free to contact us.

  • bolt
  • nut

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-tension steel plate tapping screw "Haika"

High-tension steel plate tapping screw "Haika"

Can also be used with steel plates with a tensile strength of 1,180 MPa! Ensures internal toughness and prevents brittle fracture.

"Haika" is a high-performance tapping screw specially designed for efforts to reduce weight using high-tensile steel plates. It offers excellent cutting performance with surface hardness that rivals high-tensile steel plates. The high torque ratio makes it easy to set the tightening torque. Additionally, it penetrates the counterpart material smoothly, allowing for low screwing torque and easy fastening. 【Features】 - "Surface hardness" and "cutting performance" that rival high-tensile steel plates - High surface hardness due to the adoption of new materials, with lower hardness in the core - Ensures internal toughness to prevent brittle fracture - The carburized layer on the surface is uniform, ensuring cutting performance - The core has a uniform martensitic structure *For more details, please refer to the PDF document or feel free to contact us.

  • bolt

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tapping screw "Delta PT"

Tapping screw "Delta PT"

This is a resin tapping screw developed by EJOT in Germany.

"Delta PT" is a tapping screw for resin developed by the German company EJOT. The screw threads and valleys have a special shape, allowing for smooth deformation of the female threads when screwed into the resin, which helps reduce damage to the resin. 【Features】 ○ Reusable ○ Easy to insert and resistant to loosening ○ Cost reduction For more details, please contact us or download the catalog.

  • bolt

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Seat metal embedded screw "Full Lock Screw"

Seat metal embedded screw "Full Lock Screw"

The definitive version of thin plate sems!!! Can be fastened to any thin plate!

The Full Lock Screw is a washer-integrated screw designed for fastening ultra-thin plates. Typical washer-integrated screws have an incomplete threaded section of about 2 pitches, which prevents thin plates from being securely tightened. However, the Full Lock Screw has no incomplete threaded section, allowing it to securely tighten even the thinnest materials. It is compatible with sizes from M2.5 to M6. 【Features】 - The screw's shaft diameter is smaller than the inner diameter of the nut, allowing for fastening to thin plates without contacting the nut. - It can be completely fastened even to products without fastening elements, such as terminal blocks. For more details, please contact us or download the catalog.

  • bolt

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tapping screw "ALtracs"

Tapping screw "ALtracs"

Achieve cost reduction without lowering fastening strength! Easy-to-insert tapping screws for lightweight alloys.

"Altrax" is a tapping screw for lightweight alloys made of aluminum, magnesium, zinc, or die-cast products. It has a high fastening force (axial force), achieving a fastening strength equivalent to or greater than that of bolts (small screws). Additionally, the contact area between the screw threads and the mating material is large, resulting in minimal reduction in fastening force due to environmental changes. The pitch is the same as that of metric screws, allowing for the use of small screws and bolts after forming internal threads with this product. 【Features】 ■ Thread shape - Thread angle 33°: Compared to a 60° thread angle, it has a smaller volume for forming internal threads and lower screwing torque. - Special tip shape: Easy to screw in (close to a triangular shape). ■ Reduction of processes shortens lead time. ■ Cost reduction. *For more details, please refer to the PDF document or feel free to contact us.

  • bolt

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Thread Rolling Technology

Thread Rolling Technology

The precision, strength, and beauty of the finished surface achieved by not cutting! Short delivery times and cost reduction effects as well.

The "thread rolling technology" maintains high productivity compared to cutting, and is characterized by precision, strength, and the beauty of the finished surface, making it a form of plastic processing. By not cutting, it saves material costs, and the processing speed is fast, which can shorten production days. It is also possible to process trapezoidal screws, rolled sliding screws, splines, and knurling. Rolling can also be done on aluminum materials and pipe materials. 【Features】 ■ Reduces material costs due to plastic processing ■ Fast processing speed shortens production days ■ Good finish quality and improved surface roughness ■ Custom screws can also be accommodated *For more details, please refer to the PDF document or feel free to contact us.

  • nut
  • bolt
  • Plastic processing machines (cutting and rolling)

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Thin plate tapping screw "Unifast"

Thin plate tapping screw "Unifast"

Can be fastened with a wide range of plate thicknesses! The counterpart material is held by three threads, demonstrating excellent fastening performance.

"Unifast" is a tapping screw for thin plates that can be fastened to a wide range of plate thicknesses from 0.2mm to 0.8mm. It allows for safe and strong fastening due to its low screwing torque and high breaking torque. It can be used in various industries aiming to improve productivity, achieving parts standardization and stable fastening. 【Features】 ■ Speedy fastening: Fastening time is about half that of JIS products ■ Parts standardization: Compatible with a wide range of plate thicknesses from 0.2t to 0.8t ■ Stable fastening ■ No need for burring processing ■ Reduction in the number of parts through parts standardization ■ The leading part has two of the three threads with lower thread height, reducing screwing torque ■ All three thread heights are aligned at the neck, allowing for strong fastening *For more details, please refer to the PDF materials or feel free to contact us.

  • bolt
  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Trapezoidal screw with rolling process

Trapezoidal screw with rolling process

Both the male and female threads have a trapezoidal thread shape with a 30° angle, allowing them to bear loads on the surface and withstand high loads.

The "Trapezoidal Thread" has a trapezoidal cross-section, making it easy to achieve axial precision during assembly. It is suitable for applications that bear thrust loads or high loads. The nut uses the durable "BC-6" material. We offer two types: straight type and flange type. 【Features】 ■ The thread cross-section is trapezoidal ■ Easy to achieve axial precision during assembly ■ Suitable for applications that bear thrust loads or high loads ■ The nut uses the durable "BC-6" material ■ Available in two types: straight type and flange type *For more details, please refer to the PDF document or feel free to contact us.

  • bolt
  • nut

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Aluminum tapping screw for resin use "Alu Armor PT"

Aluminum tapping screw for resin use "Alu Armor PT"

Use lightweight aluminum alloy fasteners for the resin. This will greatly contribute to efforts in weight reduction.

The "Alu-Arma PT" is an aluminum tapping screw specifically designed for resin, using the widely adopted A6056 material found in automobiles. Thanks to the high-strength coating "Alu-Arma," it can be used broadly from soft to hard resins. It can reduce the impact of axial force reduction due to thermal expansion differences compared to iron tapping screws. 【Features】 ■ Lightweight and high strength ■ Safe and reliable materials and manufacturing technology ■ Forms a uniform anodized coating with Alu-Arma treatment ■ Resistant to loosening ■ Can mitigate the effects of axial force reduction due to thermal expansion differences *For more details, please refer to the PDF document or feel free to contact us.

  • bolt

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Screw

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.