1～15 item / All 15 items
Weather-resistant resin waterproof speaker
This is a compact waterproof speaker designed as a 30W type trumpet speaker. It has a strong track record as an external speaker for car audio and car stereos, as well as for mobile sales, storefront sales, outdoor store use, and events. It is recommended for those considering promotional broadcasts for mobile sales using their existing car audio or car components.
Wall-mounted speaker that can be hung both vertically and horizontally.
A push-type terminal that allows for speaker connections with a single touch. It is a high-impedance speaker with built-in transformer, equipped with terminals of 10W 1kΩ and 5W 2kΩ.
A compact horn speaker of the smallest class, usable outdoors with 20W.
The outdoor speaker NZ-S21H is a high-impedance speaker with a built-in 500Ω transformer, measuring 120mm x 120mm in diameter and 190mm in total length, making it one of the smallest 20W speakers available.
A compact broadcast speaker that can be installed anywhere.
The speaker section (horn section) is made of ABS resin. The screws are made of stainless steel, and the mounting stay is made of painted iron. It is a high-impedance speaker that can be installed outdoors.
As a 20W horn speaker, it is in the smallest class.
As a 20W horn speaker, it is quite small in size, making it suitable for those looking for a compact horn speaker due to space constraints. It is a low-impedance (8Ω) type commonly used in car amplifiers. When two of these speakers are connected in parallel, the combined impedance is 4Ω. They can also be connected to a component system for use as outdoor speakers. It is a drip-proof type that can be used outdoors even in rainy weather. It comes with approximately 1 meter of highly weather-resistant cap-tire cable. The use of a cable gland prevents water ingress.
8Ω, 20W, round waterproof horn speaker
A waterproof speaker made of weather-resistant resin. The mounting brackets and screws are made of stainless steel. The thickness of the stainless steel mounting brackets is approximately 3mm, making them sturdy. A speaker cable with a length of about 1m is included.
Custom speaker that has replaced the short original cable of about 1 meter with a 10-meter long cable.
20W Speaker with 10m Cable This is a custom speaker that has replaced the short genuine cable of just under 1m with a 10m long cable. The cable itself has been replaced, not just added. Custom 8 Ohm 20W Speaker This is a modified version of the NZ-S20 8 Ohm 20W speaker, which has a strong track record as a car speaker and outdoor speaker (cable replacement version). Since the cable is replaced internally within the speaker, the waterproofing of the connection point is not compromised, but the color coding of the cable changes. Polarity: White is HOT, Black is COM For the 10m cable speaker listed on this page, the white cable color is HOT and the black is COM. (Before the cable change, red was HOT and black was COM.)
Custom speaker that has replaced the short genuine cable of about 1 meter with a long 10-meter cable.
Custom product of NZ-S30 The base speaker is the NZ-S30 16 Ohm 30W, which has a proven track record for use in vehicles and outdoors. Since the cables are replaced inside the speaker, the waterproofing of the junction is not compromised. The polarity is white for HOT and black for COM. For the 10m cable speaker listed on this page, the cable colors are white for HOT and black for COM. (Before the cable change, red was HOT and black was COM.)
This is a custom speaker that has replaced the short original cable of about 1 meter with a long 10-meter cable.
20W Speaker with 10m Cable This is a custom speaker that has replaced the short genuine cable of just under 1m with a 10m long cable. The cable itself has been replaced, not just added. Custom 8 Ohm 20W Speaker This is a modified version of the NZ-S22 8 Ohm 20W speaker, which has a proven track record as a car speaker and outdoor speaker (cable replacement version). Since the cable is replaced internally within the speaker, the waterproofing of the connection point is not compromised, but the color coding of the cable changes. Polarity: White is HOT, Black is COM For the 10m cable speaker listed on this page, the white cable color is HOT and the black is COM. (Before the cable change, red was HOT and black was COM.)
Powerful trumpet-shaped ringtone speaker
Pick up ringtones and amplify powerfully The ringtones from mobile phones, smartphones, and PHS are picked up by a pickup microphone and amplified loudly through a trumpet-shaped speaker. Loud volume that overcomes noise The ringtone resonates from the highly directional trumpet speaker, making it suitable for noisy environments such as factories, construction sites, and agricultural work far from buildings. Of course, the volume can also be adjusted (turned down). Close-contact sound collection with a pickup microphone The clip-type microphone allows the sound collection part to be clamped onto mobile phones, ensuring close contact with the microphone part. *Note: Regular telephones cannot be used as there is no part to clamp with the clip. (Even if clamped, the sound collection efficiency is poor with regular telephones, and loud volume cannot be expected.) Also usable as a regular microphone amplifier In addition to the pickup microphone, a coiled cord hand microphone is included, allowing it to be used as a standard microphone amplifier broadcasting device.
A weather-resistant resin speaker. This outdoor speaker can be installed not only in cars but also in heavy machinery and ships.
Weather-resistant resin car speakers. The mounting stay allows for two levels of height adjustment.
Compact and unobtrusive outdoor speaker with built-in transformer.
This is a 15W 660Ω high-impedance speaker with a built-in transformer. It is an outdoor speaker in a gray color scheme that does not compromise the appearance of buildings or schools.
Broadcast speaker, can be used as a wall-mounted speaker or simply placed!
8Ω10W low impedance speaker. Push-type terminal for easy one-touch speaker connection. The black terminal is connected to COM, and the red terminal is connected to HOT (8Ω).
A compact speaker that can be installed in the engine room due to its heat-resistant specifications.
This is a compact speaker with a heat-resistant design that can be installed in an engine room. It can be used under harsh weather conditions with a temperature range of -10°C to 100°C. The speaker cable used is H-VFF 0.75 mm². It features a drip-proof structure, making it safe to install outdoors, on vehicles, or on ships even in rainy weather. *It is recommended to install it horizontally to prevent water from accumulating inside. Despite its small size, it is a genuine square trumpet speaker with a rated input of 10W and a rated impedance of 8Ω.
It is a custom speaker with a 10m cable.
This is a custom speaker with a 10m cable, designed to meet the request for a long cable without extension. The base speaker is the NZ-S10 8 Ohm 10W, which has a proven track record for use in vehicles and outdoors. Since the cable is replaced internally within the speaker, the waterproof integrity of the connection is not compromised. For the 10m cable speaker listed on this page, the cable colors are white for HOT and black for COM. (Before the cable change, red was HOT and black was COM.) The mounting stay has been processed with holes for height adjustment in two stages!
