We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Steel Plate.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Steel Plate(20) - List of Manufacturers, Suppliers, Companies and Products

Last Updated： Aggregation Period:Oct 15, 2025～Nov 11, 2025
This ranking is based on the number of page views on our site.

Steel Plate Product List

1～15 item / All 82 items

Displayed results
Customer use case: Reduced the weight of a wooden trailer by 20% with Strenx.

Customer use case: Reduced the weight of a wooden trailer by 20% with Strenx.

Due to being lightweight and highly durable, the loading capacity of wooden trailers is improved!

We would like to introduce a case where high-strength weather-resistant steel 'Strenx 700MC' was introduced to the Austrian timber transport vehicle manufacturer Gsodam. By switching to this product, the weight of the trailer was reduced by 10 to 20 percent, allowing for an increase in payload by 100 to 400 kilograms, while also showing very little deformation during welding and cutting, resulting in excellent performance. "We received feedback that it arrives adjusted from the partner, so it can be processed as is, saving time and costs." [Case Overview] - Strenx steel plates extend the lifespan of subframes and timber bodies, enhancing durability. - Weight reduction is key. - Lightweight design increases payload. *For more details, please download the PDF or feel free to contact us.

  • Steel
  • Special Steel

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Weldable High Tensile Steel Plate "CK-BESTEN"

Weldable High Tensile Steel Plate "CK-BESTEN"

Excellent mechanical properties! Steel plates with high yield point and tensile strength, allowing for lightweight structures.

"CK-BESTEN (540, 590, 590Y)" is a high-strength steel plate with excellent weldability, used in construction, bridges, industrial machinery, vehicles, and other structures. Compared to ordinary steel materials, it has a higher yield point and tensile strength, allowing for lightweight structures. Being a non-quenched type, it is stable against thermal history, and there is no material degradation even after hot processing. 【Features】 ■ Mechanical properties ■ Wear resistance and weather resistance ■ Workability ■ Weldability ■ Cost-effectiveness For more details, please refer to the catalog or feel free to contact us.

  • Steel

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fluorine-coated steel plate, caulking for colored steel plates 'Roof Cork NB-Q'

Fluorine-coated steel plate, caulking for colored steel plates 'Roof Cork NB-Q'

Fluorine-coated steel sheets, caulking for colored steel sheets "Roof Cork"

Adopted in many projects around the world! Roof Cork NB-Q *NB = Non-Bleed Q = Quick Dry Type Non-toxic building material for humans and the environment Certified by Singapore Green Building Council! In Europe, it is also used as a roof repair material for BMW transport trucks! 【Features】 - Can adhere to fluorinated steel plates. - Fast curing & non-bleed type! - Since it is a non-bleed type, it is less likely to be sticky even after painting. - Can adhere to various substrates without a primer. - Better weather resistance compared to conventional modified silicone. - Fast curing type allows for quick transition to the next process. - The world's first high weather-resistant modified silicone! Certified as green building material in 2018 by SGBC.

  • Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Non-oriented electrical steel (NO)

Non-oriented electrical steel (NO)

Sales and processing of high-spec electromagnetic steel sheets exclusively for EV motors (such as 15CS1000HF, 20CS1200HF, 25CS1250HF, etc.).

Rei Steel Industry obtained automotive-level IATF certification in 2018 and is engaged in the sale of high-spec electromagnetic steel sheets (such as 15CS1000HF, 20CS1200HF, 25CS1250HF) specifically for EV motors made by China Steel Corporation (CSC) in Taiwan, as well as standard electromagnetic steel sheets (35CS250~65CS1300). We also perform press forming of motor cores for EVs for Volkswagen. With investment from the Japanese company JFE, we have introduced Japanese-style management and supply electromagnetic steel sheets to Taiwanese factories of Japanese companies such as MITSUMI, YAMAHA, HITACHI, Panasonic, and Mabuchi Motor. Our factory uses high-precision slitting machines from Japan's Komei Corporation, providing overwhelming competitiveness through slitting and pressing processing centers. We have over 30 years of sales experience in Japan, offering stable delivery times, reliable quality, as well as Japanese language support and on-site technical assistance, making us a trustworthy company due to our sustainable management. If you have any questions or inquiries, please feel free to contact us.

  • transformer
  • electromagnet
  • Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Introduction of AJATO products: "Terminal Components"

Introduction of AJATO products: "Terminal Components"

Leave precision press processing to us.

At AJATO, we consistently handle everything from mold design to press processing, allowing us to respond flexibly to various situations. We have the equipment to manufacture both single and progressive dies according to customer requirements, and we also collaborate with skilled subcontracting factories, enabling us to accommodate a wide range of needs from embossed packaging to simple assembly. ★ Progressive press machines and forming machines for presses below 65 tons ★ Expertise in processing materials with thicknesses from 0.05 to 2.0 mm ★ Dimensional accuracy of ±0.01 ★ Over 20 years of experience Please contact us for more details.

  • EMC countermeasure products
  • Processing Contract
  • Other molds

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Processed material: electrical steel sheet

Processed material: electrical steel sheet

Our core products are manufactured using electrical steel sheets produced by JFE Steel Corporation in Japan and China Steel Corporation in Taiwan.

Our company uses electromagnetic steel sheets from JFE Steel Corporation in Japan and China Steel Corporation in Taiwan, and by having the most extensive lineup of electromagnetic steel sheets in Taiwan, we are also able to accommodate special specifications and custom orders. ● Grain-oriented electrical steel sheets (GO): Symbols: 20JGH090(M2)~35JG155(M6) ● Non-grain-oriented electrical steel sheets (NO): Thickness (mm): 0.15, 0.2, 0.25, 0.35, 0.5, 0.65; Symbols: 20JNEH1500~50CS1300 & 15CS1000HF~65CS1300 If you have any questions or inquiries, please feel free to contact us.

  • transformer
  • electromagnet
  • Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Customer usage example: The lifespan of dump truck bodies improved by 40%.

Customer usage example: The lifespan of dump truck bodies improved by 40%.

Zetterbergs' new tipper truck body, utilizing Hardox wear-resistant steel, achieves a 20% weight reduction and a 40% increase in lifespan.

Zetterbergs develops, manufactures, and sells various dump truck bodies, tipper trucks, tipper trailers, flatbed trucks, and refuse collection vehicle superstructures. Since upgrading to SSAB's premium material Hardox 500 Tuf wear-resistant steel plates, the lifespan of the company's dumpers has increased by at least 40%. With the ZD4, the company set three goals: a 20% weight reduction, an attractive design, and a low-floor dumper, all of which have been achieved. [Case Summary] - The lifespan of dump truck bodies has improved by 40%. - Smooth upgrade of dump truck and tipper truck bodies to Hardox 500 Tuf. - Dumper bodies made of Hardox 500 Tuf realize Zetterbergs' goals. *For more details, please download the PDF or feel free to contact us.

  • スクリーンショット 2025-06-11 152911.png
  • Special Steel

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wear-resistant steel plate "Hardox HiAce"

Wear-resistant steel plate "Hardox HiAce"

No preheating is required for thicknesses up to 8mm! This material is extremely resistant to abrasive wear and corrosion, specifically designed for acidic environments.

"Hardox HiAce" is a new wear-resistant steel plate designed for acidic environments. The plate thickness ranges from 4 to 25.4 mm, with a Brinell hardness of 425-475 HBW, and it exhibits a minimum value of 27 J at -20°C in the Charpy impact test. Recommended processing methods include bending and welding. According to the results of the overlap joint welding crack test, preheating is not required for thicknesses up to 8 mm. 【Features】 ■ Specialized for acidic environments ■ Plate thickness ranges from 4 to 25.4 mm ■ Brinell hardness of 425-475 HBW ■ Exhibits a minimum value of 27 J at -20°C in the Charpy impact test ■ No preheating required for thicknesses up to 8 mm *For more details, please refer to the PDF document or feel free to contact us.

  • image_28.png
  • image_03.png
  • image_04.png
  • image_06.png
  • image_05.png
  • image_29.png
  • image_30.png
  • image_01.png
  • image_02.png
  • Special Steel

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Customer Use Case: Achieving Lightweight Design with Strenx Structural Steel

Customer Use Case: Achieving Lightweight Design with Strenx Structural Steel

Achieve maximum reach and efficiency with steel plates cut to the desired length!

We would like to introduce a case where the HOLMER company's sugar beet harvester achieved a lightweight design using high-strength weather-resistant steel 'Strenx' structural steel. The company needed to adapt to extreme conditions such as drought, waterlogging, crops covered with dead leaves and weeds, sandy, loamy, and rocky soils, aiming to reduce the weight of the harvester's frame and improve performance by adopting 'Strenx Tube 700 MLH.' After implementation, the weight of the sugar beet harvester was reduced by 20%, minimizing soil compaction, reducing fuel consumption, and enhancing productivity. [Case Overview] ■ Achieved maximum reach and efficiency with steel plates cut to the desired length ■ Maximum yield with minimal downtime *For more details, please download the PDF or feel free to contact us.

  • HOLMER 社2.png
  • Steel
  • Special Steel

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Latest upgrade wear-resistant steel plate Hardox 500 Tuf

Latest upgrade wear-resistant steel plate Hardox 500 Tuf

Hardox 500 Tuf combines the best characteristics of Hardox 450 and Hardox 500, offering excellent performance.

The latest upgrade in the Hardox series, Hardox 500 Tuf, not only has the same hardness as Hardox 500 but also features a narrower nominal hardness range (475–505 HB) and a minimum nominal hardness that is higher than that of Hardox 500. With guaranteed impact toughness (27 J at -20°C), its wear resistance in simulations is improved by 35% to 40% compared to Hardox 450. Additionally, while Hardox 500 Tuf has the same hardness as Hardox 500, it possesses the same bending characteristics as Hardox 450, and welding does not require preheating for thicknesses below 16 mm, making it easier to process.

  • 14-耐摩耗鋼板HARDOX500TUF.JPG
  • 1-タンプボテイ.jpg
  • Other metal materials
  • Contract manufacturing
  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Device parts Bonded steel plate 1.6t (device parts)

Device parts Bonded steel plate 1.6t (device parts)

Punch laser composite processing, laser processing, press processing, bending processing, welding finishing.

Proposals from the design stage We pursue NC (Numerical Control) and digitalization to accommodate mass-produced items. We also support prototyping and small-batch, diverse production with skilled techniques.

  • Other molds

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Development proposal at the design stage.

Development proposal at the design stage.

With the motto 'To be of service!' we will solve the designers' problems.

Fuji Seiko Co., Ltd. stands on the customer's side, understanding product functions and conducting proposal-based sales from the development stage. We provide a consistent process from design to prototyping to mass production, offering rationalization proposals with an eye on final mass production. If we receive drawings at the conceptual stage, we can consider the feasibility of the product and provide technical proposals, which is one of our strengths. Our company manufactures press molds, performs press processing, and conducts molding processing in-house. Utilizing our press technology, we offer proposals that find benefits in quality, cost, and delivery through a continuous insert hoop molding line. 【Development Proposal Examples】 ■ Want to integrate multiple components ■ Want to convert machined parts to pressed parts ■ Want to apply spring processing on both sides of molded parts ■ Want to embed terminal cut surfaces within molded parts ⇒ Solving designers' concerns ⇒ Bold design changes incorporating VE/VA are possible! For more details, please refer to our catalog or feel free to contact us.

  • Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
HARDOX wear-resistant liner product case studies

HARDOX wear-resistant liner product case studies

For liners of equipment that experience severe wear, HARDOX wear-resistant steel plates are optimal as they demonstrate wear resistance and impact resistance in harsh operating environments.

The liners made from wear-resistant steel plate HARDOX not only possess excellent toughness and high strength, but also exhibit outstanding weldability and workability. Moreover, they maintain high toughness and high hardness even at low temperatures of -40°C. 【Features】 ● High wear resistance, 25 times that of ordinary steel in the case of HX600 ● High hardness, Brinell hardness of 600 in the case of HX600 ● High strength, tensile strength of 2000 MPa in the case of HX600 ● High toughness, impact value of 20 J at -40°C in the case of HX600 ● Uniform strength, hardness, and toughness throughout the core ● No need for buildup, heat treatment, or surface treatment ● Excellent weldability and workability ● Impact resistance and weld crack resistance are ensured even in cold regions ● Options available for various grades, thicknesses, and applications ● Custom and made-to-order options available 【Content Note: For more details, please refer to the catalog.】

  • 02-6-HX400　ﾌﾟﾚｽﾍﾞｯﾄﾞﾗｲﾅｰ　.JPG
  • 04-HX400-50t(スクレーパーライナー）.jpg
  • 07-HX400アームライナー.JPG
  • 10-大晋機工.JPG
  • 12-X1645 ﾓﾘﾏｼﾅﾘｰ　HX500-12t曲げライナー.JPG
  • 22-耐摩耗鋼HARDOX500 T型ライナー.JPG
  • 16-X0675 外側ライナーHARDOX500　19tx125x720（曲げ加工）.JPG
  • 23-HARDOX500スタッドボルトライナー.JPG
  • 26-X2697ボックスライナー.jpg
  • Mechanical Design
  • Crusher
  • Powder Supply Device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Corrosion-resistant wear plate "Hardox HiAce"

Corrosion-resistant wear plate "Hardox HiAce"

Prevention of corrosion in acidic and humid environments. Achieves high hardness and excellent wear resistance. Also excels in workability, with uniform and consistent quality.

The corrosion-resistant wear plate "Hardox HiAce" is a material that solves the problems of corrosion and wear in fields such as waste management, waste-to-energy plants, mining industry, and processing industry. While it has a Brinell hardness equivalent to "Hardox 450" in the same series (425–475 HBW), it achieves an excellent minimum value of 27 J at -20°C in the Charpy impact test, extending its lifespan in lower pH environments by 2.7 times. 【Features】 ■ Prevents corrosion of machinery and equipment in acidic corrosive environments ■ Available in thicknesses from 4.0 to 38 mm, with a maximum width of 2,500 mm and a maximum length of 11,000 mm ■ Suitable for operation in sub-zero temperatures ■ Achieves significant reduction in CO2 emissions during production *For detailed specifications, please download the catalog. <We will be exhibiting at the 2025 New Environment Exhibition / Global Warming Prevention Exhibition> May 28 (Wed) - 30 (Fri), 2025 Tokyo Big Sight, Booth Number: East Hall 3 A346 We sincerely look forward to your visit!

  • Steel

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
WEL-TEN

WEL-TEN

Achieving lightweight and long lifespan! Strong in tension, with processability equivalent to ordinary steel.

"WEL-TEN" is a high-tensile steel plate that excels in corrosion resistance and is less prone to rust even in environments exposed to rain and wind, extending the product's lifecycle in an economical and eco-friendly manner. It can be used in a wide range of applications including pressure vessels, heavy oil and crude oil tanks, penstocks, bridges, steel frames, construction machinery, and industrial machinery. It can be cut under conditions similar to those of ordinary steel, and welding can also be performed using the customer's existing equipment. [Features] ■ Lightweight ■ Long lifespan ■ Cost reduction *For more details, please refer to the PDF materials or feel free to contact us.

  • Special Steel

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Steel Plate

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.