Last Updated： Aggregation Period:Aug 05, 2026～Sep 01, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Aug 05, 2026～Sep 01, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Aug 05, 2026～Sep 01, 2026
This ranking is based on the number of page views on our site.
811～840 item / All 1036 items
Distribution outlet (Carecom specification) BC-S
■Overview - Up to two sensors (plug type) can be connected to the Metacon 2-pin nurse call system. - Existing nurse call substation outlets and push-button switches can be used in conjunction with the sensors. - It comes with a rear magnetic mount and hook for surface mounting.
Distribution outlet (Carecom specification) BC-4RS
■Overview ●Up to two sensors (plug type) can be connected to the Carecom 4-pin nurse call system (Type R, Type S). ●Existing hand-held substation outlets and hand-held substations can be used in conjunction with the sensors. ●It is surface-mounted and comes with a rear magnetic mount and hook for installation.
This is a wireless wandering notification set that alerts you when the mat sensor is stepped on.
■Notification of Elderly Wandering ■Please place the mat sensor near the exit. When an elderly person who tends to wander steps on the mat sensor while trying to go out, it will transmit a signal and notify the receiver. ■Six types available to choose from based on your needs ■We offer standard and wide sizes for the mat sensor, and fixed, portable, and tabletop types for the receiver. We have prepared six types by combining these options, so please choose according to your needs. - HS-W(T): Mat sensor/standard size, receiver/tabletop type - HS-W(KE): Mat sensor/standard size, receiver/portable type - HS-W: Mat sensor/standard size, receiver/fixed type - HS-W68(T): Mat sensor/wide size, receiver/tabletop type - HS-W68(KE): Mat sensor/wide size, receiver/portable type - HS-W68: Mat sensor/wide size, receiver/fixed type *This is a set of one mat sensor, one transmitter, and one receiver, but additional units can be purchased separately.
This is a wireless wandering notification set that alerts you when the mat sensor is stepped on.
Notification of Elderly Wandering Please place the mat sensor near the exit. When an elderly person who tends to wander steps on the mat sensor while trying to go out, it will transmit a signal and notify the receiver. Six types available to choose from based on your needs Tabletop type: You can choose from 8 different melodies or chimes, and it visually notifies you with a built-in flashlight. The notification time can be selected from 7 options ranging from 3 seconds to 120 seconds, or you can choose "continuous." Installation type: You can select between "hold mode," which continuously sounds and displays a lamp until reset after receiving the signal, and "3-second mode," which ends after 3 seconds. Portable type: Compact and lightweight, rechargeable with a dedicated charger included. It notifies you with three levels of volume, vibration, and an LCD display. You can choose the notification time (20 seconds/2 minutes/5 minutes/10 minutes). A strap is also included. Wireless and no wiring required ● The transmission range of the transmitter is approximately 100 meters in line of sight, allowing for easy use without worrying about wiring. ● It is pre-registered for radio signals, so you can use it immediately.
This is a wireless wandering notification set that alerts you when the mat sensor is stepped on.
■Notification of Elderly Wandering ■Please place the mat sensor near the exit. When an elderly person who tends to wander steps on the mat sensor while trying to go out, it will transmit a signal and notify the receiver. ■Six types available to choose from based on your needs ■The mat sensors come in standard and wide sizes, and the receivers are available in fixed, portable, and tabletop types. We have prepared six combinations, so please choose according to your needs. - HS-W(T): Mat Sensor/Standard Size, Receiver/Tabletop Type - HS-W(KE): Mat Sensor/Standard Size, Receiver/Portable Type - HS-W: Mat Sensor/Standard Size, Receiver/Fixed Type - HS-W68(T): Mat Sensor/Wide Size, Receiver/Tabletop Type - HS-W68(KE): Mat Sensor/Wide Size, Receiver/Portable Type - HS-W68: Mat Sensor/Wide Size, Receiver/Fixed Type *This set includes one mat sensor, one transmitter, and one receiver, but additional units can be added for each.
It is a wireless wandering notification set that uses a mat sensor placed in the wandering area to alert when the mat sensor is stepped on.
■Features ● This is a combination product of the mat sensor transmitter and the tabletop receiver "HC-350" / portable receiver "RXF-60K". ● It comes pre-registered for immediate use. ● When the mat sensor is stepped on, it transmits a signal, which is received by the receiver installed within 100 meters. (However, the distance may be shorter depending on surrounding conditions, such as being inside a reinforced concrete building.) ■Mat Sensor Transmitter ● It has a user-friendly size of 400mm x 800mm. ● It features a pause timer that temporarily halts operation (for about 5 minutes). ● When the battery level is low, both the transmitter and receiver will notify you. ● It is a high-sensitivity, thin type with a thickness of 6mm, designed with a non-slip surface on the back to prevent slipping on the floor. ● The battery life is approximately 2 years with 10 transmissions per day (using 2 AA alkaline batteries). ● It has a simple waterproof structure. ■Selectable "Receiver" <Tabletop Receiver> ● When it receives a signal from the transmitter, it notifies you with a gentle melody (chime sound) and a flashlight. ● The melody (chime sound) can be selected from 8 different types. ● The notification time can be selected from 3 seconds to 120 seconds in 7 variations, as well as continuous mode.
A bed sensor with an integrated transmission unit! It is easy to operate and handle because there are no cables.
■Usage and Operation ●It is used by placing it under the sheets or under the futon. ●Please use it for those who have difficulty getting up from or leaving the bed. ●It wirelessly notifies a receiver 100 meters away when getting up from the bed. ■Bed Sensor Transmitter ●The time for determining getting up can be set in 8 different ways (1 to 8 seconds). ●The pause timer temporarily halts operation (for about 5 minutes). ●The sensor part is a high-sensitivity, thin type with a thickness of 5mm (size: 250mm x 800mm). ●It comes with a "non-slip backing" and "string threading hole" to prevent slipping. ●The battery life is approximately 2 years with 10 transmissions per day (using 2 AA alkaline batteries). ●It has a simple waterproof structure. ●Non-slip bed sensor. ●The transmitter and detection parts are integrated, allowing for easy transport without tangled cords. ■Radio Wave Characteristics ●The transmission range of the transmitter is approximately 100 meters in line of sight. It can be easily installed in homes or places without existing nurse call systems. ●The radio waves are pre-registered, so it can be used immediately.
This is a wireless wandering notification set that alerts you when you get out of bed.
■Features ● This is a combination product of the bed sensor transmitter "TX-BS3" and the tabletop receiver "HC-350"/portable receiver "RXF-60K." It is pre-registered for radio frequency settings so you can use it immediately. ● The bed sensor is placed under the sheets or futon. ● When the user gets up from the bed, it transmits a signal to the receiver installed within 100 meters. (However, the distance may be shorter depending on the surrounding conditions, such as in reinforced concrete buildings.) ● The bed sensor is an integrated unit with a detection part and a transmission part, making it easy to install and carry. ● It has a wake-up time setting function, allowing operation tailored to the user. ■Bed Sensor Transmitter ● The wake-up judgment time can be set to one of eight options (1 to 8 seconds). ● The pause timer temporarily halts operation (for about 5 minutes). ● The sensor part is a high-sensitivity, thin type with a thickness of 4mm (size: 250mm x 800mm). ● It features a "non-slip back" and "string threading hole" to prevent slipping. ● The battery life is approximately 2 years with 10 transmissions per day (using 2 AA alkaline batteries). ● It has a simple waterproof structure.
The door/window sensor transmitter and portable receiver are bundled together. They are pre-registered for radio frequency settings so you can use them immediately.
■ Door and Window Sensor Transmitter ● Comes with a switch that staff or family members can use to turn it on and off. ● Can be easily installed on sliding doors or hinged doors (screws and double-sided tape included). ■ Includes double-sided tape that "leaves no residue after removal." It allows for easy installation and removal without damaging the installation surface. ● The transmitter is powered by batteries, so there is no need for electrical work. ● Uses a dedicated lithium battery for long life (approximately 8 years with 20 transmissions per day). ■ Portable Receiver ■ Rechargeable with a dedicated charger included. Ultra-compact, palm-sized. ■ Can notify using both a buzzer sound and a vibrator. ■ Notification time can be selected (20 seconds / 2 minutes / 5 minutes / 10 minutes). Features an easy-to-understand LCD display with an optional 3-digit channel display. ■ Repeater (Optional) RTXF-300 Relays low-power radio waves and transmits signals up to 100 meters in line of sight. Multiple repeaters can be added as needed.
A seat sensor is placed on the wheelchair and used while seated. When you get off (or fall from) the wheelchair, it will notify you with a flash and melody.
Features ● This is a combination product of the seat sensor "BSP-33," the jack-equipped transmitter "HC-116(B)," and the tabletop receiver "HC-350"/portable receiver "RXF-60K." ● The radio registration settings are pre-configured for immediate use. ● If a person gets off (or falls from) the wheelchair, the receiver installed within 100 meters will notify you. (However, the distance may be shorter depending on surrounding conditions, such as being inside a reinforced concrete building.) Seat Sensor - Daily life waterproof specification ● Detection output: No-voltage a contact (when pressure is applied) ● Pressure sensitivity: 1.6–1.8 kg/10 cm² ● Material: Surface - PVC (cream), Back - soft PVC (gray) ● External dimensions: 330 × 330 × 6 mm ● Lead wire: 1m cable with Kevlar wire (cream color/RCA plug included) Dedicated Jack-equipped Transmitter HC-116(B) (with on/off switch): Includes two AA alkaline batteries and a strap with a clip.
Use seat sensors placed on wheelchairs or chairs.
■Features ● This is a combination product of the seat sensor "BSP-33," the jack-equipped transmitter "HC-116(B)," and the tabletop receiver "HC-350"/portable receiver "RXF-60K." ● The radio registration settings have been pre-configured for immediate use. ● If the user gets off (or falls from) the wheelchair, the receiver installed within 100 meters will notify you. (However, the distance may be shorter depending on surrounding conditions, such as being inside a reinforced concrete building.) ■Seat Sensor - Everyday waterproof design ● Detection output: No-voltage a contact (when pressure is applied) ● Pressure sensitivity: 1.6–1.8 kg/10 cm² ● Material: Surface - PVC (cream), Back - soft PVC (gray) ● Dimensions: 330 × 330 × 6 mm ● Lead wire: 1m Kevlar wire cable (cream color/RCA plug included) ■Dedicated Jack-equipped Transmitter ■HC-116(B) (with on/off switch): Includes two AA alkaline batteries and a strap with a clip.
We will notify your family 100 meters away. The tabletop receiver will alert you with a flash and melody.
■Quickly catch wandering elderly individuals ■Sensors installed near exits quickly detect the movements of wandering elderly individuals and notify you via receivers set up within 100 meters. ■This helps protect the safety of the elderly and reduces the burden on their caregiving families. ■Notification through sound and light ■When wandering is detected, the receiver installed within 100 meters alerts you with melodies and flashes. ■Installable anywhere without location restrictions ■The sensor is battery-operated, allowing installation in places without power. ■Additionally, it is wireless, eliminating the need for wiring work, and it is compact and unobtrusive. ■Wandering Notification Detection Set ■We offer a lineup of combinations with two types of transmitters and three types of receivers, totaling six variations.
It is a sensor with two functions: "Wandering Notification" and "Emergency Call." It is easy to use; just clip it to something you want to be notified about when it is moved away.
■Operation ■The clip emergency sensor transmitter can be attached to items you want to be notified about when they are moved or separated. When the string is pulled, it sends a low-power radio signal to a receiver within 100 meters to alert you. ■Clip Emergency Sensor Transmitter 《Two Convenient Functions》 ●The call button on the main unit can be used for emergency or calling purposes. ●You can use it by clipping it onto items you want to be notified about when they are moved away. 《Easy Installation and Operation with Abundant Accessories》 ●You can use the included long and short clips and carabiners for various purposes. ●The transmitter can be easily mounted using the included double-sided tape or Velcro tape. 《With On/Off Switch》 ●It comes with an on/off switch for staff or family members. (The main unit's "call" button operates continuously regardless of the ON/OFF status.) ●The transmitter uses two AA alkaline batteries and can last for about 5 years (if transmitting 10 times a day). It has a low battery alert function. 《No Wiring Required》 ●The radio signal reach from the transmitter to the receiver is approximately 100 meters in line of sight. It can be easily installed in homes or facilities. ●The clip with the string has a safety feature that allows it to detach when a certain amount of force is applied.
One-touch emergency call! It is a multifunction type that can also connect with various sensors.
■Easy operation with large buttons ■Adopted large push buttons that are easy to operate for the elderly. ■Up to 10 emergency contacts can be registered ■During an emergency call, it will redial up to 9 times to a maximum of 10 registered contacts. (One answered call will end the emergency notification.) ■Optional message addition is possible ■During an emergency call, it will notify with a 'custom (voice recording up to 15 seconds) + fixed (about 6 seconds, selectable from 16 types)' message. ■System expansion is possible with 6 input contacts and 2 control outputs ■It has 6 input contacts for activating the emergency call, one powered output for LED indicators, and one voltage-free contact output that can also be used for remote control. ■A talkable wireless push button (optional) is available ■You can use up to 8 optional subunits 'talkable wireless push button [TPC-30]'. (Radio range approximately 20m in line of sight) ■Register 3 frequently dialed numbers to one-touch buttons By pressing the one-touch button on the main unit, it will automatically dial without lifting the receiver, allowing for hands-free conversation directed towards the main unit.
In case of emergency, simply press the transmitter to call the staff. The tabletop receiver will notify you with a flash and melody.
■Emergency Call Set ■The Emergency Call Set features two types of transmitters and three types of receivers, offering six combinations. - ECS-1P(T): TXF-110, HC-350 set - ECS-1P(KE): TXF-110, RXF-60K set - ECS-1P: TXF-110, HC-300 set ■Selectable Transmitters for Various Uses ● TXF-110 A pendant-type transmitter that is easy for the elderly to press even in emergencies. It has a waterproof structure suitable for daily life. ● TX-122 A pendant-type transmitter (not waterproof) that sends a signal by pressing both buttons on the sides simultaneously. ■Selectable Receivers for Various Uses ● HC-350 (Desktop Receiver) This desktop model can be used immediately by simply plugging the included AC adapter into an outlet. It allows you to choose from eight melodies or chimes and visually alerts you with a built-in flashlight. The alert duration can be selected from seven options ranging from 3 seconds to 120 seconds, including "continuous." The transmission range of the transmitter is approximately 100 meters in line of sight. ● RXF-60K (Portable Receiver) Compact and lightweight, rechargeable with a dedicated charger included. The radio frequency is already registered.
In case of emergency, simply press the transmitter to call the staff. The tabletop receiver will notify you with a flash and melody.
■Emergency Call Set The emergency call set features two types of transmitters and three types of receivers, offering six combinations. - ECS-1P(T): TXF-110, HC-350 set - ECS-1P(KE): TXF-110, RXF-60K set - ECS-1P: TXF-110, HC-300 set ■Selectable Transmitters for Various Uses ● TXF-110 A pendant-type transmitter that is easy for the elderly to press even in emergencies. It has a waterproof structure suitable for daily life. ● TX-122 A pendant-type transmitter (non-waterproof) that sends a signal by pressing both buttons on the sides simultaneously. ■Selectable Receivers for Various Uses ● HC-350 (Desktop Receiver) This desktop model can be used immediately by simply plugging the included AC adapter into an outlet. You can choose from eight melodies or chimes, and it visually alerts you with a built-in flashlight. The notification duration can be selected from seven options ranging from 3 seconds to 120 seconds, as well as a "continuous" option. The transmission range of the transmitter is approximately 100 meters in line of sight.
In case of an emergency in the bathroom, it can be called wirelessly. It comes with a cord approximately 1.7m long, allowing for installation at high locations.
■For emergency calls in the bathroom or toilet ■Pulling the transmitter's cord or pressing the transmitter's call button will activate the receiver, notifying you with a sound. ■Features ● The main unit, pull cord, and grip rubber are antibacterial. The pull cord is approximately 1.7m long, adjustable for length, and equipped with a safety feature (the joint will detach when a certain force is applied). ● Designed for use in bathrooms, toilets, and outdoors, it has a waterproof structure suitable for everyday life. ● Powered by two AA alkaline batteries, with a battery life of about 5 years when transmitting 10 times a day. ■Wireless, no wiring required ■Uses low-power radio waves, eliminating the need for wiring, and can be easily installed in various locations within the home, not just in the bathroom. ■Operation ● Pulling the cord or pressing the call button will cause the red light to flash, notifying receivers within 100m. ■Radio wave reach distance is approximately 100m in line of sight (between transmitter and receiver) ■The transmitter's radio wave reach distance is approximately 100m in line of sight. ■Extending radio wave reach distance ■By installing a relay unit (RTX-100), the radio waves can be relayed up to twice (for two units), extending the radio wave reach distance.
This is a set product consisting of the foot call transmitter "HCT-FC1" and the tabletop receiver "HC-350."
■Features ● Instead of the switches that have been casually pressed by hand, this can be used in medical and caregiving settings to protect against infections such as the coronavirus, as well as for staff calls, automatic door unlocking, and emergency button purposes. ● The switch section employs a seesaw-type pedal that detects pressure from either side. ● Comes with a "protective cover" to prevent accidental activation due to falling objects.
Direct reflection method using near-infrared beams. It is a sensor that is not affected by temperature changes. It is suitable for installation in hallways and similar areas.
■Features ● Ideal for detecting movement for life safety alert systems. ● Designed for wall mounting. ● The area beam can be adjusted up to 1 meter with a single unit. ● Can be installed to avoid detecting pets like dogs and cats, making it suitable for pet-friendly use. ● It is a type that does not produce mechanical noise, making it suitable for installation in hallways. *Always connect the motion sensor to the receiver using an AND connection.
In case of emergency! We will notify you if the usage time is long. A sensor that measures distance reduces malfunctions caused by changes in the floor surface.
■Overview ■When used, the toilet sensor detects and outputs signals. ■It detects whether there is movement or if it is stationary. ■If used for a preset time (e.g., 10 minutes) set in advance on the toilet life safety alert device "SAH-2(T)", it will notify you in advance for 5 minutes with a lamp or buzzer. If you do not exit the toilet or press the reset switch during this time, it will notify family members or the management office. ■Distance Measurement ■Seven beams independently measure the distance to the floor and automatically set the detection output height for each. ■It detects the height from the floor. ■Area Setting Changes for the Head ■The sensor head can be adjusted in four stages from 0° to 9°. The area settings can be erased or changed in height, allowing a total of 9 patterns to be selected, including the basic settings, for installation in the toilet. Three Types to Choose From There are two exposed types and one embedded type available, allowing you to select a sensor that fits the installation location. ●TS-7 (Exposed Round Type) Main installation locations: Low ceiling areas, facilities for specific users (private rooms) Features: Exposed type with a small volume and surface area, dome-shaped. However, it has many black window surfaces. ●TS-7U (Embedded Type) Main installation locations: Newly constructed facilities
If there are remaining individuals in the restroom of public or commercial facilities, it will be detected. It will notify of prolonged usage to prevent accidents or troubles in advance.
■ When the toilet is used, the toilet sensor detects it and outputs a signal. It detects whether someone is moving or stationary. If the toilet is used for a predetermined time (e.g., 10 minutes) set in advance on the toilet life safety notification device "SAH-2(T)," it will notify with a lamp or buzzer for 5 minutes beforehand. If the user does not exit the toilet or press the reset switch, it will notify family members or the management office. ■ Toilet-specific sensor Using unique technology, seven light axes independently recognize the distance from the floor to the toilet seat and automatically set the initial configuration. Of the seven, the central one and one behind it adjust the height of the area for the toilet seat and lid. ■ Notification of long-term use When connected to the toilet life safety notification device SAH-2(T), it will output a signal if the toilet is used for longer than the set time (usage detection: OFF, 5 seconds, 2, 3, 5, 7, 10, 12, 15, 20, 25, 30, 40, 50, 60, 90 minutes). Additionally, it has a system UP function that notifies in advance of the lamp or buzzer alert. ■ Installation locations It can be installed in public facilities such as department stores, supermarkets, train stations, libraries, art museums, museums, and schools.
Area Setting Remote Control TS-A
■Main Features ●The area setting remote control is specifically designed for the toilet sensor "TS-7 series." ●It can be used universally with all toilet sensors in the "TS-7 series." ●By pressing the buttons on the remote control, you can reset the area of the toilet sensor.
This is a sensor dedicated to the Living Safety Notification System, which adds a time function to the human movement sensor for enhanced living safety notifications!
■Life Safety Sensor This is a dedicated sensor for the 'Life Safety Notification System,' which integrates a "human movement sensor" with the time function of a "life safety notifier." It detects human movement through a passive sensor, and if no movement is detected within a pre-set timer duration, it alerts to a change in daily rhythm. The timer can be set to 15 different durations (20 seconds, 5 minutes, 1, 6, 8, 9, 10, 11, 12, 13, 15, 16, 18, 22, and 24 hours). ■Two Types: Ceiling-Mounted and Recessed It is installed on the ceiling surface of corridors and living rooms used in daily life. With an elegant design reminiscent of downlights, both the ceiling-mounted and recessed types do not compromise architectural beauty. ■User-Friendly Design To eliminate the relay operation sound during detection, a photoMOS relay has been adopted. This allows for a quiet living environment without worrying about the sensor's operational noise. The detection indicator light also uses a gentle green color that is easy on the eyes. ■Pre-Alert Function If no human movement is detected within the set time, a pre-alert output will occur 5 minutes prior. By connecting a buzzer or light, the system can be effectively utilized.
This is a sensor dedicated to the Living Safety Notification System, which adds a time function to the human motion sensor for enhanced living safety notifications!
■Living Safety Sensor This is a dedicated sensor for the 'Living Safety Notification System,' which integrates a "human movement sensor" with the time function of a "living safety notifier." It detects human movement using a passive sensor, and if no movement is detected within a pre-set timer, it alerts to an abnormality in the living rhythm. The timer can be set to 15 different durations (20 seconds, 5 minutes, 1, 6, 8, 9, 10, 11, 12, 13, 15, 16, 18, 22, 24 hours). ■Two Types: Ceiling-Mounted and Recessed It is installed on the ceiling surfaces of corridors and living spaces used in daily life. With a sophisticated design reminiscent of downlights, both the ceiling-mounted and recessed types do not compromise architectural beauty. ■User-Friendly Design To eliminate the relay operation sound during detection, a photoMOS relay has been adopted. This allows for a quiet living environment without worrying about the sensor's operational noise. The detection indicator light also uses a gentle green color that is easy on the eyes. ■Pre-Notification Function If no human movement is detected within the set time, a pre-notification output occurs 5 minutes in advance. By connecting a buzzer or light, the system can be effectively utilized.
This is a multifunctional display panel for the life safety notification system.
■Features 1. Channel display panel function (immediately notifies and outputs when there is a contact input) 2. Life safety notification function (notifies and outputs when the set time exceeds) 3. Life sensor display panel function (connects with sensors that have remote input functionality, and the ON/OFF for each channel is linked to the remote output. There is no individual output) Three functions are provided. ■Control each room with the main unit No need for an occupancy confirmation switch or card holder switch; control can be done with the main unit. ■Individual channel input You can operate the ON/OFF switch for each channel, allowing operation only in the necessary rooms when needed. ■Signal input displayed with chime and LED When a signal is input from connected devices, a chime sound and LED display will occur, allowing you to confirm the operational status of the connected devices visually and audibly.
This is a multifunctional display panel for the life safety notification system.
■Features 1. Channel display panel function (immediately notifies and outputs when there is a contact input) 2. Life safety notification function (notifies and outputs when the set time exceeds) 3. Life sensor display panel function (connects to sensors with remote input function, and ON/OFF for each channel is linked to remote output. There is no individual output) Three functions are provided. ■Control each room with the main unit No need for an occupancy confirmation switch or card holder switch; control can be done with the main unit. ■Individual channel input You can operate the ON/OFF switch for each channel, allowing operation only in the necessary rooms when needed. ■Signal input displayed with chime and LED When a signal is input from connected devices, a chime sound and LED display will indicate it, allowing you to confirm the operational status of the connected devices visually and audibly.
This is a 4-channel display board that notifies with a flash and melody (chime).
■ Signal input notification with flashlight and melody (chime) When a signal is received from the connected device, it will notify you with a flashlight and melody (chime). You can register alert sounds and set ON/OFF for each channel. ■ Output and display mode switching function You can switch between 'hold mode', which continuously outputs until the stop button on the main unit is pressed, and modes of 3 seconds, 6 seconds, 15 seconds, and 30 seconds, allowing for settings according to the system. ■ Chime and melody sounds selectable from various options There are 10 types of alert sounds, including melodies, which can be registered arbitrarily from 1CH to 4CH. The alert (red LED flashing) will sound in conjunction. It does not sound when the volume is OFF.
A display panel that shows the signal input of 5 systems with a melody (chime) and flash, capable of communicating with up to 4 locations.
■ Signal input is notified by flashlight and melody (chime). When a signal is input from the connected device, it will be indicated by the chime sound and LED, allowing you to confirm the operational status of the connected device visually and audibly. (a contact and b contact inputs can be selected) - Notification sound: Refer to the notification sound list (can be set for each channel). ■ 5-channel individual input Each channel is equipped with an ON/OFF switch, allowing operation only where and when needed. ■ LED display hold/non-hold The LED can display various indications based on settings. OFF: Off / Standby: Green light / Input: Red blinking In short-time mode, the LED can be set to hold or non-hold. ■ Output/display mode switching function You can switch between 'hold mode', which continuously outputs until the stop button on the main unit is pressed, and 'short-time mode' (3 seconds, 150 seconds, 30 seconds), allowing settings according to the system. ■ Check function When there is an input in the reset state, it will turn red in conjunction and allow for loop checking. (The same applies in the case of communication connection.)
Signal input from 10 systems is displayed with a melody (chime) and flash, and a display panel that can connect up to 4 locations.
■ Signal input is notified by flashlight and melody (chime). The channel display panel indicates the input signal from the connected device through chime sounds and LEDs, allowing for immediate confirmation of the operational status of the connected device. ● Alert sound: Refer to the list of alert sounds (configurable for each channel) ● LED display: OFF: off, standby: green light, input: red blinking ■ In short-time mode, the LED can be set to either hold or non-hold. ■ Output and display mode switching function You can switch between 'hold mode', which continuously outputs until the stop button on the main unit is pressed, and 'short-time mode' (3 seconds, 15 seconds, 30 seconds), allowing for settings according to the system. ■ 10-channel individual input Each channel is equipped with an ON/OFF switch, enabling operation of only the necessary channels when needed. ■ Remote input terminal Operation stops with a make input. The display for each channel and set/reset will turn off. ■ External power supply Provides external supply of DC 12V, 400mA when AC 100V is supplied.
Existing pole-mounted sensors can easily be converted to housing type.
■Compact Housing Type This is a compact housing type that is easy to install, allowing for simple attachment and excellent design aesthetics. ■Outstanding Security Due to its structure that conceals the interior, the position of the sensor's warning line and the types of sensors installed cannot be identified, providing excellent security. ■Easy Installation Installation is straightforward as it simply involves covering the pole (specific to KP-100/100B), making setup easy. ■Retrofit Installation on Existing Poles It is easy to retrofit onto existing pole installations. Additionally, it supports back-to-back installation of sensors. *For new installations, a pole is required. Beam direction: within 140°. ■Compatible Models - PXB-HFA series - PXB-F series - PXB-100SW - PXB-TE series - PB-TE series - PB-FZ series - PB-F series - PB-IN-HF series - PB-IN-100AT - BUS-XF series - BUS-XT series *Please use the included lock spacer when installing the sensor.
