Last Updated： Aggregation Period:May 27, 2026～Jun 23, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 27, 2026～Jun 23, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 27, 2026～Jun 23, 2026
This ranking is based on the number of page views on our site.
631～660 item / All 2944 items
It is a non-destructive testing device used worldwide for measuring ultrasonic pulse velocity.
Next-generation ultrasonic testing machine
This is a compact and lightweight penetration testing machine developed by the Civil Engineering Research Institute for slope investigation.
***Features*** - This method was devised at the Ministry of Construction's Civil Engineering Research Institute. It measures the relationship between the number of impacts of a weight and the amount of penetration, allowing for the determination of the relative bearing capacity strength of road subgrades and the bearing capacity values, similar to the purposes of CBR tests and plate load tests (N value (Nd value) is obtained). - Continuous data from the surface to the required depth can be obtained, eliminating concerns about underestimating the influence of the lower layers of the subgrade. - It is also used for inspection of restoration work after the completion of road gas and telephone line construction.
Investigation testing device for appropriately evaluating the properties of soft rock.
***Features*** The correlation diagram between the needle penetration gradient of the grip section [NP] (N/mm) and the uniaxial compressive strength (kN/m²) allows for immediate determination of the uniaxial compressive strength.
We will determine the ground reaction coefficient K value for the road. The dial gauge used to measure the settlement is a 4-point measurement type. It is a 10-ton oil jack system.
***Features*** - It is a four-point measurement type that measures the settlement amount at four locations on the loading plate. - The test jack is a 10-ton oil jack type.
JIS R 5201 compliant product.
This is a notice from Rex Co., Ltd. regarding the "Mortar Flow Tester C-206."
A DC signal generator that can simultaneously generate and measure.
In pressure tests and insulation resistance tests, issues such as incorrect test results due to disconnection or poor contact of test leads and the impact of fluctuations in test voltage caused by variations in power supply voltage have been pointed out.
It is designed to be user-friendly in both the field and the laboratory.
The Pundit Lab+ ultrasonic testing machine is equipped with the ability to display received waveforms, which can also be shown on a PC. In addition to propagation time, it can measure propagation speed, measurement length, and crack depth, with the ability to store up to 500 measured data points. 【Features】 ○ Direct display of received waveforms ○ Crack depth measurement mode (modified BS method) ○ Punditlink: Data download & received waveform display For more details, please contact us.
This seeks to determine the relationship between the dry density and moisture content when the soil is compacted.
The JIS Compaction Test Device S-171 complies with JIS A1210 and is used to determine the relationship between dry density and moisture content when soil is compacted. It is utilized in the design and management of compaction for constructing roads, embankments, and subgrades, as well as for managing optimal moisture content and compaction degree. Additionally, it serves as a means to produce soil specimens for CBR tests, unconfined compression tests, and more. 【Features】 ○ Complies with JIS A1210 ○ Can also be used as a means to produce soil specimens for CBR tests, unconfined compression tests, etc. For more details, please contact us.
From gas pressure control to hydraulic pressure control. A fully automatic in-house loading test device that does not use high-pressure gas.
The in-situ horizontal load test is a common field test used to understand the horizontal strength characteristics of the ground for pile design. Until now, the in-situ horizontal load testing equipment has been operated manually, leading to variations in testing accuracy due to individual differences. However, with automation, it will be possible to obtain test results with consistent accuracy. 【Features】 - Fully automated in-situ loading test equipment that does not use high-pressure gas - Lightweight and easy to handle due to the hydraulic system For more details, please contact us.
Measuring without variation in all directions, from soft materials to hard materials.
The Echo Chip 3 hardness testing machine is the most precise and functionally rich high-spec model in the Echo Chip series. It can be converted to various hardness scales such as HV, HB, HR, and HS. It can measure everything from soft materials to hard materials without any variation in all directions. 【Features】 ○ Can be converted to any hardness scale (HV, HB, HR, HS) ○ No personal error at all ○ User-defined conversion formulas can be programmed ○ Complies with ASTM and DIN standards For more details, please contact us or download the catalog.
Easily measure cross-sectional changes! Testing device for diagnosing the characteristics of cracks and other defects.
The Integrity Testing Device PIT-X can easily measure the tip position, cracks, and cross-sectional changes of various piles. It is a device that diagnoses the properties of piles, such as pile length, changes in pile cross-section, and cracks, by utilizing the phenomenon where elastic waves generated by striking the pile are reflected at boundaries with different impedances. 【Features】 ○ Latest compact model consisting of wireless sensors and a pocket PC ○ Compliant with the American technical standard ASTM D5882 Please contact us for more details.
The measurement time is extremely short! A simple bearing capacity testing machine that can be operated by one person.
"Elefoot" is a ground bearing capacity testing device that measures the support strength of surface soil using a simple method. By utilizing a person's body weight as a reaction force, there is no need for large equipment such as heavy machinery or power supplies. In addition to a short measurement time, it can be operated by a single person and is capable of measuring in confined spaces. 【Features】 - Extremely short measurement time, can be operated by one person - Capable of measuring ground bearing capacity in confined spaces - Lightweight for easy portability - Ideal for soil conditions with low viscosity, such as clay to sandy soils - Capable of measuring bearing capacities from 0 to 4375 kN/m² *For more details, please refer to the catalog or feel free to contact us.
Easy operation with a touchscreen! All-in-one hardness testing solution.
The "equotip550" is an ideal hardness testing machine for on-site testing of heavy large parts or assembled components. By exchanging the impact device, it accommodates a wide range of hardness scales. Furthermore, the compact portable model can be used in various locations, including on-site, in factories, and in laboratories, without restrictions on measurement locations. The use of icons makes touch screen operation even easier, and the user interface features a clear design for smooth operation. 【Features】 ■ High-resolution display ■ Comes with a cover to protect the monitor from scratches and dirt when not in use ■ Testing accuracy of ±0.8μm, with high precision and excellent reproducibility up to ±1.0HRC ■ Capable of incorporating unique conversion curves ■ Usable for thin parts, suitable for pipes and irregular materials For more details, please feel free to contact us.
Regular inspections for electrical equipment and tools to check for leakage and disconnections! Achieving convenience through regular maintenance.
It covers all the necessary measurements for testing equipment, such as insulation resistance measurement, leakage current measurement, load current measurement, voltage measurement, and leakage breaker tests, all in one device. It is a handy type with a simple operation method. The measurement results are easy to understand for beginners, with "green for pass and red for fail." *For more details, please check the catalog from the "PDF Download" below. You can also request a quote from "Contact Us." Feel free to reach out.
Supports refrigerant piping airtightness testing! Digital type full water tester.
It is active in the investigation of water supply and drainage, sewage piping, cold and warm water, and cooling water. It also supports the creation of reports through a dedicated app. *For more details, please check the catalog from the "PDF Download" below. You can also request a quote from "Contact Us." Feel free to reach out.
Measurements will be conducted using the sand cone method according to the standards of the Geotechnical Engineering Society.
We offer two types made from granular soil. They are used at construction sites such as dams and highways. *For more details, please refer to the catalog available for download below under "PDF Download." You can also request a quote from "Contact Us." Feel free to reach out.
Insulation withstand voltage tester compatible with both AC and DC.
Achieving a transformer capacity of 500VA, it supports a wide range of tests and test objects. It can be utilized for both insulation resistance tests and insulation resistance tests with this one unit. ★ For details, please check the product page from the link below【Related Links】. ★ You can also obtain the comprehensive catalog (electronic) from the "PDF Download" materials. ★ You can request a quote from "Contact Us." Please feel free to do so.
Developed using pressure vessel technology! This is the HAST, a high-acceleration lifetime testing device with a two-layer structure that boasts numerous advantages.
The "PC-R8/R8D series" is an unsaturated pressure cooker with a two-chamber structure consisting of an independent test chamber and a steam generation chamber. Compared to a single-chamber structure where both are installed in one chamber, the temperature influence between the test chamber (dry bulb) and the steam generation chamber (wet bulb) is minimized, achieving a wide range of usable humidity. Additionally, by using a round chamber that is efficient in terms of strength, the effective area is maximized and utilized. 【Features】 ■ Diverse screens and color LCD display ■ Two types of operating modes (programmed/constant value) ■ Door opening and closing with a single button operation ■ Excellent performance with a double-layer structure ■ Connection work is easy as the voltage application terminal is mounted on the inner surface of the door *For more details, please refer to the PDF document or feel free to contact us.
We will accept orders - Noise, strength, and durability testing of plastic gears.
Plastic gears are very important mechanical components in office equipment and automobiles. In recent years, the demands for improved equipment performance have become increasingly stringent, and significant efforts are required to reduce noise and enhance the durability of plastic gears, which are key components. It is theoretically difficult to achieve noise reduction and durability in gears, and reliable experimental data is highly valued, making the accumulation of more data increasingly important in the future. Therefore, our research institute has prepared various experimental facilities to accept themes from everyone and support data collection for reliability improvement.
It is a fully automatic tensile testing machine for rubber, equipped with a dedicated constant temperature chamber.
●If you set the test specimens on the tray, all processes from measuring the test specimens to chucking, measuring elongation between reference lines, removing the test specimens, and data processing will be performed automatically. ●Up to 300 test specimens can be tested continuously. This contributes to labor-saving, efficiency improvement, and enhanced reproducibility of measurement tasks. ●Compact space-saving design.
It is a universal testing machine with a maximum load capacity of 50 kN and 20 kN.
■We can also accommodate testing of engineering plastics. ■You can choose from a wide range of chucks (gripping tools) and jigs. ■It is possible to measure from tensile modulus* to elongation at break. (*Requires the optional high-precision extensometer.)
It is a tensile testing machine equipped with a 4-point suspension and a constant temperature chamber (temperature range 40°C to 150°C).
● Tensile tests can be conducted on materials with high elongation in temperature environments (40℃ to 150℃). ● Up to four test specimens can be tested simultaneously. ● Since the crosshead is installed inside the chamber, the stroke between the chucks can be larger within the constant temperature chamber compared to a combined machine that attaches a constant temperature chamber to a standard tensile testing machine or universal testing machine.
It is a testing machine that conducts tensile tests on plastic films automatically.
●If you set the test specimens on the tray, all processes from dimension measurement ⇒ chucking ⇒ elongation measurement between reference lines ⇒ removal of test specimens ⇒ data processing will be performed automatically. ●Up to 100 test specimens can be tested continuously. This contributes to labor-saving, efficiency improvement, and enhanced reproducibility in measurement tasks. ●Compact space-saving design.
If you set the test specimen on the tray, all processes from measuring the test specimen dimensions to chucking, measuring the elongation between reference lines, removing the test specimen, and data processing will be performed automatically.
● Up to 200 test specimens can be tested continuously, contributing to labor-saving and efficiency in measurement tasks. ● High-precision alignment tracking device (gauge for elongation between alignment lines) allows for accurate measurement from elastic modulus to fracture elongation. ● The internal mechanism for supplying test specimens automatically measures the width and thickness of the specimens. ● It is a compact, space-saving type. ● The specimen storage section uses a tray system for 40 specimens, making it easy to manage specimens and perform interrupted measurements (tray replacement during continuous testing).
A fully automatic Charpy impact testing machine that performs all processes automatically from setting the test specimen, measuring the test specimen dimensions, setting it on the support table, to measuring the impact value and data processing.
●Up to 300 test specimens can be tested continuously. It contributes to the labor-saving, efficiency improvement, and reproducibility enhancement of the Charpy impact test. ●Test specimen transport ⇒ Measurement of specimen thickness and notch depth ⇒ Setting on the sample stage ⇒ Automatic processing of measurement data.
This is a DuPont-style drop impact testing machine suitable for adhesion strength (peeling) tests due to coating impact, with a maximum drop height of 500mm.
There are also H-100 (drop height 1000mm) and H-200 (drop height 2000mm) for plastic sheets. *The photo shows the model H-100.
This is a friction testing machine that applies a constant friction load to test specimens such as woven fabrics, coatings, and cardboard, and evaluates the degree of wear through visual inspection and other methods.
●By attaching additional weights to the balanced arm, the test load can be up to 2000g. ●The number of reciprocations of the sample stage can be set to your desired count using the preset counter.
The evaluation is based on the wear reduction of the rubber test piece pressed against the surface of the sandpaper wrapped around the circumference of the rotating drum.
-
It is used to indicate the Rockwell hardness of materials such as plastic, measured by pressing a steel ball against the surface.
○Reference Standards: JIS B 7726, B 7730, K 7202-2, Z2245, ASTM E18, D 785, ISO 6508-1, -2, -3, 2039-2 ○Power Supply: AC100V, single phase, 2A (domestic), AC200–240V, single phase (overseas), 50/60Hz (selectable) ○Dimensions and Weight: W196×D487×H820 mm, approximately 82 kg ●For other functions and features, please refer to the catalog or contact us.
It is a testing machine that evaluates the hardness of a coating by pressing a pencil of known hardness against the coating film using the pencil hardness method.
Type NP is also compatible with the Clemens scratch hardness test for decorative panels.
