Testing Machine Product List and Ranking from 22 Manufacturers, Suppliers and Companies

121-AUTO Crisping Temperature Tester (Fully Automatic)

Complete automation of the testing process using robotic mechanisms! Capable of reaching -70°C using a freezer!

- This testing machine fully automates the process of low-temperature impact embrittlement testing (embrittlement temperature testing) using a robotic mechanism. - Low-temperature conditions are created using a refrigeration unit. - The embrittlement temperature testing machine applies impact bending to plastic and rubber materials under low-temperature conditions using a cantilever beam. - By setting the specimen attached to the specimen gripping device (specimen holder) in the cassette and simply inputting the test conditions on dedicated software on a PC, up to 40 tests can be conducted continuously. <Reference Standards> JIS-C3005, K6261, K6723, K7216, ASTM-D746, D2137, ISO-812, 974 [Regarding Catalog Download] Please request the catalog through the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

Company：安田精機製作所
Price：Other

Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

145-D Retention Force Testing Machine

Evaluate the holding power (slip resistance) of adhesive tape and adhesive sheets! There are also plenty of optional features!

- This is a testing machine used to evaluate the holding power (slip resistance) of adhesive tape and adhesive sheets. - The test specimen is attached to one end of the test plate so that a specified area is in contact, and then it is pressed with a roller. - Within one minute after pressing, the test plate is attached to the testing machine, and a specified load is applied to the end of the test specimen that hangs vertically. - The time until the test specimen completely falls off the test plate, or the distance the test specimen has slipped after a certain period, is measured. - Preheating time can be set. - Falling time can be measured. - Equipped with a timer for setting test duration. <Reference Standard> JIS-Z0237 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without a separate catalog, please request the comprehensive catalog.

Company：安田精機製作所
Price：Other

Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

151-H DIN Wear Testing Machine (with Constant Temperature Chamber)

Supports up to 100℃! Easy operation with a touch panel!

- This is a testing machine for wear of vulcanized rubber and thermoplastic rubber equipped with a constant temperature chamber. - It can accommodate temperatures up to 100°C. - It supports both Method A, which does not rotate the test specimen during wear, and Method B, which rotates the test specimen. - It is equipped with a touch panel, making it easy to operate the tests and calculate test results. <Reference Standards> JIS-K6264-2, ISO-4649, DIN-53 516 [Regarding Catalog Download] Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

Company：安田精機製作所
Price：Other

Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

152 Akron Rubber Wear Testing Machine

This is an Akron abrasion testing machine for evaluating the wear resistance of vulcanized rubber and thermoplastic rubber.

- This is a testing machine for evaluating the wear resistance of vulcanized rubber and thermoplastic rubber. - The circumferential surface of a rotating disc-shaped test piece is pressed against the circumferential surface of a grinding wheel under a constant load, with a fixed angle of inclination applied to the rotating axis to induce wear, and the wear mass is measured. - It is mainly used for tires, shoe soles, and similar applications. <Reference Standards> JIS-K6264-2, ISO-4649 【About Catalog Download】 Please request the catalog through the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

Company：安田精機製作所
Price：Other

Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

183 Drop Ball Impact Testing Machine

It is a testing machine (drop ball tester, drop ball impact tester) used to evaluate the impact resistance of rigid plastics, coatings, and other materials.

- This is a testing machine (drop ball tester, drop impact tester) used to evaluate the impact resistance of coatings and similar materials. - A specified weight (striker) held by a magnet holder (or air holder) is dropped from a predetermined height onto the test specimen, and the failure condition of the specimen (cracking, peeling) is observed. <Reference Standards> JIS-(K5400), K5600-5-3, (K6718), (K6745), K7211, ISO-6272 【About Catalog Download】 Please request the catalog through the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

Company：安田精機製作所
Price：Other

Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

185 Heating Deformation Testing Machine

This is a testing machine that calculates the reduction rate of rubber and plastic insulated wires based on the thickness of the test specimens before and after heating.

- This is a testing machine (heating deformation testing machine) for conducting heating deformation tests on rubber and plastic insulated wires. - The thickness of the test specimen is measured, and it is placed in a test device heated to a specified temperature for a specified time. - Next, the test specimen is placed between parallel plates, subjected to a specified load, and further heated, after which its thickness is measured in that state. - The reduction rate (heating deformation rate) is calculated from the thickness of the test specimen before and after heating. - The temperature can be set up to a maximum of 200°C. <Reference Standards> JIS-C3005, C3307, K6723, ASTM-D621 【Regarding Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

Company：安田精機製作所
Price：Other

Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

199 Insulation Breakdown Voltage Test Machine [for Insulating Films and Enamel Wires]

It is a testing machine (insulation resistance tester, dielectric strength tester) for evaluating the insulation strength of solid electrical insulating materials, including the insulation film between the positive and negative electrodes of lithium-ion batteries!

- This is a testing machine for evaluating the insulation strength of solid electrical insulating materials (insulation strength testing machine, dielectric strength testing machine). - By changing the electrodes, it can accommodate test specimens such as plates, sheets, fabrics, films, tapes, tubes, varnishes, and coatings. - Recently, it has also been used for the insulation films between the positive and negative electrodes inside lithium-ion batteries. - Even if the test specimen is enameled wire, by changing the electrodes, insulation breakdown tests can be conducted using the metal foil method or the two-electrode method. - It supports both continuous voltage increase method and step voltage increase method. - It is also compatible with guarantee tests and dielectric strength tests. <Reference Standards> JIS-C2110, (C3003), C3216-5, IEC-60851-5 【Regarding Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without a standalone catalog, please request the comprehensive catalog.

Company：安田精機製作所
Price：5 million yen-10 million yen

Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

210 Magnet Wire Wear Testing Machine

It is a testing machine (wear testing machine) for evaluating the wear resistance of enamel wire using the blade reciprocating method.

- This is a testing machine (wear testing machine) for evaluating the wear resistance of enamel wire using the blade reciprocating method. - Attach the test specimen, remove the insulation coating from one end, and connect the test specimen conduction cable. - Lower the blade onto the test specimen, apply a specified load, and move the blade back and forth to wear down the insulation coating of the test specimen. - Measure the number of cycles until conduction occurs, which will determine the wear resistance. - By rotating the test specimen, measurements can be taken three or four times with the same specimen. <Reference Standards> NEMA-C9.5, JASO, ISO-6722 [Regarding Catalog Download] Please request the catalog through the related links below or by contacting us. *For products without a single item catalog, please request the comprehensive catalog.

Company：安田精機製作所
Price：Other

Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

260 Form Rubber Repeated Compression Testing Machine

A repeated compression residual strain test will be conducted on soft foamed materials such as polyurethane foam and latex foam using Method B (constant displacement method).

- This is a testing machine (repeated compression testing machine, polyurethane foam repeated compression testing machine, foam rubber repeated load compression testing machine) that conducts repeated compression residual strain tests on soft foamed materials such as polyurethane foam and latex foam using Method B (constant displacement method). - After measuring the thickness of the test specimen, it is placed between parallel plates and compressed to 50% of its original thickness at a rate of 60 times per minute, and this is repeated continuously for 80,000 cycles. - After that, the test specimen is removed and left for 30 minutes under specified conditions, and the thickness of the specimen is measured again. - The thickness reduction rate is calculated from the thickness before and after the test, which is then defined as the repeated compression residual strain. <Reference Standards> JIS-(K6382), K6400-4 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products that do not have a standalone catalog, please request the comprehensive catalog.

Company：安田精機製作所
Price：Other

Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

306 FPC Buckling Test Machine

We evaluate the bend resistance of plastic films and FPC (Flexible Printed Circuit Boards, Flexible Printed Boards).

- This is a testing machine (bending resistance testing machine, flexible printed circuit board bending fatigue testing machine) used to evaluate the bending resistance of plastic films and FPCs (flexible printed circuit boards). - The test specimen is bent to the specified bending radius as defined in individual standards and fixed between a parallel fixed plate and a movable plate while current is passed through the specimen to prepare for the test. - The movable plate is moved back and forth at a specified speed to bend the test specimen, continuing until the current flowing through the specimen stops, and the number of bends up to that point is recorded. - We also offer the model [306-L type] for testing in a low-temperature chamber. <Reference Standard> JIS-C5016 <Regarding Catalog Download> Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

Company：安田精機製作所
Price：Other

Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

101-HS Taper Type Ablation Tester with Simple Suction Airflow Measurement

With a simple airflow measurement feature, more accurate testing is possible! This is a Taber wear testing machine.

- This is a testing machine equipped with a suction airflow measuring device for the No. 101-H Taber Abrasion Tester. It not only sucks up the wear particles generated during the wear test but also measures the suction airflow, allowing for more accurate test results. - It is a Taber abrasion testing machine (Taber type ablator) that evaluates the wear resistance of flat materials using wear wheels. - A pair of wear wheels is pressed against a rotating test piece with a constant load to cause wear, and the wear mass, wear volume, thickness, optical changes, etc., are measured. - Tests can be conducted on a wide range of materials including plastics, rubber, construction materials, decorative panels, leather, paper, woven fabrics, and coatings. <Reference Standards> JIS-A1453, (K5400), K5600-5-8/9, K5665, K6264-2, K6404-4, K6902, K7204, (L1018), L1085, L1096, ASTM-D1044, TAPPI-T476, JAS, (JASO-M403), ISO-4649, 5470-1, 7784-1/2, 9352 【About Catalog Download】 Please request the catalog from the related links below or contact us. *For products without individual catalogs, please request the comprehensive catalog.

Company：安田精機製作所
Price：Other

Contract measurement

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

226 Handle-O-Meter (Tactile Measurement Device)

The handle-o-meter method is used to evaluate the stiffness and softness of paper, plastic films, and textiles.

- The handle meter method evaluates the rigidity and softness of paper, plastic film, and textiles. - A test specimen is placed on a sample table with a slot of specified width, and it is pressed down from above with a blade (pressure plate). - The resistance force experienced at that time is measured, and the rigidity-softness is calculated from the combined values of bending and sliding. <Reference Standards> JIS-L1096, TAPPI-(T498), J.TAPPI-No.34 [Regarding Catalog Download] Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

Company：安田精機製作所
Price：Other

Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Small Flexographic Printing Test Machine FC11

Desktop type with high performance

It's a tabletop type with a professional specification! The printer has capabilities equivalent to mass production machines and is a low-cost printing machine, so you will definitely be satisfied. ★Features★ - Tabletop type, easy to move. - Pressure adjustment is possible. - Printing speed and roll rotation speed are all adjustable.

Company：エムティーテック
Price：Other

Other physicochemical equipment
Hydrogen battery

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Testing Machine Product List and Ranking from 22 Manufacturers, Suppliers and Companies

Testing Machine Manufacturer, Suppliers and Company Rankings

Testing Machine Product ranking