Transmitter Product List and Ranking from 53 Manufacturers, Suppliers and Companies | IPROS GMS

Absolute Humidity/Temperature Transmitter / HD3817T Series

● The HD3817T is an absolute humidity and temperature transmitter with a 4-20mA output, while the HD38V17T has a DC0-10V output. ● Absolute humidity is the ratio of the amount of water vapor to the volume of air, expressed in units of g/m³. ● The maximum operating temperature of the sensor is up to 200℃. This feature makes it suitable for harsh industrial applications where conventional capacitive sensors cannot be used. ● Fast response time and quick recovery time from saturation are also characteristics of this sensor. ● The maximum measurement range is absolute humidity from 0 to 130g/m³ and temperature from 0 to 200℃. ▲ Maximum operating temperature of the sensor is 200℃, allowing for high-temperature measurements. ▲ Fast response time and recovery time from saturation. ▲ 4-20mA output or 0-10V output. ▲ Probe stem lengths of 127mm/227mm and cable lengths of 2m/5m.

Precision Pressure Transmitter / HD9408.3B Series

A barometric transmitter characterized by outstanding accuracy and stability provided by a temperature-compensated piezoelectric pressure sensor.

● Barometric transmitter using a high-precision piezoelectric pressure sensor with temperature compensation ● Extremely high accuracy and long-term stability, low hysteresis, excellent reproducibility of temperature characteristics ● Measures atmospheric pressure in the range of 500 to 1200 hPa for analog output and 0 to 1350 hPa for digital output ● Achieves outstanding performance by adopting a silicon-type piezoelectric pressure sensor that integrates both temperature-sensitive elements ● The pressure and temperature measured by the sensor are processed into output signals that are corrected across a very wide operating temperature range of -40 to +85°C by a microcontroller ● Factory calibrated at multiple temperature points within the operating temperature range before shipment ● Suitable for remote data acquisition, such as solar-powered automatic weather stations, due to low power consumption design ● Waterproof housing with protection grade IP67 ▲ Rich output options: Analog current/voltage output, RS232C/RS422/RS485/SDI-12 digital output ▲ Wide operating temperature range of -40 to +85°C, accuracy ±0.1 hPa ▲ Standard protocols: Modbus-RTU, NMEA0183, SDI-12

Domestic explosion-proof certification obtained for electrochemical oxygen transmitter oxy.IQ.

【Domestic Explosion-Proof (TIIS) Certification Obtained!】2-Wire Loop Powered Galvanic Battery-Powered Compact Oxygen Transmitter

oxy.IQ is a compact oxygen transmitter powered by a 2-wire loop, introduced as the successor to the O2X1 model. It features an evolved user interface, sensor self-diagnosis (including sensor lifespan and raw signal), improved temperature compensation, and other functions that enable more accurate oxygen measurement. The oxygen sensor is cartridge-type (for PPM/% use, each for general gas/acidic gas) and can be easily replaced. 【Features】 ○ 2-wire loop powered 4 to 20 mA transmitter ○ Display with keypad ○ Option for intrinsic safety explosion-proof (application in progress) ○ Proven galvanic battery O2 sensor technology ○ User-selectable ppm and % oxygen concentration ranges *For more details, please refer to the PDF document or feel free to contact us. Please note that personal information registered with Ipros may be shared with our authorized distributors for communication purposes. Thank you for your understanding.

Druck PTX3000 Pressure Transmitter for Aircraft Installation

Pressure transmitter for aircraft installation

This is a high-precision/high-reliability pressure transmitter that has obtained approval for aviation standards such as FAA and CAA (compliant with MIL-HDBK-217F Notice 2, below 10 fpmh). It features a robust structure, a wide operating temperature range, and added EMI/lightning protection, making it suitable for use in harsh environments. It is also effective for space-saving in harnesses. *For more details, please download the catalog or contact us. Please note that the personal information registered with Ipros may be shared with our authorized distributors, and they may contact you. Thank you for your understanding.

Capacitive Moisture Meter Transmitter MMY31

Measure the dew point or ppm in the gas at line pressure or atmospheric pressure.

2-wire loop type capacitance moisture meter with 4-20mA output. ◆ Specifically designed to measure dew point or ppm in gas at line pressure or atmospheric pressure. ◆ The flat aluminum oxide sensor offers excellent corrosion resistance, long-term stability, rapid response time, and outstanding temperature characteristics. ◆ Features an integrated flow cell with filter and flow adjustment function, making it ideal for monitoring moisture concentration in various process environments. *For more details, please refer to the documentation or feel free to contact us. Please note that personal information registered with Ipros may be shared and communicated with our authorized distributors. Thank you for your understanding.

Capacitive Humidity Transmitter MMR30

2-wire loop type capacitive humidity sensor

The body is robust and can be directly connected to the process. By attaching an optional display, it is possible to check the indicated values in the field. *For more details, please refer to the documentation or feel free to contact us. Please note that personal information registered with Ipros may be shared with and contacted by our authorized distributors. Thank you for your understanding.

Capacitive Humidity Transmitter MMR31

2-wire loop type capacitive hygrometer

The body is robust and can be directly connected to the process. By installing an optional display, it is possible to check the indicated values in the field. *For more details, please refer to the documentation or feel free to contact us. Please note that personal information registered with Ipros may be shared and communicated with our authorized dealers. Thank you for your understanding.

Heat conduction rate gas concentration meter transmitter XMTCpro

XMTCpro Next Generation Thermal Conductivity Gas Concentration Meter Transmitter

XMTCpro is a compact and robust analytical device compliant with SIL 2, capable of continuously measuring the concentrations of various gas components such as hydrogen, carbon dioxide, methane, and helium in binary mixed gases. It features an integrated display and an intuitive user interface.

2-wire pressure transmitter 'SU71'

No encapsulating liquid or heat dissipation fins! Achieves a structure that does not require zero point adjustment during clamp tightening.

The "SU71" is a two-wire pressure transmitter that achieves a "liquid-free" structure without using filling liquid for pressure transmission. Thanks to the capacitive pressure sensor, it is less affected by "strain" during clamping, eliminating the need for zero point adjustment after installation. It features an ideal safe and secure structure suitable for pharmaceutical, food, and cosmetic manufacturing processes. 【Features】 ■ Safe and secure structure without filling liquid ■ All stainless steel case for safety and security ■ Compatible with low pressure range starting from 20 kPa ■ Output accuracy: ±0.5% F.S. ■ Can withstand up to 150°C without heat dissipation fins *For more details, please refer to the PDF document or feel free to contact us.

Pressure transmitter "ZT11"

Achieving compactness and lightweight design! A pressure transmitter for the semiconductor industry with excellent corrosion resistance and airtightness.

The "ZT11" is a pressure transmitter for the semiconductor industry that uses a vapor-deposited semiconductor strain gauge detection unit and built-in electronic circuits to convert pressure into electrical signals for transmission. By welding a highly corrosion-resistant pressure sensor made of SUS316L, it excels in corrosion resistance, airtightness, long-term stability, and reliability. Compared to previous pressure transmitters, it achieves a compact and lightweight design (compared to our products), with EP and GP grades as standard, and also offers UC grade as an option. 【Features】 ■ Achieves compact and lightweight design ■ Welded high corrosion-resistant pressure sensor made of SUS316L ■ Co-Ni alloy available as an optional feature (UC grade) ■ IP67 dustproof/waterproof rating *For more details, please refer to the PDF materials or feel free to contact us.

Pressure transmitter "GC51"

Absolute pressure, low pressure to medium pressure to high pressure! Pressure transmitters compatible with various pressure ranges.

The "GC51" is a two-wire pressure transmitter equipped with scaling functionality, allowing for adjustments to the display and output range. The display section features an LCD with LED backlighting, enhancing visibility in dark environments. It can be installed outdoors and is suitable for a wide range of industry applications, including building air conditioning processes, factory equipment, environmental processes, and water treatment processes, contributing to labor-saving in installation work. 【Features】 ■ Equipped with scaling functionality for adjusting the display and output range ■ The display section uses LED backlighting for improved visibility in dark environments ■ Compact and lightweight size ■ Direct connection type allows for installation in four directions: up, down, left, and right *For more details, please refer to the PDF document or feel free to contact us.

Optical Multi-Format Transmitter

Ideal for generating advanced modulation formats and measuring optical communication!

The optical multi-format transmitter supports modulation formats such as OOK, DPSK, QPSK, and 16-QAM. It is used for generating advanced modulation formats and measuring optical communication. 【Features】 ■ Analog bandwidth: 18GHz (typ) ■ RF input channels: up to 4 ■ C-band/L-band *For more details, please download the catalog or contact us. *The catalog is available in English.

GTH03 Indoor/CO2/Temperature and Humidity Transmitter

Easy-to-read LCD display integrated temperature and humidity sensor.

■Features - Easy-to-read LCD display. - Non-dispersive infrared sensor (NDIR) - Analog output; Relay/RS485 - Integrated temperature and humidity sensor/CMOS

Duct-mounted CO2 transmitter EE850

Transmitter capable of measuring relative humidity (RH) and temperature (T) with a duct-insertable CO2 meter, featuring a 5-year accuracy guarantee (no calibration required for 5 years).

● No calibration required for 5 years ● The detection principle recommended by the Ministry of Economy, Trade and Industry is an optical sensor ● Long-term stability achieved through automatic CO2 calibration function ● Temperature compensation function ● Excellent resistance to contamination ● Installation in hard-to-maintain locations such as high places ● No calibration required for 5 years ■ The EE850 is a CO2 concentration measuring device suitable for applications such as ventilation systems and building automation. ■ To compensate for aging degradation, it employs E+E's unique dual-wavelength non-dispersive infrared (NDIR) CO2 sensor, which is resistant to contamination and provides stable long-term measurements. ■ The humidity detection component is protected from dust, dirt, and corrosion by E+E's unique sensor coating. ■ In addition to measuring carbon dioxide, relative humidity, and temperature data, the dew point calculated through temperature and humidity conversion can be output via analog output (voltage/current selectable), and a passive temperature sensor with a two-wire connection can also be selected as an additional option. For more details, please download the catalog or contact us.

Wall-mounted CO2 transmitter EE800 for HVAC (air conditioning) use

【CO2 sensor with a 5-year accuracy guarantee (no calibration needed for 5 years)】In addition to measuring CO2 concentration, it can also measure temperature and relative humidity, and convert to dew point temperature!

● The detection principle recommended by the Ministry of Economy, Trade and Industry is an optical sensor. ● Equipped with CO2 automatic calibration function (automatic correction function). ● Choice of Modbus, BACnet, or analog output. ● Revolutionary long-term stability. ● Temperature compensation function. ● Easy installation with a snap-on type housing. ■ The EE800 is a CO2 measuring device that also measures temperature and relative humidity, and can convert units to dew point temperature. To compensate for aging degradation, E+E's unique dual-wavelength NDIR CO2 sensor is used, and CO2 and temperature are calibrated at multiple points during manufacturing, allowing for accurate CO2 measurement across the entire temperature range. ■ You can choose between analog output or RS485 output. With Modbus RTU or BACnet MS/TP interface, output in other units such as absolute humidity, mixing ratio, enthalpy, frost point, and water vapor partial pressure is possible. For more details, please download the catalog or contact us.

Probe exchange type temperature and humidity transmitter EE220

[For Medical Use] No need to remove the device. Ideal temperature and humidity transmitter for on-site calibration.

● Temperature and humidity transmitter suitable for calibration in the pharmaceutical field ● Probe can be detached from the housing ● Housing material can be selected from polycarbonate/metal ● Wall-mounted/rail-mounted (DIN EN 50022) ■ The EE220 is a temperature and humidity transmitter with a detachable housing and probe. ■ In the FDA (Food and Drug Administration) regulatory field, on-site calibration may be required, and the EE220 can accommodate this with two types of probes. By using an extension cable, the EE07 probe can be connected to the calibrator without removing it from the EE220 main unit.

High Humidity and Harsh Environment Temperature and Humidity Dew Point Transmitter HTS801

[EE33 successor model] The highest model in the series! Highly reliable and stable measurements can be achieved even in environments contaminated by high humidity or chemicals, as well as when condensation and chemical substances are present!

● In high humidity and chemically contaminated environments ● Quickly recovers even during condensation ● Detection using monolithic polymer cells ● Operating range -80 to +180℃, maximum pressure resistance 30MPa ● Digital output available (RS485) The HTS801 temperature and humidity dew point transmitter for high humidity and harsh environments is the successor to the EE33. It can measure relative humidity, dew point, absolute humidity, and more with high responsiveness and reliability under the most severe conditions. For more details, please download the catalog or contact us.

Explosion-proof dew point transmitter SDT-EX

This is a three-wire dew point transmitter developed for measuring dew points in explosion hazard areas!

●Certified for intrinsic safety explosion-proof according to ATEX and IECEx standards ATEX: II 1 GD Ex ia IIC T4 Ga (-20 °C ≤ Ta ≤ +60 °C) IECEx: Ex ia IIIC T200135°C Da (-20 °C ≤ Ta ≤ +60 °C) ●Common GND 3-wire type, power supply 7-28 VDC ●Linear output of dew point (analog 4-20 mA) ■The UK company SHAW's SDT-Ex explosion-proof transmitter is a 3-wire dew point transmitter developed for measuring dew points in explosive hazardous areas. It has obtained explosion-proof certification with European certification (ATEX) and international certification (IECEx). ■The SDT-Ex is powered by a voltage of 7 to 28 VDC and is configured to output an insulated linear 4-20 mA signal over a distance of up to 1,000 meters (3,280 feet). ■It covers the entire range of dew points from -100 °Cdp to +20 °Cdp and can measure across various dew point ranges. ■Housed in a robust enclosure, it complies with the dust and water protection standard IP66.

Temperature and Humidity Transmitter HTP201

A compact temperature and humidity transmitter that excels in cost-effectiveness and demonstrates high precision and reliability in temperature and humidity measurement.

● Outstanding measurement performance with patented sensor technology ● Excellent long-term performance even in dusty or dirty environments ● Analog output selectable as voltage or current ● Wide temperature range -40 to +80°C ● Self-heating function ■ The HTP201 boasts excellent performance and is ideal for cost reduction and reliable measurement of relative humidity and temperature across various industrial sectors. For more details, please download the catalog or contact us.

Wall-mounted Temperature and Humidity Transmitter HTS201

[EE10 successor model] Designed for residential and commercial air conditioning. A hygrometer designed for measuring relative humidity (RH) and temperature (T).

● For measuring relative humidity (RH) and temperature (T) ● Selectable output (Analog/Modbus/BACnet) ● Electrical equipment housed in the surface cover ● Outstanding measurement performance with patented sensor technology ■ The HTS201 is an indoor thermometer and hygrometer designed for accurate measurement of relative humidity (RH) and temperature (T) in residential and commercial air conditioning. There is also a version that outputs humidity as an analog signal and temperature as a resistance output. The measured values that support analog output can also be displayed on an optional display. For more details, please download the catalog or contact us.

Wall-mounted temperature transmitter EE451

Building management systems and HVAC (air conditioning systems) can accurately measure indoor and outdoor temperatures!

● Temperature (T) measurement use ● Output selection available (Analog/Modbus/BACnet) ● Compact design ■ The EE451 features voltage or current output, RS485 communication with Modbus RTU or BACnet MS/TP protocol. Additionally, you can choose a sensor element for passive temperature measurement. An optional display is available with analog output. The compact and robust housing allows for unbiased measurement of ambient temperature. Easy setup and adjustment are possible with optional adapters and free product configuration software.

Dew Point Transmitter

It is an ideal dew point meter that can be used in a harsh industrial environment!

This device is a dew point transmitter that uses the latest dewSMART sensor with built-in electronic circuits. Housed in a robust stainless steel body and designed to IP65 standards, it is an ideal instrument for use in harsh industrial environments. The digital dewSMART technology enables accurate and reliable dew point management.

Strain gauge replacement type differential pressure transmitter ~P300

Strain gauge replacement type differential pressure transmitter

The P300 D/A pressure transducer is designed to accommodate equipment configurations that require a low pressure range, which cannot typically be measured with a strain gauge transducer.

Pressure transmitter KPT series

It is a pressure transmitter with a built-in amplifier using a piezo pressure sensor.

This product is an amplifier-integrated pressure transmitter/transducer that uses a piezo pressure sensor. It features a double diaphragm structure, and all materials, including the fittings, are made of stainless steel. The fittings and diaphragm are laser-welded, providing excellent durability. Additionally, the amplifier section uses an ASIC for temperature compensation, ensuring high accuracy and stability. For more details, please contact us or refer to the catalog.

Pressure transmitter

High-precision sensor with excellent temperature characteristics.

This is a pressure sensor manufactured by Pureon Japan Co., used in semiconductor manufacturing gas lines and other applications. The PC-300 series is a high-precision sensor with excellent temperature characteristics, and it features outstanding corrosion resistance by using SUS316L double melt material in the gas (liquid) contact part.