We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Tray.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Tray×MAPPREND. - List of Manufacturers, Suppliers, Companies and Products

Tray Product List

1～9 item / All 9 items

Displayed results
Vacuum-formed tray, conductive tray

Vacuum-formed tray, conductive tray

~For customers who want to prevent adhesion of dust and electrostatic damage~

Conductive trays that allow electricity to flow easily are perfect for customers who want to prevent dust adhesion and electrostatic damage. The lower the surface resistance value, the easier it is for electricity to flow, making it less likely to become charged, thus preventing dust adhesion and electrostatic damage. **About MAPPREND's Conductive Trays** 1. Prevents contamination from dust during tray production - Clean room: Compatible with class 2,000 to 10,000 - Air blow compatible - Clean packaging 2. Protects from dust during transportation If there is any play between the tray and the product during transportation, the tray may wear down, generating dust. Our company prevents wear through design and molding technology. Minimizing play is crucial, especially at the regulated and restrained areas of the product. However, vacuum molding has limitations on fine molding and does not allow for complete freedom in shaping. Our design technology and molding techniques during production also accommodate wear-resistant trays. Additionally, it is possible to protect against wear from the material side using wear-resistant sheets.

  • tray
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Vacuum-formed tray, wear-resistant tray

Vacuum-formed tray, wear-resistant tray

To customers troubled by debris caused by tray wear.

Trays implement anti-scraping measures depending on the products being packaged. This is because there are cases where the tray may wear slightly at the contact points with the product, generating fine debris. Special care is needed when packaging products that have high surface hardness and sharp edges against plastic trays. **Features of MAPPREND's Wear-Resistant Trays** 1. Trays that protect against scraping One of the anti-scraping measures involves design modifications. Therefore, the regulated and restrained areas of the product are very important. However, vacuum forming has limitations in fine molding and does not allow for complete freedom in shaping. Our design technology and molding techniques during production can accommodate wear-resistant trays. 2. Material selection suitable for anti-scraping trays One of the anti-scraping measures involves selecting the materials used for the trays. We will select and propose the most suitable materials from various sheets of PET, PS, and PP for your products. Additionally, by using wear-resistant trays with surface treatment, it is possible to further enhance wear resistance. We will select the optimal materials according to your specifications and provide our proposals.

  • tray
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Vacuum-formed tray, substrate tray

Vacuum-formed tray, substrate tray

~To customers looking for substrate trays~

**Features of MAPPREND's PCB Trays** 1. Tray that Protects PCBs Although referred to as PCB trays, we offer both horizontal and vertical trays that can be used with a lid. In both types of trays, the areas that support the PCB are extremely important. However, vacuum forming has limitations in fine shaping and does not allow for complete freedom in molding. Our design technology and molding techniques during production enable us to accommodate trays with high difficulty levels. 2. Trays Suitable for Picking Stacked Trays The work processes for PCBs have been increasingly automated. Many trays used in automated equipment are designed to be stacked in the same direction due to the structure of the equipment. Therefore, the trays require ease of separation when stacked and precise pitch for stacking height. Additionally, if the strength is insufficient, they will not be picked, making the selection of appropriate material thickness crucial. We propose optimal trays that match the ease of separation and the picking methods of our customers' equipment.

  • tray
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Vacuum-formed tray, lead frame tray

Vacuum-formed tray, lead frame tray

~To customers looking for lead frame trays~

**Features of Trays for Lead Frames** 1. **Optimized Tray for Quantity** By maximizing the number of products per tray, we can reduce the unit cost of the tray for the products. Our design takes into account the utmost safety of the products, allowing for an increased quantity while still protecting them. We will propose trays with the maximum quantity tailored to your specifications. 2. **Trays that Protect from Contamination** Lead frames need protection from contamination. By using highly conductive materials, we can reduce the adhesion of contaminants during transportation. The effectiveness in preventing contamination is ranked as follows: conductive > permanent static prevention > static prevention > normal. Additionally, we can manufacture in clean rooms and clean booths. We will create trays using the optimal materials and production environment according to your product specifications.

  • tray
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Vacuum formed tray

Vacuum formed tray

Put an end to your troubles with vacuum-formed trays!

We are MAPPREND, specializing in the manufacturing of vacuum-formed trays and mold production. We offer planning and design for trays that protect electronic components during transport from scratches and impacts, as well as trays for cosmetic containers. We have factories in Saitama, Shiga, Yamagata, and Kagoshima in Japan, and in China, Malaysia, and Vietnam overseas. We propose vacuum-formed trays tailored to our customers' needs.

  • tray
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Vacuum-formed tray FPC tray

Vacuum-formed tray FPC tray

~To customers looking for FPC trays~

**Features of MAPPREND's Trays for FPC** 1. Optimized Tray for Quantity FPC has a high degree of freedom and flexible shapes, so the number of products per tray can vary significantly depending on the arrangement method. By maximizing the quantity, we can reduce the unit cost of the tray for the products. Our company considers various arrangement methods and proposes optimized quantities. 2. Trays Suitable for Transportation FPC is lightweight and easily deformable, which can cause products to pop out of the tray due to impact during transportation. Our company proposes the optimal tray shape considering the characteristics of the products. Additionally, we implement improvements for work efficiency, such as picking, not just for transportation. We provide trays for FPC with reliable planning and design capabilities that meet your needs.

  • tray
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Vacuum-formed tray Lens tray

Vacuum-formed tray Lens tray

~To customers looking for lens trays~

**Features of MAPPREND Lens Trays** 1. Lens trays that protect optical lenses Optical lenses need to be protected from scratches. To achieve this, it is necessary to design the contact points between the optical lenses and the tray. One method of product protection is to use a tray with a body and lid set. Even when using the set, we will produce lens pack trays that can be efficiently stacked, not just for protection. 2. Trays that protect from dust Optical lenses need to be protected from dust. By using highly conductive materials, it is possible to reduce the adhesion of dust during transportation. The lower the surface resistance value, the easier it is for electricity to flow, making it less likely to become charged, thus effectively preventing dust adhesion. Additionally, our company is capable of manufacturing in clean rooms and clean booths. We will produce lens trays using the optimal materials and production environments tailored to your product specifications.

  • tray
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tray for electronic components

Tray for electronic components

Put an end to your troubles with vacuum-formed trays!

We are MAPPREND, specializing in the manufacturing of vacuum-formed trays and mold production. We offer planning and design for trays that protect electronic components during transport from scratches and impacts, as well as trays for cosmetic containers. We have factories in Saitama, Shiga, Yamagata, and Kagoshima in Japan, and in China, Malaysia, and Vietnam overseas. We propose vacuum-formed trays tailored to our customers' needs.

  • tray
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cosmetic tray

Cosmetic tray

We propose products that enhance the attractiveness of goods and products that prevent interference between containers, protecting their appearance from scratches.

At MAPPREND Co., Ltd., we handle "trays" for cosmetics. We prioritize our customers' products and design products that make the container's logo and product name stand out more. We propose shapes that prevent items from protruding and interfering with each other, and we select suitable materials from a wide variety to protect valuable products from damage. Additionally, we will confirm the packaging dimensions and specifications that our customers typically use and provide suitable proposals considering improved loading efficiency. 【Features】 ■ Make products attractive ■ Design products that prioritize our customers' products and make the container's logo and product name stand out more ■ Optimize for transportation ■ Select suitable materials from a wide variety ■ Consider improvements in loading efficiency *For more details, please refer to the PDF document or feel free to contact us.

  • tray

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Tray

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.