Last Updated： Aggregation Period:Mar 18, 2026～Apr 14, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Mar 18, 2026～Apr 14, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Mar 18, 2026～Apr 14, 2026
This ranking is based on the number of page views on our site.
331～360 item / All 1449 items
Standard cart with caster (steel press)
Standard cart with caster (steel press) ■□■Features■□■ ■Sturdy steel construction ■The press cart has a robust structure due to the pressing of thin steel plates. It comes in various types and has a maximum load capacity superior to that of plastic carts. ■For more details, please contact us.
Elevated platform expansion and modification lift platform vehicle
Elevating Platform Expansion and Modification Trolley ■□■Features■□■ ■The platform can be expanded to accommodate the size of the load. *However, this applies only to items deemed safe by Chubu Sangyo Co., Ltd. *The photo shows the platform area made of stainless steel to resist rust and corrosion. ■The trolley frame can also be extended and modified. ・In addition to expanding the platform, modifications can be made to stabilize the trolley. ・For long items, it is necessary to move the handle to the rear as it interferes with the load. This requires extending the trolley frame. ■For more details, please contact us.
Parts delivery lift cart
Parts Delivery Lift Trolley ■□■Features■□■ This is a lift table trolley specially modified for each level of the parts shelf trolley. Both trolleys are equipped with roller bearings for smooth movement. To ensure safety, bellows covers have been installed on the movable parts. Additionally, stoppers have been added to each shelf level. ■For more details, please contact us.
Lifting platform truck with load retaining frame
Lifting Trolley with Load Retaining Frame ■□■Features■□■ ■Due to the instability of wheeled loads on the platform, a frame has been provided for stabilization. ■By using a dedicated lifting trolley, safe transportation and lifting operations can be performed. ■Additionally, to enhance the efficiency of moving loads, a bridging board has been installed for transferring to the opposite workbench. ■Two additional casters with swivel brakes ■Installation of a minimum position maintenance stopper ■Frame is removable ■For more details, please contact us.
A lift cart that makes it easy to feed long thin steel plates into a machine.
Folding Long Material Elevating Cart ■□■Features■□■ ■This is an elevating cart that makes it easy to feed long, thin steel plates into machines. ■The front part of the loading platform is designed to be foldable. ■When trying to feed thin steel plates into a machine, the machine's legs may prevent the cart from being brought close enough. Therefore, the front part of the loading platform has been extended, and it is designed to be foldable to minimize space when not in use. ■For more details, please contact us.
A cart for safely ascending and descending between upper and lower levels to transport parts.
Elevating Cart with Safety Fence for Up and Down Processes This cart safely elevates and transports parts between upper and lower processes. ■□■ Features ■□■ It has been modified for use as a bridge between the upper and lower processes. First, the width of the legs was expanded to accommodate the width of the products. Next, a safety fence was installed on the front legs. Additionally, a retractable stopper was added to the tip of the fork. As a result, work between the upper and lower levels can now be performed efficiently and safely. ■ For more details, please contact us.
A type of lift cart commonly used in factories, warehouses, etc.
A type of lift cart commonly used in factories, warehouses, etc. ■□■Features■□■ It is safe with a drop prevention valve. Additionally, it is equipped with a device that doubles the lifting speed with a switch. The platform of the cart rises and falls, allowing for easy movement from workbenches, conveyors, etc., adjusted to the appropriate height, reducing strain. The operation is primarily done by stepping on a pedal to activate the hydraulic cylinder via a pump, raising the table. For lowering, you can stop it at any position by loosening the valve. Various functions and safety devices are added for ease of use. ■Quick Lift Device By turning the pedal to the left and stepping on it, the lift-up speed will double. (Excluding LT-H250-8S) ■Safety Device The drop prevention valve prevents the table from dropping suddenly. It is installed on the port of the hydraulic cylinder. ■For more details, please contact us.
High-lift table cart (manual)
High Lift Type Table Lift Cart (Manual) ■□■Features■□■ Compared to standard models, the maximum height of the platform rises nearly twice as high. Equipped with a descent prevention valve and a rapid lift device. The platform of the cart can rise and fall nearly twice as much as the standard type, making it suitable for high shelves. However, this means that the position of the descent endpoint is higher. The operation is primarily done by stepping on a pedal to activate the hydraulic cylinder via a pump, raising the table. Descent can be stopped at any desired position by loosening the valve. Various functions and safety devices have been added for ease of use. ■Rapid Lift Device By turning the pedal to the left and stepping on it, the lift-up speed doubles. ■Safety Device The descent prevention valve prevents the table from descending rapidly. It is installed on the port of the hydraulic cylinder. ■For more details, please contact us.
Corrosion-resistant stainless steel lifting cart
Corrosion-resistant stainless steel lift cart ■□■Features■□■ ■ Equipped with a drop prevention valve and a quick lift mechanism The main body of the cart is made of highly corrosion-resistant stainless steel, making it suitable for use in seafood processing plants, pharmaceutical factories, and more. The operation is primarily foot-operated, activating the hydraulic cylinder through a pump to raise the table. For lowering, the valve can be loosened to stop at any desired position. Additionally, various functions and safety devices have been added for ease of use. ■ Quick lift mechanism By turning the pedal to the left and stepping on it, the lift-up speed is doubled. ■ Safety device The drop prevention valve prevents the table from descending rapidly. It is installed on the port of the hydraulic cylinder. ■ For more details, please contact us.
Battery-powered lifting table cart
Battery-powered lifting table cart ■□■Features■□■ ■This is a lifting cart that operates the pump with a battery-powered motor to activate the hydraulic cylinder, allowing the platform to move up and down. ■The elevation of the cart's platform is performed electrically. You can control the ascent and descent using two buttons on a handheld remote. ■Equipped with a battery and charger, it can be charged anytime and anywhere as long as there is AC100V available. Additionally, the battery meter is color-coded in three colors for easy visibility of the remaining charge. ■For safety, it is equipped with a descent adjustment valve and an automatic load check valve. ■For more details, please contact us.
The perfect low platform cart for transporting heavy loads from a low position!
A lifting cart with an even lower height than smaller models, making work much easier. ■□■Features■□■ ■The loading table of the cart has a minimum height of 80mm, which is significantly lower compared to standard table lift carts. Standard table lift carts have a height of 210mm or more, making this model approximately 30% lower. ■It is ideal for transporting beer bottles and heavy loads from a low position. ■The low-height table lift is available in three types according to load and platform size, allowing for selection based on usage. The swivel casters come with brakes. ■Operation is primarily done by foot pedal, which activates the hydraulic cylinder via a pump to raise the table. For lowering, the valve can be loosened to stop at any desired position. ■For more details, please contact us.
A lift cart that allows for smooth transportation with a lifting function and conveyor.
Elevating cart with lifting function and conveyor for smooth transportation ■□■Features■□■ ■The cart's loading table can be raised and lowered, allowing for easy movement from workbenches and conveyors at the appropriate height, reducing strain. ■The operation is primarily foot-operated, activating the hydraulic cylinder via a pump to raise the table. For lowering, the valve can be loosened to stop at any desired position. Various functions and safety devices have been added for ease of use. ■By incorporating a conveyor, labor-saving work efficiency is achieved. ■With work guides and stoppers, measures against load collapse can also be implemented. ■For more details, please contact us.
A lift platform that achieves a minimum height of 95mm when lowered, making it easier to load cargo.
A lifting cart that achieves a minimum height of 95mm when the platform is lowered, making it easier to load items. ■□■ Features ■□■ ■ The cart's platform rises and falls supported by a mast (vertical column), allowing the lowest position of the platform to be lower and easier to load compared to ordinary table lifters. Additionally, by reducing the diameter of the front leg wheels and modifying the structure, a low height of 95mm can be achieved, making it convenient for transporting box pallets. ■ Since the platform table of the cart rises and falls, it can be adjusted to match the height of workstations, conveyors, etc., resulting in less strain. The operation is primarily done by stepping on a pedal to activate the hydraulic cylinder via a pump, raising the table. For lowering, the valve can be loosened to stop at any desired position. Various functions and safety devices have been added for ease of use. ■ Quick lift device: By turning the pedal to the left and stepping on it, the lift-up speed doubles (excluding the maximum load type of 200kg). ■ Safety device: Automatic load check valve. ■ For more details, please contact us.
You can move items from shelf to shelf at the right height! Lifter cart.
A lifter cart that raises the forks by pedaling the handle and can lower or stop them by opening and closing the valve knob. ■□■Features■□■ ■The forks of the cart can rise and fall, allowing for movement between shelves at the appropriate height with minimal effort. ■Operation is primarily achieved by pedaling the handle, which activates the hydraulic cylinder via a pump to raise the forks. Lowering can be done by loosening the valve, allowing it to stop at any desired position. Various functions and safety devices are included for ease of use. ■Quick lift device: By switching modes, the lift-up speed is doubled. ■Safety device: Automatic load check valve. ■For more details, please contact us.
Rust-resistant! A transport cart specifically designed for pallets, made with a lot of stainless steel.
Rust-resistant! A pallet transport cart that extensively uses stainless steel down to the finest details. ■□■Features■□■ ■This is a pallet transport cart that extensively uses stainless steel down to the finest details. ■It is highly resistant to rust and has exceptional durability compared to steel. It is also recommended for use in clean environments, making it ideal for food factories, pharmaceutical factories, and more. ■Operation is primarily done by pulling the handle towards you to raise the forks, lifting the load off the ground for transport. At the destination, you can lower the forks by operating the lever on the handle to release the load. This is strictly for lifting and lowering during movement; if you require a lifting function, please refer to a forklift cart. Additionally, various functions and safety devices have been added for ease of use. ■Safety devices: Automatic load check valve, valve cleaning device. ■For more details, please contact us.
Pallet transport cart for noise control in quiet work environments.
Pallet-specific transport cart for noise control in quiet work environments ■□■Features■□■ ■This cart is convenient for moving pallets (single-sided type) and equipment that can be inserted with forks from the bottom. ■The operation primarily involves pulling the handle towards you to lift the forks, which raises the pallet off the ground for transport. At the destination, you can lower the forks by operating the lever on the handle, allowing you to remove the pallet. This is strictly for lifting during transport; if you require a lifting function, please refer to a forklift cart. Additionally, various functions and safety devices have been added for ease of use. ■Safety device: Automatic load check valve and valve cleaning device. ■The low-noise design reduces the noise that can be bothersome to the ears when inserting and removing pallets. It is recommended for use in quiet factory environments, factories adjacent to residential areas, and for pallet work on mezzanines where noise is a concern. ■For more details, please contact us.
Hand truck with a hand brake for carrying ticketing machines used at the airport.
Low-floor hand truck with hand brake for ticketing machines used at airports ■□■Features■□■ ■Reducing the wheel diameter lowers the floor height but increases starting resistance. ■A hand truck that flexibly utilizes ticketing machines within the airport. - Keeps the height of the ticketing machine as low as possible and is equipped with a hand stopper and foot stopper for safety. - Uses low-floor heavy-duty casters embedded in the wheel box of the truck body, resulting in minimal gap between the truck and the floor. - The handle area uses larger diameter wheels in reverse. ■The key point is that it is low-floor and equipped with stoppers. - The structure extends the wheel box sideways or front and back to keep the loading platform as low as possible. - The casters on the swivel side are also low-floor heavy-duty casters. ■For safety, it is equipped with a double system: a handle stopper that stops when you let go of the handle, and a foot stopper that stops when you step on the pedal. *Both act as parking stoppers, similar to a car's handbrake. ■The hand stopper applies braking to a drum equipped on the wheel, while the foot stopper presses down on the rubber part of the wheel.
Low-bed cylinder transport cart
Low Bed Cylinder Transport Cart ■□■Features■□■ ■This cart is designed for transporting cylindrical loads, featuring a low bed design for easy loading and unloading. ■The wheels are mounted protruding sideways, using wheels with an outer diameter of 200mm. ■Casters: 200mm, swivel/fixed stopper: 2 each ■To lower the cart bed, the wheels are positioned outside the cart frame. The wheel box is designed to extend sideways to keep the bed as low as possible. ■Considering the turning range of the swivel casters, they protrude significantly sideways, so the stoppers are installed on the fixed side. ■For more details, please contact us.
Hand truck for loading onto transport trucks from inside the bank.
Hand truck for loading onto transport trucks from within the bank ■□■Features■□■ ■Multiple drawers, using lightweight materials except for the frame of the cart ■Casters: 130mm with 2 swivel locks and 2 fixed ■Drawers: 8 ■Doors: Double-opening with locks ■Efforts were made to reduce the weight of the cart. - The bottom frame and handle, which require strength as a cart, are made of steel pipes, while the columns of the upper framework are made of aluminum. - The panels (exterior boards) are made of plastic material, and the drawers are made of corrugated plastic. - Thanks to innovative materials, it is extremely lightweight. ■For more details, please contact us.
Hand truck for loading onto transport trucks from inside the bank.
Hand truck for loading onto transport trucks from inside the bank ■□■Features■□■ ■The top cover and side covers open, providing a large opening. Lightweight materials are used for everything except the frame of the hand truck. ■External dimensions: 933W × 586D × 1063H ■Casters: 130mm with swivel brakes/fixed, two of each ■Doors: Top cover and side covers open/close with locks ■Confirmation window available ■Efforts have been made to reduce the weight of the hand truck. - The bottom frame and handle, which require strength as a hand truck, are made of steel pipes, while the columns of the upper framework are made of aluminum. - The panels (exterior plates) are made of plastic material, resulting in an extremely lightweight design due to material innovation. ■For more details, please contact us.
Fish market wooden transport cart
Fish Market Transport Cart ■□■Features■□■ ■The floor material is made of Apitong wood. ■It has excellent abrasion resistance and water resistance. ■Can be manufactured with either a steel frame or a stainless steel frame. ■External dimensions: 1000W × 1600L × 900H ■Casters: 200mm swivel/fixed, 2 each ■With floorboard ■The loading platform floorboard is made of water-resistant Apitong wood. In the seafood industry, wooden boards are used instead of steel plates for the floorboard. This is because a water film on a steel plate can make the cargo slippery. Therefore, wooden boards are used, but they must not rot, which is why Apitong wood, which contains a lot of oil, is used. This cart uses it for both the floorboard and the backboard. ■For more details, please contact us.
Transport cart with invoice writing platform
Transport cart with a slip writing table ■□■Features■□■ ■When storing and retrieving items in a warehouse, a slip is always required. Having a work table nearby makes this process more convenient. The table has been attached to the handle section to improve usability. ■Casters: 130mm, with 2 each of swivel locks/fixed ■Includes a slip writing table ■With the presence of a work table, the cart can be used not only for transporting goods but also for assembly work, slip processing, as a step stool, and packaging tasks, among other things. It becomes an even better tool. ■For more details, please contact us.
Transform from a box to a cart! Box-shaped transport cart.
Transform from a box to a cart! Box-shaped transport cart ■□■Features■□■ ■Portable A3 size. ■Made of aluminum with a design featuring punched holes for weight reduction. ■When folded, the cart neatly becomes a box. ■External dimensions: approximately A3 size ■Casters: 50mm, swivel/fixed, two of each ■Folding type ■With the catchphrase "A cart born from a box," we designed it to ensure that the folded state has no protrusions, resembling a neat cosmetic box. Additionally, as a box, it is easy to load into vehicles like cars and does not get in the way. ■The finish is anodized to enhance the aluminum's shine. It is ideal for carrying heavy items like "rice" that can be cumbersome to hold by hand while shopping. A stylish portable cart that is convenient for various occasions. ■For more details, please contact us.
A cart that supports the center axis of the gas turbine at both ends for work and transportation.
A cart that supports the center axis of the gas turbine at both ends for work and transportation. ■□■Features■□■ ■The handle is removed during operation. Efforts were made to reduce weight to keep it within the range of manual pushing due to its heavy load. ■External dimensions: 1400W × 900D × 900H ■Casters: 200mm swivel x 2 / 200mm fixed x 2 ■The cart is constructed with a minimal framework to reduce weight. The framework was designed based on weight calculations, and components such as the steel plate on the loading platform were omitted. Additionally, to allow for precise positioning, the loading platform, both end frames, and handle are separated, with mounting holes processed as elongated holes for adjustment. ■Corner rubber is installed at all four corners of the cart and at both end frame corners to ensure safe operation. ■For more details, please contact us.
Office document transport cart (with folding mechanism)
Office Document Transport Cart (with Folding Mechanism) ■□■Features■□■ ■Office carts are required to be non-damaging to buildings, quiet, space-saving for storage, and aesthetically pleasing. This is especially demanded by owners of new buildings. ■The folding structure is a key feature of the document transport cart. When arranging an office, it seems that the storage space for the cart is often not considered. Therefore, when not in use, it needs to be space-saving, and when in use, it must have the capacity for the intended transport load. This cart achieves that balance. ■It is equipped with bumpers to prevent damage to buildings and cushioning casters to accommodate steps and other obstacles. ■For more details, please contact us.
Steel cart with 2-3 tier shelves handled by Chubu Sangyo Co.
This is an introduction to the "2-3 tier shelf steel cart" handled by Chubu Sangyo Co., which is engaged in the sale of industrial tires, manufacturing and selling transportation equipment and industrial vehicles, and manufacturing and selling construction and agricultural vehicles, as well as tire display fixtures. ■□■Features■□■ ■2-tier shelf standard caster cart (small) - Maximum load capacity: 150kg - Deck size: Steel - Cart weight: 17.2kg - Casters: Rubber wheels 100mm ■3-tier shelf standard caster cart (small) - Maximum load capacity: 150kg - Deck size: Steel - Cart weight: 23.4kg - Casters: Rubber wheels 100mm ■For more details, please download the catalog or contact us.
2WS turntable-style parent-child cart
Parent-child cart with a turntable for loading and transporting sub-carts ■□■Features■□■ ■ The left and right doors open and close, and the doors themselves serve as guide ramps for loading sub-carts ■ Large-capacity transport cart with a canopy ■ Tires are puncture-proof, using hub size 3.50-5 ■ Equipped with a 2WS turntable mechanism ■ External dimensions: 1850L × 1425W × 2210H ■ Low-floor design for easy loading of sub-carts ■ For other functions and details, please download the catalog or contact us.
A cart that can be easily used not only for 4WS towing but also for manual pushing.
A medium-duty cart equipped with a switching function that can be easily used not only for towing with a 4WS but also for manual pushing. ■□■Features■□■ The cart is towed by a powered vehicle from the receiving area to the production line, and from there, it may be detached and used as a manual push cart. Those who use it in this way will likely appreciate the switching function. Switching to the manual push cart is as simple as raising the towing rod. When the cart is detached from the towing vehicle, the towing rod can get in the way, so it needs to be lifted. This action disconnects the link, allowing it to be used as a "manual push cart." Since this is part of everyday operations, it can be considered a very simple switching function. ■For more details, please download the catalog or contact us.
4WS caster-type low-floor specification pallet transport cart
4WS Caster-Type Low Floor Specification Pallet Transport Cart ■□■Features■□■ ■The cart is designed with a low floor, allowing the casters of the loaded pallet to drop into designated holes on the platform, making it easier to retrieve parts from the pallet. ■Uses RGJHW150 casters for heavy loads. ■For more details, please download the catalog or contact us.
A cart equipped with measures to prevent load collapse and for cold weather conditions.
Cart designed to prevent load collapse and for cold weather measures ■□■Features■□■ ■Uses 100mm mesh for the load collapse prevention net, reducing weight ■Rubber is applied to the loading platform to prevent movement of cargo ■Designed with anti-rust coating for de-icing agents due to snow-covered areas ■Uses puncture-proof tires with hub size 3.50-5 ■Maximum load capacity of 1200kg ■For more details, please download the catalog or contact us.
