Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
1～30 item / All 81 items
Digital Metal offers titanium alloy Ti64, which has high strength, hardness, toughness, and excellent corrosion resistance.
Ti64 has the following characteristics: - Excellent corrosion resistance - High strength and hardness - 4-5% lighter than general steel materials - Biocompatible
Reliable and high-quality with integrated management of in-house inventory and processing! Ti64 alloy plates and round bars.
At Tokyo Titanium, we handle plates and round bars made of "Ti64 alloy." The plates are processed using shearing, saw cutting, and water jet cutting methods. We also provide high-quality round bars with short delivery times. Our company manages inventory with marking identification, allowing for identification even in finely cut states, ensuring thorough management from material to quality. 【Features】 ■ Long experience and abundant inventory ■ Trusted high quality ■ Processed into plates and round bars ■ Integrated management of in-house inventory and processing ■ Inventory management with marking identification *For more details, please refer to the PDF document or feel free to contact us.
Titanium alloy (Ti-6A/-4V) parts
Processing of titanium alloy materials and processing of two types of titanium materials.
Many successful adoptions by major muffler manufacturers! Achieved lightweight mufflers!
"Super-TIX Titanium" is a titanium alloy developed by Nippon Steel. It has excellent cold workability, enabling the thinning (lightweighting) of mufflers. It is adopted by many Moto GP vehicles and major muffler manufacturers. 【Features】 ■ Higher high-temperature tensile strength than pure titanium ■ Higher high-temperature fatigue strength than pure titanium ■ Better oxidation resistance than pure titanium ■ Workability equivalent to pure titanium ■ Good weldability High-temperature strength: High strength at temperatures above 600°C, with minimal changes over long-term use Oxidation resistance: Minimal reduction in thickness at high temperatures above 800°C Formability: Bending, stretching, and drawing properties comparable to or better than Ti-2 Weldability: Weldability comparable to Ti-2
High antibacterial property, biocompatibility and a low Young's modulus close to the cortical bone
A requirement for biocompatible Ti alloy for orthopedic implants is to suppress stress shielding, which occurs because of the large difference between Young’s moduli of the prosthetic stem and the cortical bone (10–30 GPa). Meanwhile, conventional autoclave sterilization before implant exhibits the discoloration and heaviest particulate contamination, and some multiple sterilization regimens for metallic materials may pose serious biological concerns. The present invention can provide the necessary functions to a Ti implant material without impairing the low Young's modulus of Ti alloy. It possesses high antibacterial properties with a high antibacterial activity value above 2.0 from the antibacterial test (JIS R 1702) and osseointegration fromhydroxyapatite formation on the surface of Ti alloy in simulated body fluid.
We offer a wide range of standards, including AMS and ASTM. Please feel free to contact us for small lot prototypes, research and development, and milling processing, etc.
We offer small quantities and short delivery times for AMS4911 (6Al-4V) titanium plates! If you need just 10mm, want immediate delivery, need milling, or surface polishing, please feel free to consult with us. We accept various requests from research and development departments of companies for test pieces, prototypes, and more. Titanium alloy 64 (Ti6AL-4V) has excellent properties, with a tensile strength more than 1.7 times and a yield strength more than 3.8 times that of pure titanium (TP270, TP340). We handle everything from small lots for prototypes and research to mass production for aircraft, robot-related parts, plants, pumps, semiconductor equipment, heavy industry, and more. We also accommodate processing tailored to customer needs. Although titanium is known as a difficult material to machine, our Suzuka factory is equipped to handle titanium processing, so please consult with us. In addition, we offer other titanium alloys (Ti6AL-4V) such as round bars ASTM F136 (ELI material) TAB6400H/ASTM B348, and bolts. ■AMS4911 ■AMS4928 ■TAB6400H/ASTM B348 (Gr.5) ■ASTM F136 (ELI material) ■ASTM B265 (Gr.5)
Drill for super heat-resistant alloy difficult-to-cut materials
The optimal carbide for heat-resistant alloys achieves both wear resistance and chipping resistance. In addition to wear resistance and heat resistance, the adoption of the highly lubricating Aqua EX coating ensures a long lifespan.
New ultra-fine super hard alloy from Japan's special alloys! It will change the history of super hard alloys from now on.
The "SCPT alloy" is a revolutionary alloy that achieves ultra-fine particle size by uniformly arranging ultra-fine particles of Ti(C,N). This product exhibits high strength and outperforms conventional cemented carbides used for cutting tools and wear-resistant tools. Please feel free to contact us when you need assistance. 【Features】 ■ High strength (high resistance) ■ Performance that surpasses cemented carbides * For more details, please refer to the PDF document or feel free to contact us.
You can use 6061, which combines high machinability, strength, and weldability, as well as 7075, which is one of the materials with the highest strength class!
"Metal X" is a 3D printer that can use "aluminum alloys (6061 & 7075)" as materials. It can utilize 6061, which combines high machinability, strength, and weldability, and 7075, one of the materials with the highest strength among aluminum alloys. Please feel free to contact us if you have any inquiries. 【Other available materials】 ■ Stainless steel (17-4 & 316L) ■ Tool steel (A-2 & D-2) ■ Inconel (625) ■ Titanium (Ti-6AI-4V) *For more details, please download the PDF or feel free to contact us.
Formation of high-strength / high-rigidity / high heat-resistant Mo alloy that can be cast (able to melt under 2000℃)! Equivalent to Ni-based alloy!
Currently, molybdenum alloys are formed by extrusion of powder sintered bodies due to their high melting point. Therefore, cutting is required in order to form complex shapes, which increases the manufacturing cost. In addition, if a body is formed by the powder sintering, the strength is decreased. In this invention, light / high strength / high heat resistance molybdenum alloys can be easily fabricated by the melting and casting method, which can be applied for complex shapes. New molybdenum alloys with melting point below 2000℃.
![[Analysis Case] Vanadium Alloy for Nuclear Fusion Reactors](https://image.mono.ipros.com/public/product/image/64e/2000778259/IPROS37005402603373918709.png?w=280&h=280)
Low radiation, high temperature strength, and radiation resistance! Daido Analysis Research can also assist in the development of new materials!
We would like to introduce the production of vanadium alloys for nuclear fusion reactors. The main components are V-4Cr-4Ti. It features low radioactivity, high-temperature strength, and radiation resistance (resistance to neutron embrittlement), and is produced as a world-standard test material through large-scale melting with extremely low O, N, and C content using EB and VAR melting. Daido Analysis Research will assist in the development of new materials. We can also propose compositions tailored to your objectives. 【Features】 ■ Extremely low O, N, C content material produced by EB and VAR melting ■ Good fracture toughness and weldability due to low impurity levels ■ World-standard test material produced by large-scale melting ■ Excellent hot and cold workability (under the guidance of the National Institute for Fusion Science, Ministry of Education, Culture, Sports, Science and Technology) *For more details, please refer to the related links or feel free to contact us.
![High corrosion-resistant and heat-resistant alloy [Special Metal Excel]](https://image.mono.ipros.com/public/product/image/ed4/2000551697/IPROS45985974740901694057.jpeg?w=280&h=280)
Minimum lot of 50kg or more! We will adjust the quality to meet your requirements with our technology.
Materials based on Ni, Co, and Ti offer superior corrosion resistance and heat resistance compared to stainless steel. The Tokkin Group supplies products that comply with the European RoHS directive under thorough quality control. 【Scope of Supply (Coils, Sheets, Foils)】 The following dimension ranges are guidelines for products manufactured by us. Since they vary by material, please contact us if you have specific specifications in mind. ■ Thickness: 0.01mm to 1.00mm ■ Width: 3mm to 300mm ■ Minimum Lot: 50kg and up ■ Shortest Delivery Time: 3 weeks [Procured Items] In addition to cold-rolled strips manufactured by us, we also flexibly accommodate orders for thick plates, wires, bars, and ultra-thin pipes from domestic and international partner companies. ■ Wire ■ Bar ■ Pipe *Please inquire about availability for fluid items. *For more details, please refer to the PDF document or feel free to contact us.
High nickel and chromium content provides great resistance to oxidation and carburization at high temperatures!
"Aloy 800H/800T (UNS N08810/N08811)" is a high-nickel heat-resistant steel that possesses excellent strength, corrosion resistance, and oxidation resistance at high temperatures, characterized by high structural stability at elevated temperatures. Furthermore, it is an alloy with high creep strength achieved through grain size control via high-temperature heat treatment and control of C, Ti, and Al content. It also exhibits excellent high-temperature strength and does not suffer from embrittlement due to sigma phase precipitation during high-temperature use, making it widely used for heat-resistant applications. [Features] - Workability at hot and cold temperatures is almost the same as austenitic stainless steel. - Welding is possible using TIG, MIG, and coated arc welding. - Heat treatment: solution heat treatment at 1100–1170°C with rapid cooling / solution heat treatment temperature above 1121°C (UNS N08810). - Excellent corrosion resistance in oxidative corrosive environments such as nitric acid and in molten salts like sodium chloride. - Stress corrosion cracking sensitivity is superior compared to standard austenitic stainless steel. *For more details, please refer to the PDF document or feel free to contact us.*
Explanation materials on the basic knowledge of Nitinol - Detailed explanation of phase transformation, measurement methods for transformation temperature, superelasticity, and shape memory effect, including the underlying principles.
Shape Memory Alloys (SMA) are unique metals that can return to their original shape when they reach a specific temperature. SAES's group company, memry, boasts the world's largest production capacity of Nitinol (Ni-Ti) and has nearly 30 years of experience in low-invasive medical devices such as stents, catheters, and guidewires. Nitinol often cannot directly apply the characteristics, design concepts, and manufacturing processes of conventional metal materials, requiring a wealth of knowledge and expertise in handling. Please utilize this document to expedite the learning process for companies and engineers who are using Nitinol alloys for the first time.
No use of dissolving crucibles! This is titanium powder with no contamination from impurities.
"TILOP, TILOP64" is titanium powder produced using the IAP method without the use of a melting crucible, ensuring no contamination from impurities. By spraying argon gas and finely dividing the molten metal for rapid cooling and solidification, we can obtain spherical powder with a fine microstructure. We also have a proven track record of producing cost-effective spherical fine powders using our unique mass production technology. Please feel free to contact us for more information. [Features] - No melting crucible used - No contamination from impurities - Spherical powder with a fine microstructure *For more details, please refer to the catalog or feel free to contact us.
The only company that offers welding rods that make TIG welding of SUS and brass, iron and copper, and iron and copper alloys easy.
Introducing Copper Alloy Tig Welding Rod MTA-YB5 A welding rod has been developed that makes it easy to weld materials that were previously difficult to join, such as iron and non-ferrous metals, or between copper alloys. This copper alloy Tig welding rod is used by over 100 companies. Please give it a try.
Titanium carbide powder with a wide range of applications such as superhard alloys, wear-resistant materials, and heating shield coatings.
◆Applications Titanium carbide is primarily used in steel-bonded cemented carbide, cermet components, tungsten-cobalt-titanium cemented carbide, and wear-resistant materials, and is also used as a heating shield coating. Titanium carbide powder has high hardness, corrosion resistance, and thermal stability, and can improve the wear resistance of alloys, steel bearings for polishing, nozzles, and cutting tools. ◆Chemical Properties Molar Mass: 59.89 g/mol Appearance: Black powder Density: 4.93 g/cm³ Melting Point: 3,160°C Boiling Point: 4,820°C Solubility in Water: Insoluble Crystal Structure: Cubic
Delivery date: Shipping on the 9th working day, express delivery: Shipping on the 6th working day!
We would like to introduce the ball-type electroplated grinding stone 'TIR' with a shaft, designed for ultra-hard alloy and die steel mirror surface processing, provided by Risumotool Co., Ltd. The ball radius is R0.3, and we offer products with an outer diameter of 0.6, an electroplated length of 3, and a straight length of 4, among others. Please feel free to contact us when you need assistance. 【Product Lineup (Excerpt)】 ■ Ball Radius ・R0.3 ・R0.4 ・R0.5 ・R0.75 *For more details, please download the PDF or feel free to contact us.
A stress-free glasses life with smooth temple opening and closing!
The "Optical Smooth Washer" is a metal hinge washer coated with a solid lubricant to enhance sliding functionality. The opening and closing of the temples is smooth, and the effect lasts. It has a high heat resistance specification of 600°C, and brazing and plating are also possible. Due to its excellent chemical resistance, it is strong against nitric acid and hydrofluoric acid. 【Features】 ■ Stress-free and comfortable eyewear life ■ High heat resistance ■ Excellent chemical resistance ■ Complies with food hygiene standards *For more details, please refer to the PDF document or feel free to contact us.
If you wish to place an order exceeding the specified number of items listed in the catalog, please consult our customer service.
We would like to introduce the square-type electroplated grinding wheel 'TIS' for ultra-hard alloy and die steel mirror surface processing, provided by Risumotool Co., Ltd. The product lineup includes items with an outer diameter of 0.6, an electroplated length of 2, a straight length of 4, and a shank diameter of 4.0. The shape of the slit and countersink varies depending on the tool. Please feel free to contact us when placing an order. 【Product Lineup (Excerpt)】 ■ Outer Diameter ・0.6 ・0.8 ・1.0 ・1.5 *For more details, please download the PDF or feel free to contact us.
Alloy tailored to the production needs of rotors and stators.
We offer the carbide grade 'CF-H40S+'. The CF (Corrosion-free) grade is a carbide alloy specially developed for the mold and tool industry, recognized as a genuine corrosion-resistant carbide alloy (CF grade). It is widely used by many customers as blanks for press and punch processing of rotor and stator sheet components for electric motors. This product, which is a representative of our corrosion-resistant carbide materials (CF grade), has proven its true corrosion resistance over many years. Its continued selection by leading companies in the industry is evidence of its quality. Please feel free to contact us if you have any inquiries. *For more details, please download the PDF or feel free to contact us.
Dioxygen has excellent properties as a superconducting material.
Niobium exhibits excellent properties as a superconducting material. - Low critical temperature - High critical magnetic field - Strong current resistance Niobium-titanium (NbTi) is the most widely used. Standard NbTi is an alloy composed of niobium and titanium. For industrial use, the titanium content ranges from 20% to 60% (wt%). A representative niobium-titanium alloy has a titanium content of 66% (approximately 50% by weight). We can accommodate various sizes in small lots and with short delivery times for each shape.
Innovation nurtured by tradition. Featuring various types of alloys!
The "Resistive Alloys & Thermoelectric Alloys Comprehensive Catalog" is a comprehensive catalog from NEXTECK that handles resistive alloys and thermoelectric alloys from the German company Isabellenhütte. [Contents] ■NOVENTIN ■MANGANIN ■ISAOHM ■ZERNIN 30, etc. *For more details, please contact us or download the catalog. *This catalog is available in English.
As a titanium alloy, we have succeeded in mass-producing φ20μm wires, which are among the smallest in the world! A new material that is gentle on humans! Nickel-free biomaterial.
"Nifreet" is a nickel-free alloy with excellent biocompatibility, physical properties, corrosion resistance, and workability. It can be used under MRI conditions and ensures X-ray visibility. It does not cause allergic reactions. It can be used for various applications, including medical instruments, catheters, and cardiac pacemakers. 【Features】 ■ High tensile strength comparable to Ni-Ti ■ Young's modulus similar to human bone ■ High elastic limit ■ Non-magnetic ■ Visibility close to platinum 【Exhibition Information】 ■ Exhibition Name: Medical Creation Fukushima 2022 ■ Venue: Big Palette Fukushima ■ Dates: October 27, 2022 (Thursday) 10:00 AM - 5:00 PM October 28, 2022 (Friday) 10:00 AM - 4:00 PM ■ Booth No: A-33 ■ Exhibited Products: 1) Biocompatible Material NiFreeT 2) New Medical Titanium Alloy Material Ti-MIM 3) IAT Implant System "IAT EXA PLUS" 4) DLC Coating 5) 3D Additive Manufacturing *For more details, please refer to the catalog or feel free to contact us.
At room temperature, it is soft and easy to bend! An alloy that combines the noble properties of Cu and the passivation properties of Ni.
"Aloy 400 (UNS N04400)" is an alloy that combines the noble properties of Cu and the passivation properties of Ni, offering excellent corrosion resistance. It is used in seawater desalination plants, heat exchangers, and marine construction coatings. Welding can be performed using TIG, MIG, coated arc welding, and resistance welding. For MIG welding, YNiCu-7 is recommended. 【Features】 ■ At room temperature, it is softer than SUS 304, making bending and processing easy. ■ Welding can be done using TIG, MIG, coated arc welding, and resistance welding. ■ Annealing is performed at 700–900°C, and rapid air cooling is desirable. *For more details, please refer to the PDF document or feel free to contact us.
A lineup of high-quality products with excellent cost-effectiveness!
This catalog is a comprehensive catalog featuring cutting tool materials handled by CY Carbide Japan Co., Ltd., from CY CARBIDE MFG Co., Ltd. We introduce high-quality materials suitable for cutting tools used in industries such as aerospace, IT, and automotive. 【Featured Products】 ■ RSI Series: Polished Round Bars / Black Skin Round Bars ■ R2H30 Series: 2-Hole Spiral (30° Twist) Polished Products / Black Skin Products ■ RH03D3/RH03D4 Series: Blanks for 3D Applications ■ R1SH Series: 1-Hole Straight Polished Products / Black Skin Products ■ High Precision Modular Shanks, etc. *For more details, please download the PDF or feel free to contact us.
Specific gravity is less than one third of Nitinol! The lightest superelastic alloy worldwide without allergic elements
Conventional superelastic and shape-memory alloys are generally composed of elements having high specific gravity, and the ones composed of lightweight elements have not been reported yet. Although superelastic and shape-memory alloys for medical applications are being intensely investigated, a typical TiNi alloy (Nitinol) is still difficult to apply to patients owing to allergic effect caused by nickel. The present invention provides superelastic and shape-memory alloy having the specific gravity less than one third of Nitinol by using magnesium. As well known as the good biocompatibility of magnesium, the alloy is expected to be applied to medical field.
We will also introduce product examples that leverage a high young's modulus! Information on its use in internal grinding processing is also included.
This document explains the rigidity of cemented carbide and cemented carbide quills in the newsletter "THE TOUEI TIMES" published by Toei Super Hard Co., Ltd. Cemented carbide has various characteristics, and this issue introduces Young's modulus (rigidity). There are also product examples that utilize high Young's modulus. Additionally, you can see how our cemented carbide quills are used for internal grinding, so please make use of this information when considering implementation. [Contents] ■ Cemented carbide has a high Young's modulus! ■ Cemented carbide quills for high rigidity internal grinding ■ We also use "cemented carbide shanks" in-house ■ A word from this issue *For more details, please download the PDF or feel free to contact us.
A rich lineup from aerospace standards to Japan Steel Works' Super-TIX. Adopted in a wide range of fields such as battery cases and semiconductor equipment.
Our company sells "high-strength titanium alloys" that have excellent properties with a tensile strength of over 1.7 times and yield strength of over 3.8 times that of pure titanium (TP270, TP340). Among these, the AMS standard titanium alloy 64 has a tensile strength of 895 MPa, making it highly strong. We offer a wide range of options from small lots for prototypes and research to mass production. We also accommodate various processing needs such as cutting, machining, pressing, multi-angle roll forming, welding, and surface treatment, allowing us to meet diverse requests like "I only need 10mm," "I want it delivered immediately," or "I want it milled." This material is utilized in various applications such as 3D printer base plates, battery cases, semiconductor equipment, aircraft, and robot-related parts. 【We solve the following challenges】 ■ For those struggling with insufficient strength ■ For those concerned about machinability ■ For those considering weight reduction *For more details, please refer to the materials. Feel free to contact us with any inquiries.
The oxidation resistance at high temperatures is extremely good! It can be used for long-term continuous air oxidation and in various atmospheres.
"Aloy 600 (NCF600, UNS N06600)" is a high-grade heat-resistant alloy that contains 14-17% chromium and exhibits exceptional oxidation resistance at high temperatures. It also has a wide range of applications as a corrosion-resistant alloy with excellent resistance to various acids and alkalis. The heating temperature is 1150-1180°C, the hot working temperature is 1000-1180°C, and light processing is possible up to 850°C; however, cracking may occur in the temperature range of 650-850°C. Cold workability is easier than that of austenitic stainless steel and is similar to Monel. [Features] ■ Hot working is relatively easy ■ Welding can be performed using TIG, MIG, and covered arc welding, similar to standard austenitic stainless steel ■ Cutting is possible with high-speed steel tools ■ Excellent resistance to nitrogen, hydrogen, and carburizing *For more details, please refer to the PDF document or feel free to contact us.
